Latest cage frame Tenders | Government cage frame Tenders

State Government

CTN :45651300

01 Jul, 2026 1.68 Lacs

Panchkula - Haryana

Tender For providing and fixing of contractor block and other electric components at various t wells in sector 5 panchkula - 24.5.1.6:- miscellaneous items 1.6. supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 16 sqmm [through rate], 20.114.9:- supplying erection, testing of fully automatic electric control panel board for t/wells in pump chamber consisting of ms sheet of thickness 14 gauge duly painted box type floor mounted made of angle frame containing 1 no. fully automatic air brake starter suitable for motor of the following capacity, min switch of suitable range with hrc fuse, 1 no. volt meter (0 to 500 volts), 1 no. amp. meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in electric control panel board complete in all respect as per specification given in schedule no. ii, including mcb, suitable, capacitor, wooden box etc as per site requirement complete in all respect. 9. 50 hp motor [through rate], 20.10.3 :- extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest railway station to site of works 3. 150 mm i/d [through rate], 20.11.3 :- providing and fixing cast iron double flanged swing check type reflux (non return) valves pn-1.6 marked with is:5312 including nuts and bolts marked with is:1363, rubber sheet marked with is:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-incharge 3. 150 mm i/d [through rate], 20.84:- providing and fixing of insulated rubber matting suitable for 11 kv installation 1 m x 2 m x 12 mm thick (is code 15652-40091) as per specification complete and as per directions of engineer-in-charge [through rate], ns item:- providing and fixing of contractor block mnx 80 landt make as per satisfaction of engineer-in-charge and attesting on load, ns item:- hiring of electronic borewell camera for videography 350 deep borewell urgently required for internal photography complete in all respect to the entiresatisfaction of engineer-in-charge, ns item:- measurement of discharge at tubewell of 1 hr after opening of upper bend with help of discharge flow meter including dismantling and reassembling of tee bend with help of chain block labour tool and plantcomplete in all respect (note any damage to site and material is responsibilityof the contractor)

State Government

CTN :45645068

29 Jun, 2026 NA

Umrer - Maharashtra

Tender For supply of construction material at g p dudha, nagpur 2026-2027 - materiyal list, metal 80 mm, metal 40 mm, metal 20 mm, metal 12 mm, barbed wire / fenshing wire, sand, murum, cement, rolar, water tankar, khadanga, sand black, sittl 6mm, still 8 mm, still 10 mm, still 12 mm, still 16 mm, still 20 mm, centring tar, bricks table, mixer machine, pocland, iron door with frame & palla, cement door palla, cement door frame, iron sheet of 0.50 mm thick and 930 profile roof, islb angle, iron angle, iron window grill & palla, plastic water tank (500 lit.), plastic water tank (1000 lit.), plastic water tank (2000 lit.), distemper, jcb, plastic water tank (15000 lit.), alluminium sliding window, cement pipe 150 mm, cement pipe 300 mm, cement pipe 600 mm, cement pipe 900 mm, cement pipe 450 mm, kota stone, vibrating machine, ms grill, snowsem, cement paint, oil paint, tarpipne, gi sighn board with painting, wc pan, paiwar block, compound cement poll, polythene sheet, rubble, rcc chair, tiles vetrified, tiles ceramic, tiles polished chequered, tiles simpl chequered, 4 inch pvc vaint/waist pipe, putty material, chainlink fencing, water profing component, magic pit cement tank, hyash bricks, wall putty, intair wall paint, intair wall primer, intair wall plastic paint, exterior wall paint, brush 4 inch

State Government

CTN :45647031

29 Jun, 2026 NA

Bhandara - Maharashtra

Tender For supply various type construction material at gp palora tal. mohadi dist. bhandara - 80 mm. metal white-(hand broken metal) with royalty, 40 mm metal white- (hand broken metal) with royalty, 40 mm metal black- (crusher broken metal) with royalty, 20 mm metal black- (crusher broken metal) with royalty, 12 mm metal black-(crusher broken metal) with royalty, 6 mm metal black-(crusher broken metal) with royalty, boulders rubbles and masonary stones, sand river (unscreen) with royalty, sand (nallah bed), soft murum with royalty, hard murum with royalty, soil, cement 53 grade opc, cement 53 grade ppc, burnt bricks ( ii class), mild steel bars of various sizes, tmt steel bars of various sizes, oil paint isi mark, plastic emulsion paint, wall paint isi mark, centring tar, torpin oil, bitumen pack tin 60/70 at mumbai, murum carting only, weste material carting, mixter machine per day with desel and driver, water tanker with desel and driver, centring rent for drain work, centring rent for cement road, centring rent for building work, rcc pipe 1000 mm, rcc pipe 800 mm, rcc pipe 600 mm, rcc pipe 450 mm, rcc pipe 300 mm, compaction of earth work in embankment upto layer of 30cm comp machinary charges only, compaction of soft murum/ kankad 2.00 to 7.00 width (200mm loose) with static roller including necessary artificial watering etc complete, transporttion of soft murum on road side etc complete as per analysis, information board 1)size 1.20 x 0.90 , information board 2) size 0.75 x 0.90, transportation of excavated soil from ex-mat. tank to field up to 3km, wooden door frame size 6 * 3.25, cement door frame size 6*3.25, wooden door size 6 * 3.25, plywood door size 6 * 3.25, door kits per door, precost sheet, oil engine, meter stone, ferlong stone, jcb per hours, rollar per day with desel driver, griil work, murga, pavour block(gattu), quota tyles, vetryfied tyles, bt pod, wc pod, nutri trap, ms poor, ac sheet, gi sheet, distemper, birla white, in well boar 4.50 inch, in well boar 6.00 inch, epex ext. primer, epex ext. emulsion, epex interial emulsion, white putti, water tank (syntax), kadappa stone, nahani tap, fly ash brick(cement bricks), gi pipe 15 mm dia., gi pipe 20 mm dia., cpvc pipe 50 mm, cpvc pipe 25 mm, cpvc pipe 15 mm, water level indicator, lighting conductor, type coper patti, gi cd staire, pevor block (ruber quoted), pevor block color quoted, pvc lbow verious size, pvc t verious size, 25 mm pvc pipe, 250mm pvc pipe 6 kg, 250mm pvc pipe 4 kg, 200mm pvc pipe 6 kg, 200mm pvc pipe 4 kg, 110mm pvc pipe 6 kg, 110mm pvc pipe 4 kg, 90mm pvc pipe 6 kg, 90mm pvc pipe 4 kg, 75mm pvc pipe 6 kg, 75mm pvc pipe 4 kg, 63mm pvc pipe 6 kg, 63mm pvc pipe 4 kg, sluice valve 80 mm, sluice valve 125 mm, sluice valve 150 mm, sluice valve 200 mm, sluice valve 100 mm, air valve 50 mm, air valve 80 mm, air valve 50 mm, reflux valve 80 mm, gi pipe 80 mm, pvc special tee,bend,coupler,taispeace,pipe, gi special hang, nutbolt,rubber shocate, tee, bend, solution, 3 seater steel chaire, 3 seater rcc chaire, toilet sheet, pump 5 bhp 200 mm & 120 mm head, pump 10 bhp 200 mm & 120 mm head, gi bend 80 mm, gi coupller 80 mm, control panal box, steel angle, chaniling facing, primer, plywood sheet, ceramic tiles, handwash basin, tap, water meter, waterproof cement

Central Government/Public Sector

CTN :45648866

02 Jul, 2026 NA

South Andaman - Andaman And Nicobar Islands

Tender For providing of repair and overhauling service - h-078: 02 nos break holding frame support of port and stbd anchor capstan thinned down/holed. to be renewed as per sample. mat- ms c- channel, size: 300 mm x 200 mm x 15 mm approx.

corporations/Associations/Others

CTN :45657695

08 Jul, 2026 4.90 Lacs

Anpara - Uttar Pradesh

Tender For tender for supply of cctv spare - out-door cat fa 4 pair networking cable onu (wlfi router) gepon onu, ige 1pon port with routing model gopon 10002 1000r-onu or its equivalent full hd led tv 40 inch 01 vga and 02 usb interface power adopter 5v dc ia for media converter input supply- 90 to 265 v ac outplue-5v dc ia power adopter 12 v dc ia for onu input supply-90 to 266 v ac, output-12v dc ia 16 tb external sata hard disc 5 mp wide angle, day-night, ip based full hd bullet camera, housing protection class-ip68 specification: camera type: full hd ip based 5 mp fixed bullet camera communication onvif profile s compliant resolution 5 mp: (min. 1920x1080) compression h.264, h.264, mjpeg, mpeg4 protocol ipv4/v6, tcpap, udp, rtp, rtsp, rtcp, http, https, ssl, icmp, ftp, smtp, dhcp, pppoe, upnp, igmp, snmp v2cc/v3 conjour, dns, ddns, qos, ntp, nfs image: sensor 1/2.8" cmos or better focal length: 28 mm his type: fixed data connectivity wired (ofc & ethernet) ir range upto 100 meter installation: pole mount wall mount housing ip66 ip67 white balance yes iris control auto manual temperature 30°c to 60°c frame rates 1080 p 25/30 fps interface rj45,10/100/1000 mbps ethernet 4 port por switch 10/100/1000mbps 10/100/1000 mbps single mode media converter (b type) for receiving (rx) with rj45 port 10/100/1000 mbps single mode media converter (a type) for transmitting (tx) with r345 port 1500 va/865 w single phase 230 v 6a lise interactive mini-ups with adequate backup tine including automatic voltage regulator (avr) with wide input vahage rangs of 170-260v, battery, data line surge protection, out socket: minimum 4, lcd display displaying lood, status of battery, brief transfer time in ms etc. 2 core 10 sqmm flexible, multistrand, unarmoured pvc sheathed al. cable

Central Government/Public Sector

CTN :45666219

14 Jul, 2026 19.92 Lacs

Umiam - Meghalaya

Tender For supply of cylinder side casting frame , main gear , pinion gear casting , pedal spacer guide casting , bottom pedal casting , cylinder side bearing house casting , cross casting , connecting rod bearing housing casting , ms casting for fixing the blades , m.s. flat 20 x 3 mm , m.s. flat 30 x 6 mm , m.s. flat 50 x 5 mm , saw blade 2 and half inch size , m.s sheet 4x8 sq.feet 16 gauge , m.s sheet 4x8 sq. feet 18 gauge , m.s sheet 4x8 sq.feet 14 gauge , stainless steel sheet 304 grade 4x8 feet 1.2 mm thickness , ms equal angle 40 x 40 x 5 mm , ms equal angle 25 x 25 x 5 mm , ms equal angle 30 x 30 x 5 mm , ms equal angle 50 x 50 x 5 mm , ms rectangular pipe 3 inch x 1 inch , ms channel 20 mm , black conduit pipe 25 mm outer dia , ms square pipe 1 inch heavy , ms square pipe 2 inch heavy , ms square pipe 1 and one-fourth inch , ms square pipe half inch 15 feet length , plain pipe 25 mm outer diameter , ms rod 8 mm , ms rod 10 mm , ms rod 12 mm , ms square rod 10 mm , ms square rod 8 mm , ms cold roll bright bar 25 mm 20 feet length , ms cold roll bright bar 40 mm 20 feet length , gi nuts and bolts 9 mm diameter and 90 mm length , gi nuts and bolts 6 mm diameter and 45 mm length , gi nuts and bolts 8 mm diameter and 45 mm length , gi nuts and bolts 13 mm diameter and 127 mm length , gi nuts and bolts 10 mm diameter and 85 mm length , m s washer 10 mm inner diameter 25 mm outer diameter , m s washer 8 mm inner diameter 50 mm outer diameter , m s washer 19 mm inner diameter 50 mm outer diameter , m.s rivets 4 mm diameter x 5 mm length flat head , m.s rivets 5 mm diameter x 12 mm length round head , welding electrodes 2.50 mm size , welding electrodes 3.15 mm size , enamel paint mint green , thinner for paint , trolley wheel 8 inch size with 23 mm shaft size , ball bearings 6202 size , ball bearings 6200 size , cut off wheel size 355 x 2.8 x 25.4 mm , cutter grinder wheel 105 x 1.2 x 16 mm , flap disc 60 grit size 100 x 16 mm , grinding disc 105 x 1.2 x 16 mm , coal coke fuel , cotton jute , pillow block bearing p205 id 25 mm diameter , pillow block bearing f205 id 25 mm diameter , rubber dotted for plucker cleaning machine 10 x 2 x 3 cm lxwxh , cycle frame double bar ph type 22 inch size , crank and pedal for cycle 60 teeth with 210 mm diameter , cotter pin lock for crank and pedal 10 mm , 22 teeth sprocket freewheel rear flywheel 34 mm inner diameter , bicycle chain pitch 12.7mm, width 3.17 mm, 8 feet length , stainless steel allen counter sunk screw 6 x 25 mm , stainless steel allen counter sunk nuts 6 mm , stainless steel allen counter sunk washer 6 mm , high speed steel planer blades 90 x 39 x 3 mm , ms heavy duty hatch hinge free swing 37 mm l x 67.5 mm w x 2 mm t , ms hinge 3 inch , chrome finishes ms tower bolt 3 inch size for door , water soluble cutting oil metal working fluid, iso certified , machine oil ep 68 with iso certification , hydraulic oil 68 iso certified , ms taps bsw 1 by 8 inch, 5 by 32 inch, 3 by 16 inch, 1 by 4 inch, 5 by 16 inch, 3 by 8 inch , ms taps metric 9 mm and 10 mm , carbide end mill 8 mm and 10 mm , combination spanner set from 3 mm to 22 mm size , bicycle grip handle , combination plier 7 inch , flat nose plier 6 inch , carbon brush for 4 inch angle grinder //bid details 2 / 67

CTN :45407184

27 Jun, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of procurement, fabrication and installation of display board of size 20ft x 8ft with ms pipe frame, ac

CTN :45499314

25 Jun, 2026 NA

Sonitpur - Assam

Tender For bid to ras supply of core , ceiling rose three terminal snow white , led bulk head fitting hwith led lamp 10 watts rechargeable , pvc flexible wire copper conductor multi stranded 0 point 0016 oblique 76 , pvc flexible conduit pipe 15 mm dia , pvc round or square block , fire extinguisher of 1 kg capacity comma dry power type along with its accessories , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long pipe , gi wire 4 mm diameter for earthing , charcoal , salt normal , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled , aluminium strips 25 x 3 point 0 mm , galvanised iron strip 32 x 6 mm , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt , study chair of size length 56 cm comma height 82 cm and width 56 cm , study table of size 4 feet x 2 feet wooden top on round tube structure with three drawers on one side , steel almirah of size 1855mm with 4 shelves ms sheet doors and and locker 1 point 00mm thick , mild steel rack adjustable comma sheet 1 point 00mm thick comma overall height 1 point 755m , hand held trolley of size 1200 x 900 x 1200 mm of 2 mm thick ms plateform and size of wheel 127 mm , kassi with handle , black steel sr shovel spade belcha , plaster trowel with wooden handle , showel square nose 14 gauge blade size 310 x 245 mm , plumb bob iron , crow bar 1 point 5 inch dia 4 feet long , hammer 1 kg with wooden handle durmut , hammer 0 point 5 kg with wooden handle durmut , brick line 30 mtr nylon dhaga , traveler brick mason 4 inch 305mm , sprit level , measuring tape 30 mtr steel , water bucket steel 13 inch dia , picks axes with chisel and point ends kudali 14 cp nominal weight 3 point 0 kg , lime brush best quality , painting brush 100mm , hacksaw frame large with blade 05 nos , galvanised iron pan mortar tasla comma 18 gauge 20 inch dia , wooden waterproof plywood thickness 12mm , nails various sizes , rammer earth with handle minimum weight 5 kg without handle , tester for electrician with plastic handle 150mm , electric drill machine heavy duty 500 watt electrical backup with battery and charger , drill bits hss 5mm comma 8mm and 10mm dia for electric drill machine , electric tile cutting machine with interchangable blades 05 nos , electrical sheet cutter machine with blade , puf rivet machine , centre punch 8mm dia best quality , plumbing tool kit , water level pipe 30 mtr long

CTN :45658174

07 Jul, 2026 17.77 Lacs

Rampur-Up - Uttar Pradesh

Tender For supply of supply 100mm m s pipe isi mark including flange nut bolt rubber , supply and fixing of jointing delivery line to main with material , supply and fixing 100mm size c i m s bend with all attachment complete , sf 100mm ci tee with all attachment , supply and laying of 100mm ms with flanges nut bolt packing etc , supply of 100mm dia of hand wheel operated with sluice valves destination including all taxes and insurance , supply of 100mm hand wheel ci double flanged valve operated with sluice valves destination including all taxes and insurance , supply and fixing 100mm size fire attend with pipe line attached , ci pipe 110mm leakage work complete , nalkup lowering and lifting work with include lifting machine fitting valves coupling and nut bolt , l e d plate , l e d sisa , sandf of 6 amp to 32 amp spmcb 10 ka c curve , supply and wiring of submains with 2 nos 25 sq mm frlsh pvc 1100v single core multistrand copper cable in existing conduit complete with all materials labour tandp as directed by engineer in charge , supply of electric power contactor 32 ampere 03 pole ac maximum power 21 w 400v , supply of electric power contactor 63 ampere 03 pole ac maximum power 21w 400v , supply of pvc electric tap grill roll multi colour , supply of onoff vintage bakelite light black switch 2way 06 amp to 16ampere 240 vol , sandf of 63 amp 4pole change over switch on 40x40x6mm angle iron frame including cost of labour tandp painting and material required for completion as per direction of engineer in charge , supply and laying of 06sqmm 2core al pvc insulated armoured cable 1100v in existing masonry open duct including proper earthing connection with clamps etc complete as directed by engineerincharge , supply and wiring of submains with 2 nos 06 sq mm 2core frlsh pvc 1100v single core multistrand copper cable in existing conduit complete with all material labour tandp as per engineer in charge

CTN :45651662

02 Jul, 2026 3.81 Lacs

Payyanur - Kerala

Tender For amrut 2.0 tranche iii-development of childrens park - supply and installation of play and gym equipments - detailed specification, garden bench- supply, installation and fixing of heavy duty outdoor garden bench (3 seater, 1.50 m length) with cast iron designed side frames, fabricated using high-strength cast iron end supports with decorative and corrosion-resistant finish, and seating arrangement consisting of 1.50 m long ergonomically designed seat and backrest made of treated hardwood/hdpe/uv-resistant recycled plastic slats of suitable thickness, fixed securely to the cast iron frames using galvanized or stainless steel fasteners. the cast iron frames shall be properly finished, free from sharp edges, and coated with rust-proof primer followed by outdoor-grade epoxy/pu paint or powder coating for enhanced durability under outdoor conditions. the bench shall be designed for heavy-duty public use with stable anti-tip structure and provision for firm anchoring to the rcc foundation/pedestal using suitable foundation bolts or embedded fixing arrangement as per manufacturer s specification. the rate shall include all materials, labour, transportation, loading, unloading, erection, fixing, anchoring, testing and commissioning complete in all respects. the item shall carry a minimum warranty of 2 years against manufacturing defects and shall be supplied and installed as directed by the engineer-in- charge, suitable for parks, open gyms and public garden spaces (excluding cost of concrte foundation), kids slider - supply, installation, testing and commissioning of outdoor children s play equipment frp & gi pipe combo double slide with frp roof, suitable for children up to 12 years of age, comprising a dual slide structure with two slides oriented in different directions, fabricated using isi-marked gi pipes conforming to is 1239 for main support frame with minimum 100 mm od and 3.0 mm thickness, and intermediate members of suitable diameter with minimum 2.5 3.0 mm thickness. the sliding surfaces shall be made of high-quality uv-resistant moulded frp with smooth finish and rounded edges for safe play, and provided with a durable frp roof canopy for protection from sun and rain. the structure shall include anti-skid climbing steps made of frp/hdpe or textured ms/steel treads, ergonomic handrails with uv-resistant coatings, and all welded joints shall be smoothly finished and free from sharp edges or projections. the entire assembly shall be treated with rust-proof pre-treatment, epoxy primer and outdoor-grade polyester powder coating of minimum 80 microns thickness for enhanced durability. the equipment shall be designed for safe use by children up to 12 years of age and installed on rcc m20/m25 concrete foundation blocks as per manufacturer s recommendation, using stainless steel or galvanized fasteners with proper anchoring. the rate shall include all materials, labour, transportation, unloading, erection, fixing, anchoring, testing, commissioning and all incidental works required for complete installation. the item shall carry a minimum warranty of 2 years against manufacturing defects and shall be supplied and installed complete as directed by the engineer-in-charge(excluding cost of concrte foundation), swing set- supply, installation, testing and commissioning of outdoor gi a-frame double swing set (two-seater) with chain suspension system, suitable for children up to 12 years of age, fabricated using isi-marked gi pipes conforming to is 1239 for the main a-frame structure with minimum 100 mm od and 3.0 mm thickness, and other supporting members of suitable diameter with minimum 2.5 3.0 mm thickness. the a-frame shall be designed for high stability and structural safety with properly braced side members and cross members, and provided with two child-safe swing seats made of hdpe/lldpe or frp with anti-skid surface and rounded edges for safety. the seats shall be suspended using heavy-duty galvanized steel chains of adequat

Cage Frame Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector