Latest cable jointing Tenders | Government cable jointing Tenders

State Government

CTN :41795403

22 Sep, 2025 20.00 Lacs

Nagpur - Maharashtra

Tender For procurement of 33kv & 11kv cable jointing kits for various cable sizes for nagpur urban circle

CTN :40812741

15 Sep, 2025 NA

Cuddalore - Tamil Nadu

Tender For bid to ras supply of heat shrinkable anti tracking tube for 11 kv epr cable jointing work of size: 35/12 mm , medium walled h. v. anti- tracking heat shrinkable tubes of size: (35-40) /(12-16) mm , medium walled high voltage anti-tracking heat shrinkable tubes of size: (58-63) /(18-29) mm , heat shrinkable stress control sleeves of size 30/15 mm suitable for 11kv

Central Government/Public Sector

CTN :41770500

30 Sep, 2025 1.57 Crore

Amritsar - Punjab

Tender For supply of periodical repair maintenance and operation of power supply , operation and maintenance of roof top solar plant , repair of earth pits , supply of transformer oil , dehydration and filtration of transformer oil , provision of silica gel , service charges for locating pin pointing of fault in lt cable , service charges for locating pin pointing of fault in ht cable , supplying and making indoor cable end termination 35 sq mm , supplying and making indoor cable end termination 185 sq mm , supplying and making straight through cable jointing 35 sq mm , supplying and making straight through cable jointing 185 sq mm , servicing checking and testing of lt circuit breakers upto 1600 amps , servicing checking and testing of lt circuit breakers above 1600 amps and upto 3200 amps , servicing checking and testing of 11 kv ht circuit breakers upto 800 amps biecco lawrie make , servicing checking and testing of 11 kv ht circuit breakers 630 amp rmu with sf6 insulating medium , supply of the following spares jaw contacts 1 set upto 1600 a , supply of the following spares pole assembly include 1 fixed contact upto 1600a , supply of the following spares jaw contacts 1 set above 1600 a and upto 3200 a , supply of the following spares pole assembly above 1600 amps and upto 3200 amps , inspection servicing testing and calibration of idmt relays , inspection servicing testing and calibration of idmt relay , inspection servicing testing and calibration of protection relays , inspection servicing testing and calibration of digital protection relays , transformer oil leakage repair of lv side of transformer upto 500 kva , transformer oil leakage repair of lv side of transformer above 500 kva upto 2000 kva , servicing checking and testing of the following 250 kva servo for mssr , complete item of cpwd schedule of rates electrical 2022 ) /bid number : gem/2025/b/6662944 * /dated: 09-09-2025 & & / bid document 1 / 23

CTN :41765132

03 Oct, 2025 NA

Varanasi - Uttar Pradesh

Tender For corrigendum : supply of cable jointing kit.

CTN :41745599

29 Sep, 2025 22.90 Lacs

Ramgarh - Jharkhand

Tender For supply of cable jointing kit for topa and karma ocp e e - pole mounting jointing kit , cable jointing kit , end termination cable jointing kit , push on pole mounting , termination cable jointing , straight through cable jointing kit , straight through cable , jointing kit

CTN :41736934

18 Sep, 2025 3.89 Lacs

Ramgarh - Jharkhand

Tender For day to day supply and making of outdoor cable end termination and straight through cable jointing with heat shrinkable jointing kit completed with all accessories including lugs, ferrules suitable for following size of 3 core xlpe aluminum conductor

Central Government/Public Sector

CTN :41754386

30 Sep, 2025 39.52 Lacs

Ernakulam - Kerala

Tender For tender for supply of replacement of old feeder pillars at various locations in willingdon island : : - sitc feeder pillar dld junction fp1and2 , sitc feeder pillar ig road opp testingrepairshop , sitc feeder pillar cfs near compound wall , sitc feeder pillar ewharf behind duty free shop , sitc feeder pillar mwharf q3 front side , sitc feeder pillartourist jetty , sitc feeder pillarshore supply no1 , sitc feeder pillar shore supply no2 , removal of existing 250 a feeder pillar , removal of existing 400 a feeder pillar , sitc of housing feeder pillar , provide earth with gi earth pipe , supply installation of gi strip , sitc of end termination brass cable gland 25 sqmm lt cable , sitc of end termination brass cable gland 50 sqmm lt cable , sitc of end termination brass cable gland 95 sqmm lt cable , sitc of end termination brass cable gland 120 sqmm lt cable , sitc of end termination brass cable gland 150 sqmm lt cable , sitc of end termination brass cable gland 240 sqmm lt cable , sitc of end termination brass cable gland 300 sqmm lt cable , sitc of cable jointing heatshrink kit 50 sqmm lt , sitc of cable jointing heatshrink kit 95 sqmm lt , sitc of cable jointing heatshrink kit 150 sqmm lt , sitc of cable jointing heatshrink kit 240 sqmm lt , sitc of cable jointing heatshrink kit 300 sqmm lt

Central Government/Public Sector

CTN :41734943

27 Sep, 2025 38.54 Lacs

Lucknow - Uttar Pradesh

Tender For provision of lt cable, lt panel and connected items at trg area of 01 assam under ge e/m lucknow - excavation in trenches in soft/loose soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide and getting out complete all as specified and as directed by the engineer-in-charge., returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick using excavated soil complete all as specified and as directed., removing excavated soil n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed., material and labour for dry river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading, levelling & punning complete as specified and directed .note :- punned thickness (18 cm) shall only be considered for payment., m&l for laying of fly ash brick designation 100 kg / sqcm, using old size bricks confirming to is 12894, laid flat with width equal to length of brick, laid dry over electric cable for protection complete all as specified & directed by engr-in-charge., deployment of tools & manpower for boring /drilling (horizontly) manually / mechanically under existing road max 10 m in width) suitable for passing pipe of any descreption of dia 40 to 100 mm complete all as specified and directed by engineer in charge, supply, laying jointing and testing lt ug cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured is 7098 marked, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 120 sq mm 3.5 core, laid in trench / laid under floor or fixed naked with wall / on wall / in ducts / in gi pipes etc. with and includings ms clamps, nuts, bolts, washers complete all as specified and directed. note- excation, earth works,and sand cushioning, protection bricks and pipe shall be measured and paid seprately under given items., all as per item no 07 above but lt under ground cable of size 95 sqmm 3.5 core, all as per item no 07 above but lt under ground cable of size 70 sqmm 3.5 core, all as per item no 07 above but lt under ground cable of size 50 sqmm 3.5 core, all as per item no 07 above but lt under ground cable of size 16 sqmm 4 core, s&f cable jointing kit for 1100 v (earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core 25 to 50 sqmm xlpe armoured aluminium conductor ., s&f cable jointing kit for 1100 v (earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core 70 to 95 sqmm xlpe armoured aluminium conductor, m&l for 80 mm bore mild steel galvanised water tubing, light grade with all fittings and fixed to walls or laid on floors / fixed to poles / or passing under road crossing, for protection of ug cable complete all as specified and directed by engr-in-charge. , m&l for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly and vertically in ground with top edge of the plate not less than 2.25 mtr from gl, connected with galvanised iron strip 32 x 6 mm, all as shown in plate no-3, of ssr, connected to the earthing test point, concrete pit in pcc 1:3:6 type c-2with rcc precast pit cover slab 400 mm x 400 mm x 50 mm with handle for lifting made out of 8 mm dia ms rod, funnel, wiremesh, 50 mm dia light grade gi tubing for protection of gi strip 32 x 6 mm, charcoal and salt in alternate 150 mm thick layers around gi earth plate, including necessary returning filling in & removal all as specified or indicated in ssr part-i, including testing to achieve earth resistance value as per is specification on completion, supply, installing, testing and commissioning factory made, cpri approved, confirming to is-5039, overall powder coated, lt p

State Government

CTN :41703160

10 Sep, 2025 NA

Delhi - Delhi

Tender For p/o miscellaneous electrical consumables under ee(sdw)-i division. - p/o miscellaneous electrical consumables under ee(sdw)-i division by carryout following supply:-630 amp. mccb, 3 pole 50 ka., cable jointing kit straight through with heat shrinkable kit with ferrule for 3 x300sq mm 1.1 kv grade cable., cable jointing kit straight through with heat shrinkable kit with ferrule for 3 x25sq mm 1.1 kv grade cable., cable jointing kit straight through with heat shrinkable kit with ferrule for 3 x50sq mm 1.1 kv grade cable., 20mm dia pvc conduit., 25mm dia pvc conduit., 20mm dia pvc bends., 25mm dia pvc bends.make:- havells / l&t / siemens / other djb approved make. jointing kits:- raychem / 3m / oem. pvc pipes & bends:- setia / champion / rajdhani / oem.

corporations/Associations/Others

CTN :41326578

13 Sep, 2025 NA

Parichha - Uttar Pradesh

Tender For corrigendum : supply of miscellaneous electrical items and panel fans in ptpp, parichha, jhansi (up)-284305. - ht power cable (6.6/11 kv) jointing kit 1 core 800 sqmm, ht power cable jointing kit 3 core 185sqmm, ht end termination kit 185mm2, lt power cable jointing kit 3 core 300sqmm, lt power cable jointing kit 3 core 240sqmm, lt power cable jointing kit 3 core 185sqmm, silica gel blue, switch 5a.250v,make-anchor,havells, socket 5a.250v,make-anchor,havells, switch 15amp, flash type,250v,make-anchor,havells, socket 15a,250v,make-anchor,havells, 3-pin plug top 15amp,250v, make-anchor,havells, 3-pin plug top 5amp,250v, make-anchor,havells, switch board plastic for 5a 1switch+1socket, switch board plastic for 5a 3switch+1socket, fan regulater (switch size) for ceiling fan, make-anchor,havells,bajaj, cable tie (150 mm); (1pckt= 100pc), mcb 3 pole 16 amp c-type, make-abb,schneider,l&t,siemens,havells, mcb 2p, 6a,9ka,c curve, csmbs2c6,make-abb,schneider,l&t,siemens,havells, mcb dp 10a,220v ac, c curve, make-abb,schneider,l&t,siemens,havells, mcb 2p, 16a,9ka,c curve, csmbs2c16,make-abb,schneider,l&t,siemens,havells, mcb 2 pole current rating 32 amp type c, make-abb,schneider,l&t,siemens,havells, mcb 4amp 3p type c 415vac, make-abb,schneider,l&t,siemens,havells, mcb 6amp 3p type c 415vac, make-abb,schneider,l&t,siemens,havells, mcb 3 pole 16 amp 415v c curve, make-abb,schneider,l&t,siemens,havells, mcb, curve c,conforming iec 60898-1, 3 pole,32a,415v, 50hz,cat.sh203m c32, make-abb,schneider,l&t,siemens,havells, mcb 63amp 3p type c 415vac, make-abb,schneider,l&t,siemens,havells, panel fan- 230 vacsize/dimensions: 119x119x38 mm, mounting hole to hole:104.8 mmhousing: diecast aluminum, impeller: thermoplastic pbt (ul94v-o plastic)air flow: 90 cfm or better @ 2700 rpm & powe consumption: 25 w or betterpower supply: 220 +/- 10% vac , 50 hzinsulation resistance: >100m ohm between leadwire and frame (500vdc)operating temperature: 65 degree c or betterservice life : 60000 hours or betteroperating mode: continuous operationelectrical protection class: iiiapprovals/certifications: din en 62368, ul507, csa c22.2 nr. 113, eac, ce, ukca, panel fan- 230 vacsize/dimensions: 172x150x51 mm, mounting hole to hole:162.0 mmhousing: diecast aluminum, impeller: thermoplastic pbt (ul94v-o plastic)air flow: 330 cfm or better @ 3300 rpm & power consumption: 50 w or betterinsulation resistance: >100m ohm between leadwire and frame (500vdc)power supply: 220 +/- 10% vac , 50 hzoperating temperature: 65 degree c or betterservice life : 60000 hours or betteroperating mode: continuous operationelectrical protection class: iiiapprovals/certifications: din en 62368, ul507, csa c22.2 nr. 113, eac, ce, ukca

Cable Jointing Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

corporations/Associations/Others