Get complete information related to latest C Arm Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic C Arm Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding C Arm Tenders.
Tender For supplying and erecting various items under m.c.area wardha - electrical, design, manufacturing, supply and errection of hot dip galvanised, polygonal stadium masts with fixed head frame suitable for mounting 40 nos. of 500 w led pwd approved make flood light fixtures complete with all accessories as required. the height of the mast from base upto top of head frame shall be 33.0 mtrs. the mast has been designed considering base wind speed @ 44 m/s as per is 875 part-3.mast shall have foundation bolt, 1 nos. li with all accessories and and safety cage ladder for maintance purpose, supply of 500 w pwd approved make led lighting fixtures, making m-25 cement concrete foundation suitable by considering the safe soil bearing capacity at site as 10 t/sqmm at 2.5 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete.(for 33 m high mast as drawing enclosed)., supplying and erecting decorative high brightness led luminaires 1x60 watt high efficiency at reduced wattage. the luminaires comprises of specially contoured high strength and anti corrosion mounting on internally threaded pipe of designation m30, cable entries for through - wiring of main of main supply cable, earth connection safety class-i with ip65 protection, ce conformity mark, prewired with led driver suitable for operation on 240 v, 50 hz, single phase ac supply finished with pure polyster powder coated black: similar to specification of "k-lite make model juno - column light (model no. kp-7034)", supply, of external manrider unit with motorized system for accessing the head frame. the unit shall be suitable for safe load carrying capacity of 300 kg with climb speed not exceeding 9m/min., supplying and erecting architecturally designed and structurally sound arched tubular street lighting decorative pole of height 6000 mm, with single arm architecturally designed bracket having overhang of 1000 mm suitable for various pendent type street lighting luminaries material used for tubes steel of grades yst 210 groove technique using high end mig welding process the pole coated with epoxy zinc phosphate primer and finished using environmentally stable polyurethene base black paint. the pole consist of built in control box with cast aluminum service door and safety rope the control gear tray is prewired with mcb, terminal connectors for loop out arrangement the pole surface mounted with base plate of steel of grade e250 as per is2062:2011, complete with foundation hardware on provided c. c foundation., supplying and erecting outdoor stand mounted feeder pillar for 33 mtr. high-mast of the same manufacturer with 1 no. 250 amp. mccb incomer, 4 nos 63 amp mccb for outgoing, 24hr astronomical time switch with minimum 5 years battery backup, 25 a tp contactor for automatic switching of luminaries, 2 no. 9a contactors and raise/lower push button, ryb phase indication 230 vac, 1 phase digital ammeter 0-600 amp., 1 phase digital voltmeter 0-500 va meter, with cts provision for termination of adequate size of incoming and outgoing cables complete erected in min. 14 swg crca sheet box with supporting angles, self lock, gasket and slanting top erected on cc foundation complete
Tender For procurement of critical recommended spares of kosan carousel installed at kanpur lpg bp - lower bell 80/98l, pcb, cuc mkiv arm, hmi-ctrl, board,pitxe38 qc 1.91ghz (e3845), ex power interface cpiex pl004020 mk3, test head compact 25.6 india gen-iii, cir transmitter mounted, cir receiver mounted 1
Tender For supply delivery and replacement of spares for sub-station at mandalkuli water supply scheme , raipur block under bankura mechanical division, phe dte. - "control transformer supply80 va, 240 v / 110 v", "aux contractor supply (4 no 4 nc)make: siemens / abb, coil voltage: 110 v ac", "pcb relay card supply for avr as per existing circuit ", voltage controller potentiometer (1k) supply, "1100 va ups supply output power wattage 660w or equivalent , input-50 hz , wide input voltage range 145-290 v, 2x 7.2 ah (or equivalent) battery , provides 30-90 min power back upmake: apc, input: 230 v ac", "240 sq. mm. x 3 core, 11 kv grade, indoor type, heatshrinkable end termination kit supply ", "240 sq. mm., 11 kv grade, indoor type, heatshrinkable kit jointing charges", "avr throughout inspection and control operation checking and rectification by opening the cover , checking the throughout circuits with aux. contractor replacement charges, pcb relay card with voltage controller potentiometer replacement charges, control transformer replacement charges, old ups replacement and new ups installation charges fixing of heat srinkable kit & other as per direction . ", supply and delivery of following spares for battery charger panel:, supply of 65 ah smf vrla battery with 6 nos cell, polyproplene container make: exide, consisting of 9 nos. 12 v batteries (model-ep 65-12 or equivalent), "charges for old defective battery rack by disconnection all the electrical circuit and fitting fixing of the new battery rack fittings,connection of all batteries checking otesting for a certain period. ", "supply of 2.5 sq. mm x 4 core cu armored cable forbattery charger panel to 3 panel vcb , as per is-7098 (part-i )", gland supply for 2.5 sq mm x 4 core cu armored cable, laying charges of 2.5 sq. mm x 4 core cu armored cable, "charges for glanding & socketing for 2.5 sq mm x 4core cable for battery charger panel: as per direcrion of eic", "supply and delivery of following spares for 400 kva, 11 kv/433 v, transformer-1 & 2:", oti (4 inch. dia) supply make: ptci, "wti (4 inch. dia) supply make: ptci", oti replacement charges, wti replacement charges, "supply of 2.5 sq. mm x 10 core cu armored cable for 3panel vcb to transformer-1 & 2 as per is-7098 (part-i ) ", gland supply for 2.5 sq mm x 10 core cu armored cable, laying charges of 2.5 sq. mm x 10 core cu armored cable , supply of 2.5 sq mm cu pin lugs , supply of 2.5 sq mm cu fork lugs, "charges for glanding & socketing for 2.5 sq mm x 10core cable of 400 kva, 11 kv/433 v, transformer-1 & 2: as per direction of eic", supply and delivery of following spares for single panel vcb:, 240 sq. mm. x 3 core, 11 kv grade, indoor type, heat shrinkable end termination kit supply, 240 sq. mm., 11 kv grade, indoor type, heat shrinkable kit jointing charges, 200-watt space heater supply make: reco, 230 v , "thermostat supplymake: elcon gold, model: mm-106,range: 30? c - 110? c, 15 amp., 230 / 250 v ac", "3 nos. space heater along with 1 no. thermostatconnection wiring charges as per direction of eic", supply and delivery of following spares for 3- panel vcb: , "240 sq. mm. x 3 core, 11 kv grade, indoor type, heatshrinkable end termination kit supply", "240 sq. mm., 11 kv grade, indoor type, heat shrinkablekit jointing charges", 200-watt space heater supply make: reco, 230 v , "thermostat supplymake: elcon gold, model: mm-106,range: 30? c - 110? c, 15 amp., 230 / 250 v ac", 2.5 sq. mm. s/c, 1.1 kv grade control cable supply for space heater and thermostat wiring , "2 nos. space heater along with 1 nos. thermostatconnection wiring charges for each panel as per direction of eic", "3 nos. space heater along with 1 no. thermostatconnection wiring charges as per direction of eic", attending the fault at mandalkuli, bankura district with carrying different testing, servicing kit/machine like insulating resistance checking machine (1 kv, 2.5 kv, 5 kv) 3 phase variac, current injection machine/ kit, voltage