Latest camber Tenders | Government camber Tenders

Central Government/Public Sector

CTN :45731469

29 Jul, 2026 NA

Bengaluru - Karnataka

Tender For supply of set of retaining rings (pivot ring & housing ring) for housing of traction bar. set consistingof (1) pivot ring as per clw drg. no.1209.01.313-005, alt-2 (ref. abb drg. no. ia016-00261 rev-3) qty: 04 nos/set. and (2) housing ring as per clw drg.no.1209.01.313-004, alt-2 (ref. abb drg. no. ia016-0262, rev-3). qty: 04 nos/set [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45722724

06 Jul, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap and unserviceable condemned heavy melting items such as hook draw bar screw coupling parts , control arms and lower and upper cover traction centre ,coupler cutting parts such as side bearer assembly, yoke , front plate bearing plate, rear plate , align screw, leaf spring ,carrier assemble and scrap tm m.s items such as t m rotor parts, rotor core lamination ,end sheild , m s pinion , transmeter wheels ,msu ,leg chain string , alternator shaft,casing blower casing,front chember,piston,plate,oil pump part,darft gear, pinion,heavy loco parts,tsc exhaust chamber parts,liner,cbc housing casing, power assembly parts ,head ,joints,knucles, roll bar link,gear case cover , con rod knuckle bc parts , dv parts ,caliber & cylinder, plunger,and other types of coupling and heavy melting items etc. in dismenteled and broken condition. scrap items with or without minor nf/ss, rubber etc attachments etc (qty approx).

Central Government/Public Sector

CTN :45727657

31 Jul, 2026 NA

Bengaluru - Karnataka

Tender For supply of igbt based 3-phase drive propulsion equipments comprising of traction converters, auxiliary converters, vehicle control units (vcu) for complete three phase locomotive along with physical medium i.e. esd/emd/ofg for multi functional vehicle bus (mvb) to inter-connect all the bus stations as per iec-61375, terminal brackets, bus bar linksand copper braids required for connection between main transformer and traction converters, auxiliary converters, interfacing connectors, cables and cable looms with connectors required for connection from vcu1/2 to sb1/2 panel, traction motor speed sensors, complete assembled and wired panel c fitted with gdriver display unit(s) and interface for both cab, as per following specifications: (i) rdso/2008/el/spec/0071,rev.5 forigbt based 3-phase drive propulsion equipment (ii) clw/es/3/0528 alt-a for tm speed sensor for igbt traction converter (iii) clw/es/3/0138 alt-a for copper braid (iv) clw/es/3/0458 alt.e for control cables (v) clw/es/3/0459 alt.c for screened cables (vi) clw/es/3/0124 alt.'o' for set of connectors. ( vii ) clw/es/3/0240 alt-b for panel c ( without diagnostic terminal ). (viii) rdso modification sheet no.rdso/2012/ms/0413 rev 1 (ix) rdso modification sheet no. rdso/2020/el/ms/0482 rev 1 (x) rdso modification sheet no. rdso/2017/el/ms/0457 rev-0 (xi) all the relevant rdso modification sheets applicable for the sub-components of igbt base 3- phase drive propulsion equipment should be implemented. (xii)clw spec no. clw/es/3/0431 (xiii) special condition of contract against rdso spec.rdso/2008/el/spec/0071 rev.05 (xiv) clw spec no.clw/amc/cd/01 (march 2016). (xv) clw str for manufacturing of driver display (xvi) clw str no. clw/cd&d/str/002 rev-0. make: bhel only. [ warranty period: 30 months after the date of delivery ] ]

CTN :45717809

08 Sep, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of set of retaining rings (pivot ring and housing ring) for housing of traction bar, set consisting of following items:- (1) pivot ring as per clw drg.no.1209.01.313-005 alt-2 with latest alteration (ref.abb drg.no.ia016-00261 rev-3 with latest rev., qty/set-04 nos. and (2) housing ring as per c lw drg.no.1209.01.313-004 alt-2 with latest alteration (ref.abb drg.no.ia016-0262 rev-3 with latest rev.), qty/set-04 nos.. spec./drg.no. clw drg.no.1209.01.313-004 alt-2 with latest alteration and clw drg.no.1209.01.313-005 alt-2 with latest alteration. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45365796

04 Jul, 2026 11.50 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fu

Central Government/Public Sector

CTN :45702701

01 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For auction sale of rolling stock - condemned and unserviceable bg demu coach no. special repair dpc 008073 with available items [refer enclosure for the material composition]. location: coach care centre tpj/diesel loco shed goc. custodian: sse/demu/diesel shed/goc. re-claimable items - [1] wheel sets with bull gear-04 sets [2] 8v 450ah lead acid battery-03 nos [3] 6v batteries-18 nos [4] truck assembly-02 sets [5] axle box with bearings-08 nos [6] buffer complete-02 nos [7] schaku coupler assembly[draw bar with hook, draft gear assembly]-01 set [8] brake cylinders-04 nos [9] wear pieces(brass)-04 nos [10] dpc main doors-02 nos. advice note no.073817-25-08698, dt: 11.12.25. note-[1] delivery to be made on as is where is and lot basis.[2]the location indicated is only tentative. railway reserves the right to change the location of sold coach, based on the availability of track, cutting and loading space and other administrative reason, as deemed fit by the auction conducting officer.[3]gas/chisel cutting is permitted only to sizes that are loadable with a crane, only after ensuring sufficient safety measures against fire hazards etc. to avoid any mishap to any person, railway material etc. and the same should be ensured by the witnessing officials.[4]in case purchasers require usage of any railway assets/materials such as electricity/forklift truck etc. during the process of delivery, they are required to pay the prescribed amount to railways, as directed by the respective custodian of the lot. special condition- [1] reclaimable item as said above in description of the lot, should be returned to the custodian before commencing delivery. [2] in order to make the assessment, the purchaser may visit the coach offered for condemnation and the site conditions before quoting the offer.[3] the purchaser has to make his own arrangements such as tools, lifting tackles, lifting equipment, gas cutting equipment. [4] the weight and quantities were taken into consideration as advised by the custodian [5] the purchaser may note that reclaimable items of coach are to be stripped instead of gas cutting to avoid damage to rc items and the purchaser should make such arrangements, especially traction motors should be removed by using proper tools and equipments without causing damage to truck assembly [6] the purchaser is strictly instructed to transport/stack all the reclaimable items at one location well away from the cut off parts of the coach as directed by the custodian. [7] the purchaser will be held responsible for any damage/fire accident caused to the railway property. [8] railway is not responsible for any shortage.[9] after completion of delivery, purchaser has to keep the cutting and loading spot neat and clean, free of any left over coach scrap. [10] railways does not guarantee for quality, quantity description etc.[11] delivery should commence immediately after cutting without any delay. [12] the courts in chennai alone shall have exclusive jurisdiction in the matters/disputes arising out of the contract/arbitration/conciliation proceedings and the place of arbitration/conciliation, if any, shall be in chennai only. [13] bsv partly paid along with emd will be forfeited, if full payment is not received in stipulated time, with interest if any applicable. [14] part delivery is not permitted against part payment. [15] if any hsd oil/lube oil available in fuel tank/oil sump of the said coach, the same may be returned to the custodian.(location: coach care centre tpj / diesel loco shed goc)

Central Government/Public Sector

CTN :45702761

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector,tapperbearing with polimer cage,doubelcupcollar,shockabsorber,hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger,iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel),castiron components, impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: bin n

State Government

CTN :45693769

06 Jul, 2026 NA

Palwal - Haryana

Tender For supply/installation of required items list for physiotherapy laboratory (major equipment, minor equipment and other items) - functional diagnostic lab (electro diagnosis lab), diagnostic electrical stimulator with facility to draw sd curve-, diagnostic electrical stimulator with facility to draw sd curve- reusable and disposable electrode pads, hypoallergenic conductive gel, elastic electrode straps 1 complete set per stimulator unit., biofeedback unit-, e.m.g./ncv/ep unit-, e.m.g./ncv/ep unit-shielded ep electrodes 2 sets; ground electrodes, disc type 2 sets; ground-electrode straps adult 1 & paediatric 1; recording electrodes, cup type 5 sets; ring & bar stimulating electrodes adult 1, paediatric 1 each; conductive paste (2 jars of 225g or more) 2 sets; skin-preparation gel (2 tubes/set) 3 sets; emg disposable needles, paediatric size (box of 25) 1 box; emg disposable needles, adult size (box of 25) 3 boxes; single-fibre emg needle (reusable) 1 nos.; temperature probe 2 nos.; led goggles 1 no.; acoustically shielded headphones 1 no.; insert earphones 1 set with adult buds (2) and paediatric buds (2), reusable., exercise tolerance and fitness lab, bicycle ergometer having speedometer and adjustable load, skin fold calipers , weighing scale with height measuring facility -, spiro meter and peak flow meter, pulse oximeter, hand evaluation kit, dynamometer (hand, back-leg chest) manual, sensory integration kit, body composition analyser, biomechanics and kinesiology, full size postural mirrors, plumb line, various orthosis & proshesis for demonstration, goniometers (360, 180 & finger), stadiometer, measuring tapes, medical physics and fundamental of electrotherapy lab, multimeter (analogue & digital), variable capacitance, batteries (6 v), batteries (12 v), dry cells (1.5 v, 3 v), oscilloscope, voltaic cell, daniel cell, lechlanche cell, lead acid accumulator, edison cell, transformer (step down), transformer (step up), dynamo model ac/dc, safety devices (fuses- 5a, 15 a), magnetic needle, bar magnet, electromagnet, electrotherapy lab, hydrocollator hot pack unit, paraffin wax bath, microwave diathermy, diagnostic electrical stimulator, diagnostic electrical stimulator- reusable and disposable electrode pads, hypoallergenic conductive gel, elastic electrode straps 1 complete set per stimulator unit., interferential therapy, t.e.n.s (four channel), ultrasound therapy unit, electronic traction unit (cervical & lumbar), uvr lamp, irr lamp, laser therapy unit, cryotherapy unit, cpm unit (lower limb), cpm unit (upper limb), exercise therapy lab, parallel bars, wall ladder, static cycles, suspension apparatus, shoulder wheel, t-pulley, finger ladder, hand exercise kit, multiple exercise chair/machine, tilt table, exercise mat 4 thick (6 x3 ), walkers (adjustable height with/without casters), elbow crutches, axillary crutches, walking sticks, wheel chairs - adult size, wheel chairs - paediatric size, medicine balls, dumbbells, quadriceps table, self exercising equipment (peripheral joints), swiss balls & bolsters, trampoline (various sizes), weight cuffs, balance board (adult), balance board (paediatric), goniometers (360, 180 & finger), treatment couches, standing frame, cp chairs, wedges, peg boards

CTN :45681547

15 Jul, 2026 NA

Sahibganj - Jharkhand

Tender For supply, commissioning and testing of bar to bar millivolt drop test bench for testing traction motor armature used in emu/memu/demu coaches as per specification attached as annexure-a [ warranty period: 30 months after the date of delivery ] ]

CTN :45664238

10 Aug, 2026 NA

Kharagpur - West Bengal

Tender For supply of set security plates for fiat bogie (consisting of 3 itmes): 1. security plate ( for control arm)to fiat drg no.1356259, index - 05, qty.- 16 nos/set. 2. security plate for anti roll bar arrgt. to rcf drg. no. lw05114, alt.-''nil'', qty.- 8 nos/set. 3. security plate ( for traction center ) to fiat drg. no.1268843, ver. 00, qty.- 02 nos./set. matl.& specn : ss-304/ x5crni18-10 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Camber Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government