Latest cable lug Tenders | Government cable lug Tenders

Central Government/Public Sector

CTN :45737596

28 Jul, 2026 NA

Chittaranjan - West Bengal

Tender For supply of set of cable lug for loco for wag-9 as per as per specn. clw/es/3/0130/o (set details as per category book attached in doc. tab) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45728348

01 Jul, 2026 NA

Ludhiana - Punjab

Tender For supply of contactors ac-3 pole 150amps emd part no.40034361&dlw part no.18140051 [warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45486962

06 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For corrigendum : supply of set of panels to edts-355, rev-1, amd-1 to 6 (amendment-5 not applicable) without pump circuit switch gears i.e. mpcb & contactors mentioned at s.no. 36, 43 & 44 of bom of annexure-a (not required in the hv panel) for regular lhb nonac coaches. note: 1.low voltage panel shall be supplied as per rcf drg.no. cc-72445 alt-a orlatest and additional requirement, top & bottom cable entry holes & earthing lugs shall be provided as per icf drg.no icf/sk3-7-2-082 alt-nil or latest. 2.drg.no.ls71103 alt-a anx-1&2 shall be followed for door stopper arrangement and stiffner in hv panel. 3.drg.no.sked-646 icf anx-2 shall be followed for hv panel lh & rh side holes, wsp mounting holes & provision of poly-carbonate sheet. 4.the rbc cum ebc mcb's and its indication#s shall be provided in the hv & lv panels as per rdso modification sheet no. rdso/pe/ms/ac/0094-2024 (rev 0) and rdso/pe/ms/ac/0095-2024 (rev 0). 5.packing instruction: pi-115 ver 3.0. [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45723624

02 Jul, 2026 6.00 Lacs

Salem - Tamil Nadu

Tender For supply delivery and fixing of motor and accessories at ward-1 selliyampalayam oht in narasingapuram municipality - supply and delivery of kirloskar make 15hp/11kw/2900rpm three phase/415v/50hz/ac/tefc horizontal centrifugal monoblock pump impeller-mechanical seal (head-20mtr,flow rate-2154lpm) size:100x100mm (local quotation) 15hp horizontal centrifugal monoblock pump, labour charges for erection of horizontal shaft, centrifugal pumpset (coupled/monoblock) in bore well/open well including fixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves,pressure gauges upto the exterior wall of pump room and erection of panel board consisting of tpic switches starter, voltmeter, ammeter, capacitor single phasing preventor and laying and jointing the cables and twinearthing as per ie rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by eb authorities., three phase panel board star- delta with two level guard and auto start supply and delivery of star-delta starter confirming to is 13947, iec60947-1 and as amended thereafter with suitable kw rating for operation in ac/ three phase/50hz (+/- 5%) and 415v (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., ct operated ammeter (65 mm dia) with suppressed scale,voltmeter (65mm dia),voltmeter selector switch,miniature circuit breaker, thermal overload relay, air break contactors suitable for next standard higher kw rating, single phasing preventor, dry running preventor and on/off push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capa citor is to be taken separately). three phase panel board for 15hp, supply,delivery and fixing of the following materials are listed below etc..,as directed by the departmental ofiicers.for service4 core 16sq.mm pvc copper ug cable, for motor3 core 6sq.mm pvc insulated and sheathed flat type copper cable, 150mm di pipe, 100mm gi pipe , 100mm gi flange set, rubber sheet for flange set, ms bolt and nut20mm dia and above x 90mm to120mm length fully threaded bolts andwith nuts 2 nos. , manhole cover 60 x 60cm (heavy duty) with frame, supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary ms flange of table e , gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the departmental officers. 150mm sluice valve, 100amps 4pole mcb, 100amps porcelain fuse unit (500v), 32mm pipe

Central Government/Public Sector

CTN :45719686

13 Jul, 2026 44.90 Lacs

Cachar - Assam

Tender For repair/ maint of lt ug cables and its connected items of masimpur mil stn incl army est at khumbigram under masimpur mil stn - e & m division items, dismantling of old unserviceable/damaged acsr or aac conductors of any size , jumper from overhead line & stacking serviceable & non serviceable material separately complete all as specified and directed., dismantling of old unserviceable/damaged stay assembly embedded in concrete including demolition of pcc and removing unserviceable meterials from site of work complete all as specified and directed., dismantling of cross-arms of ms channel or angle of any sections complete all as specified and directed., dismantling of insulators of any size/type complete all as specified and directed., dismantling earth wire or copper conductor/ cradles/stay /service feeder or distribution span complete all as specified and directed, excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable/poles and getting out in soft/loose soil complete all as specified and directed., returning, filling in trenches with soil obtained from excavation including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed., removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all all as specified and as directed., supply and laying burnt bricks of sub-class b of size 230mm x 115mm x 75mm laid in trenches for cable protection complete all as specified and as directed, supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. note: thickness of sand cushioning after punning down will be measured and paid separately., m&l for cutting existing road / pcc drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface with pcc 1:3:6 type ci using 20mm graded aggregates complete all as specified, taking down or out existing cable of sizes 10 sqmm to 70 sqmm 2/3.5/4 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, taking down or out existing cable of sizes 95 sqmm to 300 sqmm 3.5 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :-(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 10 to 70 sqmm 2/3.5/4 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc complete all as directed and specified. note :- lugs and glands will be measured and paid separately., relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 95 to 300 sqmm 3.5 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc compl

State Government

CTN :45250161

14 Jul, 2026 NA

Multi City - Telangana

Tender For corrigendum : tggenco - nshes - supply of different ranges of contactors, mcbs, mccbs, relays, add on blocks etc., at nshes, nagarjuna sagar.

CTN :45485708

02 Jul, 2026 NA

Goa - Goa

Tender For bid to ras corrigendum : supply of electrical cable lugs (q3) , metal alloy casting water tap with aerator (v2) (q3) , pvc insulated unsheathed cable with flexible conductor isi marked to is 694 (q2) , non modular piano type domestic electrical switches isi marked to is 3854 (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , plywood 8ft intu 4 ft intu 6 mm , plywood 8ft intu 4 ft intu 12 mm , plywood 8ft intu 4 ft intu 9 mm , plywood 7 ft intu 3 ft intu 12 mm , plywood 8ft intu 4 ft intu 18 mm , prelaminated particle board 8 ft intu 4 ft intu 18 mm , preforated particle board 600 mm intu 600 mm intu 12 mm , cushion sofa u foam 530 into 560 mm 40 densit intu 100 mm , cushion sofa u foam 40 densit 540 into 570 mm intu 100 mm , cushion sofa u foam 100 mm thick 40 densit size 21 inch into 22 inch , cushion sofa u foam 32 densit 36 inch intu 72 inch intu 2 inch thick , cushion sofa u foam 32 densit 36 inch intu 72 inch intu 3 inch thick , cushion sofa u foam 40 densit 36 inch intu 72 inch intu 4 inch thick , cushion sofa u foam 32 densit 36 inch intu 72 inch intu 1 inch thick , cover for cushion of sofa stiched alongwith zip facility 21 inch 22 inch , false ceiling board 600mm intu 600 mm intu 4 mm thick , pvc seat for chair varanda , pvc back for chair varanda , 3 layer pvc water tank 1000 ltr , 3 layer pvc water tank 500 ltr , search light 200 watt motorised variable speed operating 230v 50 hz ac beam distence 600 m rotation 350 degree in horizentaly 90 degree in vertically control by remote , wpc board white 8 ft intu 4 ft intu 18 mm , wpc board white 8 ft intu 4 ft intu 12 mm , wpc board white 8 ft intu 4 ft intu 06 mm , pvc board 18 mm bothside laminated , pvc board 12 mm bothside laminated , pvc sheet 4 mm one side laminated , pvc plain sheet 4 mm thick

CTN :45731608

06 Jul, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of cable lug 1.5-2.57 m5 as per specn. clw specification no. clw/es/3/0130/o to pl no. 29616426 [ warranty period: 30 months after the date of delivery ] ]

CTN :45635330

06 Jul, 2026 NA

Multi City - Andhra Pradesh

Tender For corrigendum : supply of tc make power contactors and coils of stage-iii, dr. nttps-reg

CTN :45255749

08 Jul, 2026 NA

Bokaro - Jharkhand

Tender For corrigendum : tender for supply of hea igniter system -hea igniter exciter box , hea igniter cable assembly , hea igniter retractor assembly , hea igniter flexible spark rod assembly , hea igniter spark rod tip , hea igniter guide pipe assembly , local panel , control panel , common manual isolation valve instrument air , air set and air manual isolation valve instrument air with copper tube and fitting from burner front , cooling air one and half inch hard rubber high temperature hose 1500 mm with end clamp , erection materials mounting hardware and other supporting materials cables glands cable lugs

Cable Lug Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

State Government