Latest cam shaft gear Tenders | Government cam shaft gear Tenders

Central Government/Public Sector

CTN :45103517

19 May, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For supply of set of spare part of crowned gear coupling for wap- 5 locos consisting : (1) locking disc as per mackiel part no. 09 or zf part no. 5080302458,qty- 02 nos. (2) set of locking ring as per mackiel part no. 05 or zf part no. 5080302460, qty- 02 nos. (3) adopter ring as per mackiel part no. 06 or zf part no. 5080302459, qty - 02 nos. (4) cover as per mackiel part no. 08 or zf part no. 5080302457, qty- 02 nos [ warranty period: 30 monthsafter the date of delivery ]

Central Government/Public Sector

CTN :45120674

20 May, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply, installation and commissioning of axle turning lathe machine model no. hd 50c make-beco gear box spare parts as per attached annexure. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45094170

16 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of spare parts-impact machines-50 items - bevel gear for machine model pnc-4 m1 o/a- 200/13/868 3pn008343a, bevel gear (crankshaft) for machine model pnc-4 m1 o/a-200/13/868 3pn008344a, mataflax coupling for machine model pnc-4 m1 , o/a-200/13/868 dbz163 4pn-004068a, taper fit coupling, spline shaft to mataflax for machinemodel pnc-4 m1 , o/a- 200/13/868 - spline shaft 3pn-004031awith tapered sleevv 3pn-004032, toothed coupling , spline shaft to bevel gear for machine model pnc 4m1 o/a 200/13/868 -radial shaft 3pn 008403bwith bush 4pn-125029, linear bearing complete (set of cage, housing &rollers) for slide for machine model pnc-4 m1 -o/a 200/13/868, cam box assembly fitted with proximity switches, htdtiming belt, htd driven pulley with flange - 2 nos. for machine model pnc-4 m1 , o/a- 200/13/868, clutch plate with liners, for machine model- pnc-4 m1o/a- 200/13/868, brake plate with liners for machine model- pnc-4 m1 o/a- 200/13/868 - 3pn-004031a/3pn-004032, spline shaft with taper sleev for for machine model pnc-4 m1 -o/a 200/13/868 3pn-004031a/3pn-004032, connecting rod-rear ,jointless, matl- c-45, forged steel, complete intermediate shaft unit- indexing mechanism, pinion shaft assembly, for intermediate shaft unit, sensor cum micro switch for reverse setting/turnover, oil seal 70 x 90 x10 for machine model pnc-12.5 -o/a 200-06-606, bevel gear for machine model pnc-12.5 o/a- 200-06-606, bevel gear (crank shaft) for machine model pnc-12.5, cam box assembly fitted with 03 nos. proximity switches, flat belt ntb extremultus lg-20 -2110 x30 endless, clutch plate with liners for machine model- pnc-12.5, brake plate with liners for machine model- pnc-12.5 -o/a, connecting rod (rear), jointless matl c-45 forged, spindle for main gear z4 for indexing, linear bearing complete (set of cage, housing & rollers, spline shaft with taper sleev for machine model pnc-12.5, mataflax coupling for machine model pnc-12.5 o/a 200-09, taper fit coupling, spline shaft to mataflax for machine, toothed coupling, spline shaft to bevel gear, rocker arm for machine model pnc-12.5 o/a- 200-09-703, adaptor shaft for machine model pnc-12.5 o/a- 200-09-703, complete intermediate shaft unit- indexing mechanism, pinion shaft assembly consisitng of- worm shaft - 1 no, sensor cum micro switch for reverse setting/turnover, ball(adjusting) screw (connecting front connecting, connecting rod-rear jointless matl- c-45 forged, spindle for main gear z4 for indexing for machine, crank shaft for machine model pnc-12.5 o/a 200-92-878, cam box assembly fitted with 03 nos. proximity switches, complete intermediate shaft unit- indexing mechanism, pinion shaft assembly, for intermediate shaft unit, sensor cum micro switch for reverse setting/turnover, bevel gear for ameteep model pnc-12.5, o/a no. 200.92.878, bevel gear (crank shaft) ameteep model pnc-12.5, o/a no, clutch plate with liners for machine model- pnc-12.5, brake plate with liners for machine model- pnc-12.5 -, spline shaft with taper sleev for machine model pnc-12.5, mataflax coupling for machine model pnc-12.5, taper fit coupling, spline shaft to mataflax, toothed coupling, spline shaft to bevel gear, rocker arm for machine model pnc-12.5 o/a- 200.92.878

Central Government/Public Sector

CTN :45099566

27 May, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of 4020 pump gear box - spare parts , dtsn 80 pump gear box - spare parts , nd144 pump gear box - spare parts , nr 31 pump gear box - spare parts

Central Government/Public Sector

CTN :45110709

15 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector, motorman driver seat base with bend, hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,erclips,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger, safety strip, iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel), impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: a row bin 1 & 2

Central Government/Public Sector

CTN :45072514

14 May, 2026 1.50 Lacs

Rupnagar - Punjab

Tender For supply of spare parts for radiant equipment company 4tph spp d d - rubberized canvas elevator belt 6 inch 4 ply , hdpe bucket 5 inch , long bichhu bolt nnu with washer , pvc nylon sleeve gear coupling m-38 , hdpe bucket 4.5 inch , long rubberized canvas elevator belt 5 inch 4 ply , hdpe bucket 4 inch , pvc nylon sleeve gear coupling m-28 , belt conveyor with joiner , feed control rod for reminant collection system , feed control roller for reminent collection system , conveyor skirting canvas belt , spring pulley for rec seed indented cylinder , hanger excel without bearing for seed gravity separator , hanger bush for seed gravity separator , cam rubber for seed gravity separator , hanger bush for vegetable seed plant seed gravity separator , hanger excel without bearing for vegetable seed plant seed gravity separator , duct suction pipe dia 4 inch , clamp ) /bid number : gem/2026/b/7477629 * /dated: 04-05-2026 & & / bid document 1 / 20

Central Government/Public Sector

CTN :45072522

25 May, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of tata 407 spare parts e e - ball bearing , roller cage , synchro ring , synchronising , carrier , retention , needle cage , synchro cone , circlip set , coller bush , roller needle cage , synchro ring 4th , needle cage ckewed , internal circlip 40x175n , spacer rigear , reverse idler gear , taper roller brg 30x72x20 , synchro ring lock , gasket , pitfe seal 57399 rh , pitfe seal 684810 lh , assy clutch , clutch disc , ball bearing fly wheel , clutch release bearing , pump fuel assy complete , fuel filter primery , fuel filter secondery , head gasket set , seal crankshaft front , syncro ring double cone 2nd sp , annabond tube 250 gm , old cloth , junk cleaner 200 ml , clutch slave cylinder , assy vaccum booster , tendom master cylinder , wiper blade set , pull and push switch , insulation tape , arc welding rod 10 no size , tapped cover gasket , clutch cylinder upper , benjo washer 19 no size ) /bid number : gem/2026/b/7499283 * /dated: 04-05-2026 & & / bid document 1 / 34

Central Government / Public Sector

CTN :45090945

12 May, 2026 NA

Vijayawada - Andhra Pradesh

Tender For supply of set of 24 v starter motor and its spare parts for tipper lorry of make; tata, model no ;sk 1613tc/42 box tipper ,2016 manufacturing. set consisting of 06 items. 1. self motor 24v, part no. 6024401a-01 no. 2).field coil, part no-26248207 -03 nos. 3).solenoid switch, part no-26248916-03 nos. 4). armature, part no-262402989-03 nos. 5). carbon brush, part no-26242473 -10 nos. 6). drive gear bendix, part no-26247140-02 nos. [ warranty period: 6 months after the date of delivery ]

CTN :45065815

11 May, 2026 4.21 Lacs

Baran - Rajasthan

Tender For requirement of spares and one unit of power take of units pto make m/s syall engineering for both fire tenders. - heavy duty full torque pto units , suitable for fitment in fire tender on al, 1616 chassis having gear ratio of 1:1.27 x input, at ctpp, chhabra. , complete removal of existing pto unit, and complete fitting and testing of 01no. performance of new installed pto at ctрр, chhabra. , spare for heavy duty full torque pto units fitment in fire tender on al, 1616 chassis havin 1:1.27 x input, complete removal of existing , transmission shaft top , counter shaft , main shaft bottom (out put) , sliding gear , intermediate gear , main drive gear (in-put) , sliding dog , selector spindle top , selector spindle bottom , selector fork top , selector fork bottom , selector spring , selector ball 10mm , end cap , oil seal housing bottom (output) , oil seal housing top (output) , front bearing up support (output) , distance piece-lon (counter shaft) , oil level pipe (dip) , oil dip stick , retaining washer (10x6x56) , retaining washer (10x6x45) , selector top arm , selector arm bottom , rajkaj ref , control lever , cooling coil , sleeves , union nuts of brass , input flange coupling , output flange top/coupling , circlip plain inner (85x3) , circlip inner (100x3) , circlip inner (90x3) , circlip inner (62x1.72) , circlip inner (47x1.75) , circlip outer (45x1.75) , circlip inner (45x1.75) , dowel pin (8x30)

CTN :45083164

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - p.l no. 98050047.scrap c & w fittings consisting of bolster hanger ,anchor link, c buffer flange, control arm assembly, equalising stay, brake head, striker block, face plate, locking plate, spare parts of brake cylinder, crank shaft of main compressor, knuckle, cbc, cbc coupler, axle box , laminated pole shoe, housing, bcn door, tension rod assembly, rear cover, suspension tube, brake beam, dash pot, buffer ,oil thrower, top casting, brake cylinder(ferrous) ,bottom casting, lower spring beam, oxycut ferrous ball bearing, miscellaneousllaneous spares parts of valve & cock, draft pad, screw coupling, yoke , hand bar, pull road, cam shaft, axle cap, ferrous bearing of sorts and sizes, ferrous part of different type of valve, collar, ring, racer, socket head, jumper head, felt ring, ms cylinder, buffer casing, draw bar hook, hanger block, chain bolt, chute plate, wear plate, flap plate, draft gear, gear, pinion, impeller, schaku coupler parts, traction motor parts, nut bolts, pin, icf bogie component and miscellaneousllaneous ferrous etc. as available in lot, except any non ferrous.qty-145mt. location-east of vm road in ncb-12.

Cam Shaft Gear Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors