Get complete information related to latest Candle Lamp Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Candle Lamp Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Candle Lamp Tenders.
Tender For special repair to dbs sub main wiring and miscellaneous items at mh and central institute at old amritsar cantt - taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody or for taking credit (creit for above items shall be made as per condtitions separately) and making good disturbed surface of walls, floors, etc complete all as specified and directed., material and labour for point wiring in existing conduit for following point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core frls pvc insulated unsheathed and multi stranded copper conductor cable 1100 volt ( isi marked ) drawn through and existing pvc concealed/conduit with all fittings and accessories including pressed steel powder coated sunken terminal box suitable for modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core frls pvc insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cutting chases in wall and making good disturbed surfaces of walls/ceiling/floorsetc by using cement mortar (1:3) complete all as specified and as directed. note : 1 switch, socket, regulator, bell, ceiling rose, regulator, lamp holder will be measured and paid separately.a) for one light /fan/ buzzer point controlled by one 5 amp switch one way, b). for one three pin socket outlet 5 amps independent board., c) for one three pin 5 amps socket outlet on the same board with other switch, d) for one light point controlled by two way switch, all a per item no 2 here-in-above but with 2.5 sq mm size cable multi stranded frls copper wire unsheathed for one 3 pin socket outlet 15 amps on independent board including continuous earth wire of pvc insulated 2.5 sq mm copper multi stranded conductor connecting to common earth dolly complete all as specified and directed., material and labour for surface point wiring for one light point/fan point/bell point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core frls pvc insulated unsheathed and multi stranded copper conductor cable 1100 volt ( isi marked ) drawn and including surface pvc conduit with all fittings and accessories i.e. pipe bend,pipe hook, elbow,juction boxes etc including pressed steel powder coated sunken terminal box suitable for modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core frls pvc insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc by using cement mortar (1:3) complete all as specified and as directed. note : 1. switche, socket, regulator, ceiling rose, bell, lamp holder will be measured and paid separatelya) for one light /fan/ buzzer point controlled by one 5 amp switch one way, b). for one three pin socket outlet 5 amps independent board, c) for one three pin 5 amps socket outlet on the same board with other switches, d) for one light point controlled by two way switch, all a per item no 7 here-in-above but with 2.5 sq mm size cable multi stranded frls copper wire unsheathed for one 3 pin socket outlet 15 amps on independent board including continuous earth wire of pvc insulated 2.5 sq mm copper solid conductor connecting to common earth dolly complete all as sp
Tender For regular operation and maintenance of street lights and high mast light with material for two years at different industrial areas of ajmer zone, amounting to rs. 16.46 lakh - street light repairing work and on/off main switch in industrial areas of ajmer including rewiring of fixtures, changes of ballast, clamp, stater, condenser, tube rods, stater sheet, tube holder, mercury & sodium vapour lamps, ignitor & refixing on poles and change of fixtures, change of main switch, kit kat fuse wherever necessary complete including joining of jumpers, complete repairing of tube light fixtures, mercury vapour and sodium vapour lamp fixture ( all required material will be arranged by the contractor except new fixture). led fixtures., contract for operation and maintenance of high mast light (led fixtures) with material as per enclosed terms and conditions. the scope of work includes operation and maintenance of high mast lights, on and off high mast light, electrical panel, repairs of light with all required materials, replacement of necessary electrical components, cable, timer, contractor etc including excavation for cable and maintaining the light in good condition as per enclosed terms and conditions.
Tender For regular operation and maintenance of street lights (with material) at all industrial areas under riico ranpur kota(for 2 years) - regular operation and maintenance of high mast light in ranpur , kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register shall be maintained at riico/association office and complaint lodged must be attended by contractor within 24 hours. the person deputed by contractor shall attend the riico/association office daily and comply the instructions and attend complaints regularly. iii contractor will have to employ trained and qualified electricians for the work. iv corporation shall not be responsible for any kind of accident during execution of work. v contractor will be responsible for safety and security of fixtures and all concerned materials. vi contractor will be responsible for arrangement of all t&p required for the work vii cost of all labour and material like lamp / balllast wire etc. will be born by contractor. all material required for the work shall not be below the category-ii of concerned bsr item. contractor has to repair and maintenance of fixture with material in all cases like short circuit, phase to phase of jvvnl line etc. viii no extra payment will be made for fixing/removal of extra/existing fixture in the industrial area. ix contractor will be responsible for timely collection and deposition of electric bills of areas in each month. in case of delay in payment and jvvnl impose surcharge for delay payment the same will be recovered from the running bill fo the contractor. payment of electricity bill will be made by riico. x contractor will be responsible for rebate of timer provided by jvvnl. hence contractor will maintain the on/off system by timer properly. in case no rebate is provided by jvvnl due to failure of timer then rebate will be deducted from contractor payment. xi contractor will be responsible for any theft of electricity through poles and he will make necessary arrangements for this. in case of any theft is found suitable penalty will be imposed on the contractor. xii contractor will maintain cubical panel board and assessories fitted in it. in case of any fault repair/replace of material will be done by the contractor at his own cost. no extra payment will be made on behalf of material. xiii contractor has to keep ready total fixtures. in case of fault of fixture a penalty of rs.100/- per fixture per day will be imposed on the contractor., regular operation and maintenance of street light fixtures hpsv/ hpmv (70w/150w) in ranpur, kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register sh
Tender For procurement of material and hiring of labour for day to day maintenance of various electrical installations in municipal parks and buildings in ward 87 ranjeet nagar under kbz - supply of 1.5 sq. mm isi marked, frls pvc insulated,single core copper conductor cable as required., supply of 4.0 sq. mm isi marked, fr pvc insulated, single core copper conductor cable as required., supply of 63 amps., 2 pole isolator as required., supply of 6 a, to 32 a, ratings, dp mcb, "c" curve, 10 ka breaking capacity as required., supply of 6a to 32 a ratings, sp mcb, "c" curve, 10 ka breaking capacity, fabrication, supplying and fixing class b galvanised single overhang arm bracket made out of 250 mm long galvanised top tube with cap and 1000 mm long 32 mm dia galvanised pipe with tightening bolts complete as required., supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:- 2x 6 sqmm, supply of xlpe insulated pvc sheathed al. conductor armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*10 sqmm, supply of following size of pvc insulated & pvc sheathed copper conductor 3 core submersible cable conforming to is . 694/210 etc. as rqd. 3 2.5 sqmm with voltage grade 1100 volts., supplying, lowering, testing and commissioning of vertical type, multistage, totally enclosed water filled deep well submersible pumping set complete i/c connection etc. as reqd. (b) single phase 3.0 hp having discharge of 100 lpm approx. at 52 m head, supplying, lowering, testing and commissioning of vertical type, multistage, totally enclosed water filled deep well submersible pumping set complete i/c connection etc. as reqd. (c) three phase 5.0 hp having discharge of 300 lpm approx. at 39 m head., supply, installation, testing and commissioning of cubical type control panel board for single phase & three phase submersible pumping set of following rating complete with contactor, relay , mcb ,condenser ,voltmeter, ammeter and indication lamp etc including connections etc as reqd. (c) 3 hp (three phase), providing following labour for day to day maintenance of ward i/c required t&p etc. in one shift in a day on all working days (required maintenance material will be provided by department) as required as per terms & condition of the department (excluding parts) complete as required. 1. skilled labour", providing following labour for day to day maintenance of ward i/c required t&p etc. in one shift in a day on all working days (required maintenance material will be provided by department) as required as per terms & condition of the department (excluding parts) complete as required. 1. un-skilled labour", supply of led street light fixture, powder coated pressure die cast aluminium body (system lumen efficacy 120 135 lm/watt) of following body materials. - 45 watt
Tender For inviting rates of electrical and repair material for financial year 2026-27 at nagar palika parishad tikamgarh - inviting rates of electrical and repair material for financial year 2026-27, approved and suitable make led driver for led street lights 50watt, color temp 3000-6500k, approved and suitable make led driver for led street lights 60watt, color temp 3000-6500k, approved and suitable make led driver for led street lights 90watt, color temp 3000-6500k, approved and suitable make led driver for led street lights 120watt, color temp 3000-6500k, approved and suitable make led driver for led street lights 150watt, color temp 3000-6500k, approved and suitable make led driver for led flood lights 150watt, color temp 3000-6500k, approved and suitable make led driver for led flood lights 200watt, color temp 3000-6500k, 100w led metal core printed circuit board (mcpcb) commonly used for high-power floodlights or street lights jps 3105 90w 08 5810c 2100w ytba0106 170513, led metal core printed circuit board (mcpcb) used for low power street lights marked ccc- 14679 160x100 mm- 2835-100sc, ip66, fluorescent tube rod 36/40 watts isi marked of approved make as required as per specification, havells bajaj, philips, crompton, surya, equivalent, fluorescent electronic ballast chock 36/40 watts isi marked of approved make as required as per specification, havells bajaj, philips, crompton, surya, equivalent, fluorescent tube rod side holder isi marked of approved make as required as per specification, anchor, reputed make equivalent`, ignitor 70/125/150/250/400 watt isi marked of approved make as required as per specification, havells bajaj, philips, crompton, surya, equivalent, sodium vapour lamp 150 watt isi marked of approved make as required as per specification, havells bajaj, philips, crompton, surya, equivalent, sodium vapour chock 150 watt isi marked of approved make as required as per specification, havells bajaj, philips, crompton, surya, equivalent, sodium vapoursodium vapour porcelain holder 150 watt e40 isi marked of approved make as required as per specification, anchor, finolex reputed make equivalent`, sodium vapour lamp 250 watt isi marked of approved make as required as per specification, havells bajaj, philips, crompton, surya, equivalent, sodium vapour chock 250 watt isi marked of approved make as required as per specification, havells bajaj, philips, crompton, surya, equivalent, sodium vapour sodium vapour porcelain holder 250 watt e40 isi marked of approved make as required as per specification, anchor, finolex reputed make equivalent`, sodium vapour lamp 400 watt isi marked of approved make as required as per specification, havells bajaj, philips, crompton, surya, equivalent, sodium vapour chock 400 watt isi marked of approved make as required as per specification, havells bajaj, philips, crompton, surya, equivalent, sodium vapour sodium vapour porcelain holder 400 watt e40 isi marked of approved make as required as per specification, anchor, finolex reputed make equivalent`, led bulb 9 watt isi marked of approved make as required as per specification, havells bajaj, philips, crompton, surya, equivalent, led bulb 18 watt isi marked of approved make as required as per specification, havells bajaj, philips, crompton, surya, equivalent, led bulb 23 watt isi marked of approved make as required as per specification, havells bajaj, philips, crompton, surya, equivalent, led bulb holder for 9w/18w/23w isi marked of approved make as required as per specification, havells bajaj, philips, crompton, surya, equivalent, 18w led tube rod integral tube fitting complete as required marked reputed make havels, philips . rr, c&s, surya etc equivalent, tape roll steel grip roll isi marked, universal clamp with bracket complete for tube light fixture / any street light universal iron clamp 300mm pipe length 25.4 mm dia. with bracked nut bolts complete as required as per specification, universal clamp with bracket complete for tube l
Tender For supply of fab and sply of high mast 30mt , sup led flood light 500w , flp feeder pillar , foundation bolt stl , sply of double dome aviation lamp , instl of mast feeder pillar , i t c of flood light fixture for high mast , inst testing e and c of high mast 30mt
Tender For tender for supply of various electrical items - luminaire , led basd:indoor lighting (2x2) 36w , lamp,led , 12w led fixture (circular), fitted with led lamp, including driver with , m8225127432led basd flood light - 180-210w ,
Tender For purchase of electric supply maint sotres led bulb tube for the qe jun 26 - 2ft x 2ft led recess mounting fittings , halogen lamp 50 watt, 220 volt, focus light , led 10w led tube rod with batten 2ft long , led 20w led tube rod with batten 4ft long , e-14 bulb 40 oblique 60 watt small thread , led tube rod 18 watt, 1200 mm , led bulb 12 watt b22 , street light timer 240v ac , led 12 watt b22 cdl inverter bulb , led 36 watt warm white, 2ft x 2ft recessed light , led street light fitting 60w , post top bollard 10 watt ip 65 , led street light fitting 60w led ip66 , high mass high bay wo pole led flood light 150 w , led street light fitting 48 watt , led street light fitting 72 watt , 10 watt led bollard light inverted pyramid tripod type , led post top light 25 watt ip 65 , led flood light 250w , led floodlight 350 watt , led bulb 15 watt b22 , led flood light 200 watt , post top lontern 20w oblique 25w , led bollards light 10 watt , led street light driver for 60w , led 6 watt warm white round recess downlight , led street light fitting 150w led 6000k , led street light 90 watt , led flood light 100 watt , led flood light 150 w , led bollard light in rectangular shaped victorian design , led bulb 7 watt b22 , led bulb 5 watt b22 , led street light fitting 30 watt , led flood light 120 w , led 25 watt white wh post top light , led street light 60 watt , gate light 20 oblique 25 w , led bulb 9 watt b22 , led street light fitting 120w , led tube rod 10 watt, 600 mm , driver for 2x2 led false ceiling 36 oblique 40w , led flood light 200 w , led street light fitting 45w , led flood light 120 watt , led 12 watt warm white round recess downlight , led street light fitting 100 w led 6000k , led street light driver for 150w led 6000k , led street light driver for 100 w led 6000k , led flood light 100 watt , led street light fitting 24w , e-27 bulb 40 oblique 60 w big thread , gls lamp clear 40 watt , gls lamp clear 60 watt , led floodlight 90 watt , flood light 60 oblique 90 watt , led street light driver for 48 watt , down light 9 watt , led street light fitting 50 watt new led fitting 5000k , led street light driver for 72 watt , led 6w eterno slim led batten 1ft long , spotlight led 6 watt , 100 watt led flood light ip 65, 120 im oblique w , down light 6 watt , cfl lamp 36 w 4 pin , lamp electric gls 100 watt , rice bead light with 100 nos of led lamps of blue colour , led surface light square 12 w , led lumeno 3w e-14 cdl candlelamp , led street light driver for 30 watt new led fitting 5000k , led street light driver for 120w led 6000k , led street light driver for 45w led , led street light driver for 15w led , spot light 9 watt , leds deco ring rong 0.5w red, blue, green, yellow, white , emergent light , led lumeno 3w e27 cdl candlelamp , led street light fitting 15w led , electric lamp 10w 230v blue, green, red, yellow , indication lamp red oblique green round type , led strip light 50w, 5a 12v , 9 watt, led warm white e27 bulb , spotlight led 10 watt , 5 watt, led warm white e14 bulb , holder for small thread bulb 40 oblique 60 watt , holder for big thread bulb 40 oblique 60 watt , 20w inverter led batten , 10w inverter led batten