Get complete information related to latest Cable Terminal Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Cable Terminal Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Cable Terminal Tenders.
Tender For supply of cableterminal for 225 sq mm cable type 4 as per clw drg.no. clw/es/sk-1/s-25/h dated 30.10.97.dia 16 mm. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For supply of electric point operating machine irs type 220 mm stroke, high thrust, [ac immunity 160 v ac] rotary locking type, non-trailable to operate on 110 v dc, complete with lock & detector slide, cableterminal box and clamp lock & ground connection as per specification no. irs:s 24/2025rev-3.0 and assembly drg. no. rdso:s 11000 and rdso: s-3395 and for motor irs: s-37/82 amdt. -3 with external clamp point lock 60 kgs, tws, as per drg. no. rdso: s-3454 and with insulation sets and nuts, bolts [suitable for 220 mm throw irs point machine] using 60 kg rail. additional four numbers of felt pad along with felt cover assembly, and five numbers of grease nipples to be supplied along with each point machine as spare for replacements of these accessories due to being defective during operation forday-to-day maintenance of the point machine. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 0 %age , item category : normal , total po value variation permitted: max 8 lacs ] [ rate of supply 80 units per month , commencement time allowed -2 month ]
Tender For supply of d cfa re 47 obstetrical elbow length gloves size7 dot 5 , d cfa re 47 euroband pettiband 6 75mm , d cfa re 47 euroband pettiband 12 50mm , d cfa re 47 tube endotrachel with cuff size3 , d cfa re 47 tracheatube introducer boigie 5fr , d cfa re 47 bipolar cautry tip accessory with laureate , d cfa re 47 silicon gel insole medium , d cfa re 47 silicon gel insole large , d cfa re 47 functional humerus support splint medium , d cfa re 47 functional humerus support splint large , d cfa re 47 skin traction kit including elastic traction belt with adjustable velcro straps vinyl sand water bag traction cord , d cfa re 47 disposable hair trimmer blades for surgical preparation one handset with charger to be given for use with every 100 blades , d cfa re 47 cast shoe medium l xl , d cfa re 47 surgical cling film roll sterile 4 dot 5 m 10 variation in size acceptable , d cfa re 47 sterile disposable suction tube with removable cannula , d cfa re 47 kit for aso titre , d cfa re 47 closed suction post op drain spiral slot with tubings in sterile pack consisting of bellow unit connecting tube with clamp and y connector curved trocar , d cfa re 47 disposable tourniquet velcro type * /bid number : gem/2026/b/7603730 + /dated: 30-05-2026 ' ' / bid document 1 / 21
Tender For corrigendum : supply of fuel filter , oil filter , hyd filter , steering filter , jack cyl seal , hyd mtr , track chain seal , his mtr cable , terminal , mud filter , air filter , painting gun with air line , fan belt , bty post lead , feed pump , lifting pump , accelerator cable , break bulb , jcb cabin fan , air filter , service kit mpt , mpt staring ignition switch , heavy duty socket , lashing belt for jcb and mpt , heavy duty knot opener machine , mini socket set , washing pump with motor 3hp single phase , washing pressure pipe , pressure adopter , and bond , hammering paper , m seal , third tape , grease gun adopter , adjustable , grease gun 8 kg , hose pipe 1 and half inch
Tender For procurement of electrical spares and consumables for 220 kv and 33kv switch yard at khodri power station - 245 kv lightening arrester, discharge current 10ka, frequency 50 hz,pressure relief class 40 ka(rms), long duration discharge class 3, m.c.o.v. 56 kv, make: oblum electrical industries pvt. ltd. /cg power and industrial solution ltd. or eq make as approved by engineer in charge., 145 kv lightening arrester outdoor type ,suitable for 145kv system voltage , discharge current 10ka, freq. 50 hz, high current impulse (4/10 s) 100 ka, rated lightning impulse withstand voltage 1.2/50 s - 650 kvp, polymer based (single phase) make-oblum electrical industries pvt. ltd. /cg power and industrial solution ltd,/ htachi / siemens india ltd or eq make as approved by engineer in charge., auxiliary switch (stack) 5no + 5nc, 220v, dc, make: crompton, hitachi or eq make as approved by engineer in charge for 220kv cgl make sf6 circuit breaker., surge monitor/surge counter with leakage current meter suitable for 220 kv lightening arrestor , make: cg power and industrial solution ltd./ oblum electrical industries pvt. ltd., 33kv ct indoor type , 3 core, 15va each, ratio 650-350/1 a + 1a , class 0.2s(2 core metering) & 5p10 (protection), str: 25ka for 3 sec. make siemens, crompton, hitachi or eq make as approved by engineer in charge., 33kv ct indoor type, 3 core, 15va each, ratio 300-150/1 a + 1a , class 0.2s( 2 core metering) & (5p10 protection, str: 25ka, for 3 sec. make siemens, crompton, hitachi or eq make as approved by engineer in charge, control motor, type c21, 2.6 a, 230v ac/dc, o/p 0.3kw, sr. no: 042-901, m/y 03/08, 750/ min. make: kpt shirol or eq make as approved by engineer in charge for 33kv cgl make indoor type sf6 circuit breaker., auxiliary switch 7no+6nc (stack), 250 volt dc, make: crompton, hitachi or eq make as approved by engineer in charge for 33kv cgl make indoor type sf6 circuit breaker., auxiliary switch 8no+ 8nc, 220v, dc, (motor drive ). make: abb/ hitachi or eq make as approved by engineer in charge for 245 kv, abb make isolator., 220 v, dc, close or trip-1 coil ( part no. exin - 400834 - r9)make: abb/hitachi or eq make as approved by engineer in charge for 145kv, abb make sf6 breaker., rectifier 15 a, 220 v, ac (part no. 1hyn-450040p1 ) make: abb/ hitachi or eq make as approved by engineer in chargefor 245kv, abb make isolator, mcb (2 pole,3a, 220v, dc ), over current earth fault relay, mc61a-nx, cat no : mc61anx2200, make: l&t electrical & automation, or eq make as approved by engineer in charge for 33kv sf6 braeker., 33kv busbar support insulator (epoxy) . make: universal engg. corporation,star electrical engg. works or eq make as approved by engineer in charge.(as per sample), epoxy bushing/ fixed contact of "r","y" &"b" phase bottom side for 33kv cgl make panel (as per sample), epoxy bushing/ fixed contact "r","y" &"b" phase top side for 33kv cgl make panel (as per sample), ratech wheel of 33kv sf6 breaker, cgl make, flexible contact of 33kv sf6 breaker finger, cgl make (as per sample), silica gel blue crystal in mesh size of 15 mm to 35 mm duly packed in poly lined moisture proof m s drums/carton, heat shrinkable cableterminal kit for 3- 400mm ,33 kv xlpe cable for outdoor application (make 3m/raychem/ densons)., heat shrinkable cableterminal kit for 3- 400mm ,33 kv xlpe cable for indoor application (make 3m/raychem/ densons)., heat shrinkable cableterminal kit for 3- 185 mm 33 kv xlpe cable for indoor application (make 3m/raychem/ densons)., heat shrinkable cableterminal kit for 3- , 185 mm 33 kv xlpe cable for outdoor application (make 3m/raychem/ densons)., p g clamp deer/panther for 220 kv conductor, p g tclamp deer/ zebra, for 220 kv conductor, p g clamp deer/ trantulla for 220 kv conductor, p g clamp tarantula/ trantulla for 220 kv conductor, p g clamp deer/deer for 220 kv conductor, p g clamp made of aluminum-alloy suitable for zebra to trantulla conductor with 4 nos bolt - n
Tender For corrigendum : procurement of electrical material for maintenance and repairing of 66/11kv and 220/66kv substation of dnhddpcl. - supplying bolted connections (bs type) hrc fuse link capable to withstand 80ka, 415 v confirms to i.s. 13703 for following current capacity. make ftc/l&t/havells(i) hrc fuse link -2 amp, (ii) hrc fuse link -4 amp, (iii) hrc fuse link -6 amp, (iv) hrc fuse link -10 amp, (v) hrc fuse link -20 amp, supplying bolted connections (bs type) hrc fuse base suitable for 2 amp. to 20 amp. 80 ka, 415 v hrc bolted fuse link. as per is/iec 60269 part-ii, supplying of led indoor fittings with leds of wattage 0.2 watt to 0.5 watt assembled on single mcpcb, with housing used as a heat sink shall be made of thick sheet steel conforming to is: 513, volt 160v to 270v, (a) tube light with integral driver 20 watts, 4 feet make: philips / bajaj / crompton, supplying of approved make single phase industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having following [a] 305 mm dia 900 rpm make: bajaj/hevells/ crompton /almonard, supplying of approved make ceiling fan with double ball bearing isi mark with condenser a.c. 23ov. 50 c/s.1200 mm. sweepmake: bajaj/hevells/crompton /usha/orient , supplying of approved make pedestal fan a.c. 230v. 50 cy/s. 400 mm sweep oscillating, type and adjustable, height complete with guard regulator, & standard lead flexible wires and plug top. make: bajaj/hevells/ crompton /usha/orient, supply of tnc switch with lock for 66/11 kv panel, supply of petroleum jelly for sub-station equipments protection (1 kg pack), indicating lamp led type, mount hole-22 mm, 110 v dc with back panel lock nut fitting.red- 100 nosyellow-100 nosgreen-100 nosblue-100 noswhite-100 nos, providing crimping type cableterminals (lugs) conforming to is of following types and sizes. (aluminium tubular terminals long barrel)) .240 sq. mm, providing crimping type cableterminals (lugs) conforming to is of following types and sizes. (aluminium tubular terminals long barrel)) .300 sq. mm, supply of telescopic earth / discharge rod up to and included 66 kv, 72.5 kv tested manufacture in fully automatic pultrusion plant having strong electrical & mechanical strength. as per specification.a. total section 4 sectionb. assembled height 18 feetmake :- biemco or equivalent, supply of shroud for 11 kv panel, 12 kv , jyoti make (as per approved sample), supply of jaw contact female, 11 kv, 1600 amp. jyoti make( as per approved sample), supply of tripping coil, 110 v dc for 11 kv panel (suitable for abb & jyoti make panel), supply of closing coil, 110 v dc for 11 kv panel (suitable for abb & jyoti make panel), supply of natural rubber latex seamless hand gloves for electrical purpose tested as per is 4770-1991 having test potential of 33000 volts and maximum working potential 11000 volts of size 380 mm crystal brand., supply of rechargeable torch with led bulb make: eveready/hevells/ wipro
Tender For auction sale of depot miscellaneous scrap - 98325061 scrap released stater frame of traction motor (02 nos) without rotors, and armature coil (02 nos) with or without copper cable,terminals and other ferrous or non-ferrous accessories, off sorts and sizes, broken and damaged, with or without rust, dust, oil, paint, adhesives, wet and grease on as it is basis.unsuitable to railway use. image uploaded .loading by purchaser.note: bidders are advised to see the lot physically. delivery will be made as is where is basis. custodian: dms/nf/mx.
Tender For tender for supply of power supply cable-terminal , power supply cable riu , data cable -terminal , data cable - client , headset , ac supply cable , data cable - riu , power supply cable data cable - ethernet switch , handset , ethernet switch , ac-dc power supply unit
Tender For tender for supply of fixing self regulating heat tape cable insulation and accessories in ppr pipe - providing and fixing self regulating heat tape resistance heating cable suitable to protect freezing of water in pipelines having rated output of 35 w per meter at 220 v ac supply the heating cable shall have capabibility to automatically adjust its heat output based on surrounding temperature conditions to prevent freezing and overheating the cable should be suitable for continuous operation in outdoor in adverse climatic conditions flexible for installation around pipelines joints and valves and compatible with temperature controller systems , providing m20 3 pin connector suitable for making secure electrical joints between self regulating heat cableterminals designed for reliable power and signal continuity the connector should be operable for operation at rated 220 v ac supply and compatible with heating cables of specified capacity must l ensure safe and firm termination with robust insulation to prevent moisture ingress short circuits and electrical leakage the connector shall be made up from high-quality weather resistant materials suitable for continuous outdoor operation under adverse environmental conditions it should be ease in installation with a compact and durable design for use in pipeline joints terminations and interconnections the connector should be compatible with temperature control systems and associated accessories ensuring long term performance safety and protection against overheating corrosion and mechanical stress , providing temperature differential controller with auto and manual operation housed in a robust ip65 rated enclosure suitable for controlling heat tracing systems to prevent freezing of water in pipelines and utilities the controller should be capable to automatically switch the heat tape on off based on preset temperature differentials ensuring optimal performance and energy efficiency the controller should have in built safety features such as overrun protection and burn out protection to safeguard the heating cable and associated equipment from damage the enclosure shall be weatherproof and suitable for outdoor installation offering protection against dust and water ingress and ensuring reliable long term operation under harsh environmental conditions , providing pt100 temperature sensors with 10 metre cable suitable for accurate temperature measurement and control in heat tracing and pipeline monitoring applications the sensors should be made up of platinum resistance type pt100 ensuring high precision stability and reliability over a wide temperature range the wire with sensor should have high quality insulation suitable for reliable signal transmission and compatible with temperature controllers and monitoring systems the cable shall be durable flexible and suitable for installation in outdoor under extreame weather conditions in high altitude area , providing 3 core 1.5 sq mm pvc insulated and pvc round sheathed multicore flexible cable comprising bright annealed bare copper conductors suitable for heavy duty industrial applications rated for voltage grade up to 1100 volts the cable shall confirm to requirements of is 694 2010 the conductors shall be made of high-conductivity annealed copper ensuring efficient current carrying capacity and minimal losses each core shall be uniformly insulated with high-quality pvc compound and the overall cable shall be protected with a durable pvc outer sheath providing resistance against moisture abrasion and mechanical stresses the cable shall be flexible in nature allowing ease of installation in confined and complex routing conditions it should be suitable for continuous operation in indoor and outdoor adverse environments offering reliable performance electrical safety and long service life