Latest cabinet box Tenders | Government cabinet box Tenders

Central Government/Public Sector

CTN :40916200

19 Jul, 2025 61.5 Thousand

Jamnagar - Gujarat

Tender For corrigendum : providing of repair and overhauling service - repairing of shaft seal cooling pipeline and overhauling of servo locker; servo locker- mtu and shaft seal cooling line mat- cu-ni; no; buyer premises

Central Government/Public Sector

CTN :41054186

22 Jul, 2025 NA

Purba Medinipur - West Bengal

Tender For providing of repair and overhauling service - splash target securing arrangement food warmer door renewal wooden locker fabrication; splash target securing arrangement food warmer door renewal wooden locker fabrication; no; buyer premises

CTN :41054526

02 Aug, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For repair, maintenance, and installation of plant/ systems/equipments (version 2) - as per sow; as per sow; service provider-work for augmentation of security accessories and fittings along with refurbishment in qrt room-1 supply & installation of customised double foldable bunk beds with thich pipe and heavy rod along with mattress (size: 6"*2.5"). to be fabricated as per site lay out/ space available. design drawing is to be approved by the buyer prior to production. to the scale autocad/3d view to be generated and approved by buyer. 3 nos, 2 supply & installation of customised 4 seater foldable wall amounted ply with lamination open both sides dining table (4'*2'). suitable back laminate matching with wall d cor is to be applied. the same to be customised based on avaialble space. 1 nos, 3 supply & installation of humidity control device - 1.5 ton, including accessories, stabiliser, mccb, outdoor stand 2 nos, 4 supply & installation of 50" inches cctv led display unit with wall mounted stand alongwith cabling from cctv recording room with required conduit with adequate digging for laying of pvc duct(approximate length 50 rmt) 1 nos, 5 supply of oak armless foladable/stackable plastic chairs (weight bearing capacity - 120 kgs) 4 nos, 6 supply & installation of personnel saniatry and hygienic items for bathroom and washplace based on site-visit. 1 job, 7 customised termite proof gypsum based roof ceiling to reduce heat by creatin an insulated space and minimizing direct sunlight exposure 1 job, 8 supply & installation of customised modular storage rack (6'*3') for qrt weapons, accescories with lock and chain and frontal transparent acryllic sheet, necessary stickering. 1 nos, 9 securing of all electrical cable including false ceiling down lighting, switches, concealed wiring for cctv line, dth, ac, telephone etc) 1 job, 10 supply and installation of exhaust and recirculation system for effective air cycle changing 2 nos 11 supply & installation of roller blinds for windows (06 nos) 150 sqft 12 supply & installation of hangers and metallic stoppers for rifles with plywood plus laminate in the backdrop. 1 job 13 supply & installation of customised wooden locker to keep f/f appliances with frontal transparent acyllic sheet and locking arrangement. 1 job, 14 painting of walls (inside roomk) including material. placement of qrt room tally with necessary illumination 1 job, 15 supply of customised wooden centre table (4'*2') with magazine holder. 1 nos.

CTN :41054991

14 Jul, 2025 51.6 Thousand

Bathinda - Punjab

Tender For providing of repair and overhauling service - amplifier 400 tca ,4000em; unbranded; yes; buyer premises,repair and overhauling service - 2 ton 5 star split ac hot and cold; unbranded; yes; buyer premises,repair and overhauling service - godrej locker; unbranded; yes; buyer premises,repair and overhauling service - emergency light 7 watt; unbranded; yes; buyer premises,repair and overhauling service - cctv camera; unbranded; yes; buyer premises,repair and overhauling service - led illuminating letter; unbranded; yes; buyer premises,repair and overhauling service - videocon led 32 inch; unbranded; yes; buyer premises,repair and overhauling service - camera nikon coolpix; unbranded; yes; buyer premises,repair and overhauling service - scany portable scanner; unbranded; yes; buyer premises,repair and overhauling service - epson projector eb-s41; unbranded; yes; buyer premises,repair and overhauling service - auto screen; unbranded; yes; buyer premises

CTN :41027046

11 Jul, 2025 NA

Multi City - Multi State

Tender For providing of repair and overhauling service - amplifier 400wt tca 4000em; unbranded; yes; buyer premises,repair and overhauling service - cctv camera; unbranded; yes; buyer premises,repair and overhauling service - videocon 32 led; unbranded; yes; buyer premises,repair and overhauling service - camera nikon coolpix s 3500; unbranded; yes; buyer premises,repair and overhauling service - scany portable scanner; unbranded; yes; buyer premises,repair and overhauling service - epson projector eb-s41; unbranded; yes; buyer premises,repair and overhauling service - goodrej locker; unbranded; yes; buyer premises,repair and overhauling service - auto screen; unbranded; yes; buyer premises,repair and overhauling service - unbranded 7 watt emergency light; unbranded; yes; buyer premises,repair and overhauling service - led illuminating letter sign; unbranded; yes; buyer premises,repair and overhauling service - 2 ton 5 star high wall split ac hot and cold; unbranded; yes; buyer premises

Central Government/Public Sector

CTN :41012354

16 Jul, 2025 NA

Ernakulam - Kerala

Tender For providing of repair and overhauling service - mobile locker; marine plywood; yes; buyer premises

Central Government/Public Sector

CTN :40773560

16 Jul, 2025 20.00 Lacs

Poonch - Jammu And Kashmir

Tender For corrigendum : repair of furniture for units in aor of stn hq bg under ge 881 ews - almirah large steel fd-351,339, 1031, removing unsv shelves of almirah large steel and s&f new shelves made out of 1 mm thick ms sheet with suitable clips/brackets/gas welding (if any) complete all as specified and directed by engr-in-charge., removing unsv foot rest of almirah large steel and s&f of new foot rest made out of 1.6mm thick ms sheet with continuous gas welding complete all as specified and directed by engr-in -charge., removing unsv lock of almirah large steel and s&f of new lock of six lever with duplicate key with suitable nuts and bolts all as specified and directed by engr-in-charge. make godrej/harrison/link, removing of unserviceable handle of almirah large steel and s&f of new steel handle 150mm long with suitable steel nuts and bolts complete all as specified and directed by engineer-in-charge., removing of unserviceable locking device of almirah large steel, s&f of new three way locking device (chakra/locking rod and locking cover) made out of ms round bar 10mm dia all as specified and directed by engineer-in-charge., removing of unserviceable key plate of almirah large steel, s&f of new key plate all as specified and shown on drg., welding per 5 cm wherever necessary, all as specified and directed by engineer-in-charge., m & l for two coats of synthetic enamel paint (1st grade quality shade/colour shall be approved by engineer-in-charge) including denting and painting of almirah steel large throughout inside and outside complete with spray machine after properly smoothing the surface all as directed by engineer in-charge., almirah med steel (fd-243, 340, 1032), removing unsv shelves of almirah med steel, s&f of new shelves made out of 1 mm thick ms sheet with suitable clips/ brackets/gas welddng (any one) all as specified and directed by engr-in-charge., removing unsv foot rest of almirah med steel, s&f of new foot rest made out 1.6mm thick ms sheet with continuos gas welding all as spcified in and directed by engr-in-charge., removing unsv lock of almirah med steel, s&f of new lock of six lever with duplicate key with suitable nuts and bolts all as specified and directed by engr-in-charge. make - godrej/harrison/link, removing of unserviceable handle of almirah med steel, s&f of new steel handle 150mm long with suitable steel nuts and bolts all as specified and directed by engineer-in-charge., removing of unserviceable locking device of almirah large steel, s&f of new three way locking device (chakra/locking rod and locking cover) made out of ms bar round 10mm dia all as specified and directed by engineer-in- charge., removing of unservicable key plate of almirah med steel, s&f of new key plate all as specified and shown on drg., welding per 5 cm wherever necessary, all as specified and directed by engineer-in-charge., m & l for two coat of synthetic enamel paint (1st grade quality shade/colour shall be approved by engineer-in-charge) including denting and painting of almirah steel medium throughout insided outside complete with spray machine after proper smoothing the surface all as directed by engineer in-charge., locker bed side steel (fd-1029), removing of old unsv hasp and staples of locker bed side steel and s&f of new ms hasp and staples as specified in drg and approved by the engr- in- charge., removing of old unsv conduit pipe of locker bed side steel and s&f of new cp steel 16mm dia 22 guage conduit hanging pipe all as specified and directed by engineer-in- charge., removing of old unsv handle of locker bed side steel and s&f of new cp steel handle 150 mm long as approved by engineer-in- charge., removing of old unsv hinges of locker bed side steel and s&f of new ms hinges 75mm long as approved by engineer-in- charge., removing of old unsv foot rest of locker bed side steel and s&f new foot rest made out of 1.6 mm thick ms sheet with co

Central Government And Public Sector

CTN :40977994

28 Jul, 2025 NA

Chamba - Himachal Pradesh

Tender For supply of ms plate size 16mm , ms plate size 18mm , ms plate size 20mm , ms plate size 28mm , 90 degree ms angle size 25mm , 45 degree ms angle size 25mm , ms hex bolt with nut 12x1.75x40 mm , hex screw m24x3x100 lg, material ss410 , hex screw m24x3x50, material ss410 , hex screw m24x3x125 lg, material ss410 , ss hex bolt with nut 3by8mmx16gx1 inch , ms hex bolt with nut 32x3.5x350 , ss hex bolt with nut 20x2.5x100 , ms hex bolt with nut 12x1.75x35 , ms hex bolt with nut 18x2.5x120 , ss ball valve 1 inch class 150 female thread , ss 90 degree elbow 1 inch , ss 45 degree elbow 1 inch , ss ball valve 1.25 inch class 150 female thread , ss 90 degree elbow 1.25 inch , ss 45 degree elbow 1.25 inch , 1by2 inch ball valve steel , 1by2 inch 90 degree elbow steel , 1by2 inch 45 degree elbow steel , d spanner 18x19 , ring spanner 18x19 , slide wrench 8 , slide wrench 12 , pipe wrench 8 , pipe wrench 12 , 1by2 to 1by4 inch female adapter npt , 1by4 to 1.25 inch ss adapter with 60 degree cone both side , 1by4 to 1by2 inch male adapter npt , 3by4 to 1by2 inch male adapter npt , 3by8 inch female to 1by2 inch male adapter npt , nrv 6 inch check valve , nrv 4 inch check valve , ms union 1by2 inch , ms rod hexagonal 25mm , ms rod hexagonall 40mm, 1.5 inch , 20 inch flange class 300 , brass rod 2 inch , brass rod 1.5 inch , brass rod 2.5 inch , foot valve 3 inch , pvc suction hose pipe 3 inch dia , pvc suction hose pipe 6 inch dia , clamp 4 inch , clamp 6 inch , 1by2 inch x 14 tpi bsp hss round die , o-ring 3mm , o-ring 4mm , o-ring 5.3mm , o-ring 5.7mm , o-ring 6mm , o-ring 8mm , o- ring 8.5mm , o-ring 9mm , rubber gasket sheet size 2mm , rubber gasket sheet size 3 mm , rubber gasket 2.5mm exact , steel putty 3473 , thread locker 263 , si 5900 flange sealant , sealant 495 , super metal composite 1111 , maintain 100 , m seal 75gm , hydraulic sealant 545, 50ml pack , pipe repair kit , sf 790 gasket remover 510 gm , weldon shank 3by4 inch drill bit set 6,8,10,12,16,20 mm , compressor belt size c90 1 34 , filteration plant belt a800, a30 poly f plus , new hp compressor belt 30440903 - 1000015342 , 50 hp blower belt - b3500 b136 , shaper machine belt b56 , auto darkening welding helmet , test hose stauff minimess hose g-1by4 dn4 , elc 50c cover , cutting wheel 4 inch , flap disc 4 inch , buffer wheel ag-4 , abrassive belt with cloth backing, grain- al oxide , cut resistant hand gloves, cut level 4 , die penetration test kit consisting of cleaner, penetrant and developer , filler gauge .02 to 1.00mm, 600mm length , foam-spung for oil soaking 2 inch thick, size- 4 ft x 6ft , plastic can 2 ltr , box spanner 65mm, phosphate finish , bucket 20l , digital vernier caliper , carbide drill bit set 1 to 13mm , tungsten carbide tipped tool for machining , scotch self bonding tape 3.8x9.15x0.075 cubic cm , t30 compressor oil of 5 ltr pack , gland 10mm , taflon tape , ht insulation tape 25mm wide 25m long roll , measuring tape 3 mtr , ss scale of 6inch length , hose wp 700 bar e6 series with coupling set of c604 , marker parmanent type , welding electrode 7018 - 3.15mm , welding electrode 7018 - 4 mm , welding electrode 7018 - 2.50mm , welding electrode 6013 - 3.15mm , welding electrode 6013 - 2.50mm , welding electrode e-308 - 3.15 mm , welding electrode cast iron - 119e size 2.50mm , star coupling rubber buna-n , gasket 2mm non asbestos , caf gasket 3mm thick- non asbestos //bid details 2 / 76

State Government

CTN :40894705

22 Jul, 2025 NA

Kalyan - Telangana

Tender For fixing of rate contract for supply of consumables required for network related items at corporate office and generating stations of tggenco for a period of two years from 01.04.2025 to 31.03.2027 - ip66jb(200mmx200mm) for mounting the power adopter for each camera, gigabit poe adaptor i/p 100-240v, o/p:24v dc, 0.5a with 3 pin power, for cameras, ofc to ethernet media converter, 24 port fiber liu with adaptor, plate, 24 port cat6 fully loaded patch panel, 24 port cat6 patch panel unloaded, cat6 utp cable box 305 mtrs, cat6, stp cable box, 305 mtrs, cat6 i/os with face plate & back boxes, cat6 i/os with dual face plate & back, boxes, cat6 i/os with quad face plate & back, boxes, cat6 information outlets, cat6 patch card - 1 mtr, cat6 patch card - 2 mtrs, cat6 patch card - 3 mtrs, cat 6 cable of 40 mtrs, sc-sc duplex single mode (9/125), patch card fibre -1 mtr, sc lc duplex single mode (9/125), patch card fibre -1 mtr, sc/sc duplex multimode 62.5/125?m, patch card fibre -2 mtrs, sc/lc duplex multimode 62.5/125?m, patch card fibre -2 mtrs, sc/sc duplex 62.5/125?m patch card, fibre -3 mtrs, sc/lc duplex 62.5/125?m patch card, fibre -3 mtrs, sc/sc-a single mode media, access converter 10/100 mbps, sc/sc-b single mode media, access converter 10/100 mbps, 10/100/1000 sc-sc single mode, media converter upto 20km, media access converter, 20km, supprt, atype, media access converter, 20km, supprt, btype, 10/100/1000 sc-sc multi mode, media converter, upto 2km, 10/100/1000 mbps pci lan card, 8-port unmanageable switch, 10/100mbps, 8-port gigabit unmanageable switch, 8-port gigabit poe unmanageable switch, (4xpoe+ ports), 8-port gigabit poe unmanageable switch, (8xpoe ports), 12-port unmanageable switch, 10/100mbps, 16-port unmanageable switch,, 10/100mbps, 24-port unmanageable switch, 10/100, mbps, 28-port gigabit smart managed switch, including 4 gigabit sfp ports, 1000 base-lx /lh gigabit ethernet, optical transceiver (small formfactor, pluggable (sfp)) typical reach, of 10 km (for core switch), 150 mbps wireless adsl router, dual band wi-fi router, wi-fi speed up to, 867 mbps/5ghz+400mbps/2.4ghz, 5, gigabit ports, 4 external antennas, mumimo,, dual band, wi-fi coverage with, access point mode, wireless access point (dual band, with min 300 mbps wifi range extender), 154 mbps wireless adapter, 154 mbps pci internal wireless, adapter, 6 o/l universal power network, racks, 7 o/l universal power network, racks, 6u wall mount rack (without accessories), 9u network rack (without accessories), 12u wall mount rack (without, accessories), cctv dvr rack/nvr/server/network, rack,dvr rack, dvr box wall, mounted,cctv box, abs plastic cabinet, box(size 12 inch * 11 inch * 5 inch) with, inbuilt spike buster, pole mount camera loop bracket for, cctv security camera indoor outdoor, universal compatible, single mode 6 core ofc armoured cable, single mode 12 core ofc armoured, cable, single mode ofc pig tails, module, sc-sc duplex single mode, fiber optic adapter, 60mm heat shrinkable protection sleeves, for fiber optical fusion splicer machine, splicing (pack of 100), fiber optic joint termination cylindrical box, small with ofc splicing tray, 2-way, ofc termination boxes, pvc rectangular, cpe610 23dbi outdoor cpe, access point, olte (v 1600d4-dp) genpon olt, rj45 cable tester, usb male to rj45 ethernet lan adapter, lan extender/rj45 adaptor coupler,, female-female, lan extenders with routing solution

Central Government/Public Sector

CTN :40902541

12 Jul, 2025 29.0 Thousand

Multi City - Multi State

Tender For providing of repair and overhauling service - securing arrangement of dd pump, communication ru locker and fresh water leakage in 18 navik bathroom; h-67,68 & 69; no; buyer premises

Cabinet Box Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

State Government

Central Government/Public Sector