Tender For auction sale of waste cartoon,ms strips,scrap ht strand steel,scrap reinforcement steel ms from works products small cut,ms paking striptmt bitsturning rollthreading burrbinding wire etc,scrap structural steel from works / products,ht steel strand
Tender For street light accessories and phase wire work in losal area - work, supplying and drawing of xlpe insulated lt aerial bunched aluminium conductor cable confirming to is 14255/1995 and is 398 (pt-4)/ 1994 and as per discom specs. on existing cross arms through i hook with all necessary t&p required including binding and twisting etc. complete in all respect as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a"attached with this bsr ., 1 x 25 sq. mm. + 1x25 sq. mm. (insulated), supply and fixing of following lt supporting accessories with nut bolt & clamps made out as per standard discoms specifications with two coats of red oxide and two coats of aluminium paint etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr, suspension clamp with eye hook & pole clamp, dead end clamp with eye hook & pole clamp, p & fixing powder coated crca sheet enclosures on existing angle iron frame by means of nuts and bolts and making holes , din rail etc. as required.for additional technical parameters of product / work refer annexure a attached with this bsr, 2.0 mm thick, providing & fixing of ac operated heavy duty 230 /440 volt power contactor as per pwd specification for electrical works, isi marked is/iec 60947-4-1 : 2000 having provision of mechanical interlocking, auxilary contacts, din rail mounting type including making connections, testing etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 4 pole power contactors with following ac 1 rating 63 amp, providing & fixing of mechanical / digital time switch having following day / week programme and minimum 100 hours reserve and ac1 rating of 16-20 amperes including making connection, programming conforming to iec 60730-1 and 60730-2-7 etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., one day & week reserve (analog type ), sitc of 3 /4 pole current limiting moulded case circuit breaker (mccb) made of flame retardent & heat resistant material having following current rating, short circuit breaking capacity at 440/415 v, 50 hz; o/l & s/c settings , conforming to is/iec 60947 p -2 :2003 with front face and centralised adjustable, trip free mechanisum, true contact position indicator, line load interchangeability, designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree, pollution degree 3, having positive isolation capability, push (test) to trip, trip time less then 10 ms under s/c condition, breaking capacity ics = 100% icu. u imp =8 kv, rated insulation voltage 690 v. provision for uvr , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connections etc. as required.oem shall have submit nabl / cpri / erda accrediated lab type test certificate before execution all as per pre approved by engineer in-charge. for additional technical parameters of product/ work refer annexure a attached with this bsr, 4 pole mccb with thermal magnetic release up to 100 amp , 10 ka, fixed o/l & fixed s/c setting, pipe earthing as per is:3043- 1987 with 3.0 mtr. long, 40 mm dia. b class g.i. pipe is: 1239 (part-1) 2004, equivalent to bs : 1387 with perforated holes of 12 mm dia ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and heavy duty weather proof poly-propylene earth pit chamber with lockable jam free lid suitable for safe working load 5000 kg or more of size top dia. 225 to 260 mm, bottom dia 300 to 350mm. and height 250 to 300 mm. and embodying the pipe compl
Tender For supply of games and sports equipment and uniform for jawahar navodaya vidyalaya akola - games and sports equipment and uniform, hand ball nivia synthetic handball women size 2 handball (standard, pack of 1), hand ball-spartan spirit high tech men handball (standard, pack of 1, multicolor), hand ball-nivia ultima handball (standard, pack of 1), hand bal-nivia trainer handball (standard, pack of 1, stop watch nivia js 307, knee support leader sportz leader sportz knee caps for unisex. whether youre hitting the gym or dealing with knee pain, our premium knee support products offer effective relief and stability (medium), whistle-whistle, 2 packs sports whistles with lanyard & mouth grip, loud crisp sound, black plastic whistles ideal for coaches, referees, and officials, hocky net-franklin sports kids mini street hockey goal - portable folding steel floorball goal - 36" x 24", movable volleyball pole-volleyball poles heavy-duty, adjustable & professional sports equipmentwe are a leading manufacturer and supplier of volleyball poles in india, offering a wide range of indoor and outdoor volleyball post systems designed for schools, colleges, clubs, sports complexes, and professional tournaments. our volleyball poles are built for strength, durability, and precision, ensuring stable net tension and safe gameplay for players of all levels., volleyball net - nivia " knotless volleyball net" with metal wire rope volleyball net (black), volley ball-nivia pu 5000 volleyball size 4 - multicolour, volley ball-nivia kross world vollyball size 4 - multicolour, volley ball-aivin attract volleyball - size: 4 (standard, pack of 1), volleyball antenna-nivia, measuring tape-freemans fibreglass open reel measurement tape (50 m), measuring tape-freemans top line 13mm measuring tape, length: 50 m, ft50, chess clock-chess armory digital chess clock - portable timer with tournament and bonus time features, foot ball-nivia simbolo football size 5 - white orange, cosco cosco premier football size 4 - white black, foot ball net -nivia jh-z003 football net, yonex yonex mavis 350 shuttle cock - green, badminton pole, badminton ne-taxg new goal nylon badminton net - red, yonex yonex zr 100 light badminton racket - black, cosco cosco inova basketball size 7- multicolor, cosco cosco rubber pulse basketball size 7 - multicolor, nivia europa basketball size 7 - orange, jj jonex jj jonex heavy basketball ring with cotton net & screw- multicolour, starting block championship, starting block steel-application typeswimming poolfootplate typefixednumber of footplates1colormulti colorusage/applicationin trackweight1.4 kgbrandhindmaterialsteelfinishingpowder coatedcountry of originmade in indiaavailabilityin stockview in hindi , high jump standard supremeuprights made of special aluminium telescopic pillar construction profiles, which are bolted with 18" square roll away steel base and includes two brackets to place the crossbar, heavy duty construction for maximum stability. comes un-assembled and can be assembled very easily by screwing four screws. height adjustment from 160cm to 270cm., amber athletic gear cast iron shot put weights 1kg - ideal for track & field training - color may vary., amber athletic gear cast iron shot put weights 1.5 kg - ideal for track & field training - color may vary., gymfreak pack of 1 bamboo javelin for practice 8 ft. aluminium tipped javelin for boys, girls, women (240 cm 1000 g), gymfreak pack of 1 bamboo javelin for practice 8 ft. aluminium tipped javelin for girls, (240 cm 1000 g), nelco sp0001610001 wooden discus throw disc (1.75 kg), nelco lo spin competition discus - 0.75 kg to 2.00 kg, stag iconic stag iconic indoor/outdoor economy table tennis net, stag iconic stag iconic super mini table tennis (t.t) table| portable indoor ping pong super mini table for kids fun recreational play| included with tt rackets and balls| all in a briefcase-size foldable design, stag iconic era 150 indoor table tennis table | p
Tender For auction sale of others - scrap released industrial waste products unserviceable for railway use 1 coal /coke ashes debris steam coal and hard coke dust scrap pieces of u/s fire bricks 2 broken piece of plain and color glass mirror porcelain washbasin commode crockery item etc.3 u/s cotton rag canvas released from coaches old unusable hand gloves aprons etc 4 u/s rubber items window sealing rubber foam pieces gas rubber hose pipes shutter felts damaged & condemned rubber hose and pvc pipe pieces damaged torn vacuum hose pipes without universal couplings small broken pieces of rubber released from roof of the coaches & glass wool 5 unusable timber plywood wooden scrap pieces of compreg ply broken slates pieces of berth shutter panel etc scrap broken pieces of released packing wood timber jolly board condemned wooden seats without rexene & ferrous fittings wood shavings mixed with sand & rubbish 6 released packing material rubber fibre wooden polythene bags gunny bags card board paper puttah gatta thermocole etc. broken and u/s pieces of asbestos cement sheets released from shops 7 unserviceable old lp sheet including pop rivet seat berth number plate unuseable off cuts of new lp sheet unusable pieces of limpet /nftc sheet 8 floor sweeping consisting of sand mud mud muck scrap paper shrubs tree branches including dried grass & leaves coach-rust rusty nails screws and washers u/s aluminum rivets mixed with sweepings and ashes from burn material mud and muck includes unserviceable pieces of stones boulders broken concrete foundations and u/s pieces of other bricks oily greasy rags oily dirt and mud mixed with rubbish heaps excluding sludge oil 9 unserviceable off-cuts of fresh rexene pvc sheet coir recron foam released and unserviceable rexene pvc sheet coir recron foam 10 unserviceable frp products like window shutters louvers inlay lavatory wall protectors wash basin fish tails banjo shutter front cover or axle box mouldings 11 u/s nylon plastic bushes nylon wire rope and other nylon items broken welding hand screen helmet face shield 12 u/s bakelite bakelite box with screws broken and condermned bakelite cover of tumber switch and fuse without non-ferrous fitting mcb with embedded material except aluminum and copper, ceramic pieces plastic pvc sheet and sleeves broken pieces of electric switches battery floats flexible pipes unserviceable broken tube lights and bulbs fuse without non-ferrous fittings broken damaged pieces of insulating material 13 engineering garbage not required by iow and generated inside workshop like tree branches loose earth etc 14 following unserviceable items released from poh activities -bp and fp houses with end ferrous parts, unserviceable buffer pads and draft pads, frp main door embedded with ferrous window bars handle latch etc frp window shutters with embedded ferrous material, unserviceable lavatory door vestibule door fiied with latch/handle and ferrous mouldings etc, hdpe commode chute with ferrous bracket and supporting ring,plastic spool with end pieces of filler wire. 15 ferrous pieces mixed with rubbish weighing not more than 500gms 16 any item of industrial waste not covered above as advised in writing by the site engineer in charge. as is where is basis. loading by purchase. location of material : site c i.e. 100 kld etp plant/lower parel workshop/ maharashtra. custodian :sse/ys/pl(total approximate weight 50 mt.) note 1)the above items are expected generation of various items in the workshop. the railway does not guarantee availability of all types of industrial waste at all times in the same proportion some item may be even zero 2)the railway will not accept any claim for availability of any specific items or their quantities 3)no material other than above shall be permitted to be lifted 4)mode of delivery will be in metric tonne. no sorting & pick and choose of material will be allowed.
Tender For auction sale of scrap galvalized tower parts- scrap from works / products,scrap conductor aluminium cut pieces 100 percent aluminium,scrap structural steel ms from works / products used structure wire rope,scrap earth wire,scrap pipe ms from works / products larger in size,ms angle,scrap miscellaneous ms from works / products
Tender For supply, installation, testing and commissioning of elv equipment in seminar hall and class room at government ayurved, yoga natural chikitsa integrated college, kekri district ajmer - based on electric bsr 2022, s&f following sizes (dia.) of isi marked virgin material mms ( is:9537 p - iii ) pvc conduit along with isi marked (is:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure a attached with this bsr, 25 mm, 32 mm, providing & fixing of iso certified company made virgin material pvc trunking system as per pwd specification for electrical works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . the trunking system shall have adaptable system for modular type rj 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. oem shall have submit nabl accrediated /cpet lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 32mm x 20mm, 100/105mm x 50mm, supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp (unshielded twisted pair), category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi/tia/eia-568 , the copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by pvc jacket. certified performance in a 4-connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms/pvc conduits/casing capping including making connections to information outlets and patch panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., supply and installation of unsheilded/360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6/6a application complying to latest ammendments, according. to cat. 6/6a channel, it should support channel as well as components requirements of cat.6/6a standards at frequencies of up to 250 to 500 mhz. cat 6/6a unshielded/shielded jack should be suitable to terminate 4 pair, 23/24 awg solid/stranded wire diameters, using 100 ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603-7-4 and complied with ansi/tia/eia 568 c.2 standard. jack should be rj11,rj12 & rj45 compatible. should support ethernet 1.2 gb/s atm,digital video and broadband/baseband analog video, voice over internet protocal (voip) specifications in existing modular/ms boxes along with necessory connections as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., cat 6, un-sheilded information outlet, supply & fixing of square faceplate for flush / surface mount information outlets single/dual or quad aperture , material should be pc+abs body, suitable for rj45 unshielded/shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., single aperture, providing & fixing of wiring accessories oem fabricated f
Tender For sitc of elv equipment in seminar hall and class room at government ayurved, yoga natural chikitsa integrated college, kekri district ajmer -sitc of elv equipment - based on electric bsr 2022, s&f following sizes (dia.) of isi marked virgin material mms ( is:9537 p - iii ) pvc conduit along with isi marked (is:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr, 25 mm, 32 mm, providing & fixing of iso certified company made virgin material pvc trunking system as per pwd specification for electrical works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . the trunking system shall have adaptable system for modular type rj 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. oem shall have submit nabl accrediated /cpet lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 32mm x 20mm, 100/105mm x 50mm, supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp (unshielded twisted pair), category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi/tia/eia-568 , the copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by pvc jacket. certified performance in a 4-connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms/pvc conduits/casing capping including making connections to information outlets and patch panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , supply and installation of unsheilded/360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6/6a application complying to latest ammendments, according. to cat. 6/6a channel, it should support channel as well as components requirements of cat.6/6a standards at frequencies of up to 250 to 500 mhz. cat 6/6a unshielded/shielded jack should be suitable to terminate 4 pair, 23/24 awg solid/stranded wire diameters, using 100 ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603-7-4 and complied with ansi/tia/eia 568 c.2 standard. jack should be rj11,rj12 & rj45 compatible. should support ethernet 1.2 gb/s atm,digital video and broadband/baseband analog video, voice over internet protocal (voip) specifications in existing modular/ms boxes along with necessory connections as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , cat 6, un-sheilded information outlet, supply & fixing of square faceplate for flush / surface mount information outlets single/dual or quad aperture , material should be pc+abs body, suitable for rj45 unshielded/shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , single aperture, providing & fixing of wiring accessories oem fabricated following size g
Tender For providing of customized amc/cmc for pre-owned products - customized amc/cmc for new products providing installing commissioning and testing set of 18w led bulb with holder and wire with all accessories as per list attached in scope of work; --; comprehensive mai..
Tender For corrigendum : procurement of 31 types of x-ray films and products for inhs kalyani through pa - conclusion of price agreement for 31 in number items for x-ray films & products for a period of two years at inhs kalyani - x-ray films & products, x-ray detechable gauze swabs, 12 plies, width-10.0cm+0.5cm, length-10.0cm+0.5cm, x-ray detechable gauze swabs, 12 plies, width-7.5cm+0.5cm, length-10.0cm+0.5cm, x-ray detechable gauze swabs, 12 plies, width-30.0cm+1.0cm, length-10.0cm+1.0cm, judkins left angiography catheter-assorted sizes, judkins right angiography catheter-assorted sizes, leur lock syringe 10ml, pigtali catheter-assorted sizes, ptfe angiography guide wire 0.035x150cm j tips, ptfe angiography guide wire 0.035x260cmextra stiff", ptfe angiography guide wire 0.035x260cm j tips", 6f long sheath 55cm, 6f radial sheath, 7f long sheath 55cm, angioseal, c-arm cover (2 pcs for top and bottom) compatible with ge igs 320 cathlab system, syringe disposable 20ml, syringe disposable 50ml, syringe disposable, platic sterile, 10ml with needle, c-arm cover (3pcs for complete "c") compatible with ge igs 320 cathlab system, femoral sheath 6f 11cm, femoral sheath 7f 11cm, micro puncture set, surgical angiography drapes with open for radial and femoral access, syringe disposable, plastic, sterile, 2ml with needle, syringe disposable, plastic, sterile, 5ml with needle, terumo angiography guide wire 0.035"x150cm j tip, pressure monitoring line 100cm/200cm (male/female), anti-embolism stockings with graduated compression- thigh high large class i (18-21mmhg), anti-embolism stockings with graduated compression- thigh high medium class i (18-21mmhg), anti-embolism stockings with graduated compression- thigh high small class i (18-21mmhg), spinal needle-assorted sizes
Tender For corrigendum : providing of customized amc/cmc for pre-owned products - customized amc/cmc for pre-owned products - providing installing and commissioning of 36w street light and wire as per specifications attached in scope of work; --; comprehensive maintenance contract (cmc);..