Get complete information related to latest Business Management Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Business Management Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Business Management Tenders.
Tender For survey, investigation, preparation of design, drawings, supply, erection, testing and commissioning of gravity pipe distribution network from delivery chamber (of phase-i work) and pressure pipe distribution network from bleeder (of phase-i work) with ms / hdpe pipes including sh,nh & railway crossing structures and all other appurtenant structures along the pipe distribution network and scada arrangements with compatible sluice valves, butterfly valves, flow meters, discharge control meters at each 20 ha outlet and air valves, scour valves wherever necessary in complete manner etc, for providing irrigation facility to an ica of 16000 ha in badami taluka, bagalkot district under kerur lift irrigation scheme phase 2 including supply of spares, accessories & tools including operation & maintenance of the entire system for five years from the date of successful commissioning on turn-key basis (indent no 2788)
Tender For supply of latest is and description , supply and install non return valve nrv of ci of size 50 mm as per latest is and description , supply and fixing stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle, of dia 20 mm as per latest is and description , supply and fixing stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle, of dia 15 mm as per latest is and description , supply and fixing mild steel pot strainer of 100 mm bore as per latest is and description , supply and fixing new mild steel ystrainer of 80 mm bore as per latest is and description , supply and fixing new mild steel ystrainer of 65 mm bore as per latest is and description , supply and fixing new mild steel ystrainer of 50 mm bore as per latest is and description , supply and install pressure gauge in the pipe lines suitable for dia 15 mm pipe as per latest is and description , supply and install thermometers in the pipe line suitable for dia 15 mm as per latest is and description , gi pipe medium grade of 50 mm dia , gi pipe medium grade of 20 mm dia , gi pipe medium grade of 15 mm dia , supply assembly and erection of pgi sheet with tdf flange of thickness 22 gauge sheet as per description , m and l for duct insulation with 25 mm thick all as per description , m and l for wraping glass cloth incl uv chemical coating over nitrile rubber. thickness of glass cloth shall be provided as per oem recommendation , m and l for supply air grilis with extruder aluminium powder coated and size and type of air grills alongwith air volume shall be provided as per oem recommendation , m and l for return air grills with extruder aluminium powder coated without air volume control shall be provided as per oem recommendation , dismantling old false ceiling any type as per description , supply and install 3 way valve of ci of size 80 mm dia , demolition of brick work or floor as per description , m and l for brick work with sub class b brick straight or curved as per description , m and l for plastering 12 mm thick on fair faces of brick as per description , m and l 150 mm thick cement concrete 1 ratio 2 ratio 4 type b2 40 mm graded broken stone aggregate as per description , supply laying testing xlpe cable insulated heavy duty 1100 volts aluminium conductor of size 150 sq mm 3 and half core as specified and directed , m and l for 100 mm bore steel tubing light grade complete all as specified and as directed , supply laying testing xlpe cable insulated heavy duty 1100 volts aluminium conductor of size 95 sq mm 3 and half core as specified and directed , m and l for xlpe insulated armoured ug cables 3 point 5 core x 50 sqmm 1100 volts grade aluminium conductor including termination complete as specified and directed , m and l for xlpe insulated armoured ug cables 3 point 5 core x 35 sqmm 1100 volts grade aluminium conductor including termination complete as specified and directed , m and l for xlpe insulated armoured ug cables 4 core x 16 sqmm 1100 volts grade aluminium conductor including termination complete as specified and directed , m and l for earthing complete with gi earth plate electrode 600 x 600 x 6 mm thick burried directly in ground with 32 x 6 mm gi strip , sitc of lt control panel board cubical type indoor type floor mounted weather proof fabricated out of 2 point 0 mm crca sheet ae per drawing.
Tender For survey investigation design supply installation testing and commissioning of tank filling scheme head works consisting of construction of intake well with connecting pipe jack well cum pump house vertical turbine pumps coupled to motors pump house elec works necessaty valves delivery pipe manifold system electrical panel soft starter capacitors 11kv transformer 11 or 0.433 kv substation kv power line and 11kv terminal bay rising main pressure distribution for filling up of 5 nos of mi or zp tanks by lifting water from bhadra river near donabaghatta village of bhadravathi taluk including operation and maintainance for a period of 5 years after successful completion of work for donabaghatta tank filling scheme on turn key basis
Tender For corrigendum : work of outsourcing statutory work of testing, examination, inspection and certification of lifts, lifting machines and lifting tackles & pressure vessels at gsecl, kltps
Tender For supply of operation and maintenance services preventive and breakdown for first year , operation and maintenance services preventive and breakdown for second year , mechanised cleaning and de silting of aeration tank of size 4.71m , brush spray painting of various metal surfaces , supply and replacement of existing 100mm dia pressure guages , supply and replacement of existing v belt of air blower , dismantling overhauling and servicing of all type of centrifugal pumpsets upto 2 hp , dismantling overhauling and servicing of all type of centrifugal pumpsets above 2hp upto 5hp , dismantling the existing centrifugal pumpset upto 2 hp , dismantling the existing centrifugal pumpset above 2hp upto 5hp , dismantling lifting lowering painting and re installation upto 2 hp , dismantling lifting lowering painting and re installation above 2hp upto 5hp , dismantling lifting lowering, painting, rewinding and re installation upto 2 hp , dismantling lifting lowering painting rewinding and re installation above 2hp upto 5hp , dismantling overhauling and servicing of all type of hydro pneumatic system 2.5 hp , dismantling overhauling and servicing of all type of hydro pneumatic system 5.5 hp , dismantling all type of hydro-pneumatic system 2.5 hp , dismantling all type of hydro-pneumatic system 5.5 hp , rewinding of following capacity blower motor 20hp motor , rewinding of following capacity blower motor 3hp motor , supply of industrial salt , supply of poly electrolyte , supply of sodium hypo chlorite , supply of alum , supply of lime , supply of gear oil for air-compressor , supply of teflon tape , supply and fixing of 2.5 sqmm x 3 core flat cable , supply and fixing of 4 sqmm x 3 core flat cable , three pole contactors upto 3hp , three pole contactors above 3hp upto 5.5hp , supply of ppe kit porotective work wear , supply of hand gloves , supply of eyegear , supply of mask , testing of ph test bod tests cod tests suspended solids tests total dissolved solid oil and grease mlss , dsr 2022 rs. 200000
Tender For providing of testing service for on-board /commissioned equipment/ instrument related to plant - testing & certification of pressure equipment at hurl, sindri plant; as per scope of work; as per scope of work
Tender For providing of construction of drain for 2x210 mw ash water recirculation system at ptpp, parichha. - engaging jcb on hire bases including hire fuel driver helper etc. complete. , clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. , demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of material within 50 metres lead as per direction of engineer-in-charge in lime mortar , earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. , filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. , providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - all work up to plinth level : 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) , "centering and shuttering including strutting, propping etc. and removal of form for : suspended floors, roofs, landings, balconies and access platform" , steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.thermo-mechanically treated bars , random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : cement mortar 1:6 (1 cement : 6 coarse sand) , brick work with fly ash (non modular) bricks of class designation 7.5 in foundation and plinth incement mortar 1:6 (1 cement : 6 coarse sand) , 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) , supplying and filling in plinth with jamuna sand under floors, including watering, ramming, consolidating and dressing complete. , "hire charges of pump set of capacity 4000 litres/hour for dewatering which include cost of services of operating staff, cost of lubricating oil, diesel / petrol/ kerosene oil , other consumables for running the plant and machinery. the hire charges of plant machinery on per day basis are for single shift of eight working hours." , providing and laying non pressure np-4 class (heavy duty) r.c.c. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 900 mm dia rcc pipes.
Tender For corrigendum : enquiry for the work of testing of pressure vessels,lifting tools and tackles and preparation of on site emergency plan for 3x20 mw mhps mppgcl shivpuri.
Tender For following works shall be carried out quarterly during the contract period for the two identical sets of co2 flooding system at mghe power house. the one set of system for carting to the units-1,2,3&4 and the second set of system for carting to units-5,6,7&8. i)cleaning of heat detector externaly with dry cloth ii)ensure working condition of heat detectors iii)cleaning of smoke detector externaly with dry cloth iv)ensure working condition of smoke detectors v)simulate heat and smoke detector simultaneously and check for cross zone vi)checking for leakage in pilot cylinder vii)checking the weight of co2 pilot cylindersviii)check the condition of co2 pilot hose ix)check the condition of co2 discharge hose x)inspect pressure switch and check for its functioning xi)inspect maual call points and check for its functioning xii)inspect abort switch and check for its functioning xiii)inspection of online weigh monitor and check for its functioning xiv)inspect hooter with strobe and check for its functioning xv)checking for healthiness of the battery xvi)checking the condition for slave nrv xviichecking the condition for master nrv xviii)checking of solenoids. xix)refilling of co2 cylinder and pressure testing 45 kg capacity and 4.5kg capacity (in case release of co2 gas during generator fire incidents) xx)any other work connected with the system not explicitly mentioned shall also be carried out for safe and proper operation of the system. xxi)conducting the demo of operation of the co2 flooding system twice (once in 2 quarter) during the annual maintenance contract period for kpcl staff.
Tender For providing, laying and jointing socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (200 mm dia di k-9 pipe) conforming to is8329/2000 with suitable rubber gasket (push on) joints as per is:5382/85 including testing of joint (laying conforming to is 12288 : (200 mm dia di k-9 pipes.) & for balance work of old work orderwith latest amendment including valves & specials as per specification with materials including all allied civil works & trial run for three month under charama augmentation water supply scheme.