Latest cable joints Tenders | Government cable joints Tenders

Central Government/Public Sector

CTN :43034824

24 Dec, 2025 NA

Medak - Telangana

Tender For supply of bare copper wires (annealed) in pvc bobbin spools gauge 16 swg , bare copper wires (annealed) in pvc bobbin spools gauge 18 swg , bare annealed copper wire in pvc bobbin spools 99. 9% purity 20 gauge , aluminium wire in half hard gauge 20 swg , aluminium wire in halfhand gauge 16 swg

CTN :43054630

15 Dec, 2025 NA

Solan - Himachal Pradesh

Tender For supply of xlpe cables for working voltages from 3. 3 kv up to and including 33 kv as per is 7098 (part 2) (q3) , cable termination kit (v2) (q3) , excavation in trenches not exceeding 1 point 5 meter wide and not exceeding 1 point 5 meter in deep getting out in hard dense soil for stay assembly erection of poles complete , returning filling in including spreading levelling watering and well ramming in layers n exc 25cm thick , removing of excavated material n exc 50m and depositing where directed at a level n exc 1 point 5m above the starting point , supply install testing and commissioning of ht 11 kv 3 phase 50 cycles outdoor type totally enclosed metal clad switchgear complete with vcb having rupturing capacity upto 350 mva , supply and fix cable jointing kit for 11 kv straight through cold shrink 3 core x 120 sqmm complete , material and labour for reinforced concrete pipes 150mm dia class np2 laid and jointed complete with collars for cable protection , supply and install synthetic rubber insulated mats 2 pint 5 mm thick for voltage upto 11kv for electrical purpose suitable for electrical shock and safety of sizes 2m x 1m complete , m and l for pcc 1 column 4 column 8 type d2 using 40mm graded stone aggregate in foundation and mass concrete , m and l for pcc 1column 2 column 4 type b1 using 20mm graded stone aggregate in coping and the like including weathering slightly rounded angles , material and labour for chain link ms galvanisd fencing including line wires any mesh size and type to any type of standards rails straining bolts , m and l cutting the existing bituminous road concrete surface 150 mm thick to the required width and depth for laying of cable protection pipe , m and l for replacement of unserviceable double walled corrugated hdpe duct pipe of 110mm outer dia , m and l for providing cable route markers cast iron round shaped disc of 150mm dia 3mm thick embossed with marking ht cable mounted on angle iron , m and l for earthing with galvanised steel earth electrode plate of size 600x600x6mm thick ) /bid number: gem/2025/b/6881369 * /dated: 04-12-2025 & & / bid document1 / 20

CTN :42410229

06 Dec, 2025 NA

Sonitpur - Assam

Tender For bid to ras supply of high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786,high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786,high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786,high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786,high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786,high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786,high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786,high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786,high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786,high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786,high strength deformed steel bars and wires

CTN :43020671

31 Dec, 2025 NA

Delhi - Delhi

Tender For tender for rate contract of orthopedic trauma implants - arthroplasty implants, proximal humerus locking compression plate (philos) 3.5mm, left/right set: 3 to 11 holes on shaft of plate with 9 locking screws 3.5mm (length-all sizes) and 6 cortical screws 3.5mm (length-all sizes), stainless steel., narrow 4.5 mm locking compression plates set: 6 to 14 holes (combihole design) with 4 cortical screws 4.5mm (length- all sizes) and 6 locking screws 4.5mm (length- all sizes), stainless steel., distal humerus anatomical locking plate set 3.5mm left/right (two plates- one medial and one lateral with 6 cortical screws and 8 locking screws, 4 to 8 holes on shaft of plate), stainless steel., extra articular distal humerus locking compression plate 3.5mm left/right set, with 4 to 12 holes on shaft of plate(combihole design), with 4 cortical screw(length- all sizes) and 8 locking screws (length all sizes), stainless steel., interlocking nails for humerus with provision for minimum 3 proximal and 2 distal locking screws (nail diameter 6-8mm, length 22-30mm), proximal radius anatomical locking plate set 2.4mm/2.7 mm, left/right for fixation of radial head and neck, 4 to 6 hole with 4 locking screws and 2 cortical screws, stainless steel., olecranon anatomical locking plate set (hook plate) 3.5mm, left/right, 4 to 8 holes on shaft of plate with 8 locking screws and 4 cortical screws, stainless steel., locking compression plate 3.5mm (combi-hole design) set 5 to 12 hole with 4 cortical screws and 4 locking screws, stainless steel., 1/3rd tubular plate set 3.5mm 4 to 12 hole with 8 cortical screws, stainless steel., 1/3rd tubular locking plate set 3.5mm 4 to 12 hole with 4 cortical and 6 locking screws, stainless steel., distal radius anatomical locking plate set (volar) 2.4mm/3.5mm left/right with 3 to 7 holes on shaft of plate, with 6 locking 2.4mm screws and 2 cortical 3.5mm screws and 4 locking 3.5mm screws, stainless steel., distal radius t locking plate 3.5mm set with 3 to 7 holes on shaft of plate with 6 locking screw and 4 cortical screws, stainless steel., distal radius t non locking plate set 3.5mm set with 3 to 7 hole on shaft of plate with 8 cortical screws, stainless steel., clavicle locking plate set 3.5mm right/left (6-8 holes) with corresponding screws, ss., headless compression screws 2.7mm, self-tapping, cannulated, length 10-40mm,titanium, headless compression screw 3.5mm self-tapping, cannulated, length 10- 50 mm, titanium, headless compression screw 4.5mm self-tapping, cannulated, length 10 60 mm, titanium., 1.5 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head, titanium *, 2.0 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head, titanium *, 2.4 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head, titanium *, radius intramedullary square nail set diameter 2.0mm to 4.0 mm and length 20 to 36mm, stainless steel., ulna intramedullary square nail set, diameter 2.0mm to 4.0 mm and length 20 to 36mm, stainless steel., 3.5mm reconstruction non- locking plate set 4 to 14 hole with 8 cortical screw, stainless steel, 3.5mm reconstruction locking plate set 4 to 12 holes with 4 cortical screw and 6 locking screw, stainless steel., 2.7mm reconstruction non locking plate set, 4 to 14 holes with 8 cortical screws, stainless steel., orthofix external fixator, size- l/m/s/es, ss, dynamic screw measuring 9mm, ilizarov ring fixator set for tibia: one set consisting of 10 half rings (120 mm to 220 mm), plus one 5/8 ring (120mm to 220mm), 10 ring connecting bolts, 12 threaded rods(100 mm to 400mm), eight 1.8mm ilizarov wires(trocar/bayonet tip), six olive wires, 30 slotted bolts (centric/eccentric/schanz screw holding), 120 full nuts, 10 washer, two male and two female posts(one to four holes), four schanz screw 4.5mm/5.0mm, two male hinge and two female hinge. instrumentation to be provided along with the set must

State Government

CTN :43029494

23 Dec, 2025 42.00 Lacs

Junagadh - Gujarat

Tender For supplying and stacking various type of building, road & otherconstruction meterials, at various places of taluka bhesan undertaluka panchayat, bhesan under mgnrega( annual unit rate) - providing and fixing 35 mm thick shutters for doors,windows and clear story windows cluding an odised alluminium butt hinges with necessary screws. (a) indianteak wood (ii) fully glazed., steel hysd, battens 75 mm x 100 mm, binding wires, c.i. cover with frame 300mm x 300mm, cement (53 grade), coarse sand, common burnt clay bricks modular size 20x10x10 cm, crushed stone aggregate for hard quality 6 to 10mm size, crushed stone aggregate for hard quality 10 to 20mm size, crushed stone aggregate for hard quality 20mm size, crushed stone aggregate for hard quality 40mm size, crushed stone aggregate for hard quality 40mm to 63mm size, distemper primer, dry distemper, enamel paint, enamel primer, fine sand, flat back wash basin colour glazed 450 x 300 size, g.i sheet 0.8 mm thick corrugated class-3, g.i. barbed wire, g.i. j or l hooks, galvanised mild steel tube medium grade 32mm dia, gun metal screw down bib tap-15 mm dia, gun metal screw down bib tap-20 mm dia, guard stone, hand broken stone aggregate 25mm size to 90mm size, hand broken stone aggregate 40mm size to 63mm size., hard marrum, p.v.c bib tap 15mm. dia, p.v.c bib tap 20mm. dia, plastic emulsion paint, polished kota stone slab green. 25 mm thick, pre-cast cement concrete tiles, quarry spall., precast rcc jali 100 mm thick, r.c.c heavy duty non-pressure pipe i.s. class np-3 900mm dia., r.c.c heavy duty non-pressure pipe i.s. class np-3 600mm dia., r.c.c heavy duty non-pressure pipe i.s. class np-3 1200mm dia., s.w. gulley trap 150mm x 100 mm size., s.w. guly trap 100 x 100 mm size, stone dust, synthetic enamel paint, terrazo tiles light shade 20 mm thick, urinal flat back, water proofing cement paint, white bela stone, white paint, white vitriousching w.c. sqatting pan (india type), precast concrete blocks (1:3:6) (39 x 20 x 19 cms)

State Government

CTN :43029782

24 Dec, 2025 1.00 Crore

Badwani - Madhya Pradesh

Tender For material supply for forestry work rcc pole and barbed wire etc. - pre stressed reinforced cement concrete fencing pole size 100x100 mm of 2.00 mtr length, galvanized steel barbed wire type b-3 the barbs shall have four points and shall be formed by twisting two point wires each two turns, tightly around one line wire making all together four complete turns line wire 2.5 mm, point wire 2.0 mm distance between two barbs 75mm conforming to is-278-2009

corporations/Associations/Others

CTN :43046989

12 Dec, 2025 NA

Bengaluru - Karnataka

Tender For auction sale of scrapped various types of connectors attached to wires cables,scrapped brass cutting punching wires tubes pipes and rods etc,scrapped aluminium cuttings punchings pieces,scrapped solder pieces and lead dross,scrapped testing measuring equipments panel etc,scrap aluminium bars and tubes,scrapped euipments ac,scrapped aluminium parts powder,scrapped ms cabinets cup boards etc,scrapped mild steel parts such as vents frames,mixed miscelaneous scrap,scrapped ventilator cabinets and related,scrapped all kinds of machines,scrapped pc boards and aluminium clading sheets.,scrapped plastic of all kind,scrapped various kinds of packing wood etc.,wood cut and fallen trees scrapped,scrapped thermal paper rolls printing paper,used oil with containers,scrapped printer cartridges and tonners,milk pouch,scrapped coconut shells

State Government

CTN :43013412

23 Dec, 2025 NA

Vadodara - Gujarat

Tender For purchase of gi wire no.8 & 10 swg & gi stay wires 7/12 for annual requirement of 2026-27.

State Government

CTN :42971249

08 Dec, 2025 97.12 Lacs

Jammu - Jammu And Kashmir

Tender For "upgradation and strenthening of smgs hospital jammu" by way of replacement of old wires fans led fixtures (ward no 14,16,registration counter,trolley area ,corridors of gf & ff ) and lt pannels of nicu abc and picu/ lt cables in smgs hospital jammu.

corporations/Associations/Others

CTN :43016732

05 Dec, 2025 4.82 Lacs

Hyderabad - Telangana

Tender For procurement of materials for electrical maintenance like ab cable, aluminium wires and tube lights etc for 6 nos. divisions in goshamahal circle, ghmc.

Cable Joints Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

corporations/Associations/Others

State Government

State Government

corporations/Associations/Others