Latest bushing clamp Tenders | Government bushing clamp Tenders

CTN :41800529

04 Nov, 2025 NA

Delhi - Delhi

Tender For procurement of spares for mirage aircraft - distribution box, video acquisition module (atase ii), operators interface, frame front assembly, gnss board, crt assembly, equipped chassis, mdpu-serpam enclosure, power supply unit, lcd and light unit, interface source and amplifer, equipped main housing, c c a, clamp-guidance, plate (fuel pressurisation system), valve,filling, hbj-hv power supply, mic pcb, mdr wired structure, key board, power supply module, inertial frame, mks board, management video module, display head module, board assembly (ak and evs), mia pcb with software, box,storage, detector,landing

corporations/Associations/Others

CTN :41126810

25 Sep, 2025 2.56 Crore

Vadodara - Gujarat

Tender For corrigendum : purchase of 22kv to 400kv bus post insulators with clamp connector & w/o structure for year 2025-26 as per specification on firm price basis against tender no. ace(p&c)/ii/e-3041-r/bpi/2025-26

Central Government/Public Sector

CTN :41759290

30 Sep, 2025 21.63 Lacs

East Singhbhum - Jharkhand

Tender For tender for supply of 33kv line maintenance between jaduguda and narwapahar for two years : : - replacement of 33kv pin insulator including supply of necessary fixing materials. this includes binding of acsr dog conductor also , replacement of 33kv disc insulator including supply of necessary fixing materials in existing 33kv line , replacement of 33kv cross arm including supply of necessary fixing materials , replacement of packing pieces in existing cross arms , replacement of pg clamp for dog conductor including supply of necessary fixing materials , installation of complete stay set including supply of necessary fixing materials. this includes digging of stay pits and grouting of stay rod in cement concrete foundation also as required , installation of gi wire 7/10 swg for stay including supply of necessary fixing materials , installation of gi wire 8 swg for guard wire , installation of gi wire 7/14 swg for earth wire including supply of necessary fixing materials , replacement of back clamp for cross arm & top bracket (50mm x 10mm flat) including supply of necessary fixing materials , installation of d.p. channel (100mm x 50mm x 6mm) 1 x 3 mtrs including supply of necessary fixing materials , installation of d.p. channel support clamps including supply of necessary fixing materials , replacement of earth clamps for earth wire including supply of necessary fixing materials , replacement of side stay clamp including supply of necessary fixing materials , replacement of angle stay clamp including supply of necessary fixing materials , replacement of cross bracing for d.p. structure including supply of necessary fixing materials , replacement of clamp for x-bracing including supply of necessary fixing materials , installation of earthing pit using pipe earth electrode as per drawing including connection to earth wires and supply of necessary materials required it , laying & tensioning of acsr dog conductor including fixing / binding at insulators in the 33kv line (per km consist 3 conductor of ryb phases). , tensioning of dog conductor and supporting & fixing on insulators including binding as required in the section (per km consist 3 conductor of ryb phases). , cutting and removal of hages , trimming of trees and branches of size more than 4inch dia and disposal of un-serviceable materials to ucil canteen building as per direction of eic , cutting and clearing jungle grass including uprooting of rank kegetation , long grass , bush wood , trees and saplings upto 4inch dia measured at a height of 1 meter above ground level as per direction of eic , erection of m.s. rail pole 105 lbs , 13 meters long including drilling of 2 nos holes of 5/8inch dia as required at one end of rail pole for fixing of f- clamps , installation of ab switch on double pole structure. this includes fixing of required channels and clamps and other fixing as required and for proper operation. this includes connection of dog conductor alsodog conductor also , installation of 33kv lighting arrestor on double pole completed with line and earth connections , maintenance of ab switch on double pole structure , 33kv line patrolling from narwapahar to jaduguda , replacement of earth spike along the 33kv line & connection to pole , number of rail pole with painting of pole upto 6 feet height for colour coding of line

corporations/Associations/Others

CTN :41516898

15 Sep, 2025 NA

Mirzapur - Uttar Pradesh

Tender For corrigendum : supply of de-centralized materials and works for increasing capacity and installation of tf under business plan 2025-26, edd-kachhawa - supply of following decentralized materials provide by contractor at the works site as per resspo norms., stone pad 300x300x75 mm, x-arms holding clamps with bolts & nuts, f-bracket with bolts & nuts, top, dropper channel clamp with bolts & nuts for st pole, top, dropper, t-off channel clamp with bolts & nuts for pcc pole, p.g clamps for weasel conductor, danger board with clamp & bolts, dead end clamp for pole/bracket with nuts & bolts, eye- hook, suspension clamp with nuts & bolts, j hook, all. binding wire 6 mm, 1x35 sq mm ac cable (xlpe), three phase distribution box, three phase distribution box clamp (ls), e-bracket with nuts & bolts, copper l-piece 50x225x10 mm, copper l-piece 62x225x12 mm, all lugs 240 mm2, all lugs 120 mm2, all lugs 70 mm2, stay clamp with nut & bolts for st pole, stay clamp with nut & bolts for pcc pole, stay insulator, cartage of following materials from esc, mirzapur provided by department to work site including loading & unloading charge., st poles 11 mtr long, pcc poles 8.5 mtr long, all line materials with acsr weasel conductor, arial bunch cable 3x50+1x35+1x16 mm2, arial bunch cable 3x95+1x70+1x16 mm2, transformer 250 kva, transformer 100 kva, transformer 63 kva, transformer 25 kva, erection, erection of single support st/pcc pole for construction of 11 kv/lt line including digging of pit, fitting of all accessories, back filling of earth & others required work as per resspo norms., grouting of pole with 1:4:8 ratio of cement sand & brick ballast as per resspo norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), grouting of stay sets including digging of pit with 1:4:8 ratio of cement sand & brick ballast as per resspo norms, fixing binding and nuzzling of stay wire. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), earthing of poles as per resspo norms, stringing & sagging of 3 phase 11 kv line upto proper sag including laying of acsr weasel conductor, binding with insulators & jumpering as per resspo norms, laying, streaching of arial bunch cable size 3x50+1x35+1x16 mm2/ 3x95+1x70+1x16 mm2 as per resspo norms, erection of sectional double pole structure of st pole for distribution t/f, including digging of pit, fitting of all accessories, earthing of pole, back filling of earth, grouting of each pole & stay sets & other required works as per resspo norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), erection of sectional double pcc pole structure for distribution t/f with the help of one pole already erected including digging of pit, fitting of all accessories, earthing of pole, back filling of earth, grouting of each pole & stay sets & other required works as per resspo norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), construction of transformer plinth for 250 kva transformer of 2x2x1.5 mtr. including the work of excavation for foundation of plinth plastering of walls and finishing including cost of all materials., well type earthing of 250 kva transformer by using b class g.i. pipe of 1.5 " dia and making hand pipe type earth boring iind strata of water or 60 ft. whichever is deeper about 6" of g.i. pipe shall remain above ground level 2 no. g.i. earth clamp shall also be welded to the portion of pipe which is above the ground level. through this g.i. clamp and g.i. strip 30x5mm duly galvanized shall be connected with nut & bolts. every dt shall have 2 such earthing, one earthing for t/f neutral and second earthing for t/f body. all requred materials shall by provided by the contractor., fencing of t/f with m.s. square mesh welded/fixed on m.s. angle of size 65x65x6 mm wi

corporations/Associations/Others

CTN :41525709

15 Sep, 2025 NA

Mirzapur - Uttar Pradesh

Tender For : details supply of de-centralized materials & works for increasing capacity & installation of t/f under business plan 2025-26 edd-chunar - supply of following decentralized materials provide by contractor at the works site as per resspo norms., stone pad 300x300x75 mm, top, dropper, t-off channel clamp with bolts & nuts for pcc pole, e-bracket with nuts & bolts, copper l-piece 50x225x10 mm, copper l-piece 62x225x12 mm, all lugs 240 mm2, all lugs 70/95/120 mm2, stay clamp with nut & bolts for pcc pole, stay insulator, cartage of following materials from esc, mirzapur provided by department to work site including loading & unloading charge., pcc poles 8.5 mtr long, line materials with acsr weasel conductor, transformer 250 kva, transformer 100 kva, transformer 63 kva, transformer 25 kva, erection, erection of sectional double pcc pole structure for distribution t/f with the help of one pole already erected including digging of pit, fitting of all accessories, earthing of pole, back filling of earth, grouting of each pole & stay sets & other required works as per resspo norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), construction of transformer plinth for 250 kva transformer of 2x2x1.5 mtr. including the work of excavation for foundation of plinth plastering of walls and finishing including cost of all materials., well type earthing of 250 kva transformer by using b class g.i. pipe of 1.5 " dia and making hand pipe type earth boring iind strata of water or 60 ft. whichever is deeper about 6" of g.i. pipe shall remain above ground level 2 no. g.i. earth clamp shall also be welded to the portion of pipe which is above the ground level. through this g.i. clamp and g.i. strip 30x5mm duly galvanized shall be connected with nut & bolts. every dt shall have 2 such earthing, one earthing for t/f neutral and second earthing for t/f body. all requred materials shall by provided by the contractor., fencing of t/f with m.s. square mesh welded/fixed on m.s. angle of size 65x65x6 mm with gate hinges & shutter assembly, of over all size 3x3x2.5 mtr as per drawing including cost of all materials., mounting of 25 kva transformer as per resspo norms, mounting of 63 kva transformer as per resspo norms, mounting of 100 kva transformer as per resspo norms, mounting of 250 kva transformer as per resspo norms, cartage of received back 10 kva transformer from work site to esc, mirzapur including loading & unloading charge, cartage of received back 16 kva transformer from work site to esc, mirzapur including loading & unloading charge, cartage of received back 25 kva transformer from work site to esc, mirzapur including loading & unloading charge, cartage of received back 63 kva transformer from work site to esc, mirzapur including loading & unloading charge, cartage of received back 100 kva transformer from work site to esc, mirzapur including loading & unloading charge

Central Government/Public Sector

CTN :41721549

27 Sep, 2025 NA

Multi City - Multi State

Tender For construction of 02 nos of deep borehole with jalminar in mohuldih and aaamdih village under csr : : - boring of size 6.5 inch diameter upto minimum 30m depth and further boring of size 5 inch diameter upto 50m depth in rock zone., providing and fixing of 5 inch diameter pvc casing pipe as per is 12818 with minimum wall thickness of 5.2 mm , supply and fitting of 32mm brass ball valve, supply and fitting of 32mm brass non-return valve horizontal, supply and fitting of 32mm m. s clamp to hold pipe, supply and fitting of g. i nipple 32mm, supply and fitting of g. i bend 32 mm, supply and fitting of bore well cover size 5 inch, supply and fitting of p.p.rope rassi of size 10mm dia, pvc tape 02 roll taplon tap 10 roll mseal 20 pkt etc all complete., supply and fitting of size 1 inch dia , supply and fitting of size 3 by 4 inch dia, supply and fitting of size half inch dia, supply and fitting of valve size 1 inch dia, supply and fitting of valve size half inch dia, "providing and laying single layer brick flat soling with over burnt or picked jhama bricks including preparing and leveling the bed and filling the joints with locally available coarse sand.", "making platform with side brick wall for fixing water point one side 900 mm height and other three side 200mm with anti skid vetrified floor tiles size 300 x 300 and ceramic wall tiles 300 x 150 mm upto a height of 900 mm over brick wall all complete as directed by eic", "providing and applying with synthetic enamel paint two or more coats with approved brand and shade ready mixed paint including primer as per direction of eic with the latest monogramme of ucil.", "providing of submersible pump set of 02 hp minimum wp 1500 and minimum 110 m water head auto run & stop with dc pump motor of stainless steel suitable for minimum 125 mm dia borewell discharge rate minimum 2000 lph at minimum 110 mtrs head and making suitable arrangements to operate hand pump manually in the same borewell when there is no solar power including 02 years warranty against defects in materials & workmanship with locking arrangements of switch board all complete as per of eic. ", "providing and fixing of 2.5 sqmm x 3 core flat submersible copper cable as per latest is 694 as directed by eic", "providing fixing and lowering of 32 mm dia upvc sch80 pipe of pressure rating of 12.50 kg per cm2 with all accesssories and fittings complete as per direction of eic", "providing and fixing ptmt push cock or bib cock of approved quality and colour 15 mm nominal bore 98 mm long weighing not less than 75 gms", "supply and installation of hot dip galvanized steel composite stagging structure of height 4.5 m and 1.5 m x 1.5 m size aprox 350 kg for mounting of 2000 l water tank to withstand wind pressure of high wind of 200 km per hr as per direction of engineer incharge.", "providing and fixing of hdpe water tank isi mark 2000 ltr capacity with cover and locking arrangement to be put on the top of the steel stagging.", "installation fittings plumbing charge civil work of jalminar with pump set complete including transportation as per direction of eic.as per direction of engineer incharge"

State Government

CTN :41619694

09 Sep, 2025 NA

Parganas - West Bengal

Tender For supply, installation and trials of laboratory instruments equipment apparatus with training for quality control ii division at siliguri, p.w.(roads) directorate - nomenclature of machine/instrument and work required: supply, of only vacuum pump cum controller required for existing digital 4 station vacuum indicator for absolute viscosity test. the same will have to he installed on the existing machine and after installation, necessary trials are to be carried out. relevant is code: is: 1206: 2022 (part ii). specification: the pump connected with the vacuum system should be capable of maintaining a vacuum within 2 0.05 cm of the desired level up to and including 30 cm of mercury, and should have the capability of holding the desired pressure throughout the period of a particular test. the pump should have both analogue (with divisions of 0.05 cm of hg) and digital pressure gauge (capability of displaying minimum of 0.05 cm of hg). the vacuum pump controller should be supplied with a 4-position manifold to apply vacuum simultaneously up to four positions and perform viscosity determinations. equipped with dedicated on/off switches for each position and supplied with blue silicon tubing. the pump should have the capability of withholding the pressure set for tests and also maintain it throughout the test. vacuum pump should be the part of vacuum system [pump should be inbuilt with in the vacuum system along with analogue and digital display of vacuum). note: 1. calibration certificate will have to be furnished and should be valid for atleast 10 months from the date of supply 2. necessary tests and trials will have to be carried out to the satisfaction of engineers of q.c.-ii division at siliguri. 3. two year comprehensive warranty of total system from the date of satisfactory completion of onsite installation, commissioning and training of the instrument., nomenclature of machine/instrument and work required: supply, installation of u-tube, modified reverse flow viscometer for opaque liquid required for kinematic test of bitumen. details: tube no. 6 & 7 with 01 no. stand each. relevant is code: is 1206 (part 3): 2021 specification: note: 1. calibration certificate will have to be furnished and should be valid for atleast 10 months from the date of supply. 2. necessary tests and trials will have to be carried out to the satisfaction of engineers of qc-ii division at siliguri. 3. two year comprehensive warranty of total system from the date of satisfactory completion of onsite installation, commissioning and training of the instrument., nomenclature of machine/instrument and work required: supply & installation of serological water bath. specification: the bath should have double walled structure, having facility of digital controller cum indicator. the bath should have stirring arrangement. inside wall should be of stainless-steel seamless ss 304 seamless, min. thickness 1.0 mm, with rounded corners for easy cleaning with proper drainage system having ptfe valve and hose pipe (15mm inner dia. min). outer wall to be of ms and properly insulated with cfc-free high-density insulation. minimum temp. range is 5°c to 95°c, 20.2°c. size should be minimum 28 l: -600 w 400d 350 h mm; for 8 standard racks, with adjustable height, compatible with common test tubes (10-50 mm dia.) and other bottles/beakers. note: 1. calibration certificate will have to be furnished and should be valid for atleast 10 months from the date of supply. 2. necessary tests and trials will have to be carried out to the satisfaction, nomenclature of machine/instrument and work required: supply & installation of burette stand with clamp specification: boss head & rod (with stainless steel corrosion resistant rod (length 18") the rod diameter is 1 cm and solid black coated support stand base (6"x4"). should be made of high-quality anti-corrosion & rust-proof stainless steel. the base should be padded to prevent scratches on the surface and better gri

State Government

CTN :41605336

16 Sep, 2025 52.09 Lacs

Giridh - Jharkhand

Tender For 157/pr/jbvnl/2025-26 supply of electrical line materials under adp head for f.y. 2025-26 under esa, giridih - electrical items :, 11 kv dp channel [75x40x6 mm] [galvanized] [41.3 kg. ], 11 kv cross bracing for dp structure [galvanized] [51.7 kgs.], lt angle bracket [50*50*6 mm] with back clamp [gavanized], tapping channel [gavanized], ms angle [65*65*6 mm] for guarding of 11kv [galvanized]

CTN :41430559

15 Sep, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply and installation of training items for solar technician (electrical) trade under craftsman training scheme (cts) at consignee locations - measuring steel tape: 5 meter, plier: combination, 200 mm, screw driver: insulated, 4 x 150 mm, screw driver: insulated, 6 x 150 mm, screw driver: insulated, 8 x 200 mm, screw driver: insulated, 10 x 250 mm, center punch: 100 mm, electrician s knife: 100 mm, neon tester: 500 v, steel rule: 300 mm, graduated both in metric and english unit, hammer: cross peen, 500 grams with handle, chart: electrical symbol and basic electronic component, pipe vice: 100 mm, hand vice: 50 mm, bench vice: 100 mm, hacksaw frame: adjustable, 250 mm to 300 mm, hacksaw frame: fixed, 150 mm, file: flat, second cut, 200 mm with handle, file: half round, second cut, 200 mm with handle, file: round, second cut, 200 mm with handle, plier: long nose, 200 mm, plier: flat nose, 150 mm, plier: round nose, 150 mm, spanner set: double ended, 6 mm to 32 mm, set of 12, standard wire gauge: metric, portable electric rotary hammer drill machine, crimping tool: 0.5mm to 16mm , crimping tool: 2.5mm , 4mm , 6mm , crimping tool: 25mm to 400 mm , plier: side cutting, 200 mm, wire stripper: adjustable length, hammer: ball peen, 500 grams with handle, scriber: bend and straight, 150 mm, 5 tray cantilever tool box: w:d:h = 450:200:200, 20 mm, plastic tool box: w:d:h = 550:300:250, 20 mm, 7 drawer tool trolley: w:d:h = 700:450:900, 25 mm, allen key set: hexagonal, 1.5 mm to 10 mm, set of 9, scissor: 200 mm, paper, plastic handle, right hand, electrical load trainer, torque wrench: 5 nm to 25 nm, pipe cutter: wheel type, 3 mm to 30 mm, pipe cutter: for pvc pipe, upto 42 mm, engineer s square: 150 mm blade, load bank: variable, 1.2 kw, lamp/ heater type, wire cutter and stripper: 150 mm, earthing plate set, earthing electrode set, micrometer: outside, 0 mm to 25 mm, lc = 0.01 mm, tap and die set, platform trolley: 150 kg, rooftop mounting structure: 2 kw, gi, rooftop mounting structure: 2 kw, aluminium, electrical wiring and switch gear rack: training kit, protective relays and contactors trainer, demonstration board: circuit breakers and fuses, rccb with isolator, demonstration board: electrical cables, solar dc cable: 4 sq.mm, red, solar dc cable: 4 sq.mm, black, mc4 solar connector, hacksaw blade: length = 300 mm, width = 12.5 mm, thickness = 0.63 mm, tpi = 18, low alloy, packet of 100 blades, pickaxe, spade, wheel barrow: 2 wheels, 50 liters, trowel: brick, 8 inch x 5.5 inch, trowel: heart, 6 inch, trowel: plastering, 8 inch x 5 inch, trowel: pointing, 6 inch, plastic tub: 20 liter, manual earth auger, stillson pattern pipe wrench: length = 300 mm, opening = 42 mm, spanner: adjustable, 300 mm, universal quick adjustable multi-function wrench spanner set, multimeter: solar, insulation resistance tester: digital type, hydrometer, solar insulation tester: digital, pyranometer, lux meter: upto 1 lakh lux, magnetic flux meter, clamp meter: solar, soldering iron set: solar technician (electrical), thermometer: digital, 0 to 150 degree celsius, sun shine recorder, weather monitoring station, sunlight radiation meter, magnetic compass, cut model: photo voltaic cell assembly, cut model: lead acid battery, battery: lead acid, tubular, solar, 12v, 150 ah, simulator: solar cell characteristic study, iv curve tester, sun path finder, solar energy trainer with grouping of solar cells, demonstrator kit: solar tracker, solar pv e-learning software, halogen lamp with stand, bench grinder: double ended, 200 mm, solar photovoltaic module: 75 w mono crystalline module, solar photovoltaic module: 75 w amorphous silicon module, solar photovoltaic module: 250 w thin film module, solar photovoltaic module: 5w poly crystalline module, solar photovoltaic module: 10w poly crystalline module, solar photovoltaic module: 40w poly crystalline module, solar photovoltaic module: 250w, solar mppt meter, solar charge controller: dusk to dawn automati

CTN :41617872

12 Sep, 2025 NA

Multi City - Multi State

Tender For supply of supplying of earth plate , providing and supplying of earth electrode , providing and supplying of out side micrometer , providing and supplying of tap set , providing and supplying of trolley for transportation of batteries , providing and supplying of die for threading , providing and supplying of rooftop mounting structure , providing and supplying of electrical wiring and switch gear rack , providing and supplying of protective relays and contactors rack , providing and supplying of mccb , providing and supplying of elcb and rccb , providing and supplying of fuses , providing and supplying of cables twisted pair nonmetallic sheathed cable underground feeder cable ribbon cable metallic sheathed cable multi conductor cable coaxial cable direct buried cable , providing and supplying of solar cable red , providing and supplying of solar cable black , providing and supplying of three core wire , providing and supplying of battery cable , providing and supplying of resin cored solder , providing and supplying of solder wax , providing and supplying of mc 4 connector , providing and supplying of pins , providing and supplying of lugs , providing and supplying of hacksaw blades , providing and supplying of bolts nuts anchor bolts washers screws other pins lugs etc , providing and supplying of civil work utensils , providing and supplying of plumbing tools , providing and supplying of hydrometer , providing and supplying of solar insulation meter , providing and supplying of pyranometer , providing and supplying of pyrheliometer , providing and supplying of lux meter , providing and supplying of magnetic flux meter , providing and supplying of tong tester or clamp meter , providing and supplying of soldering iron , providing and supplying of temperature controlled soldering iron , providing and supplying of thermometer digital , providing and supplying of sun shine recorder , providing and supplying of weather monitoring station , providing and supplying of solar cell based sunlight radiation meter , providing and supplying of magnetic compass , providing and supplying of cut models of photo voltaic cell assembly , providing and supplying of cut model of lead acid battery , providing and supplying of lead acid battery , providing and supplying of solar simulator for solar cell characteristic study , providing and supplying of iv curve tester , providing and supplying of sun path finder , providing and supplying of solar energy trainer with grouping of solar cells , providing and supplying of solar tracker demonstrator kit , providing and supplying of solar pv e-learning software using animations for training , providing and supplying of halogen lamp with stand for illumination of solar panels in lab , providing and supplying of motorized bench grinder , providing and supplying of battery charger , providing and supplying of solar photovoltaic module , providing and supplying of solar panels , providing and supplying of solar charge controller with dusk to dawn automatic switching , providing and supplying of solar charge controller with manual switch day lighting , providing and supplying of array junction box , providing and supplying of solar lantern , providing and supplying of solar lantern assembly sets , providing and supplying of home light system , providing and supplying of solar cell kit , providing and supplying of clinometer , providing and supplying of spirit level , providing and supplying of anemometer , providing and supplying of dc table fan , providing and supplying of ac voltmeter mi type , providing and supplying of volt meter , providing and supplying of ammeter mc , providing and supplying of //bid details 2 / 84 ammeter mc centre zero , providing and supplying of power factor meter , providing and supplying of rheostat , providing and supplying of ac energy meter , providing and supplying of kilo wattmeter analog , providing and supplying of digital wattmeter , providing and supplying of phase seque

Bushing Clamp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector

State Government

State Government