Latest cane carrier slat Tenders | Government cane carrier slat Tenders

Corporations And Associations And Others

CTN :45488872

06 Jul, 2026 NA

Jalandhar - Punjab

Tender For corrigendum : supply of chain and chain spares - csm bhogpur, bagasse elevator chain & its spares, chain with case hardened, m.s roller, bush and pins for baggase elevator chain having attachment link at every 4th link., pitch 150 mm, side link as per drg. no.ce/mh/504 with test certificate from approved lab, bush as per drg no. ce/mh/504, roller as per drg no. ce/mh/504, pin as per drg.no ce/mh/504, outer link pin cut type as per drg.no. ce/mh/504, outer link pin size hole as per drg.no. ce/mh/504, inner link bush type (both sides) as per drg.no. ce/mh/504, side attachment link as per drg.no. ce/mh/504, cane carrier chain & its spares, cane carrier chain pitch -150mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no.mh pcc r1, pin as per drawing no. . mh pcc r1, bush as per drawing no. . mh pcc r1, roller as per drawing no. . mh pcc r1, outer link r.h as per drawing no. mh pcc r1, outer link l.h as per drawing no. mh pcc r1, inner link r.h & l.h as per drawing no. mh pcc r1, cane carrier slates as per drg no. mh-517, inter-rack carrier chain& its spares, inter rack carrier chain pitch -229mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no. ce/mh/503, bush as per drg. no. ce/mh/503, pin as per drg no. ce/mh/503, inner link l.h & r.h as per drg.no. ce/mh/503, outer link l.h without attachment as per drg.no. ce/mh/503, side attachment link (outer link l.h) as per drg.no. ce/mh/503, secondary carrier chain & its spares, secondary carrier chain pitch -229mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no. ce/mh/503, bush as per drg. no. ce/mh/503, pin as per drg no. ce/mh/503, inner link l.h & r.h as per drg.no. ce/mh/503, outer link l.h without attachment as per drg.no. ce/mh/503, side attachment link (outer link l.h) as per drg.no. ce/mh/503, csm nawanshahr, supply of secondary carrier chain spares as per drg. no. 183 r3material of side link en 45pin & bush 16ni3cr2/isi57 part 4/1988roller is- 226- 1975hardness = pin 50 5 hrc bush 40 5 hrc roller 30 5 hrcbreaking load = 60 ton, supply of cane carrier chain and spares as per drg. no. 216 r3material of side link 55c8/is 1875:1978pin & bush 16ni3cr2/isi57 part 4/1988roller is- 226- 1975hardness = pin 50 5hrc bush 40 5 hrc roller 30 5 hrcbreaking load = 40 ton, side link (fig no. 1), side link (fig no. 2), side link (fig. no. 3), roller (fig no. 4), pin (fig no. 5), bush (fig no. 6), slats (fig no. m- 316r), supply of rbc chains as per drg. no. m- 263rmaterial of side link 55c8/is 1875:1978pin & bush 16ni3cr2/isi57 part 4/1988roller - is 226-1975hardness = pin 50 + 5 hrc bush 40 + 5 hrc roller 30 + 5 hrcbreaking load = 60 tonsupply of spares for r.b.c. chain as per drg. no. m-263 r1, side link for bush (fig no. 1), side link (round hole) ( fig no. 2), side link (one side cut hole) (fig no. 3), side link for attachment ( fig no. 3 a), attachment no. m 111r2, roller (fig no. 4), bush (fig no. 5), pin (fig no. 6), rake (grill type) as per drg. m-111r3, pin for rake as per drg m-111r4, supply of forged link chain 229 mm pitch as per drg. no. m-305specification:material of forged block - en 30 bmaterial of pin & bush - 16ni3cr2pin hardness - 50 5hrcbush hardness - 40 5hrcbreaking load - 70 ton, csm batala, pin for rbc as per drawing no. bcsm/mh/01, bush for rbc as per drawing no. bcsm/mh/01, roller for rbc as per drawing no. bcsm/mh/01, pin for mbc as per drawing no. bcsm/mh/01, bush for mbc as per drawing no. bcsm/mh/01, roller for mbc as per drawing no. bcsm/mh/01, pin for elevator as per drawing no. bcsm/mh/01, bush for elevator as per drawing no. bcsm/mh/01, roller for elevator as per drawing no. bcsm/mh/01, pin for cane carrier as per drawing no. bcsm/mh/01, bush for cane carrier as per drawing no. bcsm/mh/01, roller for cane carrie

Central Government/Public Sector

CTN :45329483

29 Jun, 2026 12.61 Lacs

Nagrota - Himachal Pradesh

Tender For corrigendum : provision of 01 x 30 kva genr with connected items as standby power requirements for sewage treatment plant under age (i) bhalra - supply, installing, commissioning and testing, water cooled, sound proof silent type, turbo charged, diesel engine driven generating set 30 kva (at 0.8 pf), 415v, 3 phase, 4 wire engine as per is: 10001/10002 and alterator as per is: 13364, complete with relay panel for automatic starting on mains failure, control panels having meters in an integral acoustic enclosure as per recommendation cpcb norms, comprising of the following:notes: quoted rates shall deemed to include the following also:-(i) supply of t and p and normal space ie., bi-hexagonal ring spanner set of 12 pieces - 01 set.(ii) fuel measuement gauge - 01 no, hand operated fuel lifting pump with steel pipe 40mm dia - 01 no, hydro meter - 01 no, set of fan belt, oil/ fuel filters initial filling of coolant (coolant-2liters).(iii) service maintenance manual along with cat part list and price list - 03 set each.(iv) make of engine and alternator will be got approved from age (i) bhalra before placing the order., (a) diesel engine. diesel engine developing suitable bhp, 1500 rpm inclusive of the following standard accessories:(i) radiator/ heat exchanger cooling system. (xiv) battery charging generator.(ii) spider coupling guard. (xv) industrial silencer.(iii) fly wheel. (xvi) lubricant oil cooler.(iv) fly wheel housing complete with starter gear ring and coupling. (xvii) flexible pipe for silencer. (v) fuel pipes. (xviii) battery volt meter.(vi) air cleaner. (xix) water temperature gauge, lub oil pressure (vii) fuel and lubricant oil filter. gauge.(viii) by pass filter. (xx) speedo meter and engine running hours meter.(ix) coolant inhibitor. (xxi) display for fault.(x) fuel pump. (xxii) turbo charger.(xi) water pump. (xii) lubricant oil pump.(xiii) self/electric starter.(b) alternator : synchronous alternator 3 phase 4 wire, 50 cycles 1500 rpm, self excited, self regulated, brushless type, 0.8 pf, 415v, ac supply, 30 kva capacity, copper wound, complete including necessary tools, mounted on strong rigid steel fabricated base frame and directly coupled through flexible coupling with diesel engine, complete all as specified and directed., (c) amf/ control panel : amf panel factory made of suitable capacity as per original equipment manufacturer make and specification or as approved by oem for dg set of capacity 30 kva of suitable size, indoor cubical type, front and back openable fabricated out of mild steel sheet 1.6mm thick grounted in floor with adequate pcc foundation and minimum consisting of following :(i) contactor of suitable size for 30 kva dg set.(ii) copper bus bar of suitable current rating and sensitivity relay set unit with auxiliary cts.(iii) electronic latch circuit with tripping indication.(iv) re-set facilities.(v) 3 phase mvr relay unit with single phase protection complete with 2 no nc auxiliary contacts.(vi) 3 phase avr relay unit complete.(vii) self sequential starting relay unit 12 volts dc complete with alarm and power contactor. (viii) electronic timer 220 volts for main contactor with 1 no nc auxiliary contactor.(ix) electronic timer 220 volts for fuel cut off operation with 1 no auxiliary contactor.(x) battery charging 2x12 volts 10 amp complete with digital voltmeter and amps meter, including trickle and boost charging, make : su-kam, amco, exide or any other make as recommended by the manufacturer.(xi) volt meter 0-500 volts panel mounting of size 96mm square with selector switch digital type.(xii) amps meter 0-100 amps with 3 nos cts, 400/5 and selector switch 96 mm square digital type.(xiii) frequency meter (45-55) hz, 415 volt, 96mm square digital type.(xiv) the amf panel should have manual by pass arrangement too in case of failure of amf panel., (d) fuel tank of capacity as per manufacturer recommendations.(e) base frame made out of suitable channel duly reinforced and provided with adequate nu

Co-operative

CTN :45415201

10 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For fabrication and erection -replacement of the 2" x 2" square bar rails installed on the cane unloader. removal of the old juice gutter from 'a' mill, fabrication and installation of a new one, and conducting a successful trial run. removal of the old m.s. juice tray from 'a' mill, and fabrication and installation of a new one using m.s. plates. fabrication and installation of a new gear guard in the 'a' mill house. welding of worn-out teeth on the mill pinion as required, followed by grinding to a smooth finish. repair of damaged/worn parts of the tail bar coupling by welding as required, followed by grinding. repair of damaged/worn parts of the tail bar by welding as required, followed by grinding. comprehensive repair of the d.s.m. screen: cutting out and removing corroded sections, fabricating and fitting new replacements, repairing all internal piping, and conducting a successful trial run. thorough cleaning of the cane carrier slats, along with their attached links, pins, rollers, and bushes; followed by greasing and refitting said components into the slats in their proper positions. thorough cleaning of the slats, links, pins, bushes, and rollers of the primary/secondary cane carrier chains; followed by greasing, assembling the chain components, and preparing the chain as per instructions. fabrication and installation of juice rings for the rollers. fabrication and installation of mill bearing guards using 3 mm plates. fabrication and installation of m.s. scrapers for the under-feed rollers. cutting of chevron grooves into old mill rollers as required. cutting of chevron grooves into new mill rollers as required. creating 'dots' on the top and feed rollers of the mill using arc-welding electrodes, as per instructions. [repair/replacement of] m.s. components for the worn-out teeth of the under-feed rollers. cutting out patches from a plate and installing them as new teeth. performing arc welding on the grooves of rollers used in the mills using electrodes, as per instructions. fabricating side juice guards for mill rollers from 3 mm plates, as per instructions. fabricating an under-feed roller for the mill in accordance with the provided drawings. dismantling a damaged or defective juice tank in the mill house; fabricating and installing a new tank in its place, and conducting a trial run. replacing or repairing the damaged sections of a defective juice tank in the mill house. dismantling and replacing the bottom plate of a damaged or defective juice tank in the mill house. cane carrier / bagasse carrier / bagasse elevator / cross bagasse carrier / r.b. c. removal of the cane carrier side plate and installation of a new plate. a. welding or forging the enlarged pin holes in the links of the cane carrier, bagasse carrier, etc., to match the specific pin size. a. removal of broken runners from the cane carrier, inter-carrier, bagasse elevator, return bagasse carrier, or cross bagasse carrier, and installation of new runners in their place. a. removal of old, damaged cane carrier slats and installation of new slats. a. the task of drilling holes in new slats for the cane carrier and inter-carrier. a. straightening and repairing cane carrier slats as required. a. repairing damaged and weakened hoods of the cane chopper, cutter, and fibrizer in accordance with instructions. a. removal of old, damaged cane carrier slats; straightening the damaged slats; cutting out the damaged sections; and repairing them by welding in new or salvaged slat pieces cut to size, thereby restoring the slats to their proper dimensions. a. welding the enlarged holes in the inter-carrier links and re-drilling them to the correct size to match the rivets. a. filling the enlarged holes in old inter-carrier slats by welding, and subsequently re-drilling them to create new holes in accordance with the engineering drawings. a. removal of the damaged band from the inter-carrier clutch shaft, fabricating and installing a new one, and conducting a satisfactory

CTN :45175471

08 Jun, 2026 NA

Billimora - Gujarat

Tender For corrigendum : supply of bi facial solar panel 550 watt , topcon solar panel 610 watt , cut section of gate valve,globe valve,ball valve,diapharm valve,needle valve,check valve,safety valve,butterfly valve,pnematic control valve 4 inch diameter , cut section of centrifugal pump,gear pump,multistage c f pump,reciprocating pump,screw pump , cut section of shell and tube heat exchanger acrylic material , cut section of reactor with accessories motor,agitatot,support leg,nozzle,manhole,baffels,thermo well,bottom valve , gauge manifold with gauges different size of hoses for r134a,r22,r32 and r 410 , wash bag cover jacket for ac service indore 1 point 5 ton,2 point 5 ton capacity , safety belt, industrial type full body protection double rope double hook,100 kg human weight , embroidery machine , brake test arrangement with two spring balance 0 to 25 kg rating , automatic motor coil winding machine with step arbor , three phase variable auto transformer ac varic 3 phase , 0 to 440v, 25a, 50 hz , synchronous motor, with accessories , vfd ac drive ac motor drive with vvvf control 3 phase , single phase transformer, core type, air cooled,1 kva,240 or 415 v,50hz , stepper motor with digital controller , bipolar , 12v dc , input pulse 5v, step angle 1 point 8 , power supply 230 v ac , oprating condition 0 to 40 deg c , bldc motor fan with controller 40 watt , servo motor with contoller 300rpm,12v dc,6mm dia and 15mm legth shaft ,holding torque 30kg cm,no load current 0 point 8 amp,full load current 7 point 5 amp , electrical test bench integrated with 0 to270v ac variac 25a ) /bid number : gem/2026/b/7525454 * /dated: 13-05-2026 & & / bid document 1 / 20

CTN :45303437

26 May, 2026 43.5 Thousand

Delhi - Delhi

Tender For provision of electrical item at the residence office of shri gaurav goyal, joint secretary, new delhi.subwork/packages:provision of electrical item at the residence office of shri gaurav goyal joint secretary, new delhi. - supplying , installation, testing and commissioning of air cooled hi wall split type air conditioners complete with indoor unit(idu), out door unit (odu), surface / concealed copper refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 mtr (idu to odu), copper power cable upto 3.5 mtr (idu to odu) i/c drain pipe r-32/r-410/ r-407 green refrigerant, wireless remote control, suitable for working between 180- 260v with low & high voltage cutoff and 50 hz ,1 phase ac supply capable of performing cooling, dehumidification, air circulation of following capacity with scroll / rotary compressor. the system shall be able to deliver 100% of the rated capacity upto 42 0c. min 5 year original equipment manufacturer (oem) warranty both compressor and printed circuit board (pcb). must comply : electrical cable is 694 or is 9968 temperature sensing control is/international electrotechnical commission (iec) 60730, hermetic compressor is 10617, heat exchanger is 11329, capacitor is 2993 and motor is 12615. complete as per cpwd specification and is : 1391 part ii 2023. the system shall be able to operate up to 50 0c (out door ambient temperature). inverter type - cooling only

CTN :44986036

29 Apr, 2026 NA

Thanjavur - Tamil Nadu

Tender For purchase of cane carrier slat and wear pad for cane carrier slat

CTN :44934965

24 Apr, 2026 NA

Perambalur - Tamil Nadu

Tender For notice for cane carrier slat

corporations/Associations/Others

CTN :44925846

08 May, 2026 1.00 Crore

Multi City - Multi State

Tender For supply of chain and chain spares e e - per drawing , cane carrier chain side bar link carbon steel hardened and tempered suitable for 40 tonnes breaking load , attachment link , material grade en9 suitable for 60 tonnes, 229 mm pitch rake carrier chain as per drawing , chain bagasse carrier en9 case harden roller en19 side plate, link ss410 pin pitch 200 as2 agmt pin of cs harden 20mncr5 tempd every 4th link for 60 tbl.drawing , pin material grade ss410 duly hardened tempered and ground suitable for 60 tonnes 200 mm pitch bagasse carrier chain as per drawing , bush , material grade ss410 suitable for 60 tonnes, 200 mm pitch bagasse carrier chain as per drawing , roller of material grade en9 suitable for 60 tonnes 200 mm pitch bagasse carrier chain as per drawing , inner link of material grade en19 suitable for 60 tonnes, 200 mm pitch bagasse carrier chain as per drawing , outer link attachment of material grade en19 suitable for 60 tonnes, 200 mm pitch bagasse carrier chain as per drawing , outer link round of material grade en19 suitable for 60 tonnes 200 mm pitch bagasse carrier chain as per drawing , outer link slotted of material grade en19 suitable for 60 tonnes 200 mm pitch bagasse carrier chain as per drawing , as2 swilled arrangement with pin of carbon stee 20mncr5 hardened and tempered suitable for 60 tonnes, 200 mm pitch bagasse carrier chain as per drawing , spare pin of carbon steel 20mncr5 of above swilled arrangement with split pin suitable for 60 tonnes, 200 mm pitch bagasse carrier chain as per drawing , cane carrier chain fabricated type with 200 mm standard pitched is8465 with case hardened 41cr4 roller, en353 pin and bush suitable for 60 tonnes breaking load.as per drawing , cane carrier slat, 6 mm thk 2040 lg material gr. e250, is 2062-2011 as per drawing , chain bush duly case hardened, tempered ground en353 suitable for 60 tonnes 200 mm pitch cane carrier chain as per drawing , roller plain duly case hardened, 41cr4 suitable for 60 tonnes 200 mm pitch cane carrier chain as per drawing , pin with castle nut with galvanised split pin, duly case hardened, tempered and ground, en-353 suitable for 60 tonnes, 200 mm pitch cane carrier chain as per drawing , inner attachment link, made of 41cr4 suitable for 60 tonnes 200 mm pitch cane carrier chain as per drawing , outer link round made of 41 cr4 suitable for 60 tonnes 200 mm pitch cane carrier chain as per drawing , chain outer link slotted made of 41cr4 suitable for 60 tonnes 200 mm pitch cane carrier chain as per drawing , forged steel block type rake carrier chain 229 mm pitched with castle nut locking arrangement ss bush and ss pin of ss410 material, suitable for 80 tonnes breaking load.as per drawing , pin thread with castle nut , material grade ss410 suitable for 80 tonnes 229 mm pitch rake carrier chain as per drawing , small bush , material grade ss410 suitable for 80 tonnes 229 mm pitch rake carrier chain as per drawing , big bush , material grade ss410 suitable for 80 tonnes 229 mm pitch rake carrier chain as per drawing , bush , material grade ss410 suitable for 80 tonnes 229 mm pitch rake carrier chain as per drawing , forged attachment link, material grade en9 suitable for 80 tonnes 229 mm pitch rake carrier chain as per drawing , chain bagasse carrier with en 353 case hardened roller, 41 cr4 side plate side link en 353 pin, pitch 200 with as2 swil agmt pin of cs 20mncr5 hardened and tempd every 4th link for 60 tbl. drawing , pin material grade en353 duly hardened, tempered and ground suitable for 60 tonnes 200 mm pitch bagasse carrier chain as per drawing , bush plain , material grade en353 suitable for 60 tonnes, 200 mm pitch bagasse carrier chain //bid details 2 / 39 as per drawing , roller of material grade 41cr4 suitable for 60 tonnes 200 mm pitch bagasse carrier chain as per drawing , inner link of material grade 41cr4 suitable for 60 tonnes 200 mm pitch bagasse carrier chain as per drawing , outer link attachment of material grade 42cr4 suit