Latest cabling system Tenders | Government cabling system Tenders

Central Government/Public Sector

CTN :45422923

09 Jul, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For supply of traction transformer complete with cooling system like ht cable along with protection shield in passenger compartment and under-frame area, thermostats etc. related protection equipment and safety chain arrangement including termination crimping lugs, cable markers with heat shrinkable sleeves for power and control cable, equipment mounting and earthing hardware and accessories as per attached specification. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45409735

16 Jun, 2026 NA

Kapurthala - Punjab

Tender For supply of traction transformer for hs-spic with required number of secondary traction windings along with protection equipment, safety chain arrangement and ht cablewith protection shield including termination crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and accessories including auxiliary machines such as oil pump, oil cooling blowers as per clause 4.3 of rdso specification no. rdso/pe/spec/emu/0196-2019 (rev.0) along with mounting hardware (one set per hs-spic)., as per drawing: as per clause 4.3 of rdso specification no. rdso/pe/spec/emu/0196-2019 (rev.0), packing instruction: suitably covered with biodegradable transparent polythene and packed in wooden box.the material used for product packaging shall be eco-friendly .each packing shall be stenciled/labeled handle with care, consignee name, order no,pl's no , description ofitem, batch no, drg/spec no, qty,firm's name, &date of despatch etc. note- 1) firms have option to provide qr code. for linkage of po, the cardboard box shall carry a qr code having details as listed below: a)nameof the manufacturer b)purchaseorder number c)purchaseorder date d)uniqueserial number (or lot number for bulk items) of the manufacturer or e)dateofmanufacture f)deliverychallan no. g)deliverychallan date 2.the qr code shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. [ warranty period: 36 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45405599

25 Jun, 2026 NA

Ajmer - Rajasthan

Tender For supply of led solar street light fitting with pole as per attached specification- power of light source : 30 watt battery capacity(ah) : 30 features : free from glare, flickering and uv ,full protection against open circuit, accidental short circuit and for reverse polarity provided. ,operating from dusk to dawn first four hour full brightness, rest of the time at lower level, with motion sensor, pv module(wp) 75 cycle/ current battery cycle life 2000 cycle at 80 % discharge number of batteries required for operation- 01 no. type of battery lithium ferro phosphate battery (lifepo4) suitable adapter to be supplied to make the equipment work on 230 v 10 %, 50 hz*-yes indicators on the system provided with 2 led indicators: a green light to indicate charging in progress and a red led to indicate deep discharge condition of the battery. the green led glow only when the battery is actually being charged. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45421272

13 Jun, 2026 NA

Bulandshahr - Uttar Pradesh

Tender For providing of tentage service lumpsum based - outdoor gatherings, social gatherings, social gatherings, lighting floorings, tent rentals, furniture & equipment rentals, power supply, logistics & delivery, maintenance & support, safety measures, dismantling and rem..

State Government

CTN :45412896

11 Jun, 2026 NA

Bhubaneswar - Odisha

Tender For request for proposal (rfp) for selection of firm / company for supply, installation, testing & commissioning of tools, equipment and consumables addressable fire alarm control panel , addressable smoke detector with base , addressable multisensor detector with base , addressable heat detector with base , addressable manual call point (mcp) , addressable audio-visual strobe , addressable input/output module , addressable isolator module , addressable control module , addressable monitor module , addressable repeater panel , addressable zone module , programming software & license , programming tool / interface , laptop for programming , loop simulation / fault kit , wooden wiring cubicle with metal framing , 18v brushless cordless jigsaw machine , heavy duty cable cutter , cable insulation remover , deburring tool , spirit level 1200mm , precision screwdriver set , quick/trigger clamp , step bit , hole saw , tubular crimping tool , magnetic wrist belt , , , tool belt , tool trolley , non contact tachometer , phase sequence meter , , , 3-phase multifunction meter , squirrel cage induction motor with mechnical loading (break drum type) , single phase induction motor including centrifugul switch along with starting and running capacitor , soft starter for motors , dol starter , star delta starter , power quality meter , upgraded fault simulator , 5 pin industrial plug and socket , spirit level , pipe cutter (plastic) , plastic rounder , plastic pipe chamfer , external bending spring , external bending spring , internal bending spring , internal bending spring , crimping tool , over head shower with shower arm 300 mm , thermostatic mixing valves , digital inclinometer , copper tube bender , , rothenberger standard bender , rothenberger robend 4000 set , portable hand held electric pipe threading machine , hdpe butt fusion machine , co2 cylinder with gas , co2 regulator with preheater , vfd , inverter , vibration meter , thermal imager/thermographic camera , lokring joint complete set , inverter pcb testing jig , thermostat , varistor , power relay , rectifier

CTN :44959364

04 Jun, 2026 NA

Mumbai - Maharashtra

Tender For bid to ras bid to ras corrigendum : supply of integrated navigation mfw , radars , conventional gyro-ts- ibs , fibre optic ring laser gyro , gyro distribution unit , gyro repeaters bulkhead mounted analogue steering _heading repeater , gyro repeaters bulkhead mounted digital heading repeater , gyro repeaters flush mounting digital heading repeater , gyro repeaters pelorous type bearing_ heading repeater , gyro repeaters fixed type bearing repeater , dgps system with combined gps_beacon antenna , glonass , irnss , ecdis , uais , magnetic compass , voyage data recorder , bridge navigational watch alarm system_bnwas , sound reception device_elephant ears , meteorological arrangements , wheel house consoles housing third party equipment , training bridge console , docking console , navigational accessories , any other requirement as per nibs , power supply requirements acos ups batteries and other accessories , cables-ibs-ts , ibs documentation-ts-qty as per tsp. , ibs-ts-obs , services of engineers-connectorization , services of engineers-stw , services of engineers-hats , services of engineers-sats , training

CTN :45404144

09 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for electronics and communication engineering department - supply of equipment for electronics and cmmunication engineering department, 8051 micro controller kit :specification : operating voltage: +5 v dc. flash memory: 4 kb (at89c51) / 8 kb (at89s52). ram: 128 bytes internal ram. 16 2 alphanumeric lcd display. push buttons / tactile switches. dip switches for digital input. inbuilt adc interface: ldr, potentiometer. inbuilt dac interface. inbuilt stepper motor driver with stepper motor. inbuilt dc motor driver with dc motor. 1 4 led array, 1 4 keypad, 1 relay. 1 buzzer, 16 2 lcd display, 1 pwm driver. 1 hardware interrupt key, inbuilt rtc. inbuilt eeprom and uart module. 4 7-segment display. supports both assembly and c language programming. pc interfaceable., temperaturemeasurementkitspecification : sensors:rtd (pt-100), thermocouple (fe-k/j-type), and/orthermistor (ntc). display: 3 digit led/lcd digital display(typically 200 mv fsd). temperature source: portable water kettle orheater block. signal conditioning: on-board circuitry foramplification, linearization, and cold junctioncompensation. test points: multiple 2 mm / 4 mm banana socketsfor monitoring input/output signals. power supply: 230 v ac, 50 hz, single-phase. accessories: glass thermometer, 10 k ntcthermistor probe, k-type thermocouple probe,patch cords and user manual., ask modulationanddemodulation kit:specification : message signal1:8-bit variable data,amplitude 5v. message signal 2:debounced data, amplitude low (0) and high (5 v). message signal 3:fixed data 25 khz, 12.5 khz, 6.25 khz, 3.12 khz,amplitude 5 v. carrier signal: sine wave, frequency 200 khz,amplitude 5 v. modulator type: switching modulator using analogswitch / transistor switching ic. demodulator: envelope detector and lpf. comparator: lm311 based. supply voltage (board): +12 v, +5 v dc. supply current: 100 ma minimum. input voltage: 230 v ac, 50 hz. interface connectors: 2 mm banana socket., dth trainer kit:specification :power supply: 200 v to 240 v ac, 50 hz.dish antenna: 1.5 ft aluminium steerable dish antenna.lnb (low noise block down converter): input frequency: ku-band. output frequency: 950 mhz to 1450 mhz. conversion gain: 65 db. noise temperature: 35 k (max).set-top box receiver in trainer form: if frequency: 70 mhz. video bandwidth: 50 hz to 5 mhz. video output level: 1 vpp at 75 load. video polarity: normal/inverted, switch selectable. audio subcarrier frequency:tunable from 5.0 mhz to 8.0 mhz. remote control provided. hdmi cable: 10 m.controls: channel selection. volume control.fault simulation: five built-in simulated faults for troubleshootingexperiments. if signal disconnected. video output fault. audio mute fault. tuner misalignment. rf output interruption.pcb size: 15" 12" with multicolour section-wise blockdiagram.standard accessories: 1.5 ft dish antenna. lnb. trainer pcb. dish connecting wire. audio-video cable. user manual. acrylic cover. hardware materials for assembly of dish antenna.additional features: dth subscription connection withdoordarshanfree channels. free-to-air channel demonstration., fpga trainer kit:specification : must use industry-standard mid-range fpgadevice usb-jtag programmable, compatible withvivado ise (webpack). power supply: 5 v dc through usb or externaladapter. on-board peripherals: leds, switches, pushbuttons, 7-segment display,clock source, gpio /pmod expansion ports, uart, vga / hdmi, usbuartbridge, usb cable. user manual.

CTN :45404153

09 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for electrical and electronics engineering department - supply of equipment forelectrical and electronics engineering departmen, loading rheostat 3 phase :specification :rating: 5.25 kw supply: 415 v ac, 3-phase, 50 hz total number of load steps: 6 main switch to be provided approximate dimensions: 18 18 22 inches (l b h) comprising special cement-insulated electrical load resistors mounted on powder-coated ms panel/enclosure individual on/off rotary switches for load selection mounted on rubber wheels/casters for portability suitable for laboratory load testing applications proper insulation, ventilation, and earthing arrangement to be provided , loading rheostat 1 phase :specification :type: single phase loading rheostat power rating: 5 kw supply: 230 v ac, single phase, 50 hz total number of load steps: 8 approximate dimensions: 18 18 22 inches (l b h) comprising electrical load resistors suitable for laboratory loading applications resistors shall be special cement-insulated type mounted on powder-coated ms panel/enclosure individual on/off rotary switches provided for load selection mounted on rubber wheels/casters for portability , single phase resistive load :specification :type: single phase loading rheostat power rating: 5 kw supply: 230 v ac, single phase, 50 hz total number of load steps: 8 approximate dimensions: 18 18 22 inches (l b h) comprising electrical load resistors suitable for laboratory loading applications resistors shall be special cement-insulated type mounted on powder-coated ms panel/enclosure individual on/off rotary switches provided for load selection mounted on rubber wheels/casters for portability , three phase capacitor bank :specification :3-phase capacitor bank rating: 2 kvar voltage: 440 v ac frequency: 50 hz heavy duty self-healing capacitor units powder coated ms enclosure compact panel mounted/floor mounted construction proper ventilation arrangement to be provided capacitor duty contactor/switch to be provided fuse/mcb protection to be provided discharge resistors to be provided for safety proper earthing arrangement provided , plc tranier kit:specification :plc make :allen-bradley / delta electronics / siemens orequivalentdigital inputs : 8 20 nos.digital outputs : 6 12 nos. (led / relay type indication)communication port : rs232 / usb / ethernet (if available)programming method : ladder logic programmingtoggle switches for digital input simulationled indicators for output status indicationanalog potentiometers for analog input experimentsproximity sensor interface providedrelay output interface providedinput supply : 230 v ac, 50 hzbuilt-in regulated 24 v dc power supplyladder diagram programming software to be providedcompatible programming software license to be providedsuitable for basic plc programming and automationexperiments

CTN :45404122

09 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

CTN :45404137

16 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of lab equipment for department of electronics and communication engineering - dual output regulated dc variable power supply, function (signal) generator, digital storage oscilloscope, digital ic trainer kit with breadboard, dc voltmeter, dc ammeter, decade resistance box, decade capacitance box, decade inductance box, 8051 microcontroller kit, ask modulator and demodulator trainer kit, dth trainer kit, fiber optic communication demonstration trainer kit, sim reader trainer kit, fpga trainer kit

Cabling System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government