Latest burners Tenders | Government burners Tenders

CTN :40405363

23 Jun, 2025 12.20 Crore

Netanar - Chhattisgarh

Tender For bid to ras custom bid for services - operation and maintenance of mobile equipment at nsl for a period of 01 year in 3 mtpa isp at nagarnar near jagdalpur, chhattisgarh state-nmdc steel limited has setup up a 3.0 mtpa integrated steel plant at nagarnar, chhattisgarh with coke oven, sinter plant, blast furnace, steel melting shop, thin slab caster, hot strip mill route and other auxiliary units- 2. contractor s scope of work/supply/responsibility: brief description of scope of work (not limited to) needs to be carried out by successful bidder 1. to carry out operation of mobile equipment as mentioned in annexure a by deputing skilled, qualified and experienced manpower. 2. to carry out maintenance of mobile equipment as mentioned in annexure b by deputing skilled, qualified and experienced manpower. 3. to maintain and operate the effluent treatment plant specially made for fmd as per environmental norms. 4. deployment of at-least the prescribed minimum strength of experienced manpower as indicated in clause no. 5.0 to successfully execute the operation & maintenance activities, with a provision to keep reserve in each manpower-category (if required) to meet the minimum daily requirement for round the clock operation and maintenance. 5. all the tools tackles and special tools including diagnostic tools like: mechanic tools, electrician tools, welder tools, tyre fitter tools, special tools, lifting tools, hydraulic pressure testing kit etc. required for operation & maintenance and repair of mobile equipment is in bidder s scope. separate tools should be available for site maintenance team and shop floor team. all tools and tackles should be tested and certified by third party. 6. all the shift personnel will report to respective shift supervisor of the successful bidder administratively. the shift supervisor shall be decided by bidder in consultation with nsl. bidder shall organize all the jobs of o&m with the help of their supervisors/ engineer and they shall coordinate continuously with nsl to carry out the operation and maintenance activities. 7. operation and maintenance of mobile equipment shall be carried out on 24 x 7 basis including sundays and holidays on a shift-wise basis (four shifts [a, b, c & g]. i. for operation: 1.operation of all the equipment will be in all shifts as and when required as listed in annexure a. 2.inspection report of vehicle will be prepared by bidder and approval of the same will be obtained from nsl. a.preventive maintenance: 1. checking/ adding/ replacing engine oil, hydraulic oil, brake oil, def level etc.; 2. checking and cleaning oil filter; 3. checking and adding/replacing engine coolant as the case may be; 4. checking fuel level and adding fuel if required; 5. checking and cleaning of fuel and air filters; 6. checking hydraulic filters, hoses, seal, o-ring etc.; 7. checking electrical switches, relay, fuse, bulb etc.; 8. battery charge level checking and charging & battery maintenance/cleaning; 9. checking all the safety devices like back horn, seat belt, camera, beacon light etc.; 10. check air pressure in tyre and check wheel nut tightness; 11. checking and adjustment of transmission, alternator and other belts and chain drive; 12. cleaning and washing of the vehicles; 13. maintaining good housekeeping of washing ram; 14. cleaning of operator/driver cabin; 15. greasing in all points; 16. apply cardium compound on wire rope/crane rope; 17. any other activity as required. b. periodic maintenance 1. engine oil change; 2. replacing fuel filter; 3. replacing oil filter; 4. changing of air filter kit; 5. change of steering filter; 6. gear box oil change; 7. rear axle oil change; 8. power steering oil change; 9. replacement of coolant; 10. carrying out tyre inflation and repair; 11. welding and gas cutting works; 12. housekeeping work of the repair shop; 13. cleaning and washing of the vehicles. c.breakdown maintenance: in case of breakdown of any mobile equipment as listed

Central Government/Public Sector

CTN :40754113

28 Jun, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For custom bid for services - non-core maintenance activities in m&s-1. the scope of work includes carrying out the following non-core activities of maintenance and services department at bhelpppu, thirumayam as per instructions of maintenance in-charge. as per bhel estimate, it requires indicative 2 no. of unskilled labours daily to complete all the below activities. 1. cleaning of machines, components, oil spilled area during and after maintenance. 2. movement of spares, components and consumables for maintenance. 3. maintenance assistance for heavy works. 4. handling of lubricants, hydraulic oil, gas cylinders and diesel. contractor's scope: aa) cleaning of machines, components and oil spilled areas during and after maintenance: 1. cleaning of sub-assemblies and dismantled components while attending the break-down of machines. 2. cleaning of machine bottom floor, facility bottom floor and hydraulic power pack surrounding area as and when required. 3. cleaning of the machine surface and other accessories & fixtures of the machines for trouble shooting and to access the machine components during maintenance. 4. cleaning of the machine, floor area after attending the breakdown. all the spillage oil, oil soaked cotton waste, refractory wastes and other scrap wastes generated during maintenance to be removed from the surroundings of the machine and moved to the waste bins. 5. cleaning of oil, chips and dust inside and outside machine pit and intricate areas of machines while attending maintenance. 6. cleaning of machine components, filters and stand-by sub-assemblies with suitable cleaning agents. 7. cleaning of machines under shifting and assisting the fitters & electricians for dismantling, shifting and re-erection activities. 8. cleaning of crane parts at the top of the cranes and at the floor level are to be done as per instruction of maintenance in-charge. bb) movement of spares, components and consumables for maintenance: 1. movement of machine components from machine area to work bench and vice versa. 2. movement of raw materials for spares manufacturing to the respective machine shop. 3. movement of spares, consumables, raw materials, gas cylinders, etc., from stores to respective maintenance sections/areas and vice versa. 4. movement of heavy duty cables and cable drums from storage area to work place and vice versa. 5. movement of waste / scrap material to the respective disposal area. 6. movement of crane parts and lifting tackles during maintenance and for testing. 7. movement of furnace castings, refractory bricks, castables, refractory cement, ceramic wool, etc. for furnace maintenance. cc) maintenance assistance for heavy works: 1. assistance in activities like cable laying, dragging, winding, etc. 2. loading & unloading of lpg cylinders, refractory materials, machine parts, etc. from transport vehicles. 3. assisting in loading & unloading of machines / machine parts during erection and shifting of machines as and when required. 4. assistance in various maintenance activities involving heavy works like tightening / loosening of heavy duty fasteners, removal & assembly of heavy bearings, etc. 5. handling of heavy parts of the machine during maintenance. dd) handling of lubricants, hydraulic oil, gas cylinders and diesel: 1. cleaning of lubrication and hydraulic system of machines fairly without any oil traces. 2. assisting fitters for changing the worn out/damaged parts such as hoses, valves, high pressure pipe fittings, filters, etc., while doing maintenance of the systems. 3. assisting in oil top up/replacement with proper grade of oil in the respective hydraulic / lube oil tanks and gear boxes in the machines / equipments. 4. assisting in greasing of machines, cranes and facility items at pppu. all greasing points in the plummer blocks, pillow blocks, guide ways, machines greasing points are to be filled with necessary grade of grease manually or using grease gun wherever possible. 5. collect

Central Government/Public Sector

CTN :40793466

18 Jul, 2025 NA

Multi City - Multi State

Tender For repair/ retro fitment of one number diesel fired furnace to compressed bio gas (cbg) / bharath metal cutting gas(bmcg) fired furnace (of-7) at fabrication and smithy shop of central workshops/goc through open tender in ireps portal for contract period of three months

State Government

CTN :40751684

01 Jul, 2025 13.13 Crore

Jaipur - Rajasthan

Tender For supply of 29 types of laboratory instruments bid- analytical balance, 05 digits. , bod incubator, capacity 250-300 ltr. , conductivity meter , cod digester with condensers , centrifuge , deep freezer (chest type) , digital portable barometer , double distillation water assembly , fly gas analyzer , filtration assembly with suction pump for , suspended solids , heating mantle , high volume sampler , hot plate with magnetic stirrer , hot air oven , muffle furnace, 800-1000 degree , noise level meter , ph meter , pm 2.5 sampler , refrigerator (2 doors) , respirable dust sampler , specific ion meter for nitrate and fluoride , stack monitoring kit , turbidity meter , total kjheldal nitrogen analyses , uv-visible spectrophotometer real double beam , visible spectrophotometer , weather station for metrological parameters , water bath , thermometer (digital)

CTN :40753305

04 Jul, 2025 NA

Allahabad - Uttar Pradesh

Tender For supply of laboratory equipment product -compound microscope , binocular microscope , centrifuge , ph meter , colorimeter , weighing balance 1 mg , haemoglobinometer , glucometer , electrophoresis apparatus (complete set), chart cabinet with sunmica, slide, cover slips, test-tube, beakers 50ml, beakers 100ml, beakers 250ml, beakers 500ml, wide mouth bottle (500ml), watch glass, (polypropylene)/5dozen, petridish (polypropylene-90mm/25piece, conical flasks 250ml, conical flasks500, test tube stand, pipette stand tripod stand, micropipetter, micropipetter, micropipetter, graduated measuring cylinders, graduated measuring cylinders, graduated measuring cylinders, chromatography jars with lid., light microscope, disecting microscope, binocular, incubator, hot air oven, autoclave, centrifuge, water bath, hot plate, heating mantle, dissection tray, d.o. bottles, xylol, dibuty1 phthalate in xylene (dpx), glycerine, formalin, tissue paper, aluminium, forceps, inoculation needles, cotton, tray, test tube holder, glass road, litmus paper (ph indicator, strips), microtips, microtips, microtips, eppendorf tube, staining bottle, autoclave, incubator shaker, laminar air flow, bod incubator, digital ph meter, soil water ananlysis kit, electronic weighing balance(1mg-1000mg) (1gm-1000gm), digital conductivity meter, nesselrs cylinders (500 ml), nesselrs cylinders (1000 ml), dessicators (100mm), dessicators (250mm), filtration assemble all glass filter holder-47mm, flask for filter holder (1000ml), research binocular microscope, turbidity meter, soil thermometer apparatus, arc auxanometer apparatus, photo electric apparatus, compound microscope, micropipette range 0.2-20 ml box & tip, micropipette range 10-100 ml box & tip, micropipette range 100-1000 ml box & tip, water bath, light microscope, dissecting microscope, hot plate, computer (desktop+printer), cotton, tray, xylol, glycerine, formaline, filter papers, burners, absolute alcohol, eppendorf's tube (1ml), pipette, specimen cupboard, exhibition table, blotting paper, paraffin tape, t100 thermal cycler, bench top orbital shaking incubator, deep freezer, refrigerated microcentrifuge, laminar air flow cabinet, midi sub preparation system, power supply for electrophoresis, tissue culture rack, automatic 0.01 digital conductivity meter, multi parameter pocket testers 35 series, digital balance, western blott unit, slab polyacrylamid e gel electrophoresis, digital weighing machine, water purification system, elisa plate reader with printer, digital analytical balance, centrifugal machine automatic, melting point apparatus, tlc complete set, digital/steel calorimeter, hot plate with magnetic stirrer, heating mantle 500 ml, portable ph, conductivity and tds meter, tlc uv cabinet, micropipette, centrifuge tube, boling point assembly, dropper pipettes, chromatography jar, whatman filter paper, chromatography paper, chromatography paper, porus plate, ring/retort clamp with. burette stand, spatula metallic, test tube holder, test tube cleaning brush, ph paper, magnetic needle medium, chemical shelf, digital colorimeter, water distillation, water distillation, digital hot air oven, soxhlet apparatus, beaker, beaker, beaker, beaker, beaker, buckner funnel, buckner funnel, chromatography column, sintered glass crucible, clay pipe triangle, clay pipe triangle, conical flask, conical flask, conical flask, conical flask, flat bottom flask, glass rod, specific gravity hydrometer, specific gravity hydrometer, universal hydrometer, measuring cylinder, measuring cylinder, measuring cylinder, meanning flask, measuring flask, measuring flask, pipettes, pipettes, round bottom flask, round bottom flask, round bottom flask, separating funnel, silica crucible, silica crucible, spatula, stalagamometer, chemical thermometer, chemical thermometer, titration flask, titration flask, tongs crucible, stop cork, watch glass, watch glass, watch glass, wire gauge, tripod stand, distillation set - complete flask, si

CTN :40706450

14 Jul, 2025 1.07 Crore

Multi City - Karnataka

Tender For supply and installation of scientific instruments to centre of excellence for multidisciplinary advance research facility cemarf at, vijayanagara sri krishnadevaraya university, jnanasagara campus, ballari- (call -2) - analytical balance, electrochemical workstation, gas chromatography mass spectrometer (gc-ms), atr fourier transform infrared spectrometer, high temperature muffle furnace, gel documentation instrument, light microscope with camera (l), semi-automated microtome, nanodrop uv-vis spectrophotometer (n)

Central Government / Public Sector

CTN :40119290

25 Jun, 2025 NA

Panipat - Haryana

Tender For corrigendum : supply of burners for dryer packages - item no. 10 sap code 1399960051 , item no. 20 sap code 1399960061 , item no. 30 sap code 1399960071 , item no. 40 sap code 1399960081 , item no. 50 sap code 1399960091 , item no. 60 sap code 1399960101

corporations/Associations/Others

CTN :40241512

23 Jun, 2025 NA

Ranchi - Jharkhand

Tender For corrigendum : supply of spare parts of q8 magellan oes -rare gas purifier model no. mp , furnace heater, p/n 3057 , power supply, high voltage 24 vdc/2kv/5ma, part no. 100928 , spare part package power supply source, part no. a48d10

Corporations/Associations/Others

CTN :40720085

20 Jun, 2025 NA

Lonavala - Maharashtra

Tender For quotation for the maintenance of gas cremation furnace and kailasnagar smashanbhoomi premises

State Government

CTN :40383699

03 Jul, 2025 3.28 Crore

Kheda - Gujarat

Tender For corrigendum : providing of operation and maintenance power house / power plant -work of complete overhauling of boilers with air pre heater, btd,coal & oil burners of 210 mw boilers (stage i: 3 boilers) of wtps

Burners Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government / Public Sector

corporations/Associations/Others

Corporations/Associations/Others

State Government