Latest cable connection Tenders | Government cable connection Tenders

State Government

CTN :43700999

15 Jul, 2026 3.24 Lacs

Thumba - Kerala

Tender For corrigendum : transgrid down stream works at 110kv substation terls renewal of control cable connections for ct pt circuit breaker bus isolators and lightning arresters of 20 mva transformer unit 2 necessitated by transformer repositioning

CTN :45543154

03 Jul, 2026 NA

Kalyani - West Bengal

Tender For corrigendum : unction box with multiple terminals (min. 15 no. ) for enabling vms cable connection of 2340 mm dia. , vibration sensor with in built transmitter and 10 meter casble, for 2340 mm dia. di. bcb-24 coke dryi

CTN :45739203

14 Jul, 2026 NA

Kalyani - West Bengal

Tender For junction box for vms with multiple terminals (min. 15 no. ) for enabling vms cable connection of 1330 , vibration sensor with in built transmitter (in both x&y axis) with 10 meter casble, for 1330 mm dia.

CTN :45512670

02 Jul, 2026 NA

Kalyani - West Bengal

Tender For corrigendum : junction box with multiple terminals (min. 15 no. ) for enabling vms cable connection of 2720 mm dia. , vibration sensor in built transmitter with 15 mtr. cable for each sensor, of 2720 mm dia. si. bcb-92

State Government

CTN :45722156

15 Jul, 2026 NA

Chandigarh - Chandigarh

Tender For quotation for tv cable connection for guest house no. 3, sector 24, chandigarh

CTN :45666633

03 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of - pigtails for fiber cable connection qoc for pig barrel - | quantity - 1

CTN :45592297

01 Jul, 2026 30.00 Lacs

Pahalgam - Jammu And Kashmir

Tender For corrigendum : supply installation testing and commissioning of pump unit and other electro-mechanical equipments at laripora pahalgam - supply, installation, testing and commissioning of submersible type pump sets with motors and allied mechanical and electrical components/ items as per manufacturer s recommendations and guide lines, and as per the scope of the work at site. the equipment supplied conform to latest is- standards and codes with fail safe circuits/ devices for(i) over loading (ii) under loading (iii) clogging (iv) shut off (v) low liquid level (vi) single phase prevention devices (vii) over heating etc. the pumping units shall have following technical specifications: pumps:type of pump :non clog centrifugal volute type sewage submersiblepumpscapacity= 28.4lpshead = 17.5 metres or abovesolid handling capacity: 20mm (minimum) quality of water: sewage water to be handled meterial of construction:pump casing : cast ironimpeller : stainless steelpump shaft : stainless steelmotor body : cast ironsealing : dual mech. seal...contd.. as per annexure-a, providing/supplying and fitting of 100 mm m.s flanged delivery main to be connected with existing rising main at site. the job includes providing and welding of m.s flanges 12 mm thickness. the flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make. the cost on account of supply/ fabrication of bends and providing/ fitting of flanges is included in the job. (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per is14846 for regulating the water supply outside the pumping units p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, slanted seat swing check valve( nrv) as per is 5312 p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., gantry over sump :- fabrication, providing, fitting of ms gantry over sump with 02 nos. vertical columns. the gantry fabricated out of ismb-100, 3.25 mts long placed face to face. 300x300mm ms plates 12mm thick fitted on top and bottom side of column .bottom plate welded to the reinforcement of the sump and grouted in 1mx1mx1m pcc 1:1.5:3 mix. ismb-100,3mts long is to be placed and welded to the top plate of the columns .the job also includes providing and fitting of 2-tonne capacity chain pulley block with monorail along with hoisting chain (complete job)., providing and fitting of 50 mm23.5 core ,al pvc insulated cable, armouredfor internal connectionscrimping, taping etc. note:- the cable terminal ends for connection to switchgear at various requisite points shall be al. thimbles and of appropriate size and connected by hydraulic crimp tool only (complete job)., providing and fitting of 4-core 16 mm2 flat /circular submersible copper cable conforming to is: 694 (part 1st) 1964 & is: 694 (part 2nd) - 1964 for submersible pumping unit and other electrical equipment s. the cable connections terminal shall be fitted with copper thimbles of required size (complete job)., fabrication, providing and fitting of main electric control panel of appropriate size fabricated out of 14 swg sheet having required openings/vents and protection class : ip-55 & fitted with accessories as under: a) bus bar chamber: 160 amperes(tpn) b) main circuit breaker (incomer mccb) qty:- = 01 nocurrent rating = 160 amp. c) change over switch:qty. = 01 no.rating = 160 ampere....contd... as per annexure-a., electrification. providing/fitting of lighting and fan

Central Government / Public Sector

CTN :45605234

13 Jul, 2026 NA

Gooty - Andhra Pradesh

Tender For supply of traction motor cable connection shoe supporting plate. drg no. scr/dsl/et-0129/b alt.nil. ]

Central Government/Public Sector

CTN :45561348

24 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of mig/mag welding torch 3 meters length conforming to specn-iec 60974-7: acceptable make of the torch is either tbi or esab or abicor binzel or nutecsys(firm is required to attach dealership certificate for the make quoted) . size of wire: 0.8 - 1.2 mm current rating: 350amps @ 60% duty cycle (10 minutes cycle) for co2 350 amps @ 60% duty cycle (10 minutes cycle)for mixed gas type of end connection: euro connector triggering pin in end connection: movable spring loaded shielding gas: argon/co2/argo shield type of cooling: gas cooled/air cooled triggering switch: mechanical/electrical type swan neck angle and type: 45 degree to 60 degree bend-changeable swivel neck torch cable: ribbed coaxial cable connection at torch end: knuckle joint for easy maneuvering weight: light weight torch (weight not to exceed 3.5 kgs for torch with 3m length cable). [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45176419

15 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For bid to ras supply of led lighting application luminaries wattage range 72w single piece high pressure die cast aluminium fixture , ms pole 6m height medium grade 65mm , pvc frls insulated xlpe armoured 2 core cable aluminium conductor multi strand 25 sqmm , pvc frls insulated cable aluminium conductor one point five sqmm two core multistrand , mcb single pole 6 amp, 230v isi marked , ms junction box for cable connection or joint on pole , solar street light with high efficiency mono crystalline solar pv module with lithium ferro phosphate battery , gi pole 5 meter height grade 65 mm inner diameter isi marked

Cable Connection Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government / Public Sector

Central Government/Public Sector