Latest bush bar Tenders | Government bush bar Tenders

Central Government/Public Sector

CTN :45702701

01 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For auction sale of rolling stock - condemned and unserviceable bg demu coach no. special repair dpc 008073 with available items [refer enclosure for the material composition]. location: coach care centre tpj/diesel loco shed goc. custodian: sse/demu/diesel shed/goc. re-claimable items - [1] wheel sets with bull gear-04 sets [2] 8v 450ah lead acid battery-03 nos [3] 6v batteries-18 nos [4] truck assembly-02 sets [5] axle box with bearings-08 nos [6] buffer complete-02 nos [7] schaku coupler assembly[draw bar with hook, draft gear assembly]-01 set [8] brake cylinders-04 nos [9] wear pieces(brass)-04 nos [10] dpc main doors-02 nos. advice note no.073817-25-08698, dt: 11.12.25. note-[1] delivery to be made on as is where is and lot basis.[2]the location indicated is only tentative. railway reserves the right to change the location of sold coach, based on the availability of track, cutting and loading space and other administrative reason, as deemed fit by the auction conducting officer.[3]gas/chisel cutting is permitted only to sizes that are loadable with a crane, only after ensuring sufficient safety measures against fire hazards etc. to avoid any mishap to any person, railway material etc. and the same should be ensured by the witnessing officials.[4]in case purchasers require usage of any railway assets/materials such as electricity/forklift truck etc. during the process of delivery, they are required to pay the prescribed amount to railways, as directed by the respective custodian of the lot. special condition- [1] reclaimable item as said above in description of the lot, should be returned to the custodian before commencing delivery. [2] in order to make the assessment, the purchaser may visit the coach offered for condemnation and the site conditions before quoting the offer.[3] the purchaser has to make his own arrangements such as tools, lifting tackles, lifting equipment, gas cutting equipment. [4] the weight and quantities were taken into consideration as advised by the custodian [5] the purchaser may note that reclaimable items of coach are to be stripped instead of gas cutting to avoid damage to rc items and the purchaser should make such arrangements, especially traction motors should be removed by using proper tools and equipments without causing damage to truck assembly [6] the purchaser is strictly instructed to transport/stack all the reclaimable items at one location well away from the cut off parts of the coach as directed by the custodian. [7] the purchaser will be held responsible for any damage/fire accident caused to the railway property. [8] railway is not responsible for any shortage.[9] after completion of delivery, purchaser has to keep the cutting and loading spot neat and clean, free of any left over coach scrap. [10] railways does not guarantee for quality, quantity description etc.[11] delivery should commence immediately after cutting without any delay. [12] the courts in chennai alone shall have exclusive jurisdiction in the matters/disputes arising out of the contract/arbitration/conciliation proceedings and the place of arbitration/conciliation, if any, shall be in chennai only. [13] bsv partly paid along with emd will be forfeited, if full payment is not received in stipulated time, with interest if any applicable. [14] part delivery is not permitted against part payment. [15] if any hsd oil/lube oil available in fuel tank/oil sump of the said coach, the same may be returned to the custodian.(location: coach care centre tpj / diesel loco shed goc)

Central Government/Public Sector

CTN :45702761

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector,tapperbearing with polimer cage,doubelcupcollar,shockabsorber,hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger,iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel),castiron components, impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: bin n

CTN :45639996

01 Jul, 2026 NA

Kupwara - Jammu And Kashmir

Tender For supply of hand grinder , bush bar 100 amp , stanley high quality tool kit , cutting plier taparia , nose plier

Co-operative

CTN :45474707

23 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For c.i. item on conversion/supply basis - c.i.pipe with standard thickness & flange as per i.s.i. specification machined from dia 4" to 12"(i) new material supply basis, (ii) on conversion basis, c.i. bend, duck foot bend, cross,tee and other such part all size as per drg.(i) new material supply basis, (ii) on conversion basis, c.i.drum, rod,bush, bari,idler pully, break drum for cane unloader etc as per drg.(i) new material supply basis, (ii) on conversion basis, c.i.coupling from 4"dia to 10"dia plane/flange type(i) new material supply basis, (ii) on conversion basis, c.i. firing frame,door side chamber, bagasse rotary chuts, rotary feeder drum , clit, hanger, beam, gutka, furnace nozzle, clam etc. and other such parts for lipi/taxmaco boiler as per different drg.high chrome grade 25 , casting & machined temp. capacity 15000 c(i) new material supply basis, (ii) on conversion basis, c.i. clamp/ hanger clit small size for lippi boiler no. 3 as per drg. blr-79 high chrome grade 25 , casting & machined temp. capacity 15000 c, c.i scapper mixed with pig iron and having standard hardness dully machined as per drg.no.mh-66 ( r)(i) new material supply basis, (ii) on conversion basis, (iii) grooving of c.i.scrapper as per drg., centrifused casted c.i.coupling for fmg gear of kcp mill od 1000 mm.pcd 815(18 holes)9+9,with machining complete as per drg.no.mh-93, c.i.motor cover for different type motor, mill setting bolt & nut for kcp mill drg.no.mh-106, mill setting bolt & nut for taxmaco mill drg.no.mh-38, c.i.worm and worm wheel for crystilizer as per drg.bh-39 ( r ) machined, c.i.worm and worm wheel for vertical crystilizer no. 2 complete set as per drg. machined, eccentric shaft and eccentric for hopper as per drg.no.bh-60, m.s.shell for under feed roller as per drg.mh-95.length 1525 mm.od 750mm,thickness 18mm, c.i. muff coupling for cane unloader as per drg.no cu-25, c.i.gear for magma mixture as per drg.no bh-137.od 450mm,no.of teeth-51.bore 70mm, width 63mm, c.i.brake drum for s.d.centrifugal machine taxmaco make duly machined(i) as per drg.no. bh 81/1, (ii) as per drg.no bh-81/2, c.i.v-belt pully of cont.centrifugal machine duly machined, c.i.scale seat for juice weighing scale duly machined and drilled as per drg.no.mh-195, id fan pully (as per drawing no. bl-r-128/2024-25), id fan motor pully (as per drawing no. bl-r-129/2024-25), boiler grate bar material-cont iron. (as per sample/drg.), boiler furnace manage gap bar. (ap per sample/drg.), chief engineer

CTN :44287024

05 Jun, 2026 NA

Uttara Kannada - Karnataka

Tender For corrigendum : tender for supply of procurement of main engine spares c c -high temp cement(brimor cement u 529) , o ring , an21 , 60c7 , nse 6.5 , bush (bar) , plug , camshaft stud , locking plate abb no.7026 , metafram bush bp25 16 20x20 , spool valve air operated 1 pilots (location 16 18) , joint helicoclex , valve exhaust , piston o ring , zinc rod , washer plain , slotted c sunk head screw m6x , circlip external , circlip external , circlip 85 x 3 , banjo bolt m12x1.5 , washer , washer plain , washer copper , washer copper 16x22 , copper washer (18x24) , washer copper , conical spring washer (m14) , ball , hose flex at air inlet , ball bearing skf 6209 , o ring , joint , expansion bellow , joint punched , joint , mb 25x20 du bush , mb 25x30 du bush , ring ba 25x35x7 72 nbr902 simrit , joint , o ring (viton) an65 , 60 c7 , joint , dia 184x240xep.2 , bearing roller , o ring bush , joint , fuel feed pump assly cw tgos , sleeve spring , mechanical seal stat.sealing ring , o ring , elastic mountings tsc t140 70 d , injector adj screw , gasket , gasket , flex hose , flex hose dn 13 l 1 m , flex hose dn 6 l 1 m , sleeve dn32 , pn16 , ball bearing for lub oil filter , set of diversion element for fms01 lo , barrel plunger assembly 23 dia grad , toothed quarnt , plunger spring , shim injection , fuel rack sensor , exp. bellow , stud m12 50 30 j 12 12.9 clas , o ring an73 , joint for balmo fuel feed pump , sealing cord , o ring 5x589 viton (20312) , o ring 05x260 , spring pack , locking plate , hex headed screw , locking plate , hex headed screw , locking plate , cyclam seal assy , screw hm8 16. st. steel , link , shim bronze , gasket , addesive super cyano 495 , silastic black rtv 732 5368 , bearing shell , bush , loctite 242 , group small end bearing , hylomar paste sq 32 , rod push , seat inlet valve , copper washer , exhaust valve seat , snep nut m16 , outside spring , screw with expanded tappet , tappet , gasket , copper washer 8x22x1.5 , b.s.ring c20 , 60c7 , connection (bar) , pin for rack (bar) , barrel cap , valve feed , spring , coupling - holder , positioning pin , anti plash piece , adjusting screw(bar) , o ring d 1.8 , di 37.4 , nse6.531 , 21a7 , o ring , hex socket countersunk (flat ) head cap screw m6x16 din7991 , stop ring , coupling ring , dumb bushes 25 25 du , ball joint sfg 12 uniball , ball bearing 6308 , inlet manifold seal , clamp , oval joint , banjo bolt , bs ring bsb d12 nse6.51 20a8 , o ring no18 nse6.5 60c7 , o ring an24 , nse6.5 , 60c7 , o ring , an 21 , 60c7 , nse 6.5 , o ring 151i.d.3d nse6.531 , 21a7 , viton oil seal(15x30x10) , oring an no 27 , nse 6.5 , 60c7 , o ring 162x8 , o ring for gf600 filt.(no.2090p) , o ring gf 600 filt(no 2091p) , o ring for glacier filter , locking plate-abb no.7067 , bush bearing , bush sealing , plate oil baffle , piston ring(p3712) , ring saftey , con rod brg (pair) , cylinder liner , piston ring , solenoid valve , oks 200 molykote 250 gm upto 450 deg c , copper washer(30x36) , washer copper , pair of bevel gears , joint pn 6 no 175 nse 6.551 class 22 , bush dia 22 26 x 14 , clogging indicator icf 30 el5 , injection pump assembly dia 23 (gradient) , duplex fuel filter , thermostat element for naval opv , seal kit , water pump (230 cu.m. hr)assly bronze , push button black , half clamping collar , sealing product glue 1005l , cover , injector gasket , bush viton , lgc surrated pin (bar) g2 6x55 , o ring , activator t (7471) , gasket for exh , o ring , mcb 6 a , regrouing safeties card (rgs) , pressure regulator (5) , actuator safeties card (acs) , bearings temp , measure card(mtp) , bearings individual alarm card (aip) , plug female 11 pin , plug male 11 pin , plug male 8 pin , plug female 8 pin , plug male 21 pin , plug female 21 pin , plug male 21 pin , plug female 21 pin , solenoid valve nc (3/4) , spool valve air operated 2 pilots (13) , spool valve air operator 2 pilots (15 10) , spool valve air operated 1 pilots (12) , logic unit tempo(timer) , (14) , logic unit re

Central Government And Public Sector

CTN :45289225

04 Jun, 2026 NA

Multi City - Chhattisgarh

Tender For auction sale of pway scrap - total qty. = 77.646 mt, description: - lot no.-sse/pw/c/bsp/01; pull out pieces 60 kgs.(10.01 mt) & lot no.-sse/pw/c/bsp/0; sej 52 kg w/o fitting s/r,t/r(2.024 mt) stacked in front of dsd, lot no.-sse/pw/c/bsp/03; sej fitting only 60 kg(2.794 mt), lot no.-sse/pw/c/bsp/04; sej c.i chair(2.018 mt), lot no.-sse/pw/c/bsp/05; ins. guage tie plate(0.86 mt), lot no.-sse/pw/c/bsp/06; stretcher bar of shorts(3.234 mt), lot no.-sse/pw/c/bsp/07; ms plate tie bar(4.131 mt), lot no.-sse/pw/c/bsp/08; spl. bearing plate of shorts(11.103 mt), lot no.-sse/pw/c/bsp/09; slide chair of shorts(29.708 mt), lot no.-sse/pw/c/bsp/10; sej fitting only 52 kg(5.587 mt), lot no.-sse/pw/c/bsp/11; jn. fish plate 90r/52 kg(6.178 mt) stacked at sse/pw/con/bsp store. remarks:- 1) material to be sold on "as is where is basis" and will be delivered in weight only. 2) materials can be moved by road within a lead of 10 meters from stacking point. 3) tractor/trollies is needed during delivery of the sold materials. 4) the lot has been offered manually and can be lifted in fair season only.

Central Government And Public Sector

CTN :45302373

04 Jun, 2026 NA

Multi City - Chhattisgarh

Tender For auction sale of others - total qty.= 16.34 mt, description: - mixed scrap (channel offi sizes, various type of angle, r/g.i pipe. r/tie bar pannel, off sizes rusted door, r/grill offsizes, r/g.i. sheet cut pieces, ms. chairs, cow kecher, r/g.i. gutter, r.s. joist and etc.). remarks - 1) material can be moved by road with a lead of 30 meters from the stacking point. 2) material to be sold on as is where is basis and will be delivered in weight.

Central Government And Public Sector

CTN :45134676

20 May, 2026 NA

Multi City - Chhattisgarh

Tender For auction sale of pway scrap - total qty. = 43.706 mt, description: - lot no.-je/pw/c/rig/18; u/s 52 kg joggle fish plate(2.613 mt), u/s 52 kg fish plate(1.534 mt), u/s 52 kg fish plate 1 mtr long(0.48 mt), u/s 60 kg joggle fish plate(2.159 mt), u/s 60 kg fish plate 1 mtr long(0.72 mt), u/s erc mk-iii(13.95 mt), u/s 60 kg slide chair(5.486 mt), u/s 60 kg bearing plate(1.08 mt), u/s 60 kg stretcher bar(0.612 mt), u/s 60 kg gauge tie plate(0.68 mt), u/s block off sorts(0.448 mt), u/s 60 kg sej chair plates/brackets(4.864 mt), u/s 60 kg lc brackets(3.51 mt), u/s plate screw off sorts(0.32 mt), u/s bolt & not off sorts(5.25 mt). remarks:- 1) material to be sold on "as is where is basis" and will be delivered in weight only. 2) materials can be moved by road within a lead of 50 meters from stacking point. 3) tractor/trollies is needed during delivery of the sold materials. 4) the lot has been offered manually and can be lifted in fair season only.

Central Government/Public Sector

CTN :45110709

15 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector, motorman driver seat base with bend, hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,erclips,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger, safety strip, iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel), impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: a row bin 1 & 2

CTN :44823266

07 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of bush (bar) , assembly valve gear , rocker cover with o ring(w/o inj.cooler) , copper washer 8x22x1.5 , adjusting screw(bar) , metafram bush bp25-16/20x20 , oil seal 25x42x8 , exhaust manifold(lag) , sheathed injection pipe , stud m12-40/30n j12 nse1.181 , oring an7 , 31b6 , mb 40x30 bearing bush , o ring 151i.d.3d nse6.531 21a7 , set of gaskets for pd filter , sealing ring , pin , fuel filter element , bush bearing , sealing bush , piston ring(p3712) , ring saftey , bush , cap , locating pin , lgc pin (bar)lgc g5 8x30 , plut , cam shaft plug , roller bearing 110 60 22 , loctite 641 , con rod small end bush , piston pin , chrome plated piston ring , compression ring , cyl.liner (light fuel) assy , pin roller , roller , rocking arm assembly , snap ring , ring nse6.531 21a7no ms 229 , washer , stud , exhaust valve seat , outside spring , tappet , plug , valve rockers assly , sealing product glue 1005l , copper washer 8x22x1.5 , piston ring , needle , coupling-holder , o ring , shaft , nut , ball bearing skf6307 , ball bearing , bearing , cyclam seal , bs ring , lipped seal , expansion bellow , o ring , pump tappet lo pipe , lub oil pipe , valve air lo pipe , coupling hollow screw , gasket , joint , flame arrestor , sealing joint , washer , pinion on reducer , bs ring , type c30 , nse 6.51 , 20 , loctite , filter ing element for particle detecting filt , o ring , indicator cock assembly , adaptor , fuel feed pump ccw tg0s , set of gaskets for fuel feed pump , set of oil seals for fuel feed pump , rucompensation probe for exh. pyrometric duct , flex hose for hydraulic tool , flexible hose for breather , pressure switch , overspeed air solenoid valve (241 no 24v)

Bush Bar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Co-operative

Central Government And Public Sector

Central Government And Public Sector

Central Government And Public Sector

Central Government/Public Sector