Latest cable management system Tenders | Government cable management system Tenders

Central Government/Public Sector

CTN :45713835

18 Jul, 2026 30.00 Lacs

Mumbai - Maharashtra

Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door lt bus bar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium bus bar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old bus bar panel all as specified and directed by engr-in charge.notes:-(a) aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc

Central Government / Public Sector

CTN :45737363

21 Jul, 2026 NA

Secunderabad - Telangana

Tender For supply, installation and commissioning of pre-wired modular workstation consisting of a single control office customized to equip two sads and two daws systems arranged and installed on a t-shaped modular workstation with integrated cable management systems as per specifications. specifications of modular workstation: 1) the workstation shall each be of 5 feet (l) x5 feet (w) the combined size: 10 feet (l) x 5 feet (w) - 1set, made of 25 mm nfc wood and 1 mm acrylic laminate. 2) the sads displays shall be installed such that the bottom edge of the display is at a height of 5' (approximate) from the floor. these shall be installed preferably along the longer edge of the t and facing the operators, 3) the daws system shall be installed such that it is possible to be used sitting at the workstation. 4) all interconnecting wiring for lan, power supply and telephones shall be done inside the cable management system (powder coated aluminium interlocking extrusions) and adequate ports shall be provided on the work surface. communication accessories: i) lan rj45: 4 nos ii)telephone, rj11 : 4 nos iii) power supply, 5 amp sockets: 6 nos 5) all wires shall be brought out to interface boxes one for power supply and another for the communications cables. these boxes shall be designed to accept connections from the control room circuits. note: design, supply, fitment, installation, testing and commissioning shall have to done by the firm confirming to the pre-wired modular t- shaped workstation standards. material shall confirm to hpl/nfc engineered wood (25mm thickness) as per epd-ies-0012055:002 (s-p- 12055) certification. make: godrej interio/tumbi/greeken/moudulartek or its equivalent. [ warranty period: 30 months after the date of delivery ] ]

CTN :45635466

27 Jun, 2026 5.69 Lacs

Mumbai - Maharashtra

Tender For corrigendum : maintenance of electrical installation and fans, repair and maintenance of p/set in cgs colony, kane nagar, mumbai-400037.sub head: cleaning and restructuring of existing cable trench in electric meter cabin and strenthening the safety measures as required in navjeevan and navchetna building in sector 5 and 3, kane nagar antop hill, mumbai-37

corporations/Associations/Others

CTN :45681082

01 Jul, 2026 NA

Ankleshwar - Gujarat

Tender For providing and supplying of electricals materials and other materials for nagarpalika area all street lights and related works in the municipality area and all institutions, gardens, etc. owned by the municipality; electric; goods and other goods etc. annual work for purchase as well as repair and maintenance of all high mast towers of 4- meter height, 12-meter height and 16-meter height operated by ankleshwar municipality etc. and supply of man power as per nagarpalika requirement at annual work for the year 2026-27 (date 01/08/2026 to 31/07/2027) (12 months periods) of ankleshwar nagarpalika - porcelain fuse base with top size-16a, porcelain fuse base with top size-32a, porcelain fuse base with top size-63a, porcelain fuse base with top size-100a, porcelain fuse base with top size-200a, hrc fuses knife edge links type hn for 415v, 50hz. , size size 00 63 amp. rating. suit. for hb type fuse base, hrc fuses knife edge links type hn for 415v, 50hz. size size 00 100 amp. rating hb type fuse base, hrc fuses knife edge links type hn for 415v, 50hz. size size 0 200 amp. rating hb type fuse base, hrc fuses knife edge links type hn for 415v, 50hz. size size 0 300 amp. rating hb type fuse base, hrc fuses cylindrical fuse links type hf for 415v, 50hz. make l&t.size 6 amp. rating, fuse bases suitable for din type hrc fuse links. size 00 type hc for hn fuses 2a to 63a, fuse bases suitable for din type hrc fuse links. size 00 type hc for hn fuses 100a, fuse bases suitable for din type hrc fuse links. size 0 type hc for hn fuses 200a, fuse bases suitable for din type hrc fuse links. size 0 type hc for hn fuses 300a, tpn switch lnt make - 63 amp, tpn switch lnt make - 100 amp, tpn switch lnt make - 200 amp, tpn switch lnt make - 300 amp, insulation taperoll, waterproof tape, single pole mcb switchsize-16a, single pole mcb switchsize-25a, single pole mcb switchsize-32a, double pole mcb switchsize-16a, double pole mcb switchsize-25a, double pole mcb switchsize-32a, double pole mcb switchsize-63a, three pole mcb switchsize-32a, three pole mcb switchsize-63a, four pole mcb switchsize-32a, four pole mcb switchsize-63a, four pole isolator switchsize-100a, four pole isolator switchsize-200a, four pole three phase (440v, ac) elcb switch size-32a, four pole three phase (440v, ac) elcb switch size-63a, four pole three phase (440v, ac) elcb switch size-100a, double pole three phase (440v, ac) elcb switch size-32a - 30ma, double pole three phase (440v, ac) elcb switch size-63a 30ma, double pole three phase (440v, ac) elcb switch size-100a 30ma, digital multimeter of reputed make, single pole mcb gang box, double pole mcb gang box, three pole mcb gang box, four pole mcb gang box, 32 amps. single pole mccb socket, 32 amps. single pole mccb top., 63 amps. 3 phase 4 poles mccb, 100 amps. 3 phase 4 poles mccb

corporations/Associations/Others

CTN :45653665

30 Jun, 2026 NA

Jodhpur - Rajasthan

Tender For auction sale of tvm meter scrap (lt) static (e-waste),tvm meter scrap (ht) static (e-waste),11 kv ctpt set scrap (assorted ratio),11 kv pt scrap (a/s),metering instrument scrap,rubber tyre scrap assorted size,rubber tyre scrap 900-20,rubber tyre scrap 750-16,rubber tyre scrap 600/16 (lcv),rubber tyre scrap 165/65 (jeep),fork lifter tyre a/size,vehicle battery 12 v u/s scrap (pcb applicable),ups battery scrap (pcb applicable),computer monitor scrap (e-waste),cpu scrap (e-waste),type writter scrap (e-waste),scrap modem (computer networking),dot matrix printer scrap (e-waste),fax machine scrap,photo copy machine (scrap),electric motor 1 hp scrap,meter testing bench (three phase),meter testing bench (energy meter repair),scrap rotary

Central Government/Public Sector

CTN :45304113

25 Jun, 2026 25.00 Lacs

Mhow - Madhya Pradesh

Tender For corrigendum : repair maint of old unsv meter panel meter box sub main wiring electric distribution board mccb mcb and other connected items under ge mis mhow

CTN :45618111

10 Jul, 2026 NA

Thiruvananthapuram - Kerala

Tender For supply of supply of 1.0tr high wall mounted inverter split ac , supply of 1.5tr high wall mounted inverter split ac , supply of 2.0tr high wall mounted inverter split ac , installation testing and commissioning of above inverter split ac units , supply and laying of refrigerant piping kit , supply and laying of drain piping , covering of refrigerant piping , supply and laying of power cable , construction of brick or masonry pedestal where ever required including plastering , supply and laying of upvc cable management system

CTN :45592966

27 Jun, 2026 NA

Sonitpur - Assam

Tender For supply of monkey plier large taparia , monkey plier small taparia , adjustable spanner large stanley , adjustable spanner small stanley , hammer large stanley , hammer small stanley , stanley socket set big , torque wrench 250 nm taparia , torque wrench 500 nm taparia , stanley t socket t spanner set 6 mm to 15 mm , feeler gauge stanley , star torque socket set stanley or taparia , clamp meter fluke ac or dc 1000 amp , temperature gauge with meter sigma digital , reflector jacket , greese gun 10 kg , hand greese gun , fuel rotary repair kit , heavy vehicle wheel nut removing machine , big funnel , dip stick 210 litre , creeper b vehicle , spanner ring 6 by 7 to 30 by 32 stanley or taparia , spanner open 6 by 7 to 30 by 32 stanley or taparia , oil filter spanner eero strap , cordless impact wrench bosch or electric screw driver * /bid number : gem/2026/b/7677159 + /dated: 17-06-2026 ' ' / bid document 1 / 20

CTN :45566080

06 Jul, 2026 NA

Bathinda - Punjab

Tender For tender for supply of enerators transformer with electric line at 7 bn ndrf bathinda - repairing and cleaning of radiator fins as per direction in charge , providing and replacement of lub oil filter , providing and replacement of v-belt , providing and replacement of oil seal , providing and replacement of lubricant m oil 20w40 , providing and replacement of air filter , providing and replacement of coolant , providing and replacement of fuel filter , m oil 15w 40 , lube oil filter , diesel filter , air filter element , fuel pipe nosel to tank , fuel pipe filter to fip , avr kirloskar green , service charges for repair of dg sets , providing of oil for top up and filtration of transformer oil ic cleaning of tank as per direction of engineer in charge , providing and fixing of contactor mx 25 , providing and fixing of 3 phase single pole add on block , providing and fixing of 200 amp mccb fp , providing and fixing of 100 amp mccb fp , providing and fixing of 63 amp mcb fp , providing and fixing of 14 23 amp thermal overload relay , providing and fixing of voltmeter meter , providing and fixing of ampere meter , providing and fixing of led indicator , providing and fixing of thimble lugs for cable joint

CTN :45535322

14 Jul, 2026 11.50 Crore

Paradip - Odisha

Tender For design, engineering, supply, installation, testing and commissioning of cable management system for the shore to ship power supply facility at coal berth i and coal berth ii of paradip port.

Cable Management System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector