Latest cage ladder repair Tenders | Government cage ladder repair Tenders

State Government

CTN :45418513

23 Jun, 2026 NA

Indore - Madhya Pradesh

Tender For supply of kids play item - kids play equipment, double swing (2-seater swing), four seater swing, double swing 4 seater, multi-seater circular swing (merry-go swing), 8-seater merry-go- round (mgr), elephant rider, animal swing (single/double seater frp animal shape), elephant slide, double see-saw, 10-seater round merry-go- round (large mgr), adventure tyre climbing., commando net climbing, adventure patiya (wooden plywood) walk, adventure tyree walk, kids multiple adventure play zone 3 in one, leg press double, triple twister, horse rider dimensions, outdoor double air walker, dinosaur shape slide, seater round chakri main frame, leg press machine (seated), bench press two seater, chest press (seated) double, parallel bars, sit-up bench / inclined board, rowing machine, cycle (air bike), swinging bridge, ladder crossing, tyre swing, small siwing, net crossing, burma bridge, tyre walk, double twister, shoulder wheel /rotation, single twister, chest press singal seater, arm and paddle bike, kids multiple play zone 4 in one, giraffe slide big, rocker, satellite climber, jumbo spiral slide, 3 piece tunnel slide, double slide fun, theme based decorative dustbins, rcc garden bench three-seater, iron 3-seater garden bench

State Government

CTN :45439013

15 Jun, 2026 8.58 Lacs

Morbi - Gujarat

Tender For annual rate contract for hiring of vehicle tower ladder with hydraulic elevated platform with frp bucket for 24 hours with diesel and driver under morbi city-2 sdn(pr-854033)(2nd attempt)

CTN :45367027

08 Jun, 2026 NA

Panchkula - Haryana

Tender For supply of digital verniar calliper 200mm , digital micrometer in inches size 100 to 125 , digital verniar calliper 300mm , digital weighing scale slid base back 50 kgs , digital micrometer in inches size 125 to 150 , digital casti sunshine tester , table vice wench fined type s 3-8 , auto folding aluminum ladder 25mm dia 8 , self supporting extendable telescopic lower type aluminum ladder 20 to 36 , digital varniar caliper 150mm , digital micrometer in inches size 0 to 25 , digital clamp meter , digital multimeter , general trimtree folding aluminum ladder , hand trolley , paper shredder , general purpose folding aluminum ladder 63mm , battery 24v 150 ah make exide , frp wall support ladder size 4 mtr , book case size 66 x 33 x15

CTN :45366424

15 Jun, 2026 26.67 Lacs

Palanpur - Gujarat

Tender For e-tender for hiring of jeep-dalu (articulated hydraulic elevating platform mounted with frp ladder of latest year (latest model) for utilization in ambaji s/dn under palanpur division office-2 for 2 year

CTN :45318760

15 Jun, 2026 NA

Ajmer - Rajasthan

Tender For supply of al ladder a type of height 10 ft , ladder telescopic fordable type , ladder al 20 36 extension wall , ladder al 20 36ft ext 66x31x3mm 25mm dia , single straight ladder al 15ftcorrugate , step ladder frp a type self support10f , ladder telescopic close 20 ft ext 50 ft

Central Government/Public Sector

CTN :41711462

28 May, 2026 12.83 Lacs

Sonbhadra - Uttar Pradesh

Tender For bid to ras corrigendum : supply of platform step ladder (v2) (q3) , switch, gang oprtg air brk, 33kv, 1250a, 3p , switch, air break isolator, 11kv, 1250a, 3p, hrzntl , isolator elec, off load, 11kv, 1240a, vrtcl , clamp, pg, wlf to wlf, 33kv, 1250a, al, bmtlc , clamp, pg, wlf to dog, 33kv, 1250a, al, bmtlc , clamp cnctr, pad, 33kv, al, wlf, 1250a, bmtlc , clamp cnctr, pad, 6.6kv, al, dog, 800a, bmtlc , clamp cnctr, t, 33kv, al, f-wlf, 1250a, bmtlc , ladder, 10ft, al , ladder, 11m, al , ladder, 6m, fbr gls , ladder, 20ft, frp-fbr , ladder, frp, extended 12m, f-electrical use

CTN :45305833

08 Jun, 2026 35.94 Lacs

Faridabad - Haryana

Tender For beautification works in including play equipment, open gym, plantation and repairing of boundary wall at brahampuri park saran village boosting park in ward no. 09 nit faridabad.(recall) - labour charge for making tee connection with existing line excavation, cutting jointing and making connection with existing line complete in all respect, supply and fixing of pvc tee 150x150x150mm dia., chain swing (2seater): 10 l x 6 w x 8 .5 h. horizontal frame and vertical legs is of m.s. pipe 2 x 12 gauge. it stays with m.s. pipe 1 x 12 gauge. swinging seats-2nos is of frp molded seat of 2mm thick fitted with m.s. pipe frame x 12 gauge which hang with m.s. chain 6mm thick duly plated with ball bearing and m.s. flat 6mm thick housing. complete with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division) in multi colors item with gst, transportation, installation with c.c and amp: labor at site., sea saw (4seater): - 8 l x 5 .5w x 15 high. frame is of m.s. pipe 2 x 12 gauge. sitting planks is of m.s. pipe 2 x 12 gauge and its cantilever and handles is of m.s. pipe x 12 gauge. sitting seats 4 nos. is of molded frp material in 3mm thick with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division). complete item with gst, transportation, installation with c.c and labor at site., bridge ladder: 10 l x 2 w x 6 h. horizontal ladder is of m.s. pipe 2 , andamp: vertical ladder is of same material of 12-gauge isi mark with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division). complete item with gst, transportation, installation with c.c and amp: labor at site., merry-go-round (4-seater): 5 dia. main frame is of m.s. sq. pipe 2 x 2 x 14 g and having suitable handle andamp: foot-rest is of round pipe x 12 gauge. central pipe is of m.s. pipe 3 x 12 g with heavy duty shaft 50mm thick andamp: ball bearing assembly. it consists of 4no chair made of molded frp plastic. complete with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division) in multi colors item with gst, transportation, installation with c.c and amp: labor at site., pvc reducer 150mm x 100mm.., frp dustbin (tilting type) of capacity 60 ltr. body is made of moulded fiberglass re-enforced plastic (non- halogen fire retardant resign) of 2mm thick having its lid with handle. it fitted with m.s. square pipe 1.25` x 1.25` x 14 gauge and m.s. flat 50 x 5mm, 30x 5mm base structure with epoxy primer interseal 670 hs and pu finish (interthane 990) paints. complete item with gst. transportation, installation with cc and labor at site., making connection with existing sewer main line, p/f of pvc 100mm dia bend., supply of pvc pipe 150 mm dia with isi mark 8kg.cm2 pressure, supply of good earth complete as per site requirement, p/f chest press is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 32mm nb b class gi-pipe. the handle frame and seat is made of 32mm nb b class gi-pipe. connecting rod is made from 25mm nb b class gi-pipe. seat is made from roto-moulde. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used., p/f seated puller is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 50mm and 25mm nb b class gi-pipe. the handle frame and seat is made of 32mm nb b class gi pipe. connecting rod is made from 25mm nb b class gi-pipe. seat is made from ms sheet of 2mm thick. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used, p/f sky walker is made from is-1239 b class

Central Government/Public Sector

CTN :45255770

09 Jun, 2026 3.63 Lacs

Jhunjhunu - Rajasthan

Tender For supply of 091600330 frp earth discharge rod for 33 kv system , 091900011 g i strip hot dip for electercal earthing , 091900012 g i strip hot dip for elect ercal earthing , 091900013 g i strip hot dip for electercal earthing , 242000006 ladder aluminium single 20 ft , 095500008 lightening arrestres for explosive magzinee , 095500019 metal oxide gapless heavy duty lightning arrestor

State Government

CTN :45094036

15 May, 2026 4.88 Crore

Parbhani - Maharashtra

Tender For corrigendum : tender for supply of t&p material (safety equipment s) under parbhani circle. - safety belt, lineman tool bag, 33kv rubber hand gloves, 11kv rubber hand gloves, rubber hand gloves lt (class 0), tester, l.t. discharge rod, ht discharge rod, screw driver-100,150&225 mm, spanner sets ring type, double ended spanner set, adjustable spanner-255mmx30mm., led torch with rechargeable batteries, nylon/manallia rope 24 mm., frp ladder, hacksaw, crimping tool, axe, hammer, safety helmet en 397 2012 (yellow)

corporations/Associations/Others

CTN :45151622

18 May, 2026 9.74 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of children play equipments, open air gym, in various parks in dhanas, chandigarh, under wdf - providing and fixing of swing ( 2 seater) 10 long 8 -6 high & 5 -0 wide made out of 2 m.s. pipe completed as per drg no. 02 job no. m-06 and to the entire satisfaction of engineer-in-charge, providing & fixing of wide slide ssarea : 3.9 m x 1.3 msafe play area : 4.9 m x 2.3 mplatform height : 1.2 mthe wide slide on of the attractive slides of its kind. the chute is made up of 14 swg ss/gi sheet. the stainless steel used is of 304 grades. the chute is supported by 40x5 ms angle. this chute is attached to the platform made from ss/g sheet. the platform is supported by 40 nb gi pipe. the ladder is made using 20 nb and 25 nb gi pipes. the steps for the ladder is made are of 20 nb gi pipes. the sliding height is 2.4m. the landing support used is made up of 25 nb pipe. the handrail of the chute is made up of 20nb power coated gi pipe. the slide is innovative wide slide on which at a time 3 kids can slide., providing & fixing of multi activity play system (ii) (maps ii):deck 3 ht. 1 deck 2.5 ht. 1 frp staircase 3 ht. 1 frp curve slide 3 ht. 1rainbow ladder 1 double swing 1 bubble pannel 1 steering 1area: 7mx5m safe area: 8mx6m 1. deck 3 height & 2.5 height - the deck of maps is made up of 4mm thickness fiberglass reinforced plastic. the top of the platform shall be made up of anti skid surface with multicolored pigment resign. all the attachments is through nylon clamps only. the size of platform is 1.6mx1.6m. 2. frp stairs case - the ladder shall be made up of the fiber reinforced plastic with a thickness of 4mm. it should have reinforcement to maintain strength and avoid bending. 3. frp curve slide- it is made up of 4mm thickness fiber reinforced plastic. 4. rainbow ladder- it is 5 long in height, the main frame of ladder is made up 20 nb g.i. pipe and risers are made up of 40 nb g.i. pipes. 5. double swing.-leg support in 40 nb g.i. pipe and top pipe is made up of 50 nb g.i. pipe seat is made up of 10 mm reinforced rubbers and g.i. pipe should be rubber coated and movement with nylon clamps at top. 6. bubble panel.-the railing is providing to all decks for safety and it is made up of lldpe. 7. steering wheel-it is made up of lldpe., providing and fixing of chest press double complete in all respects having following specifications. size / dimensions- length -1200 milimeter, width- 700 milimeter, height 1800 milimeter maximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions. colour:- green, paint finish- power coated, uv resistant, paint coating thickness (min) 100 micrometer, warranty - 3 years. co

Cage Ladder Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

corporations/Associations/Others