Latest butyrometer shaking stand Tenders | Government butyrometer shaking stand Tenders

State Government

CTN :45274168

01 Jun, 2026 4.29 Lacs

Chhindwara - Madhya Pradesh

Tender For supply of laboratory chemicals for existing, accredited district water testing distt. laboratories of division chhindwara - colour standard potassium chloroplatinate color 500 pt-co units calibration standard 500 hazen crm with traceability certificate from iso/iec 17034:2016 , ph buffer solution traceable to srm from nist standard for ph 4+0.02 at 25 c certified reference standard with traceability certificate from 17034:2016 , ph buffer solution traceable to srm from nist standard for ph 7+0.02 at 25 c certified reference standard with traceability certificate from 17034:2016 , ph buffer solution traceable to srm from nist standard for ph 9+0.02 at 25 c certified reference standard with traceability certificate from 17034:2016 , sodium carbonate (alkalinity) standard solution traceble to srm from nist 1000 mg/l as caco3 crm withiso/iec 17034:2016 tracebility certificate , sodium chloride standard crm with tracebility certificate iso/iec 17034:2016 , calcium standard solution traceble to srm from nist 1000 mg/l as ca certified from iso/iec 17034:2016 tracebility certificate , turbidity 1000ntu calibratation standard formazine certified referance material with iso/iec 17034:2016 tracebility certificate , conductivity standard solution pottasium chloride (nominal 1410 micro-mho/cm i.e 1.41 ms/cm)certified reference material for the measurement of electrolytic conductivity traceable to nistiso/iec 17034:2016, with traceablity cerificate , sodium hydroxide 1 n solution , ammonia solution 25% sp gr 0.91 , reagent grade 1 water conductivity less than 1 micro mhos/cm^2 , test chlo/chlorotex reagent provided with indication of various colout shades range 0.1 to 1 ppm , hydrochloric acid about 35% , spands reagents , zirconium oxychloride reagent , sodium thiosulphate 0.01n solution , pda (phenol di sulphonic acid) solution ar/gr emparta

State Government

CTN :45290096

29 May, 2026 9.77 Lacs

Gurgaon - Haryana

Tender For supply of chemicals required for district laboratory nuh and hiring of analyst and peon on monthly basis for sub division laboratory phesd f.p jhirka - supply of 3 place manifold part(accessory for manifold filtration assembly) used for bacteriological testing (bt) 3 place manifold with ss 316 with ptfe valve make: axiva, glassco, merckmillipore, borosil , supply of inverter tubular type battery 150 ah make: exide, livguard, supply of manifold filtration assembly used for bacteriological testing (bt) branch - 6 place assemblies with high efficiency, high sensitivity and fast filtering speed funnel capacity- minimum 300ml. filth pore size -minimum 20 m funnel material all ss 316 within built ss clamp and ss lid glass or ss316 with external ss clamp and cork capacity 250 ml vacuum flask 2l capacity valve - ptfe base holder stainless steel 316l, autoclavable-121 c (15min.) membrane filter 1 pack (100 no.) as per requirement /0.45 m pack of 100 with all accessories, flask, connectors vacuum pump: air vent filter-hydrophobic ptfe(flow rate should be 19l/min. motor speed -1400 rpm, max vaccum-100 mbar) should be of latest technology and highest quality. make: pall lifesciences, merck millipore, borosil, labotronics, athena, axiva, glassco , supply of patri dish for microbiological testing (total coliform, ecolie)

State Government

CTN :45088317

29 May, 2026 1.01 Crore

Sagar - Madhya Pradesh

Tender For corrigendum : providing and installation with testing of dg sets including elevator with lighting arrangements at banda irrigation project, complete work with material and labour.

Central Government/Public Sector

CTN :44994976

28 May, 2026 NA

Ratlam - Madhya Pradesh

Tender For supply, installation, testing and commissioning of telecom material (ofc-based telecom infrastructure) in connection with ratlam division - upgradation and replacement of telecom passenger amenities and various facilities at various stations (simhastha 2028).

Central Government/Public Sector

CTN :44931994

28 May, 2026 NA

Ratlam - Madhya Pradesh

Tender For supply, installation, testing and commissioning of telecom material (cctv surveillance system) in connection with ratlam division - upgradation and replacement of telecom passenger amenities and various facilities at various stations (simhastha 2028). - upgradation and replacement of telecom passenger amenities at variousstations (simhastha 2028). (project id:-15.05.53.25.3.54.016) , supply of full hd p/t/z (pan/tilt/zoom) ip colour camera as per rdso spec. no: rdso/spn/tc/ 65/2021 rev 6.0 or latest with amendment-1 or latest. this also included all required accessories as per instructions of the site in charge. , supply of full hd ip colour camera as per rdsospec. no: rdso/spn/tc/65/2021 rev 6.0 orlatest with amendment-1 or latest. this alsoincluded all required accessories as perinstructions of the site in charge , supply of wireless router/ access point for wi-ficonnectivity as per technical specification , supply of ont with dual- band wireless ac/n ggpon hgu with 4-port gbe lan and rf overlay as per technical specification , supply of 64 channel network video recorder and 64tb storage after raid 5/6 configuration with hdd (8 nos of hdd, capacity: 8 tb each should be supply along with nvr), 2 no's ethernet port complete with all other accessories as per rdso spec. no. rdso/spn/tc/65/2021 ver6.0 or latest, clause no.10.2. the software licenses should be as per rdso spec no.: rdso/spn/tc/65/2021 rev 6.0 or latest clause 20.0. , supply of iron cage for protection of cameras , supply of stp cat-6 cable (shielded twistedpair) stp compliant with latest tia/eia568c.2 , supply of network attached storage (nas) device, on site oem warranty 3 years. ,

State Government

CTN :45318669

05 Jun, 2026 NA

Delhi - Delhi

Tender For supply of sitc of split air conditioner 2tr hot and cold compressor inverter type coil material copper evaporator coil and condenser coil eco friendly gas r32 or 410a , supply of ms angle stand for acs heavy duty stand with all accessories , supply of copper pipe complete for discharge and suction line including nitrile insulation with all accessories. s , supply of pvc heavy duty drain pipe with all accessories pipe dia 25mm and required as per site conditions. , supply of 04 core 2.5 sq mm cable with all accessories insulation types , installation testing and commisioning of all ac with all required accessories

Central Government/Public Sector

CTN :45306043

13 Jun, 2026 40.00 Lacs

Jammu - Jammu And Kashmir

Tender For maintenance of day to day complaints of water supply including connected items at various loc under ge nagrota - m&l for repair/rectification of leakage to water supply distribution lines 15 mm dia to 25 mm dia gi tubing by necessary excavation, returning/filling as required, tightening of loose joints of union, elbow, socket etc, threading if required including replacement of gi union/socket/nipple as required complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 40 mm dia to 50 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 80 mm to 150 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing /di /ci /ms of 150 mm dia to 300 mm dia complete all as specified and directed. note : (i) the complaints for the above works shall be registered by contractor at the water supply complaint cell of age e/m (ii) stationary required such as complaint book, job cards etc shall be arranged by the contractor and proper record shall be maintained by the contractor.(iii) tools ,plumber with helper and transport with driver for attending of above complaints shall be arranged by contractor. (iv) the rate quoted by the contractor for above jobs under item no 1 to 4 shall be inclusive of cost of works under note (i) to (iii) above. (v) the said complaints shall be rectified within 12 hrs of the registration of the complaints failing which recovery of rs.500/commplaint shall be made for contractors due payment (vi) the stores/item required for the works under item no 1to 4 shall be measured separately under relevant item as supply only. (vii) excavation, returning/ filling shall be measured and paid for separately and material required for the works above shall be included to quoted rates., excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep including getting out in hard/dense soil complete all as specified and directed., returning /filling including watering , leveling , spreading and well ramming in layers not exceeding 25cm thick complete all as specified and directed., removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 50 metre above the starting point complete all as specified and directed., refixing/relaying of old retrieved steel tubing in new or old position with and including new gi fittings (connections) and as per site requiremen laid in trenches, above ground level or in any position of following sizes as under complete all as specified and directed : -, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, taking down unserviceable gi tubing / upvc tubing from any position complete with all fittings & connections from any position of following sizes as under complete all as specified and directed :-, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and fixing/laying & testing of galvanised steel water tubing, medium grade, isi marked complete with all new galvanized fittings of following sizes laid in trenches/ above ground level or in any position complete all as specified and directed :, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and laying upvc pipe tubings medium grade pressure rating 10 kgf/cm2 isi mark with all fittings such as elbow, bends, sockets, nipples and union etc and fixed complete laid in trenches or in any other position of following sizes as under complete all as specified and directed , 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply only gi fittings, medium grade, isi marked of following sizes as under complete all as specified and directed :-, union 15 mm dia, union 20mm dia, union 25mm dia, union 32mm dia, union 40mm dia, union 50mm dia, socket 15 mm dia, socket 20 mm dia, socket 25 mm dia, socket 40 mm dia, socket 50 mm dia, reducer socket 40mmx50mm, reducer socket 15mmx20mm, reducer socket 20mmx25mm, elbow 15mm dia, elbow 20mm dia, elbow 25mm

State Government

CTN :45285975

28 May, 2026 1.21 Crore

Daman - Gujarat

Tender For providing and supplying modular furniture for newly constructed government school building at kachigam, nani daman. - civil works, providing supply and installation of corner sink table -size :-1100mm l x 1100mm d x 900mm hconstruction : floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an independent unit. cabinet should of square non-sharp edge construction. doors should be assembled with ss-304 hinge assembly. removable back panel should be provided to easily access the service lines running behind the cabinet benches. intermediate horizontal channels should be provided between door and drawer. toe-space of 90mm x 90mm is provided at front-bottom side of cabinet. levelers are provided for easy leveling of welded cabinet. shelf should be eight-bend panel with 20mm height. drawer tray should be of single piece construction. drawer should be well supported on lh and rh ball slide suspension system. steel door and drawer front should be of double wall construction with sound dampening material filled inside. doors should be easily removable and hinges should be easily replaceable. knee space panel should be in 22 gauge , cabinets are tested as per sefa 8m standard from a sefa approved lab and also tested as per en 14727 from a third party testing agency having nabl accreditation. dimensions : w= 900 mm, d = 900 mm, h = 875 mm configurations: 1 shutter - 1 nos moc: mscrca: is 513 (1994) thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel is of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel is of 0.8mmthk. finish: powder coating pure epoxy, thickness 40-50 microns , followed with 9 tank pre treatment process the thickness of powder coat should be 45-50 microns, which passes the test of salt spray for 1000 hours. it should have a high temperature withstanding capacity with excellent electrical insulation properties.the rear portion of above accessories which is in contact with live metal should be made from thermo set material which will not melt on heating.handle : anodized aluminum recessed-type, ctc: 160.0mm lock: units have a locking facility with 180 and 10 lever cam lock mechanism (except for sink and corner unit) hinge: ss hinge screw: ss 304.shutter : should be of twin-type construction with sound dampening effect using profill.shutter cover should be equipped with bump on for sound dampening. base moulding should be made of pvc with corner clips. ball slide: 500mm length shutter should have provision of roller catch.pp sink,polypropylene molded sinks: made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. sink - bowl size to be a minimum of (l x w x d) 560 x 355 x 300 mm.faucet - 3-way type faucet as per approved makeworktop : jet black granite: it should be 19mm (+/- 2mm) thick jet black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. the backing material used is a neoprene mat of 6 mm thickness. (make as per selection of architect or selection of higher authority), providing supply and installation of corner table - size 1100mm l x 1100mm d x 900mm hconstruction: floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an indepe

State Government

CTN :45303639

06 Jun, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates of plant and machinery and materials category items for preparation/amendment of schedule of rate for the year 2026. - m 1055 - pumps supplying submersible pump sets confirming to is 8034 and motor confirming to is 9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. motor suitable for working on 415v+10%, 3ph, 50 hz, a.c. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. the pump set shall be suitable for direct coupling. pump shall have suitable outlet as per manufacturers design. anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump., submersible pump set 100 mm dia (with polypropylene/ noryl impeller) up to 20 stages 1 h.p. , 1.5 hp, 2 hp, 2.5 hp, 3.0 hp, 4.0 hp, 5.0 hp, submersible pump 150 mm dia (with bronze/ss impeller) up to 8 stages, 1.5 hp, 2.0 hp, 3.0 hp, 4.0 hp, 5.0 hp, 6.0 hp, 7.5 hp, m 1056 - pressure guage providing fabricating, testing and commisioning pressure vessel fabricating in m.s plate on providing foundation including epoxy paint, pressure gauge (100 mm dia), pressure gauge (150 mm dia), vacuum / combination gauge, m 1057 - lifting equipment chain pulley block supplying triple spur gear type chain pulley block suitable for capacity as below with 3 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per is 3832 carrying isi mark., 1 tonne capacity, 2 tonne capacity, 3 tonne capacity, electric operated circular or rectangular travelling crane (single girder) supplying single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class ii duty, all three motions electrically operated by suitable rating motor ip 54, control panel and down pendant control block., 5 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, 7.5 tonne capacity, above 6 m upto 8 m span, above 8 m up to 10 m span, 10 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, m 1058 - lightening arrester, ab switch, insulators, lightening arrestor supplying, erecting approved make thyrite type lightening arrestor suitable for h.t. supply with necessary ancillary material complete on provided cross arm and connected to overhead line., suitable for 11 kv supply, distribution class, suitable for 22 kv supply, distribution class, suitable for 33 kv supply, station class, disc insulator. supplying, erecting porcelain disc type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, pin insulator supplying, erecting porcelain pin type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, air break switch without earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps, suitable for 11kv line, rocking / tilting type, rotating type, suitable for 33kv line, rocking / tilting type, rotating type, air break switch with earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch with earth switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for op

corporations/Associations/Others

CTN :45300161

02 Jun, 2026 4.25 Lacs

Alwar - Rajasthan

Tender For supply and fixing of high mast light material at mia alwar - providing & fixing of ik08 ip-66 protected high power led flood light system with single piece pressure diecast aluminium housing, toughened glass diffuser with suitable lenses on led to achieve various beam angles, of high power led of 3 to 5 watt each . integrated potted driver as a unique bis r number having efficiency more than 85 % and in compliance to bis certified and trade mark certificate. the system level luminaire efficacy >=125 lm/ wt. led driver input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety .power factor >0.95 , thd(i) 10% , driver current =750ma. driver should be phase to phase protection of 440 v for 4 hrs. electrical connector , surge protection min >=4kv internal and 10kv external but inside driver compartment, system life of 50000 burning hours with 70% of initial lumens maintained, cri>70 and cct 5700k 355k. manufactures word mark/name engraved/embossing/screen printing on die cast housing to allow traceability/authenticity. fixture shall be is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., high power led flood light minimum lumen output 14800 lm

Butyrometer Shaking Stand Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors