Latest bus spares Tenders | Government bus spares Tenders

Central Government/Public Sector

CTN :40918374

04 Aug, 2025 NA

Multi City - Multi State

Tender For manufacture & supply of 1 in 8.5 weldable cms crossing for bg 60e1 rail section and r260 grade on psc sleepers to rdso drg. no.t-6441 with alt.4 (or latest alt. if any) & conforming to irs specification for wcms crossings serial no. irs: t-29 (revised-2023) and irs t-12 2009 for flat bottom rails and str- tdg-0021 (version-2) or latest if any, including nylon cord reinforced grsp with confirming to irs specification t-55-2023 or latest if any an d supply of all components / fittings listed as per annexure-i and excluding standard fish plate, fish bolts & nuts, elastic rail clips, insulating liner, and chec k rails etc. ( the alt. in drawings & specification issued by rdso as on tender opening date shall be applicable in this tender ) [ warranty period: 30 mon ths after the date of delivery ]

Central Government/Public Sector

CTN :40931996

07 Aug, 2025 NA

Multi City - Multi State

Tender For manufacture and supply of high viscous nylon (hvn) -66 insulating lines for wider sleep er to rdso drg no. t-6938 alt-2 (gauge side liner) and t-6939 alt-2 (non gauge side liner) (or latest a lt. if any) for use with psc sleeper to rdso drg. no. rt-8527 & rt-7008 suitable to 60 kg (uic)/ 60e1/ 136re rails, as per confirming to irs specification s.no.t-44-2023 (second revision) or latest. (one se t of liner consists of one number hvn liner to rdso drg. no. t- 6938 and one number hvn liner to r dso drg. no. t-6939) (the alteration in drawings and specifications issued by rdso up to seven days before the tender closing date shall be applicable to this tender.) [ warranty period: 30 months after the date of delivery ]

CTN :40911105

10 Jul, 2025 NA

Rewari - Haryana

Tender For requirement of material at rewari store - hacksaw blade d/e (make surya), graphite packing 8mm (make charminar/champion), graphite packing 12mm (make charminar/champion), coupling rubbber bush with nut, bolt & washer synthetic for 5/10cs pump (as per sample), pvc tape roll (make steelgrip), enamel paint black (make asian/ berger), safety helmet with side slot for attachment (blue) (make-karam), safety helmet with side slot for attachment (white) (make-karam), rechargeable torch everyday brigadier dl 31 3w led torch make: everyday, industrial safety polyester liner with nitrile coating white gloves, hs-32 (make karam), rubber sheet 1/8 (make vardhman), hex. nut & bolt (7/8 x 4 ) full thread is-1363 p1, p3-2002, hex. nut & bolt (6/8 x 4 ) full thread is-1363 p1, p3-2002, hex. nut & bolt (5/8 x 4 ) full thread is-1363 p1, p3-2002, hex. nut & bolt (4/8 x 4 ) full thread is-1363 p1, p3-2002, hex. nut & bolt (3/8 x 4 ) full thread is-1363 p1, p3-2002, nhd series 4 pole ac control contactor, size-1, 40a, cat.-n1n (bch make), plastic arm chair (modular chair model no.9402) make italica, bajaj farrata tez grey pedestal fan 250359 (make-bajaj), waste dhoti 1x1mtr length (as per sample), electrical insulating rubber mat of thickness 2.5mm and width 01 mtr. for 3.3kv grade confirming to is- 15652 ( with test certificate) (vardhman make), rotary handle (withcomplete liver assy. )bch make 225/250 hp starter (as per sample), flexible copper welding cable 25mm2 single core (make polycab), safety welding helmet, flip-up front window withheadband & anti sweat comfort pad (make karam), portable welding set model mma 300i, vrd(v) -24v, 1-phase,protection ip:23s, air cooling ,insulation :h (make shakti technology), coupling rubbber bush with nut, bolt & washer synthetic for 50cs pump (as per sample), cotton hand gloves white, pvc copper wire 1.5mm make (polycab/rr) (100mtr roll), pvc copper wire 2.5mm make (polycab/rr)(100mtr roll), nylon sling 5 ton of 5 meter length (make garware), nylon sling 3 ton of 3 meter length (make garware), the above rates are inclusive of all kind of taxes including gst and other expences like f.o.r. destination and inclusive of all incidental charges, enroute & at destination. nothing extra shall be paid separately.terms & conditions as mentioned in bid document in price schedule.

Central Government/Public Sector

CTN :40874096

28 Jul, 2025 NA

Multi City - Multi State

Tender For manufacturing and supply of high viscous nylon-66 insulating liner (hvn liner) to drg. no. r dso/t-8751 alteration-3 with latest alteration for use with wider psc sleeper to drg. no. rt 8746 and confo rming to irs specification t-44-2023 (second revision) with latest alteration amended up to one month pri or to date of tender closing. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :40873554

21 Jul, 2025 NA

Waltair - Andhra Pradesh

Tender For supply of gfn-66 liner for use with psc sleeper to drawing no. rt-8527 suitable to 60 kg (ui c) rail to rdso drg. no. t-6938 & t-6939 (as amended up to date) as per irs specification for glass filled nylon-66 insulating liner serial no. t-44-2023 (as amended up to date). one set of liner consists of one no. gfn liner to rdso drg. no. t-6938 and one no. gfn liner to rdso drg. no. t-6939. [ warranty period: 3 0 months after the date of delivery ]

Central Government / Public Sector

CTN :40873670

07 Jul, 2025 NA

Waltair - Andhra Pradesh

Tender For manufacture and supply of high viscous nylon (hvn) -66 insulating lines for wider sleeper to rdso drg no. t-6938 alt-2 (gauge side liner) and t-6939 alt-2 (non gauge side liner) (or latest alt. if any) f or use with psc sleeper to rdso drg. no. rt-8527 & rt-7008 suitable to 60 kg (uic)/ 60e1/ 136re rails, as per confirming to irs specification s.no.t-44- 2023 (second revision) or latest. (one set of liner consists o f one number hvn liner to rdso drg. no. t-6938 and one number hvn liner to rdso drg. no. t-6939). [ warranty period: 30 months after the date of delivery ]

CTN :40832041

14 Jul, 2025 NA

Nicobar Island - Andaman And Nicobar Islands

Tender For supply of spare parts for tata buses - spares, gear lever kit, front center bolt with nut, drag link repair kit, rear center bolt with nut, clutch push rod with ball pin, nozzle washer, hex nut (41 size), overflow washer (10 mm), front diaphragm (m848650), rear diaphragm (m848651), banjo bolt 10 mm, center bearing (6010), banjo washer 17mm, banjo washer 19mm, spring washer 17mm, spring washer 19mm, spring washer 22mm, assy pipe (gear boz to res tank) (282146800117), temperature transducer (263254209903), drag link repair kit

CTN :40821460

08 Jul, 2025 NA

Multi City - Rajasthan

Tender For requirement of safety, rescue and security items for ssctps fy 2025-26, suratgarh - head up light with alkaline batteries with adjustable cloth stripper for head and rubber strap, gum boots with steel toe cap moulded pvc to protect against oil acid and alkalie resistance confirming to is 15298 part - ii (size-8/9/10 inch), barrication tape (6 inch) 250 mtr roll made out of pe/pp film with work in progress printed on both sides as per ansi z53 5.5, chemical goggles with indirect ventilation made of pvc frame and fitted with polycarbonate lengths and non allergic elestic band confirming to en 160, acid/ alkali proof gloves having size of 18 inch with palm m, normal dangari (size-l) with having an is-11612 are made of various fabrics like treated cotton, fire proof dangari (size-l) having is-11612 are made of inherent fire retardent fabrics, safety helmet made up of thermoplastic polymer with inside eight point textle/nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- white, safety helmet made up of thermoplastic polymer with inside eight point textle/ nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- green, impregnated granular activated carbon multi gas filter cartridge having is- 15323 :2003, foot operated eye and face washer combination units are made of powder coated anti corossive gi pipes as per is 10592, carry sheet ( stretcher)l x b: 212 x 75 cm with self weight 1 kg , load limit 159 kg , lift type: horizontal, wind indicator made of light weight pu coated nylon material. double stitch at all joints. plastic eyelets gives anticorrosion proper ties. the complete wind sock comes with a polymer packing. 2 dia and 6 ft length along with wind indicator stand is made of good quality non corrosive galvanized iron (gi) pipe., ear plugs corded epsav-570, nose/ dust mask rpsav -p2, flash light distance 243 mtr. run time:2 hr. 15 min. compliance: none, lumens. 164, vapour respirator with head stripes to accommodate twin cartridges with exhalation valve, safety net consisting of pp rope dia: 4mm, mesh size: 100 mm,outer rope dia: 12mm supported by an additional nylon net (fish net), rope breaking strenght report should be as per is size 5mtr x 10 mtr, ear muffs, ce marked, made from impact proof polypropylene with multi position soft polymer head band. foldable compact size for storage. approved from en 352-2, snr 27 db(a), heat shield hand gloves made of normal and tannedsplit leather of reddish brown colour. insulating thermalbarrier as inner layer gives heat protection upto 250 degrees.thumb re inforcement enhances usage life. best for weldingtand general heat applications size 10 length 12.5", approved from en407-423x4x, en388-4344, insulated hand gloves with working voltage of 17000 volts and proof voltage 25000 volts length of 14 inch, confirm to erda 4770:1991, electrical hand gloves, for 2000 volts dc, coating material natural rubber latex, liner material non flocked, cuff style rolled beaded/gauntlet, grip design smeeth finish, confirm to erda 4770:1991, hot oil splash suit, a five layer garment made of csm material, meta aramid, inherent cotton, aramid felt & inherent fr. the fabric withstanding pressure caacity is 50kg/cm2 and steam strength is up to 350 c temperature.it should be atira tested for 250 c splash, tested to iso 5025,9151,6942,9185 and en 1875-3, chemical splash goggles with indirect ventilation, protect against splash and a hard coated polycarbonate lens that reduces uvb and uva radiation from natural sunlight by 99%, approved from ansi z.87.1.2003, chemical handling gloves, protect from acid alkali, sulfuric acid, size 18" as per en 374:2003, elecrical shock proof helmet, material should be hdpe, weight should not be more than 325 gms design should be aerodynamic size is 520 to 600 mm, confirm to is 2925:1984 for head protection 30 kv, chemiflex latex gloves, length-300 mm, en size- l coating material- natur

CTN :40780975

10 Jul, 2025 NA

Multi City - Multi State

Tender For supply of high viscous nylon-66 insulating liner (t-6938). [ warranty period: 30 months after the dat e of delivery ]

CTN :40808350

04 Jul, 2025 13.22 Lacs

Ganganagar - Rajasthan

Tender For requirement of safety, rescue & security items for ssctps fy 2025-26,suratgarh - head up light with alkaline batteries with adjustable cloth stripper for head and rubber strap , gum boots with steel toe cap moulded pvc to protect against oil acid and alkalie resistance confirming to is 15298 part - ii (size-8/9/10 inch) , barrication tape (6 inch) 250 mtr roll made out of pe/pp film with work in progress printed on both sides as per ansi z53 5.5 , chemical goggles with indirect ventilation made of pvc frame and fitted with polycarbonate lengths and non allergic elestic band confirming to en 160 , acid/ alkali proof gloves having size of 18 inch with palm m , normal dangari (size-l) with having an is-11612 are made of various fabrics like treated cotton , fire proof dangari (size-l) having is-11612 are made of inherent fire retardent fabrics , safety helmet made up of thermoplastic polymer with inside eight point textle/nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- white , safety helmet made up of thermoplastic polymer with inside eight point textle/ nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- green , impregnated granular activated carbon multi gas filter cartridge having is- 15323 :2003 , foot operated eye and face washer combination units are made of powder coated anti corossive gi pipes as per is 10592 , carry sheet (stretcher) l x b: 212 x 75 cm with self weight 1 kg, load limit 159 kg, lift type: horizontal , wind indicator made of light weight pu coated nylon material. double stitch at all joints. , plastic eyelets gives anticorrosion proper-ties. the complete wind sock comes with a polymer packing. 2" dia and 6 ft length along with wind indicator stand is made of good quality non corrosive galvanized iron (gi) pipe. , ear plugs corded epsav-570 , nose/ dust mask rpsav-p2 , flash light distance 243 mtr. run time:2 hr. 15 min. compliance: none, lumens. 164 , vapour respirator with head stripes to accommodate twin cartridges with exhalation valve , safety net consisting of pp rope dia: 4mm, mesh size: 100 mm, outer rope dia: 12mm supported by an additional nylon net (fish net), rope breaking strenght report should be as per is size 5mtr x 10 mtr , ear muffs, ce marked, made from impact proof polypropylene with multi position soft polymer head band. foldable compact size for storage. approved from en 352-2, snr 27 db(a) , heat shield hand gloves made of normal and tannedsplit leather of reddish-brown colour. , insulating thermalbarrier as inner layer gives heat protection upto 250 degrees. thumb re-inforcement enhances usage life. best for weldingtand general heat applications size 10 length 12.5", approved from en407-423x4x, en388-4344 , insulated hand gloves with working voltage of 17000 volts and proof voltage 25000 volts length of 14 inch, confirm to erda 4770:1991 , electrical hand gloves, for 2000 volts dc, coating material natural rubber latex, liner material non flocked, cuff style rolled beaded/gauntlet, grip design smeeth finish, confirm to erda 4770:1991 , hot oil splash suit, a five layer garment made of csm material, meta aramid, inherent cotton, aramid felt & inherent fr. the fabric withstanding pressure caacity is 50kg/cm2 and steam strength is up to 350c temperature.it should be atira tested for 250c splash, tested to iso 5025,9151,6942,9185 and en 1875-3 , chemical splash goggles with indirect ventilation, protect against splash and a hard-coated polycarbonate lens that reduces uvb and uva radiation from natural sunlight by 99%, approved from ansi z.87.1.2003 , chemical handling gloves, protect from acid alkali, sulfuric acid, size 18" as per en 374:2003 , elecrical shock proof helmet, material should be hdpe, weight should not be more than 325 gms design should be aerodynamic size is 520 to 600 mm, confirm to is 2925:1984 for head protection 30 kv , chemiflex latex gloves, length-300 mm, en si

Bus Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government / Public Sector