Get complete information related to latest Cable Duct Scrap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Cable Duct Scrap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Cable Duct Scrap Tenders.
Tender For corrigendum : : supply, installation, testing & commissioning of electrical equipment for dg block 119a of inrp - ht panels (119a)supply, installation, testing & commissioning of indoor type floor mounted, single front, metal clad, 1250 a, 6.6 kv, 3 phase, 3 wire, vcb switchgear panel suitable for a short circuit current of 31.5 ka for 3 seconds, internally arc tested for 31.5 ka for 1 second, comprising of following incoming & outgoing feeders : incoming feeder: 1 no. 1250 a, 3p vcb outgoing feeders: i) 7 nos. 630 a, 3p vcbii) 1 no. 1250 a, 3p vcb as tie feederwith surge arrestors, relays, pts, cts & other necessary accessories including associated structural steel required for complete installation of the panel & equipment earthing of the panel from both the earthing terminals of the panel to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings. reference drg. nos: ip1/119a/05027339/dwg/001/r0 & ip1/119a/05027339/dwg/002/r0(note: terminal box of each incomer of 6.6kv switchboard shall be suitable for terminating 4x3cx400 sq.mm., 6.35/11kv (e), a2xwy cables.), supply of spares for ht panels as per attached spares list mentiond in section c, part ii of tender, 2.5 mva, 6.6/0.433 kv dry type transformers (119a)supply, installation, testing & commissioning of 6.6/0.433 kv, 2.5 mva, dyn11 dry type cast resin transformer having percentage impedance of 8.5% complete with ht cable end box, lt bus duct flange, off load tap changer on ht side with range of +/-5% in steps of 2.5%, wti scanner, ct for restricted earth fault protection and other necessary accessories including associated structural steel required for complete installation of the transformer & equipment & neutral earthing of the transformer from both the earthing terminals of the transformer to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings.reference drg. no. : ip1/119a/05034347/dwg/001/r0, supply of spares for dry type transformers as per attached spares list mentiond in section c, part ii of tender, 2000 kva diesel generator sets (119a)supply, installation, testing & commissioning of 3 phase 2000 kva prime power 433v, 50hz, 0.8 p.f. diesel-generator sets with 110% overload capacity for 1 hr with four (4) stroke inline or vee type cylinder arrangement having engine speed 1500 rpm, 24v electric battery starting system with a provision of interchangeability of battery bank between two dg sets, complete with all auxiliary equipment including amf control panel, auxiliary mcc panels, heat exchanger cooling system, raw water pump, remote radiator with fans on terrace, ms exhaust piping, exhaust structure (maximum 30 m stack), 4 nos. of 3.6 cubic metre fuel day tank outside dg building (for all 4 dg sets) & 1 no. of 990 ltr intermittent tank inside each dg room, ms "c" class fuel piping between engine & fuel tank, dg room accoustic treatment & complete ventilation of dg room, brushless excitation for alternator, one no. 3200 amp 415 v 4p acb, ms structural steel supports/ channels/ angles & other necessary accessories including associated structural steel required for complete installation of the dg & equipment & neutral earthing of the dg from both the earthing terminals of the dg to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & necessary statutory clearances from cpcb etc. as required and as per tender technical specifications & drawings. design and construction of foundation for exhaust pipe rack/ structure of dg set is included in the scope of the contractor.reference drg. nos. : i) ip1/119a/05034347/dwg/001/r0ii) ip1/119a/05044831/dwg/003/r0iii) ip1/119a/05044831/dwg/004/r0iv) ip1/119a/05044831/dwg/005/r0v) ip1/119a/05044831/dwg/006/r0, supply of sp
Tender For routine/breakdown and capital mtc work of l.t. motors, valve actuators, l.t. switchgear, bus-duct and d.c. system and cabling work at stps stage- i, ii, iii and iv.
Tender For routine/breakdown and capital maintenance work of l.t. motors, valve actuators, l.t. switchgear, bus-duct and d.c. system and cabling work at stps stage- i, ii,iii and iv against tn-3216 (elect.).
Tender For design, manufacture, supply, erection, testing & commissioning of new outdoor type 1600kva, 11kv/433volts, 3 phase, 50 hz, level-3 energy efficient / bee star rated-3 distribution transformer and lt bus duct with associated works in new gfm sub-station as per specification no. rwf/el/p/2025-26/05 and amendment no.1 dtd:14.11.25 to specification enclosed. ]
Tender For corrigendum : supply of silica gel indicating type (blue) for ht / lt bus duct, power and service transformers breather as moisture absorbent at stps.
Tender For fabrication, supply, installation, testing and commissioning of lt bus duct including modification, re-orientation of substation substation equipment at 503 building (wmp), frfcf, kalpakkam.
Tender For supply of 3tr ductable invereter type sac units at dwdm room bhubaneswar d d - supply of 3tr copper coil evaporator and copper coil condenser ductable ac units , installation testing and commissioning of 3 tr ductable air conditioning units , supplying and laying of copper refrigerant pipes for 3 tr ductable ac units , extra for supply and charging of additional refrigerant gas , providing indoor and outdoor unit mounting bracket system , supplying and laying of 2.5sq.mm 4 core pvc insulated copper conductor cable , supplying and laying of 2.5sq.mm 5 core pvc insulated copper conductor cable , supplying and installing 300 mm width x 50 mm depth x 1.6 mm thickness perforated m.s. cable trays , providing and laying of 40mm dia fire retardant corrosion free medium class u pvc pipe along with accessories , providing and laying of 32mm dia fire retardant corrosion free medium class u pvc pipe along with accessories , providing and laying of 25mm dia fire retardant corrosion free medium class u pvc pipe along with accessories , supply fabrication and installation of 22 swg gi sheet plenum duct complete with all accessories , supply and fixing of rectangular fire retardant canvas duct connector having fabric section vinyl coated woven nylon or polyester blend material , supplying and fixing of powder coated extruded aluminium supply air grills with fixed front louvers , supply and fixing 6 to 32amps 1 pole mcb 10ka c curve with connections and testing , supply and fixing 63amps 4 pole mcb 10ka c curve with connections and testing , supply and fixing 100amps 4 pole isolator with connections and testing , supply and fixing blanker plates for mcbdbs , supply and fixing 4 pole metal enclosure box for fixing mcb and isolators , supply and fixing 20mmx12mm size heavy duty pvc cassing and capping , supply and fixing 25mmx16mm size heavy duty pvc cassing and capping , supply and fixing 4 way vertivcal tpn mcbdb with metal door with 100a copper bus bar , supply and fixing cable end box suitable for 4 way vertivcal tpn mcbdb with metal door with minor civil works , supply of 4 core 25sqmm lt xlpe insulated pvc sheathed aluminium conductor armoured cable , supply and fixing mv cable ened temination with brass compression gland for 4core 25sqmm al cond armd cable , laying of 4 core 25sqmm lt xlpe insulated pvc sheathed cable on wall surface , laying of 4 core 25sqmm lt xlpe insulated pvc sheathed cable in duct or air