Get complete information related to latest Canal Gate Repair Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Canal Gate Repair Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Canal Gate Repair Tenders.
Tender For supplying and providing spare parts for pumps(no 1,2 and 3) and induction motors at bhadath pumping station included in changa dantiwada pipeline project. - providing spares for horizontal split case pump make: wpil, rpm-750, discharge - 5100 cum/hr, head - 42 m no of stages – two and induction motor make-jyoti ltd. capacity- 750 kw at bhadath pumping station for changa dantiwada pipeline project, providing and supplying pump shaft including loading, unloading, freight unit approved rates, providing and supplying sleeve( line shaft) including loading, unloading, freight unit approved rates, providing and supplying bearing 6222 c3 including loading, unloading, freight unit approved rates, providing and supplying pump bearing housing loading, unloading, freight rates as per rate analysis no. 1, providing and supplying wear ring (impeller) loading, unloading, freight unit approved rates, providing and supplying wear ring (casing) loading, unloading, freight unit approved rates, providing and supplying pump impeller including loading, unloading, freight rates as per rate analysis no. 1, providing and supplying bearing nu 324 c3 including loading, unloading, freight unit approved rates, providing and supplying bearing nu 326 c3 including loading, unloading, freight unit approved rates, providing and supplying bearing 6324 c3 including loading, unloading, freight unit approved rates, providing and supplying isi mark di d/f sluice valves as per is:14846 (latest edition) of following class and diameter including all taxes, insurance; transportation, freight charges, octroi, inspection charges, loading, unloading.conveyance to departmental stores, stacking etc. complete. (pn-1.6 with manually operated through gear box, non rising valve) dia 1000 mm rates as per rate analysis no. 2, providing and supplying battery set with float cum boost charger 200 ah, 2 v dc, model- upst including all taxes, insurance; transportation, freight charges, octroi, inspection charges, loading, unloading.conveyance to departmental stores, stacking etc. complete. rates as per rate analysis no. 2
Tender For amtc of ephs in sector 32 ue ambala cantt providing and fixing of 10hp submersible motor pumping set non clog discharge at head of 10 mtr 2300 lpm including panel board ci specials nrv sluice valve etc at temporary disposal ambala cantt
Tender For supply and delivery of 24 mtr head water pump,sluice valve and alfa-alfa valve required for maintenance of gundulgora govt. owned mjrli within bankura-ii(a-m)sub-division under bankura(a-m)division under np/mtn programme 2025-2026
Tender For annual repair maintenance work of radial gate 7 nos head sluice gates and 2 nos. coupled head stock set at kushalpura dam medium project (biaora), distt rajgarh (m.p.)
Tender For quotation for rate of c/f pump (clear water) and its accessories at saraswatipur rwss - supplying ,installation and commissioning of multi stage/ horizontal split casing/multi stage centrifugal pump (make: kirloskar / wpil/jyoti/ mather & platt) rating-15 kw/20hp as per is:5120, capable for discharging 72 m3/hr against a head of 40 m , consisting of bronze impellers, stainless steel pump shaft, etc. with all accessories coupled with energy efficient (ie3) tefc squirrel cage induction motor confirming to is:325 and is:12615, having 15% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar /abb/cgl/bhel] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, reducer, foot valve, pressure gauge, nuts & bolts, packings, fitting & fixing, labour & technician, etc. all complete job as per site requirement and direction of e/i. discharging -72 m3/hr and head - 40m (1w + 1s) 20 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 20 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job., cost towards making suitable suction line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion, including making hole for suction, cutting, welding etc all complete., cost towards making suitable delivery line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion including joining the new suction line to the existing header by means of cutting, welding etc all complete., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 100 a copper busbar- 4 pole, 1 no. 100 a mccb as incoming feeder and 2 nos. 63a mccb as outgoing feeders for motors, 1 no. 63 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, mfm, indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i .), supplying and erecting 16 sqmm 3 core xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors), providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismanteling of old pump set and foundation and making arrangements for removal of debries from the pump house., construction of chamber for 100mm sluices valve.
Tender For quotation for rate of vt pump (raw water) and its accessories at saraswatipur rwss - supplying , installation and commissioning of single/multi stage vertical turbine pump sets (make: kirloskar /wpil/ mather & platt), rating-22kw/30hp approx as per is 1710, capable of discharging 94.56 m3/hr against a head of 50 m, consisting of bowl assemblies, bronze impellers, column assembly, stainless steel pump shaft, line shaft, etc. with all accessories coupled with squirrel cage induction motor confirming to is:325 and is:12615, having 20% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar, jyoti, abb, cgl, bhel, jsl] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, reducer, pressure gauge, etc. all complete job as per site requirement and direction of e/i. discharging -94.56 m3/hr and head - 50m (1w + 1s) 30 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 30 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job for raw water vt pump set., cost towards jointing newly installed pump motor set to the existing header at raw water p/p., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 160 a copper busbar- 4 pole, 1 no. 160 a mccb as incoming feeder and 2 nos. 100a mccb as outgoing feeders for motors, 1 no. 100 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, mfm, indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i ., supplying and erecting 16 sqmm 3 core xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors)., providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismantling of old pump set and foundation and making arrangements for removal of debries from the pump house.
Tender For quotation for rate of items of vt pump (raw water) and accessories at gumuria rwss - supplying , installation and commissioning of single/multi stage vertical turbine pump sets (make: kirloskar /wpil/ mather & platt), rating-7.5 hp approx as per is 1710, capable of discharging 24.5 m3/hr against a head of 30 m, consisting of bowl assemblies, bronze impellers, column assembly, stainless steel pump shaft, line shaft, etc. with all accessories coupled with squirrel cage induction motor confirming to is:325 and is:12615, having 20% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar, jyoti, abb, cgl, bhel, jsl] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, foot valve, reducer, pressure gauge, etc. all complete job as per site requirement and direction of e/i. discharging -24.5 m3/hr and head - 30m (1w + 1s) 7.5 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 7.5 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job., cost towards jointing newly installed pump motor set to the existing header., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 100 a copper busbar- 4 pole, 1 no. 100 a mccb as incoming feeder and 2 nos. 63 a mccb as outgoing feeders for motors, 1 no. 63 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, phase indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i .), supplying and erecting 6 sqmm xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors)., providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismanteling of old pump set and foundation and making arrangements for removal of debries from the pump house.