Latest cage Tenders | Government cage Tenders

Central Government/Public Sector

CTN :45664839

03 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of set of welded partition frame for bangladesh ac chair car coaches.note: make/manufacturer of raw material shall be m/s jsl or m/s sail., as per drawing: mp25paraccbang version 2, packing instruction: `packing condition of set of partition frame and procedure to achieve best possible protection during transportation: 1. surface preparation: - thoroughly clean the components to remove any dirt, grease or contaminants - apply a protective film, such as pvc or laser film or bubble sheet, to shield surfaces from scratches and environmental factor. 2. packing materials: - wooden crates: construct sturdy wooden cage tailored to the component's dimensions. - steel strapping: utilize rust-proof steel straps to securely bundle components, preventing movement during transit. 3. moisture barrier: - incorporate moisture-proof materials, such as plasticfilm or water proof ability paper, to guard against corrosion. 4. componentarrangement: - place components on wooden pallets or within custom-designed supports to distribute weight evenly and prevent deformation. - ensure that no part of the component extends beyond the protective packaging to avoid exposure to potential damage. 5. securing the components: - use steel straps or ropes to fimly anchor the components within the wooden crate, minimizing internal movement. - for added stability, employ bracing or cushioning materials, such as foam pads or corrugated inserts, to fill voids and absorb shocks. - hardware items to be suitably packed separately inside the crate. 6. labeling and documentation: - clearly label each package with essential information, including pl no. specifications, details of each set with qty. and also keep one copy inside ot the crate, weight, handling instructions and firm's & destination details. 7. loading onto trailer/lorry/truck/transport: - strategically position the packaged components within the truck/suitable to maintain balance and prevent shifting during transit. - secure the packages to the container's structure using lashing ties or additional bracing as needed. 8. final inspection and sealing: - conduct a thorough inspection to verify that all components are securely packed and that packaging materials are intact. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45664895

14 Jul, 2026 NA

Hubli - Karnataka

Tender For supply of service connector of 2.5 sq.mm cross section for connecting railway carriage fan and light fittings as per item no.wago make or equivalent as per the technical data: (1) type of wiring: side-entry wiring. (2) total number of connection points: 2. (3) total number of potentials: 1. (4) connection technology: cage clamp. (5) actuation type: push-in. (6) connectable conductor material: copper.(7) solid conductor: 0.5 - 2.5 mm 2/20 - 16awg. (8) fine stranded conductor: 0.5 - 2.5 mm 2/20 - 16awg. (9) strip length: 9 - 11mm/ 0.35 - 0.43 inch. (10) width: 8mm/ 0.315 inch. (11) height: 15.5mm/ 0.61 inch. (12) depth: 42 mm/ 1.654 inch. (13) colour: grey. (14) fire load (mj): 0.099 (mj). (15) weight(g): 5(g). [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

corporations/Associations/Others

CTN :45653564

30 Jun, 2026 NA

Ahmedabad - Gujarat

Tender For auction sale of gear flywheel ring,new obsolete propeller shaft,new obsolete cooler plate,new obsolete stiffner plate cyl.block,new obsolete withdrawal plate,new obsolete drop arm (bigg size),new obsolete drop arm (small size),new obsolete splined end all type (small),new obsolete clutch operating lever (small),new obsolete plug expanstion for cyl. block,new obsolete main bearing r/s 1st (hino),new obsolete main brg.c/s u/s-0.50mm (hino),new obsolete crank shaft for bs-iii eng.,new obsolete valve intake (altto*4201911)for cyl.head bs-iii,new obsolete valve intake for cyl.hd bs-iii,new obsolete wheel stud,new obsolete all type rolar cage for gear,new obsolete splined end (bigg),new obsolete camshaft,new obsolete front spring,new obsolete diesel filter insert (1.1 liter coil) (mico),new obsolete all type propeler midshaft with nut,new obsolete all type center bearing midshaft

Central Government/Public Sector

CTN :45656874

03 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of matl code - 7502g0000100-plummer block sn520 , matl code - 7508b0200030-plummer block p206 , matl code - 7508b0200040-linear bush bearing lm12uuop , matl code - 550000003830-spherical roller bearing 22220e , matl code - 550000003730-bearing 22213 e1am brass cage , matl code - 550000000440-ball bearing 6307 , matl code - 550000000940-bearing 6308 , matl code - 7501a0100119-ball bearing 6312 , matl code - 550000005730-bearing no - 6205zz , matl code - 550000004650-bearing 6206-2-rs , matl code - 550000000430-ball bearing 6207 zz, size- 35 x72x17 , matl code - 550000002350-bearing 30312 , matl code - 550000002540-bearing 30205 , matl code - 7508b0200050-tapered roller bearing lm 670 , matl code - 550000001090-bearing 6014 , matl code - 550000000490- bearing 6306 zz

Central Government/Public Sector

CTN :45434085

25 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For bid to ras supply of double row spherical roller bearing, bearing no. 23060 (size id 300mm x od 460mm x118 mm width) cage , double row spherical roller bearing, bearing no. 22226 (size id 130mm x od 230mm x64 mm width) cage s

Central Government/Public Sector

CTN :45138886

27 Jun, 2026 NA

Malanjahknd - Madhya Pradesh

Tender For corrigendum : supply of 010400329 3 phase 6 pole squirrel cage lt induction motor ie3, frame 200l, rated voltage-415vac, 50h , 010400332 3 phase 4 pole squirrel cage lt induction motor ie3, frame 280s, rated voltage-415vac, 50h

State Government

CTN :45646140

07 Jul, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - supplying , installation, testing and commissioning of vertical turbine pump set with ss impeller capable to discharge 126 m3/hr.against total head of 50 m, (make kirloskar/jyoti/wilo-mather&platt/wpil) coupled with suitable capacity vertical hollow shaft/solid shaft squirrel cage induction motor , rating of motor 20% more bhp than that of pump (make kirloskar /abb /cgl/ siemens) operated on 415 +/- 10% volt, 3 phase , 50 c/s a.c supply , ie3 type as per is:325 and iec:63400-ihaving speed 1450 rpm,with heavy duty m.s. column assembly with ss line shaft and each coloumn of 5 feet length including cost of supplying , fitting and fixing of all required accessories such as cidf sluice valve-1 set, cidf nr valve-1 set, pressure gauge-1 no, strainer-1 no, m.s. channel base plate etc. all complete including cost of taken out existing old pumpset., supplying and installation of fasd starter suitable for above mentioned vt pumpset make lk/bch/schneider., supplying and laying of 25 mm2 , 1.1 kv, 3 core pvc insulated unarmoured copper cable make polycab/kei/gloster, from starter to motor., supplying, installation testing and commissioning of horizontal split casing centrifugal pump set with bronze impeller having discharge 126 m3/hr. against total head of 35 m, (make - kirloskar/jyoti/wilo-mather&platt/wpil), coupled with suitable capacity squirrel cage induction motor, rating of motor 20% more bhp than that of pump(make kirloskar /abb /cgl/ siemens) ,tefc, ie3 type as per is:325 and iec:63400-ihaving speed 1450 rpm,operated on 415 +/- 10% volt, 3 phase , 50 c/s a.c supply, mounted on a commonm.s. base plate including cost of supplying , fitting and fixing of all required accessories such as cidf sluice valve-1 set, cidf nr valve-1 set, pressure gauge-1 no, foot valve-1no, etc. all complete including cost of taken out existing old pumpset., supplying and installation of fasd starter suitable for above mentioned c/f pumpset make lk/bch/schneider., supplying and laying of 16 mm2 , 1.1 kv, 3 core pvc insulated unarmoured copper cable make polycab/kei/gloster, from starter to motor., cost towards complete repairing of control panel at intake well with changing of damaged parts such as :-1.150 amp tpn mccb,50 ka -1 no. as incoming feeder.2. 75 amp tp mccb, 50 ka-2no as outgoing feeder.3.star delta timer-2nos(one for each starter) 4. 32 amp switch fuse unit -01 no. for internal and external light load.5. (0-500 v) volt meter-01 no., ampere meter-01 no.,three phase indicator lamp,powder coating paint,push button on/off,on/off/trip indicator lamp,wiring,etc as per required and testing on full load ., cost towards providing all labour, tools and technicians for taken out and dismantling 40 hp vt p/set with bowl assembly, 6" dia. coloumn pipe and line shaft etc all complete., cost towards dismantling and repairing of complete bowl assembly., cost towards making supplying and fitting s.s. top shaft as per size and sample., cost towards making supplying and fitting of c.i. spider bearing having od 6.5" with rubber bush as per size and sample., cost towards lowering of vt p/set. after complete repairing and assembling works., cost towards complete repairing of control panel at clear water pump house with changing of damaged parts such as :-1.125 amp tpn mccb,50 ka -1 no. as incoming feeder.2. 63 amp tp mccb, 50 ka-2no as outgoing feeder.3.star delta timer-2nos(one for each starter) 4. 32 amp switch fuse unit -01 no. for internal and external light load.5. (0-500 v) volt meter-01 no., ampere meter-01 no.,three phase indicator lamp,powder coating paint,push button on/off,on/off/trip indicator lamp,wiring,etc as per required and testing on full load .

corporations/Associations/Others

CTN :45658113

07 Jul, 2026 42.38 Lacs

Jhansi - Uttar Pradesh

Tender For supply of 28310103 transmission pump pn 125hm01004 , 28310101 turbo charger kkk pn.51z8100534 , 28310111 service kit 51z9900906 bd155 , 28310111 element 524300450001 beml , 28310103 tube 125ph02431 bd155 , 28310104 valve assy 125 co 02257 , 28310105 nut 116fd11443 , 310105 floting seal kit 1250fd02038 , 28310111 hose chh1101610 , 28310104 steering clutch assy 125cso2105 , 28310104 cage bearing 125fd42052 , 28310104 steering pump assembly 125hm010

State Government

CTN :45382895

01 Jul, 2026 21.14 Lacs

Hisar - Haryana

Tender For corrigendum : provision of staircases in place of existing cage ladders and painting of staircases at various buildings at rgtpp, khedar, hisar.

Central Government And Public Sector

CTN :45664047

15 Jul, 2026 NA

Bhilai - Chhattisgarh

Tender For supply of bearing, skf no. 3306a or equivalent having steel cage for special repair mph of three phase locomotives. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Cage Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors