Latest cane lathi Tenders | Government cane lathi Tenders

corporations/Associations/Others

CTN :41022369

16 Jul, 2025 NA

Guwahati - Assam

Tender For auction sale of scrap plastic,rubber scrap,door body panel, boot, trunk,leaf spring,battery,sheared body scrap truck,e-waste,bale body scrap,tyre with rim cv,seat scrap,fabric scrap,glass scrap,wood,differential with dead axle,fuel tank,defaced engine cv,defaced engine 4w,alternator starter,mix steel,cut chassis scrap

CTN :40923727

17 Jul, 2025 9.44 Lacs

Koppal - Karnataka

Tender For corrigendum : sindogi anganavadi building - sinda providing and fixing water closet squatting pan, sinda providing and laying ceramic glazed floor tiles of size 300x300 mm, sinda providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick, sinda providing and laying vitrified tiles in different size of tile 600mmx600mm, sinda painting with synthetic enamel paint of approved brand, sinda finishing walls with acrylic smooth exterior paint , sinda wall painting with acrylic emulsion paint of approved brand, sinda providing and fixing m s grills, sinda providing & fixing of 3 track x 2 panel sliding windows made out of multi chambered upvc matching to ral-9016 sections , sinda providing and fixing wpc wood polymercomposite solid plain flush door shutter of required size, sinda providing and fixing factory made single extruded wpc wood polymer composite solid door, sinda providing and fixing flush door shutter made out of solid core block board, sinda providing salwood frames of doors, sindamason class i with tools, sinda burnt bricks class 35 non modular, sinda binding wire, sinda tmt bars fe 500, sindajungle wood runners and planks, sindacasurina poles 100 - 150 mm, sinda silver oak or equivalent planks 38 mm thick, sindahom of vibrator 0.71 days, sinda plasticizer super plasticizer, sinda size stone 20 x 20 x 25 cms, sinda boulders, sinda mixer (concrete small used in culvert), sinda bond stone 20 x 20 x 45 cm, sinda rubble stones, sinda mixer concrete 1 cum capacity, sinda portland cement, sinda broken stone aggregate 12 mm to 10 mm size, sinda broken stone aggregate 20 mm size, sinda broken stone aggregate 40 mm size, sinda add watering charges at 1 percent on material, sindacoarse sand zone iii, sindagranite/trap broken metal 100 mm and down size

CTN :41012404

17 Jul, 2025 NA

Chamoli - Uttarakhand

Tender For supply of manufacturing and supply of structural items of fol shed of size 4200 x 3200 x 3000 mm using mild steel structure , side walls stores using 0.60mm of ppgl sheets , roofing sheets as per ts , ms doors as per ts , self screw for fixing of roof size as reqd on site. , star screw full thread 25 mm isi mark , nuts and bolts 8mm dia 60mm to 120mm long with washer , gi j hook 8mm with 1 nut 2 bitumin washer and limped washer , rivit of 500 nos , led tube light complete set 18w 4 feet long , switch piano flush type , pvc switch board 6 inch x4 inch , pvc casing and capping of size 25 mm , wire single core copper conductor 2.5 sqmm , mcb 10 amp sp , armoured cable10 sqmm 4 core copper , lt panel board factory fabricated , shelves for storage 2100 mm x 450 mm x 750mm , insulation tape 45 mtr with isi mark , change over switch 100 amp 04 pole , ceiling rose. , service wire 10 sq mm flat 2 core aluminium connector cable , gi wire 14swg , fire extinguisher 6 kgs abc dry powder stored pressure type , paint for touch up green , paint for touch up black , distemper , plywood as per ts , scantling teak wood size 140 to 160 inch , frp storage tank conforming to ul 1316 of capacity 5kl with standard accessories , wire single core copper conductor 2.5 sq mm , pvc pipe 100 mm dia , gi elbow 20mm , gi gate valve connector , gi socket 20mm with thread , gi union 20mm , pvc flexible hose pipe 20 mm dia , lightening conductor made of copper tube with five copper prongs of length 15 cm with complete stores , industrial fuel transfer pump automation grade , provision of fire extinguisher 50 kgs abc dry powder stored pressure type trolley mounted. , hdpe tarpaulin of size 30 feet x 30 feet , ordinary portland cement grade 43 , coarse sand , stone aggregate 20 mm , stone aggregate 40 to 60 mm , 10 mm tmt bar , connected stores as per final design

State Government

CTN :40989696

19 Jul, 2025 NA

Bolpur - West Bengal

Tender For supplying of non scheduled miscellaneous items for kashinath smriti community hall (p-i) under bolpur municipality.-, "bed with head board a. bed structure ( 72"" x 78"") base frame: rectangular platform with support underneath. mattress support: plywood sheet or slatted structure. legs or box base: can be a storage box or stand-alone legs.b. headboard fixed to the bed or wall-mounted. can be plain, cushioned, or designed with cnc cut panels.3. materials usedpart material thickness notesmain structure commercial or bwp plywood 18 mm or 19 mm bwp preferred for moisture resistancesupport inside plywood or hardwood batten 1""x2"" or 2""x2"" used for framing and supporttop panel plywood sheet 1218 mm for mattress baselaminate/veneer decorative finish 0.8 mm 1 mm for aestheticsedge banding pvc/wooden strips 0.452 mm to cover edges of plywoodupholstery (optional) foam + fabric 12 inch foam for cushioned headboards4. types of plywood recommendedtype grade usemr (moisture resistant) interior budget furniturebwr (boiling water resistant) moderate water exposure bedroom, semi-wet areasbwp (boiling waterproof / marine) premium long-term durability, ideal for beds5. design options headboard types:o plain ply with laminate/veneero upholstered (foam + fabric/leatherette)o cnc-cut mdf panel over plyo backlit designs (led strip behind panel) storage bed options:o hydraulic lift-up systemo drawer storage on sideso box storage with lids", "tea table with 8 mm toughned glass????? 2. materials breakdownpart recommended material notestable top 8 mm toughened (tempered) glass heat and impact resistant, safe if brokenbase frame plywood, mdf, metal, or solid wood structure and stabilitylegs/support metal (ms/ss), wood, or ply choose as per aesthetic industrial or wooden lookfinish veneer, laminate, pu, powder coat aesthetic outer layer on wood or metaledge rubber (optional) pvc/silicon edge lining for child safety or anti-slip finish________________________________________???? 3. standard dimensionstable size width x length height suitable formedium 24"" x 36"" (60x90cm) 16""17"" standard living room.________________________________________???? 4. glass optionsfeature descriptiontype toughened/tempered safety glassthickness 8 mm (standard); strong enough for daily useedge polished edge or beveled edgecolor clear, frosted, black, bronze, grey tintedshape rectangle, square, round, oval________________________________________????? 5. design optionsa. modern wood + glass wooden or plywood frame with clear glass on top legs in straight or angled form veneer or laminate finish for sleek lookb. metal + glass ms or ss powder-coated frame industrial or minimalist design can include a second glass shelfc. storage table drawer or open shelf below glass top great for books, remotes, coastersd. cnc/cut-out ply decorative cut-out panel under the glass enhances aesthetics through transparencye. floating glass design glass mounted on metal studs, appearing to float above base", "round tea table????? 2. materials breakdownpart recommended material notestable top 8 mm toughened (tempered) glass heat and impact resistant, safe if brokenbase frame plywood, mdf, metal, or solid wood structure and stabilitylegs/support metal (ms/ss), wood, or ply choose as per aesthetic industrial or wooden lookfinish veneer, laminate, pu, powder coat aesthetic outer layer on wood or metaledge rubber (optional) pvc/silicon edge lining for child safety or anti-slip finish________________________________________???? 3. standard dimensionstable size width x length height suitable forsmall 18"" x 30"" (45x75cm) 15""16"" (3840cm) compact living spacemedium 24"" x 36"" (60x90cm) 16""17"" standard living roomlarge 30"" x 48"" (75x120cm) 17""18"" spacious interiorsheight should be roughly level with your sofa seat height.________________________________________???? 4. glass optionsfeature descriptiontype toughened/tempered safety glassthickness 8 mm (standard); strong enough for daily useedge

CTN :40859793

28 Jul, 2025 NA

Hooghly - West Bengal

Tender For procurement of equipment, instrument, machineries, tools etc. related to laboratories and workshops of mechanical, electrical, civil, chemical engineering and science and humanities departments of hooghly inst of tech. - v notch channel test section: size: 250mm wide, 180mm deep; 600mmlong.materials : made with m.s lined with fiber or s.s 304baffle and deepened entry section for steadying water supply.arrangement for 7 fixing interchangeable notches.set of three brass notchesv notch (60 , 45 ).rectangular notch, electric oven size: 24 x 24 x 24- 03 shelvesspecification: vertical model , triple walled construction: front opening door, top mounted control panel for easy access, inner wall made of stainless steel with mirror polish, outer body made of mild steel with powder coat finish electrically operated thermostat with corresponding indicators. nichrome made long lasting heating elements, high grade glass wool insulation, g.i. made wire mesh shelves with adjustable runners., adsorption isotherm apparatusmagnetic stirrer in multi-position 6 and erlenmeyer flasks with lids (125 ml. - six nos.), distillation unit 1.distillation column : material stainless steel, dia 110mm, seven sieve trays.pressure gauge: bourdon type, 0-2 kg/cm2.rotameter: for cooling water flow rate measurement.steam generator: made of stainless steel, provided with pressure gauge & level indicator, safety valve & insulated with ceramic wool and cladding with aluminium foil.reflux divider: special arrangement to change r/d ratio automatically. condenser: shell & tube type made of stainless steel.bottom product tank: made of stainless steel, capacity 5 ltrs.distillate tank: made of stainless steel, capacity 5 ltrs.heater: nichrome wire heater.temp. sensors: rtd pt-100 typecontrol panel comprises of:digital temp. controller : 0-199.9 c, for steam reboilerdigital temp. indicator : 0-199.9 c, with multi-channel switchwith standard make on/off switch, mains indicator etc.2. flow measurement: rotameter for cold water for condenserdistillation still: material- stainless steel, capacity 5 ltrs (approx.) insulated with ceramic wool and cladding with aluminum foil.condenser: concentric tube type (material- stainless steel)distillate tank: material- stainless steel, capacity 2 ltrs.heater: nichrome wire heater.control panel comprises of :digital temp. controller: 0-199.9 c, rtd pt-100 type (for steam generator)digital temp. indicator: 0-199.9 c with multi-channel switch.temp. sensors: rtd pt-100 typewith standard make on/off switch, mains indicator, set up to determine the linear expansion co-efficient of a metal rod.material of metal bar: copper, length of metal bar(total):500mm, dia: 25mm, no of thermocouples mounted on the bar:6 , no of thermocouples in the insulated shell: 2, heater: band type, cooling jacket dia:75mm, no of thermocouples:10, ammeter: 0-5amp, voltmeter: -0-300v, dimmerstate:1000w, temp indicator: 0-300oc, experimental set up of bricks/walls in series for conductivity measurementdiameter of slab:0.3 m, thickness of bakelite, wood and ms plates: 0.012 m, temp of indicator: 0-300oc, ammeter - 0-5amp, voltmeter- 0-300v,heater: mica type, dimmer state: 1000w, vacuum filtration apparatus with buckner funnel apparatus.material porcelain, for use with (application)suction filtration, product type buchner funnel, glass reciver - 2000 ml, 5000ml , (customised), grade 41 filter paper pkt/ 100, concentric tube heat exchanger apparatusinner copper tube i.d, 12.7mm. and outer g. i. pipe i. d. 15mm. approx. and 1.5m. length.2. thermometers - 4 nos.3. measuring flask - 1 lit. capacity.4. geyser-3 kw. single phase.services required-1. 220v, 15a, stabilized single-phase ac supply.2. floor area - 3m x i m x 1 m height.concentric tube heat exchanger: (a)plain tube ( water to water ):the apparatus consists of two concentric tubes. inner tube consists of copper tube through which hot water flows. while the outer tube consists of gi pipe through which cold wat

Central Government/Public Sector

CTN :40746664

15 Jul, 2025 49.00 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : periodical services(internal) including repairs to flooring,sanitary and plumbing items works in otm and md accn at ridge, raulki area under age b/r-i of ge satwari - notes : (1) work will be carried out upto 4th storey of bldgs and quoted rates of items shall be deemed to include the cost of necessary formwok and scaffolding required as per site conditions., taking down shutters of any description exc 1.00 sqm and not exc 2.00 sqm each and removing from the site complete all as specified & directed., taking down chowkats or frames with shutter (without taking off shutter from the frame) n. exc 1.5 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed., taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.5 sqm & n. exc 4 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed., demolition of cement concrete (un-reinforced) in ground floor to 4th floor and pavings n exc 15 cm thickness (below or above ground level ) and removing the rubbish from the work site to out side defence premises complete all as specified and directed., demolition of concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed., taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubing down with water etc and removing unserviceable material outside defence land complete all as specified and directed., dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed, s&f pressed steel frames of size 125mm x 60 mm made out of size 1.25 mm thick ms sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weright and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type b-1 including pcc 1:3:6 type c1 as in back fill to chowkats complete all as specified and directed., s&f pressed steel frames of size 105mm x 60 mm made out of size 1.25 mm thick ms sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weright and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type b-1 including pcc 1:3:6 type c1 as in back fill to chowkats complete all as specified and directed., s&f 35 mm thick factory made 2nd class hard wood, plain, framed, panelled shutters (two panels) with lock rail and panel of 9mm thick bwp commercial plywood .the size of rail and stiles as per is: 1003(part-1), kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed., s&f factory made 35 mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in ssr part i, section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed, m&l for 30mm thick factory made flush shutters, solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed., s&f in repair solid pvc door frame of size 50mm x47mm made out of 5mm plain colour pvc sheet reinforced with mild steel square tube, supplying and fixing in opening

State Government

CTN :40950396

24 Jul, 2025 NA

Mandla - Madhya Pradesh

Tender For supply of building material - door frame (sal/saja wood) size 3'6''x7'0'' (thickness 5x2.5 inch) with hole hanging, door frame (sal/saja wood) size 2'9''x7'0'' (thickness 5x2.5 inch) with hole hanging, door door panel - flesh door laminated with myka (myka 0.92mm both sides) thickness 30mm size 3'6''x7'ft with fittings, door panel - flesh door laminated with myka (myka 0.92mm both sides) thickness 30mm size 2'9''x7'ft with fittings "ventilation (sal/saja wood) - size 2'0''x1' 6''ft (thickness 5x2.5 inch)complete set"

CTN :40830467

21 Jul, 2025 12.31 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for admin building, institutes and other buildings and otherphysical facilitys works at jitnagar ta. rajpipla. dist. narmada (package-3) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying & placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 45010 mm(d) x 45010 mm(w) and back size shall be 45010 mm(w) x 40010 mm(h) from seat. overall height shall be 82010 mm, overall depth 53010 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is: 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., benches- supplying and placing three seater bench that shall be constructed from metal frame. the seat and back shall be made of high quality cold rolled ms sheet of 1.2m thick, pressed and welded to form the shape. the seat and back sha

CTN :40830502

16 Jul, 2025 6.14 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for staff quarters and other physical facilitys works at jitnagar ta. rajpipla. dist. narmada. (package-2) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., library coffie table- supplying and placing center table in with an overall size 1200mm x 600mm x 450mm (h) that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywood with both side laminate finish. the four side of the table is provided 150 mm wide 18 mm thick play under the main work top plywood. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top frame and base frame and legs shall be supported on ms rectangle pipe frame having cross-section area 25mm x 25mm with 1.2mm thick with powder coated. there shall be ppcp shoe provided at the bottme to avoid scetching on the floor., side unit shall be provided with the bed at both side with an overall size 450mm x 450mm x 550mm. the side unit shall be made of 18mm thick waterproof plywood with both side laminate. it shall be supplied with one sliding drawer and one open drawer., dining table with six chairs, supplying & placing dining table with six chairs an overall size 1800mm x 900mm x 750mm. the top of the table shall be made up of 18mm thick teak wood. the top profile shall be in rectangular wooden shape with the edges shall be in chamfer shape. the under structure shall have teak wood having size 75mm x 75mm round shaped legs with melamine polish.there shall be shoe provided at the bottom to avoid scratches on the floor. dinning chair. the seat shall be made of 12mm thick waterproof plywood and season/teak wood frame upholstered with high resilience polyurethane foam 40mm thick having density 40kg/m with leatherite tapestry 0.8mm thick and 535 gsm and the back shall be made of season/teak wood malemine polish finish frame. the frame structure shall be supportd by four legs made up of season/teak wood malemanie polish finish of size 50mm x 50mm. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 41010 mm(d) x 45010 mm(w) and back size shall be 44010 mm(w) x 56010 mm(h) from seat. overall height shall be 100010 mm., providing and supplying corner table with an overall size 600mm x 600mm x 410mm. the top should be made up of 75mm thick, it would be 25mm at mid and 75mm at sides. the mdf top should have decorative finish with approved veneer and pu polish accordingly. the understructure shall consist of 4 nos. of ms sheet gold leg with 6mm thick., providing and installation of large tv unit, carcass panel shall be made of 18 mm prelaminated waterproof plywood with edge banding 2 mm thickness on visible sides. drawer bottom shall be made of 12 mm thick prelaminated waterproof plywood. 4 drawer front shall be made of 18 mm thick prelaminated waterproof plywood with edge banding 2 mm thickness on visible sides. all drawers shall be fitted with knobs.top shall

CTN :40830509

19 Jul, 2025 12.64 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for hostels, mess building and other physical facilitys works at jitnagar ta. rajpipla. dist. narmada package-1 - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying and placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 450 10 mm(d) x 450 10 mm(w) and back size shall be 450 10 mm(w) x 400 10 mm(h) from seat. overall height shall be 820 10 mm, overall depth 530 10 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., wardrobe - single unit- single shuttered single unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 450mm (w) x 500mm (d) x 1870mm (h). storage shall have 4 nos. of adjustable shelf. the doors shall be opera

Cane Lathi Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

Central Government/Public Sector

State Government