Get complete information related to latest Cab Light Fitting Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Cab Light Fitting Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Cab Light Fitting Tenders.
Tender For provn of dry ration stores under ge 881 ews - sch a part-i (building work):-this schedule is not pre-priced by mes and the pre-priced rate indicated as "rs. 0.00" under col.5 signifies this fact only., construction of block of storage shed complete all as shown on drawings and as specified., total amount of sch a part - ii (site clearance/development work), total amount of sch a part - iii (internal electric supply work), total amount of sch a part - iv (protective work), total amount of sch a part - v (area drainage work), total amount of sch a part -vi (road, path and culvert work), total amount of sch a part -vii (external electric supply work), total amount of sch a part -viii (demolition/dismantling work), sch a part - ix (misc items of work) note : this schedule is not pre-priced by mes and the pre-priced rate indicated as "rs. 0.00" under col.5 signifies this fact only., double walled corrugated (dwc) pipe for cable protection with outer dia 50mm and inner dia 38mm including suitable size of coupler for connection of pipe complete all as specified and directed., point wiring for one light/fan point/call bell point controlled by one way switch 5 amp with 1.5 sqmm single core multi standed copper conductor frlsh insulated and unsheathed heavy duty cable in colour code including earth wire with cable of size 1.5 sqmm copper conductor frlsh insulated, drawn into and including concealed in pvc conduit of not less than 20mm dia and 1.5mm wall thickness (isi marked) terminated into annealed steel terminal boxes including modular plate and cover for mounting modular switch/ socket switches, sockets, fan regulators etc complete all as specified and directed., all as per srl item no. 12.00 above but for one 3 pin 5 amp socket on same board., all as per srl item no. 12.00 above but for one 3 pin 5 amp socket on independent board., earthing complete with galvanized steel earth plate electrode 600x600x6mm burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level connected with galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 15mm dia gi light grade protection pipe, 20mm dia gi medium grade watering pipe with funnel including charcoal, dust, salt, pcc m-15 type b1 in pit with angle iron (25x25x3)mm frame work with precast rcc 1:2:4 type b-1 cover reinforced with 8mm dia tmt bars @ 150mm c/c both ways and 12mm dia ms fabricated handle, test point etc. in and including light grade gi protection pipe 20mm bore up to 7.5m length for drawing in earth lead wire, all as shown in electric plate no. 3 of ssr part-i complete with necessary earth work in any type of soil, removal of soil to a distance not exc. 50m, testing on completion complete all as specified and directed.note:- on testing after completion of earthing, if desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk & cost to the entire satisfaction., inverter led lightfittings batten type, 1x20w led, 230v, complete with all accessories internally per wired including lithium lon battery with charging time 8 to 10 hours and back up time up to 4 hours and connecting up with pvc insulated and sheathed, 1100 v grade, flexible, multistranded copper conductor three core cable complete all as specified and directed., led street light/ security lightfitting 35 watt, 230 v, ac, outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with ip 66 protection, including provision of gi bracket made of 40mm dia, gi pipe, 1.5m long, bend to shape, complete all as specified., mcb, spn, 240 volts, 40 to 63 amps,10ka, breaking capacity, complete all as specified., mcb, spn, 240 volts, 6 to 32 amps,10ka, breaking capacity,
Tender For supply of led lightfitting for passenger area (cabin) of lhb type ac coaches type-l (18 watt), conforming to rdso spec. no. rdso/pe/spec/tl/0091-2016 (rev. 1), rcf annexure - 1, 2, 3 and as per rcf drg. no. lw-76090 (alt. b).[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted:max 8 lacs ]
Tender For supply of led lightfitting, 9 watts to rdso spec. [led lightfitting, 9 watts to rdso spec. no.rdso/pe/spec/tl/0091-2016, rev-1 and drg. no. icf/std- 7-6-042 item-2.]
Tender For supply of glf spares at vijayawada international airport for year 2025-26 - supply of faa complied and meeting icao annexure-14 requirement medium intensity elevated type omni directional ama make led taxiway edge lightfitting with 1w led complete with all accessories including blue lens, lens clamping mechanism, breakable coupling, two pin secondary lead for led and cl base plate with 06 nos of m-10 stainless steel bolts and other accessories etc. complete as required. (make: ama aled)., supply of 1w led blue lamp along with led driver suitable for vardhman make medium intensity elevated type omnidirectional taxiway edge lightfitting as required. (make: vardhman), supply of 1w led blue lamp along with led driver suitable for ama make medium intensity elevated type omnidirectional taxiway edge lightfitting as required. (make: ama), supply of 35v, operational area led sign board driver, suitable to operate on runway current on series circuit current varying from 2.8 to 6.6 amp. (supply from list of aai preferred makes), supply of 35v, led strip with high luminous long life typically 50,000 hrs., 0.5w, led's assembled on aluminum pcb of size 700mm x 20mm and having 11 led's per pcb for boards. (make: osram), supply of 0.75 sq.mm, 40cm length, copper conductor, frlsh, flexible cable with both side connecters (male/female) suitable to connect to led strips (i.e. item no. 5) (as per aal approved make list), supply of 200 watt, 6.6amp, bi-pin halogen lamp with base g6.35 for runway edge lightfitting (similar to model:-osram-64386 or its equivalent from list of aai preferred makes), supply of 150 watt, 6.6amp, halogen lamp with in-built holder base pk30d for runway edge lightfitting/approach lightfittings / papi units (similar to model: -osram-64361 or its equivalent from list of aai preferred makes), supply of 105 watt, 6.6amp, dichroic reflector lamp with in-built holder with male connector for insert type lightfitting (similar to model osram-64339 a or its equivalent from list of aai preferred makes), supply of 200w, 20a/6.6a rating 5000v, 50 hz series isolating transformers encapsulated in black crosslinked polychloroprene compound like tpe /tpr/tpv with primary and secondary connections suitable to be operated via alcms system confirming to specification as required suitable for above mentioned fittings for following applications and compatible to use on alcms (supply from list of aai preferred makes), supply of 200w, 6.6a/6.6a rating 5000v, 50 hz series isolating transformers encapsulated in black crosslinked polychloroprene compound like tpe/tpr/tpv with primary and secondary connections suitable to be operated via alcms system confirming to specification as required suitable for above mentioned fittings for following applications and compatible to use on alcms. (supply from list of aai preferred makes), supply of 100w, 6.6a/6.6a rating 5000v, 50 hz series isolating transformers encapsulated in black crosslinked polychloroprene compound like tpe/tpr/tpv with primary and secondary connections suitable to be operated via alcms system confirming to specification as required. (supply from list of aai preferred makes), supply of 15w, 20a/6.6a rating 5000v, 50 hz series isolating transformers encapsulated in black crosslinked polychloroprene compound like tpe /tpr tpv with primary and secondary connections suitable to be operated via ilcms system confirming to specification as required suitable for above mentioned fittings for following applications and compatible to use on alcms, (supply from list of aai preferred makes), supply of 15w, 6.6/6.6a rating capsulated in polyster resin finally moulded in neoprene rubber for use of 6.6 amps series airfield lighting circuits having nominal voltage rating of 5kv and all rated for operation on 50 hz. the transformer shall be water tight and shall be designed for direct burial in the earth or installation in a base confirming to specification as required. suitable for above mentioned
Tender For tender for supply of electrical spare at jorhat airpor - 25 mm size of pvc casing capping as per item specification document item no 1 page no 52 , 10/20a switch and socket as per item specification document item no 2 page no 52 , 3 module pvc modular switch box as per item specification document item no 3 page no 52 , 4 module pvc modular switch box as per item specification document item no 4 page no 52 , 8 module pvc modular switch box as per item specification document item no 5 page no 52 , isi marked 5 or 6a 3 pin top as per item specification document item no 6 page no 52 , isi marked 15 or 16a 3 pin top as per item specification document item no 7 page no 52 , isi marked white colour modular type 16a switch as per item specification document item no 8 page no 52 , isi marked white colour modular type 6a switch as per item specification document item no 9 page no 53 , isi marked white colour modular type 16a socket as per item specification document item no 10 page no 53 , isi marked white colour modular type 6a socket as per item specification document item no 11 page no 53 , 1.5 sq.mm isi marked pvc insulated wire as per item specification document item no 12 page no 53 , 2.5 sq.mm frls grade strandard copper cables as per item specification document item no 13 page no 53 , 4.0 sq.mm frls grade strandard copper cables as per item specification document item no 14 page no 53 , 3 core 1.5 sq.mm cable as per item specification document item no 15 page no 53 , supply of 3 core 2.5 sq.mm flexible copper as per item specification document item no 16 page no 53 , supply of 4 sqmm 3 core flat three core industrial cable as per item specification document item no 17 page no 53 , isi marked 1200 mm sweep ceiling fan as per item specification document item no 18 page no 53 , 450 mm pedestal air circulator as per item specification document item no 19 page no 53 , 300 mm 1400 rpm single phase heavy duty exhaust fan as per item specification document item no 20 page no 53 , 450 mm 1400 rpm single phase heavy duty exhaust fan as per item specification document item no 21 page no 53 , hand dryer as per item specification document item no 22 page no 54 , electrical door bell as per item specification document item no 23 page no 54 , 2.5 mfd capacitors ceiling fan as per item specification document item no 24 page no 54 , led type medium intensity taxiway edge light as per item specification document item no 25 page no 54 , 350 w led flood light luminaire as per item specification document item no 26 page no 54 , 90w led street lightfitting as per item specification document item no 27 page no 54 , 20w led batten as per item specification document item no 28 page no 54 , 160 amp mccb as per item specification document item no 29 page no 54 , 5 core 4 sqmm flexible pvc insulated and pvc sheathed cable as per item specification document item no 30 page no 54
Tender For supply of led lightfitting for berth reading light transverse lower berth rhs for lhb ac coaches type-f3, 2 w as per rcf drg.no. lw76095 or latest and rdso spec.no. rdso/pe/spec/tl/0091-2016 (rev.1). (rdso approved sources, rdso item id: 3100674) rcf sub item id:2400028003) [ warranty period: 30 months after the date of delivery ]