Latest cable trays Tenders | Government cable trays Tenders

Central Government And Public Sector

CTN :45179978

09 Jun, 2026 NA

Kolhapur - Maharashtra

Tender For corrigendum : providing of custom bid for services - sch 1 laying plb pipe duct and associated works by hdd trenchless technology open trench method optical fibre cable pulling blowing and splicing works etc optical fiber cable route for 1 percent improvement works in kolhapur satara solapur ..,custom bid for services - sch 1 laying plb pipe duct and associated works by hdd trenchless technology open trench method optical fibre cable pulling blowing and splicing works etc optical fiber cable route for 1 percent improvement works in kolhapur satara solapur ..,custom bid for services - sch 1 laying plb pipe duct and associated works by hdd trenchless technology open trench method optical fibre cable pulling blowing and splicing works etc optical fiber cable route for 1 percent improvement works in kolhapur satara solapur ..,custom bid for services - sch 1 laying plb pipe duct and associated works by hdd trenchless technology open trench method optical fibre cable pulling blowing and splicing works etc optical fiber cable route for 1 percent improvement works in kolhapur satara solapur ..,custom bid f

Central Government And Public Sector

CTN :44802376

05 Jun, 2026 76.11 Lacs

Jalgaon - Maharashtra

Tender For bid to ras corrigendum : providing of custom bid for services - laying of plb pipe duct and associated works by hdd trenchless technology or open trench method optical fibre cable pulling blowing and splicing works etc under new replacement plan for optical fiber cable route of jalgaon business area of ..

Central Government And Public Sector

CTN :45407910

23 Jun, 2026 NA

Pune - Maharashtra

Tender For providing of custom bid for services - pune laying of plb pipe duct and associated works by hdd trenchless technology or open trench method optical fibre cable pulling blowing and splicing works etc under new replacment and rehabilitation plan for optical fiber cable route of pu..

Central Government And Public Sector

CTN :44823319

05 Jun, 2026 1.49 Crore

Raebareli - Uttar Pradesh

Tender For bid to ras bid to ras corrigendum : tender for supply of aircraft spare parts d d - fuel tank , break cylinder assy , nut nlg , elbow , brake plate , rtv sealant (pack 50ml) , rtv sealant (pack 50ml) , birssen hardner , moleykote insulating compound (pack 100gram) , resin birressen cr132fr (liter) , engine drain valve , rubber damper63x50 , ignition switch , nut , nut , blind rivet , engine shock mount , bolt engine mount , lock washer , o ring fuel tank , o ring fuel tank , oring fuel tank , spark plug , rubber damper 32x40 , hose , hose , hose , filter , hose fuel , potentiometer dual gauge , nlg bolt , fuel flow sensor , support muffler brace , connector3ptab , wheelhubassy , nut hexa slef lock , compression gas , brake lining , rivet brk pad , screw csk , gascolator filter , cotter pin , gasket magneto , fuel tank cap , nut exchaust , reflector , washer , gasket exhaust , placard main , placard tyre pressure , placard , placard pitot static , placard cp , placard , fuel pump make-weldon , inlet duct , valve body , flange , shim alt bracket , bolt , seal push rod , seal push rod , gasket rocker , switch ap trim , washer , camloc , rubber hose interconnecting , pin protection , turn coordinator , canopy bobble tall painted plastic , trim tab painted , hinge for knowckout window clear , safety walk step lh , strobe light green , o ring , kit nut replace mlg dampner , spring mlg , fuel level trans , camloc fastener , hose assy.fuel , clamp exhaust , flap actuator motor , gas spring , rocker switch white , clamp oet138r , resin pack size 1 ltr. , hardener pack size 1 ltr. , egt sensor , coupler exhaust , cable bush , collector power flow , hose fuel , hose fuel , hose fuel lh , hose fuel rh , hose oil rh , hose oil , hose oil , hose fuel , hose press manifold , door handle outside assy. , oil filter , make-champion , gasketing and jointing compound pack 100g

Central Government/Public Sector

CTN :45403430

08 Jun, 2026 NA

Golaghat - Assam

Tender For design, engineering, procurement, fabrication, inspection, testing, transportation, and supply of cable trays as per mr

State Government

CTN :45087727

05 Jun, 2026 NA

Manaparai - Tamil Nadu

Tender For corrigendum : painting of cable trays and its supports in soda recovery plant at tnpl unit - ii, trichy.

corporations/Associations/Others

CTN :45406873

23 Jun, 2026 NA

Nashik - Maharashtra

Tender For supply of 100 pair armored j f telephone cable , 50 pair armored j f telephone cable , 20 pair armored j f telephone cable , 10 pair armored j f telephone cable , 5 pair armored j f telephone cable , krone module , hdpe telephone duct pipe , route indicator for cable , excavation of trench , telephone cable laying and pulling , installation of dp box , cable pair termination of telephone , laying of duct pipe in trench , cable route indicator installation

CTN :45048307

30 Jun, 2026 NA

Tarapur - Maharashtra

Tender For corrigendum : : supply, installation, testing & commissioning of electrical equipment for dg block 119a of inrp - ht panels (119a)supply, installation, testing & commissioning of indoor type floor mounted, single front, metal clad, 1250 a, 6.6 kv, 3 phase, 3 wire, vcb switchgear panel suitable for a short circuit current of 31.5 ka for 3 seconds, internally arc tested for 31.5 ka for 1 second, comprising of following incoming & outgoing feeders : incoming feeder: 1 no. 1250 a, 3p vcb outgoing feeders: i) 7 nos. 630 a, 3p vcbii) 1 no. 1250 a, 3p vcb as tie feederwith surge arrestors, relays, pts, cts & other necessary accessories including associated structural steel required for complete installation of the panel & equipment earthing of the panel from both the earthing terminals of the panel to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings. reference drg. nos: ip1/119a/05027339/dwg/001/r0 & ip1/119a/05027339/dwg/002/r0(note: terminal box of each incomer of 6.6kv switchboard shall be suitable for terminating 4x3cx400 sq.mm., 6.35/11kv (e), a2xwy cables.), supply of spares for ht panels as per attached spares list mentiond in section c, part ii of tender, 2.5 mva, 6.6/0.433 kv dry type transformers (119a)supply, installation, testing & commissioning of 6.6/0.433 kv, 2.5 mva, dyn11 dry type cast resin transformer having percentage impedance of 8.5% complete with ht cable end box, lt bus duct flange, off load tap changer on ht side with range of +/-5% in steps of 2.5%, wti scanner, ct for restricted earth fault protection and other necessary accessories including associated structural steel required for complete installation of the transformer & equipment & neutral earthing of the transformer from both the earthing terminals of the transformer to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings.reference drg. no. : ip1/119a/05034347/dwg/001/r0, supply of spares for dry type transformers as per attached spares list mentiond in section c, part ii of tender, 2000 kva diesel generator sets (119a)supply, installation, testing & commissioning of 3 phase 2000 kva prime power 433v, 50hz, 0.8 p.f. diesel-generator sets with 110% overload capacity for 1 hr with four (4) stroke inline or vee type cylinder arrangement having engine speed 1500 rpm, 24v electric battery starting system with a provision of interchangeability of battery bank between two dg sets, complete with all auxiliary equipment including amf control panel, auxiliary mcc panels, heat exchanger cooling system, raw water pump, remote radiator with fans on terrace, ms exhaust piping, exhaust structure (maximum 30 m stack), 4 nos. of 3.6 cubic metre fuel day tank outside dg building (for all 4 dg sets) & 1 no. of 990 ltr intermittent tank inside each dg room, ms "c" class fuel piping between engine & fuel tank, dg room accoustic treatment & complete ventilation of dg room, brushless excitation for alternator, one no. 3200 amp 415 v 4p acb, ms structural steel supports/ channels/ angles & other necessary accessories including associated structural steel required for complete installation of the dg & equipment & neutral earthing of the dg from both the earthing terminals of the dg to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & necessary statutory clearances from cpcb etc. as required and as per tender technical specifications & drawings. design and construction of foundation for exhaust pipe rack/ structure of dg set is included in the scope of the contractor.reference drg. nos. : i) ip1/119a/05034347/dwg/001/r0ii) ip1/119a/05044831/dwg/003/r0iii) ip1/119a/05044831/dwg/004/r0iv) ip1/119a/05044831/dwg/005/r0v) ip1/119a/05044831/dwg/006/r0, supply of sp

CTN :45408700

09 Jun, 2026 NA

Hyderabad - Telangana

Tender For providing cable trays in the corridor from ground floor to third floor of nirman bhavan and providing insulation mat in electrical substation in kendriya sadan, koti, hyderabad.subwork/packages:pdg cable tray at nirman bhavan and pdg insulation mat at kendriya sadan

State Government

CTN :45386911

22 Jun, 2026 10.00 Lacs

Delhi - Delhi

Tender For supply of furniture items at special commissioner office, 1st floor, office block 3, east kidwai nagar, new delhi - revolving chair type-1revolving chair- size- h: 1210-1330mm, seat h: 465-585mm, d- 690mm, w- 640mm. executive hi-back chair with bio synchro mechanism spring tention auto adjusted according to weight of body. pu padded seat & pp back with mesh fabric - lumber support in built. head rest with d-direction adjustment. with 3- direction adjustment arm rest. 5-prong nylon base for stability. twin wheel heavy duty castor for easy mobility under load. quality tapestry. high density moulded pu cushion.the item should be from the approved make of durian/ godrej/ hni/ herman miller/ steelcase or equivalent make., executive tableexecutive table- overall size: table - lenght-2100mm x width-900mm x height-750mm, side runner -width- 1200mm x depth-450mm x height-750mm, back runner- width-1650mm x depth-450mm x height-750mm, corner unit - lenght-450mm x width-450mm x height-750mm, 3drawer pedestal size- width-450mm x depth-540mm x height-650mm, table- made of bwr ply wood laminated with good quality mm thk laminate fitted with 25mm thick mdf fascia duly deco painted. door & drawer front made of 18 mm thk bslpb. top of desk and cabinet made of 12mm thk clear float glass. product must be in compliance with drawing and as per architect instruction complete product must be knockdown type in construction.the item should be from the approved make of durian/ godrej/ hni/ herman miller/ steelcase or equivalent make., reception deskreception desk-1500- overall size: - w:1500mm, d:750mm / 832 mm, 1200ht top d:728 mm. top made of 25 mm thick pre- laminated particle board. pvc edge beading of 2 mm edges by through feed machine. provision of cable manager as per l.h. orr.h. side requirement. provide duct for wire management. front covered by l-shape wooden box size-h-1200 mm, w-600 mm, d-300 mmmobile pedestal unit plpb- size: height:650mm, width:400mm, depth:450mm top made of 18mm thick pre- laminated particle board. side, back and drawer front are made by 18mm thk. pre-laminated particle board. metallic finish heavy duty handle. superior quality makes front mounted lock. provision of casters for mobility. special drawer slides for filing drawer. other drawers on roller slides. the item should be from the approved make of durian/ godrej/ hni/ herman miller/ steelcase or equivalent make., workstation on 1 seater with keyboard tray cpu trolly & mobile pedestal drawerworkstation - 1 seater with keyboard tray, cpu trolly & wooden mobile pedestal, overall size- l-1640 mm, d-820mm, h- 1215mm, working h 750mm, top made of pre laminated particle board with pvc edge beading. understructure also made up of pre laminated particle board with pvc edge beading.top- size: - 1500x750x25 mm thk. pre-laminated particle board. side edges covered by 2 mm thick pvc edge beading by through feed machine. 70mm thick tiles base partition- internal frame are made by 1.6mm thk. cold rolled close annealed powder coated sections. tiles are made by 12mm. thk. pre laminate particle board. tiles are also available in glass, fabric and steel option. frame structure are fabricated by mig/tig welding machine. tiles are fitted by high strength pvc dowel in pvc insert with transition fit. provision of slot for cabling and accessories. upper and side trim are 1mm thk. extruded powder coated aluminium section and pole is 1.6mm thick aluminium.mobile pedestal unit plpb- size: height:650mm, width:400mm, depth:450mm top made of 18mm thick pre- laminated particle board. side, back and drawer front are made by 18mm thk. pre-laminated particle board. metallic finish heavy duty handle. superior quality makes front mounted lock. provision of casters for mobility. special drawer slides for filing drawer. other drawers on roller slides.the item should be from the approved make of durian/ godrej/ hni/ herman miller/ steelcase or equivalent make., revolving chair type-2size-

Cable Trays Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors