Latest bus bar connector Tenders | Government bus bar connector Tenders

Central Government/Public Sector

CTN :45610666

29 Jun, 2026 NA

Ambala - Haryana

Tender For supply of microphone having frequency response 100-10000 hz, electrical impedance 600 ohm, sensitivity=2.5mv/pa audio connector type 3 pin xlr,and cable lead with mike should be shielded and of length min 2 meter , built-in on/off switch warranty 1 year min. [ warranty period: 30 months after thedate of delivery ] ]

Central Government And Public Sector

CTN :45607729

20 Jun, 2026 NA

Hyderabad-T - Telangana

Tender For quotation for ,ge avance cs2 workstation accessories ,ecg extension cables ,ecg lead wires ,oxygen sensor ,nibp hose pipes ,nibp large cuffs ,nibp medium cuffs ,nibp small cuffs ,dual temperature cables ,dual temperature connector ,nasal temperature probes ,skin temperature probes ,spo2 extension cable ,spo2 adult probes ,spo2 pediatric probes ,etco2 gas sampling line ,d-fends ,flow sensors ,sponges for canister ,sodaline canister ,ge aysis workstation accessories ,flow sensor ,oxygen sensors

Central Government And Public Sector

CTN :45587971

01 Jul, 2026 49.25 Lacs

Multi City - Karnataka

Tender For tender for supply of post graduate equipments/instruments to physiology & ent dept at gims, kalaburagi. - mckenty-castelnuovo sphenoid punch, eicken-castelnuovo antrum cannula, v. eicken-castelnuovo antrum cannula, castelnuovo, blakesley-castelnuovo nasal forceps, end of sheath 25â° upturned, jaws 45â° upturned, blakesley-castelnuovo nasal forceps, end of sheath 25â° upturned, blakesley-castelnuovo nasal forceps jaws 45â° , castelnuovo nasal cutting forceps, miniature nasal forceps, with extra fine flat jaws, through-cutting, sheath curved 30â°, jaws upturned 45â°, miniature nasal forceps, with extra fine flat jaws, through-cutting, sheath curved 30â°, straight jaws, width of cut 1.5 mm, with cleaning connector, working length 13 cm, miniature nasal forceps jaws upturned 45â°, miniature nasal forceps, fisch raspatory, halstead mosquito artery forceps, artery forcepss, ryder needle holder, needle holders, fisch scissors, metzenbaum scissors, suctions tubess, fisch suction handle, fisch suction and irrigation tube, cylindrical, suction tube outer diameter 1.9 mm, irrigation tube outer diameter 1.9 mm, working length 9. cm, fisch suction and irrigation tube, cylindrical, suction tube outer diameter 2.5 mm, irrigation tube outer diameter 2 mm, working length 9.5 m, fisch suction tube, wullstein forceps, freer raspatory, hook, fisch micro raspatory, double curved to left, length 16 cm, fisch micro raspatory, double curved to right, length 16 cm, fisch micro raspatory, single curved to right, length 16 cm, fisch micro raspatory, single curved to left, length 16 cm, fisch tenotome, pick, hartmann ear forceps, fisch ear forceps, nasal scissors, draf micro needle holder, hegar needle holder, suction tube, kerrison punch, kerrison bone punchs, kerrison bone punch, biopsy and grasping forceps, rhinoforce ii nasal scissors, antrum curette, freer elevators, sickle knifes, septum cannula, stammberger bipolar suction forceps, bipolar high frequency cord, bipolar coagulating forceps, hartmann, microscopes, oil immersion monocular, ncs,ep,emg machine 4 channel, multi channel digital polygraph system

Central Government/Public Sector

CTN :45604052

08 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of "flexible connector hose with stainless steel mesh protection to rcf drawing no. le63140, alt. a.". [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8lacs ] ]

State Government

CTN :45592555

23 Jun, 2026 NA

Raigad - Maharashtra

Tender For provide plumbing material at grampanchayat majgaon tal khalapur dist raigad - g.i pipe 0.5 inch c grade, g.i pipe 1 inch c grade, g.i pipe 1.5 inch c grade, g.i pipe 2 inch c grade, g.i pipe 2.5 inch c grade, g.i pipe 3 inch c grade, g.i pipe 4 inch c grade, g.i pipe 6 inch c grade, g.i union 0.5 inch, g.i union 1 inch, g.i union 1.5 inch, g.i union 2 inch, g.i union 2.5 inch, g.i union 3 inch, g.i union 4 inch, g.i reducer 1x1/2 to 3/4, g.i reducer 1/2x1.5 to 1 inch, g.i reducer 2x1/2 to 1.5 inch, g.i reducer 2.5x1/2 to 2 inch, g.i reducer 3x1/2 to 2.5 inch, g.i reducer 4x1 to 3 inch, g.i tee 0.5x0.5 inch, gi tee 1 inch, gi tee 1 1/2 inch, gi tee 2 inch, gi tee 2 1/2, gi tee 3 inch, g.i tee 1x1/2 to 3/4, g.i tee 1/2x1.5 to 1 inch, g.i tee 2x1/2 to 1.5 inch, g.i tee 2.5x1/2 to 2 inch, g.i tee 3x1/2 to 2.5 inch, g.i. tee 4x1 to 3 inch, g.i coupling 0.5 inch, g.i coupling 1 inch, g.i coupling 1.5 inch, g.i coupling 2 inch, g.i coupling 2.5 inch, g.i coupling 3 inch, g.i. coupling 4 inch, g.i barer pcs 0.5x2 to 12 inch, g.i barer pcs 1x2 to 12 inch, g.i barer pcs 1.5x2 to 12 inch, g.i barer pcs 2x2 to 12 inch, g.i barer pcs 2.5x2 to 12 inch, g.i barer pcs 3x2 to 12 inch, g.i. barer pcs 4x2 to 12 inch, g.i double nipple 0.5 inch, g.i double nipple 1inch, g.i double nipple 1.5 inch, g.i double nipple 2 inch, g.i double nipple 2.5 inch, g.i double nipple 3 inch, g.i. double nipple 4 inch, g.i elbow 0.5 inch, g.i elbow 1 inch, g.i elbow 1.5 inch, g.i elbow 2 inch, g.i elbow 2.5 inch, g.i elbow 3 inch, g.i. elbow 4 inch, bib cock, still hangle cock, stop cock, basin connector pipe, shower connector pipe, basin bib cock, still cock 0.5 inch, tank connection, m seal packet, nut bold for flangs, air valve 1 inch, screw driver (taparia co.), screw pana (taparia co.), pakkad (taparia co.), flanges with thread 1 inch, flanges with thread 1.5 inch, flanges with thread 2 inch, flanges with thread 2.5 inch, flanges with thread 3 inch, flanges with thread 4 inch, ms flangs without thread 1 inch, msflangs without thread 1.5 inch, msflangs without thread 2 inch, msflangs without thread 2.5 inch, msflangs without thread 3 inch, msflangs without thread 4 inch, msflangs without thread 6 inch, g.i reducer elbow 0.75x1/2 inch, g.i reducer elbow 1x1/2 to 0.75 inch, g.i reducer elbow 1.5x1/2 to 1 inch, g.i reducer elbow 2x1/2 to 1.5 inch, g.i reducer elbow 2.5x1 to 2 inch, g.i reducer elbow 3x1 to 2.5 inch, g.i reducer elbow 4x1 to 3 inch, upvc reducer elbow 0.75x1/2 inch, upvc reducer elbow 1x1/2 to 0.75 inch, upvc reducer elbow 1.5x1/2 to 1 inch, upvc reducer elbow 2x1/2 to 1.5 inch, upvc reducer elbow 2.5x1 to 2 inch, upvc reducer elbow 3x1 to 2.5 inch, upvc reducer elbow 4x1 to 3 inch, bun plug 0.5 inch to 1 inch, bun plug 1inch to 3 inch, pvc pipe 0.5 inch, pvc pipe 0.75 inch, pvc pipe 1 inch, pvc pipe 1.5 inch, pvc pipe 2 inch, pvc pipe 2.5 inch, pvc pipe 3 inch, pvc pipe 4 inch, pvc pipe 8 inch, pvc pipe 12 inch, upvc pipe 0.5 inch, upvc pipe 0.75 inch, upvc pipe 1 inch, upvc pipe 1.5 inch, upvc pipe 2 inch, upvc pipe 2.5 inch, upvc pipe 3 inch, upvc elbow 0.5 inch, upvc elbow 0.75 inch, upvc elbow1 inch, upvc elbow 1.5 inch, upvc elbow 2 inch, upvc elbow 2.5 inch, upvc elbow 3 inch, hdp pipe 0.5 inch, hdp pipe 1 inch, hdp pipe 1.5 inch, hdp pipe 2 inch, hdp pipe 3 inch, holdtide 100 gm, holdtide 200 gm, holdtide 500 gm, holdtide 1000 gm, gate valve 0.5 inch bras, gate valve 0.75 inch bras, gate valve 1 inch bras, gate valve 1.5 inch bras, gate valve 2 inch bras, gate valve 2.5 inch bras, gate valve 3 inch bras, gate valve 4 inch bras, gate valve 6 inch bras, flanges gate wheel valve 2 inch, flanges gate wheel valve 2.5 inch, flanges gate wheel valve 3 inch, flanges gate wheel valve 4 inch, flanges gate wheel valve 6 inch, gi long bend 0.5 to 1inch, gi long bend 1to 2 inch, gi long bend 3 inch, gi long bend 4 inch, gi long bend 6 inch, water meter 3 inch, water meter 4 inch, pipe range pana 12 no. taparia, pipe range pana 14 no. taparia, pipe ran

Central Government/Public Sector

CTN :45604108

09 Jul, 2026 NA

Mumbai - Maharashtra

Tender For digital speedometer and pulse generator set of 110v dc wall mounted with measuring rangeof 0.0 to 199.9km/hr along with test and calibration certificate. one set consist digital speedometer 1 no., pulse generator (pg) 01 no., connector cable 1.5mtr, 4 core 0.5 sq mm wire 12 mtr, junction box with connector 1 no, user manual.1 no. make /brand : sonata, b-mac, medha servo drives, laxven,autometer. material to be procured from oem or authorized dealers only. (one sample may be shown to consignee for confirmation of fitment before supply.) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45604809

27 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply and end termination of over load current protection system along with full end termination suitable for overload and short circuit protection along with miniature circuit breaker distribution board with eight way mcb capacity 415 with busbar rating 200a v, c type rated sc capacity 10ka confirming tois: 13032:1991 latest with housing powder coating siemens grey-7035 with bimetallic terminal connector suitable for 16 dia aluminium tubular busbar for 32a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 16 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed todesignation a6 of is: 617-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 16. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45609872

13 Jul, 2026 NA

Mumbai - Maharashtra

Tender For provision of harting type connector in rmpu of lhb ac coaches of mumbai division under bulk rsp 2025-26

State Government

CTN :45176119

08 Jul, 2026 NA

Delhi - Delhi

Tender For corrigendum : supply of sliding unit eea-5 , szs lock external lock left set , szs lock external lock right set , latching unit type-1 , latching unit type-2 , ekt board group , locking unit , cable psu 74 subrack , cable psu 74 fan unit , diagnostic computer , npr connector

Central Government/Public Sector

CTN :45610243

06 Jul, 2026 NA

Mughalsarai - Uttar Pradesh

Tender For supply of master controller with 06 main components (a) angle transmitters (b) connector 13 pins (c) sub-d connectors (d) reverser-switch (e) cam switches (f) spring as per clw spec. no.-clw/es/3/0031 alt- j with latest alteration specn./ drg no - clw spec. no.- clw/es/3/0031 alt-j with latest alteration. [ warranty period: 30 months after the date of delivery ] ]

Bus Bar Connector Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors