Latest camlock Tenders | Government camlock Tenders

CTN :45566581

02 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : procurement of camlock coupling

Central Government/Public Sector

CTN :45076829

24 Jun, 2026 NA

Salem - Tamil Nadu

Tender For bid to ras providing of custom bid for services - replacement of apl 1 quench sections - 2.5" schedule 40 ss304 seamless pipe 2.5" high pressure ss304 pipe long seamless bend butt weld type 2" schedule 40 ss304 seamless pipe concentric reducer high pressure ss304 02" to ø1" 2" high pressure ss304 h nipple 2" high pressure ss304 female coupling 2" ss304 pn10 dn50 globe valve 1" dn25 flanged end rotameter 2500 lph το 25000 lph 2" ss304 corrugated hose with 2" camlock coupling on one end & 2" bsp male thread on other end 2.5" ss304 pn10 gate valve pn10 dn25 ss flanges pn10 dn65 ss flanges 2" high pressure union 6" schedule 40 ss304 erw pipe 8" schedule 40 ss304 erw pipe structurals - l angles, c channels, etc. 1000

CTN :45606733

27 Jun, 2026 1.93 Lacs

Malda - West Bengal

Tender For procurement of materials and repairing of pump house, internal wiring at fatepur-i hdtw( ml no 238) mouza, jl no 35, plot no 634, fatepur-ii hdtw( ml no 3) jl no 35, plot no 78 under fatepur mouza, at old malda block, malda. - procurement of materials, c.i. sluice valve with hand wheel, 151marked,15:14846. ) 150 rnrn dia. (sor wrdd ch)13.00 rates of materials for the program 2021-2022 item no-18a) page- 3), 150 mm dia ms plate flange ( rate approved by se dated 14.05.2020), repairing of pump house, stripping off worn out plaster and raking out joints of walls, celings etc. up to any height and in any floor including removing rubbish and stacking anywhere within the compound as directed., dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m in ground floor including roof. (a) up to 150 mm. thick, dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. a) in ground floor including roof, single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand., cement concrete with graded stone ballast (40 mm size) excluding shuttering in ground floor. (a) pakur variety a) 1:3:6 proportion, hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood plank of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor) (a) 25 mmto 30 mm thick wooden shuttering as per decision and direction of engineer-in charge., reinforcement for reinforced concrete work in the all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial strightening and removal of loose rust (if necessary), cutting requisite length, hooking and binding to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) for works in foundation, basement and upto roof of ground floor /upto 4 m. ( i ) tor steel/mild steel. ii. jsw/jspl/shyam/srmb/ bmasl/elecrosteel/ssl, ordinary cement concrete (mix 1:1.5:3) with graded stone chips ( 20 mm down ) excluding shuttering and reinforcement. if any,in ground floor. as per is 456-2000. a) pakur variety (rate analysis), plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor)(b) with (1:4) cement mortar. (ii) 15 mm thick plaster, neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc., artificial stone in floor, dado, staircase etc. with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners and including application of cement slurry before flooring works, using cement @ 1.75 kg/sq.m all complete including all materials and labour. in ground floor. 3 mm thick topping (high polishing grinding on this item is not permited) with ordinary cement. (iii) 25 mm thick, applying interior grade acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive distemper/ acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the eic. (in ground floor)applying interior grade acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive distemper/ acrylic emulsion paint

corporations/Associations/Others

CTN :45525616

17 Jun, 2026 NA

Mumbai - Maharashtra

Tender For to supply deck consumables - pencil roller brush (paint roller mini )100nm, with handle, polka dotted hand gloves (long sleeve) knitted type, stainless steel rule, 12, nylon belt sling, 100mmx3mtr,swl 2ton with tc, bucket, plastic, with handle, 10 ltrs, bucket plastic, with handle, 20 1.trs, mug, plastic, capa -1.5/2 ltrs, wall clock quartz, hatch tarpaulin pvc with eyelet 4x4 mtr, padlock, 40 mm, with 3 keys, brass, hacksaw blade high speed steel i" (miranca), anti chemical goggle, anti splashing, floor wiper with long handle, 400mm, ducting tape, size 2 ^ n * 25 long, butt hinge for cabin door, 3", butt hinge for cabin door, 4", 1/2 inch fresh water tap (steel), latch for ship cabin door size: 2 ^ n * x * q ^ n, rubber solution, speb 7., loctite 495, chipping goggle plastic, standard, aa battery 15 v, aaa battery 1.5 v, ear plugs plastic, scrapperl shaped double ended, steel, 12", long handle scrapper, single piece rain coat with hood rubber xl size, gum boots full size with lining inside: size 47, gum boots full size with lining inside: size:, gum boots full size with lining inside: size, gum boots full size with lining inside: size 0, electro cleaner spray, kilnit, p.p. rope 3 strand, 220 mtr 6 mm dia, pp rope, 3 strnd, 220 mtrs, 12mm dia, p.p. rope, 8 strand, 220 mtrs, 64 mm dia, 7.92 in, mbl 47500 kgf, floatin, type with manufacturers certificate., yacht mop complete, length overall 1580 mm, nylon deck brush with handle 12", door mat nylon lawn step 45x75 cm, door mat coir size 1.5" x 14" x 24, door mat coir size 1.5 x 24" x 36", brush, deck, 12", nylon, without handle, dustpan plastic, sponge mop with handle, width 180mm., examination pad, shower mixing valve (hot/cold), faucet wall combination 1/2" with hose pipe, plastic shower curtain size: 100mm x 1900mm, rubber hand gloves 14" (ordinary), slotted v-gard safety helmet, yellow, slotted v-gard safety helmet, white, buffing wheel id 19 mm and od 160 mm, thickenss-20 mm, water finding paste [100 grms], air hose 19mm x 30 mtr long (double layer), sounding tape 30 m (heavy bob) m.s, measuring tape, steel, 5 mtr len, measuring tape, steel, 15 mtr len, shower head dia-12 mm, monoblock mixer, for wash basin, manila rope 3 strand 3 strand, 22 mm x 220 mir length,, self drilling screw 1", self drilling screw 2", cargo net 3 mtr x 3 mtr, mesh size: 200mm, mesh rim rope 24mm, screw driver, engineer pattern, 10mm x 400 им, allen key (set of 9 pcs in mm), camlock coupling male/female, 3", brass, chipping hammer, butterfly nuts with eye bolt m12 x 70mm, butterfly nuts with eye bolt m16 x 100mm, rubber packing (hatch/wt door), size: 36mmxi8mm, bolt & nut, ss, ht, od 3 mm, l: 50 mm, cabin door rubber packing 25mm x 5mm the self sticking), towel bar round double 610mm, emery paper sheet grit coarse 230x280 mm, emery paper sheet grit medium 230x280 mm, hp toner cartridge 88 a hp for laserjet p1007, white chalk, cotton rags good quality banian material

CTN :44961942

15 Jun, 2026 65.76 Lacs

Jhalawar - Rajasthan

Tender For corrigendum : supply of spares for lnt make lt and ht switchgear, breakers and panel accessories of electrical circle and chp circle, csctpp, chhabra - racking handle for cn-cs 5000c, racking handle cn-cs 4000 h2, lockable trip push button type-aa, fixed arcing contact 800 s1, moving arcing contact 800s1, moving arcing contact, 5000c, hardware kit, spring charging, motor 220 v dc, spring charging limit, switch 220 v dc, closing coil 220 v dc, shunt release 220 v, dc, test position microswitch, service position microswitch, mdo to edo 800-, 2500c,3200h1(3p), mdo to edo 3200h1(4p), mdo to edo 5000c (4p), pole assembly 800c d/0, brekaer, door camlock-lhs, door camlock-rhs, racking handle, sic puller tq3 mat.-, delrin500, locking angle -tq3 m, tq3 earthing lip assembly, aux. busbar support, tq+tf2 v, aux.busbarterm assy, tf3,tq3-fr, aux.busbar support assy, tf3,tq3-fr, stainless steel door lock, td3,tf3-fr, bracket ,reset cord mn5 relay, ,tq3, xtension shaft, dropper support assembly, tq3 form iv, safety shutter tq3 d/o, safety shutter opener tq3, d/o, vcb spares 11 kv and 6.6, kv, big gear assembly, small gear -charging gear, assembly 12 kv vcb-25ka, subadha aux switch, (12no+12nc), tripping coil, closing coil, spring charging motor, vcb sds housing wo wire, pin locking channel, assembly, vaccum interrupter abb, vg6, drive rod assembly 800, a,1250a,2000a, vcb racking handle, spring charging handle, tripping rod, pin type channel racking, fixture 600 w, pin type channel racking, fixture 1000 w, breaker shutter assembly, 600 w, breaker shutter assembly, 1000 w, switron, switch,switron, 12no/12nc) aux., switch, rackin handel &, interlock, locking channel, assy 12kv 1250a 40ka, 1000w 3150a locking, channel assembly, limit switch, test/service,omron, make limit, switchmodel: x-, 10gm-b,contacts: 1, c/o, shutter roller, bracket 3150 a, roller for shutter, 3150a 40ka, pin for shutter, roller 3150a 40ka, 3150a breaker arm, contact - finger, contip finger f 2000a, vcb breaker, m4 flat washernylon(, 4.5 x 9, x 0.8mm), x 10-cozn pan head, m/c, screw, spring washer (zc), bottom conductor, arm, assy 12kv 3150a 40ka, top conductor arm, assembly 12kv 3150a, 40ka-abb, vi, 800a breaker arm, 800a vcb contact, finger assy new, flexible conductor, 12kv 800a, 40ka- abb vi, 2000a breaker arm, contip finger f 2000a, ø4 ss e-clips, ø6 ss e-clips, ø8 ss e-clips, ø10 ss e-clips 0.8mm, thk, circlip dia. 12mm, 1 mm, thick, 24 external type, circlip, wire circlip dia. 3.4+0/-, 0.4 ss, m3 x 25 spring pin, m3 x 30 spring pin, x 25 mm cotter pins, x 30 mm cotter pins, spring pin 6.5 dia x 40, long, split pin ø3x35, split pin ø1.8x20, connector type lug, for 800a,1250a,2000a &, 3150a), male connector - dnf, 14-250fim-m, female connector -, dnf 14-250fib-m, kv switchgear vcb, spares for type vk10l40h, rated voltage:12 kv, rated, normal current:800, a,rated s.c breaking, current : 40 ka & type, vk10q40h,rated, voltage:12 kv ,rated, normal current :3150, rated s.c. breaking, current : 40 ka, pds cable asm 12 kv, 800 a, short pds r phase asm 12, kv 800 a, short pds y phase asm 12, kv 800 a, short pds b phase asm 12, kv 800 a, breaker: type vk10l40h,, rated voltage:12kv, rated, normal current: 800a,, rated s.c. breaking, current: 40ka, line pt rack-in/out handle

CTN :45411893

09 Jun, 2026 NA

Parganas - West Bengal

Tender For spare parts for kraz veh - roof cushion (2 mtrs) part no dmd-nk-4018, door cushion rh (1 mtr ) part no dmd-nk-4019, door cushion lh (1 mtr) part no dmd-nk-4020, back rest cushion (2 mtr) part no nk, rack bow canopy part no nk, bush tapper gasket rr axle shaft flange part no 2002403048b, door window drop glass gasket part no 2146103218, gasket part no 255b8500048, gasket part no 256b6800230, gasket part no r2873701307, gasket part no 2361601118b, gasket part no 2361701042a, gasket part no 2361704029a, gasket part no 255b1802215, gasket cap front fixing part no 2145001024, gasket flange axle shaft part no 255b2303048, gasket fuel tank cap part no nk, gasket rocket cover part no 2102918148, gasket sealing part no 255b3410108, pad part no 256b1001008, qtr glass hinges(rubber) part no dmd-niv-3767, qtr glass rubber part no nk, air pressure drop sig switch k34 part no vk343720000, air pressure sig switch part no nk, bracket tail light mtg part no nk, bulb part no a24212, bulb a 24-3v part no 624001127, combination switch (aps) part no nk, connector 3 terminal part no psi3723000a2, convoy light assy front part no nk, convoy light assy rear part no nk

Central Government/Public Sector

CTN :45392565

10 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of one coach set of sidewall details for lhb ac composite coaches to drg. nos. 1)frame work to drg. no 83214004, alt 'b' - 1 no. and 83214005, alt 'b' - 1 no. all the items to be supplied as loose. angle to drg no.aaa14809 alt'nil' in the roof flange assembly to besupplied as loose. 2) carline assembly to drg. nos. 83214008, alt 'c' - 1 no. and 83214009, alt'c' - 1 no. single piece crf carline to drg no 83214010 alt 'a' and 83214011 alt 'a' to be followed. 3) welding parts to drg. no. 83214003, alt 'g' - 1 no. and 83214018, alt 'c' - 1 no special condition : packing drawing: i. for frame work and welding parts icf/j&t/sk-1865, alt 'a' to be followed. ii. for carline icf/j&t/sk-1882, alt 'a' to be followed. to be supplied in packages of individual coach sets only. - all the threaded holes shall be provided with suitable dummy bolts to safeguard the threads to avoid clogging while painting.. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45337661

18 Jun, 2026 NA

Bareli - Madhya Pradesh

Tender For supply of kit for side wall of lwaccw amrit bharat coach except side wall skin panels and crf items i.e. carlines and roof flange.as per planning set list no.mp25swallabawaccw version 0. packing instruction: pi042 ver 1.0 including 10 set of all loose material should be packed as single unit as per standard packing. [ warranty period: 84 months after the date of delivery ] ]

CTN :45338805

16 Jun, 2026 NA

Bareli - Madhya Pradesh

Tender For supply of set of roof flange for lwaccw amrit bharat coach (crf). as per planning set list no.mp25rfablwaccw version 0. packing condition: mcfpi033 ver 0 [ carline (crf) items to be wrapped in1 mm thick polythene sheet and packet in suitable steel crates] [ warranty period: 84 months after the date of delivery ] ]

CTN :45350002

10 Jun, 2026 3.24 Lacs

Dhar - Madhya Pradesh

Tender For supply of high back chair , full back chair , sofa set , centre table , worktable size , visitor chair with arms , cupboard - add on body with metal door and camlock , cupboard -glass and metal door combined

Camlock Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector