Latest canopy spares Tenders | Government canopy spares Tenders

State Government

CTN :45651300

01 Jul, 2026 1.68 Lacs

Panchkula - Haryana

Tender For providing and fixing of contractor block and other electric components at various t wells in sector 5 panchkula - 24.5.1.6:- miscellaneous items 1.6. supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 16 sqmm [through rate], 20.114.9:- supplying erection, testing of fully automatic electric control panel board for t/wells in pump chamber consisting of ms sheet of thickness 14 gauge duly painted box type floor mounted made of angle frame containing 1 no. fully automatic air brake starter suitable for motor of the following capacity, min switch of suitable range with hrc fuse, 1 no. volt meter (0 to 500 volts), 1 no. amp. meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in electric control panel board complete in all respect as per specification given in schedule no. ii, including mcb, suitable, capacitor, wooden box etc as per site requirement complete in all respect. 9. 50 hp motor [through rate], 20.10.3 :- extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest railway station to site of works 3. 150 mm i/d [through rate], 20.11.3 :- providing and fixing cast iron double flanged swing check type reflux (non return) valves pn-1.6 marked with is:5312 including nuts and bolts marked with is:1363, rubber sheet marked with is:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-incharge 3. 150 mm i/d [through rate], 20.84:- providing and fixing of insulated rubber matting suitable for 11 kv installation 1 m x 2 m x 12 mm thick (is code 15652-40091) as per specification complete and as per directions of engineer-in-charge [through rate], ns item:- providing and fixing of contractor block mnx 80 landt make as per satisfaction of engineer-in-charge and attesting on load, ns item:- hiring of electronic borewell camera for videography 350 deep borewell urgently required for internal photography complete in all respect to the entiresatisfaction of engineer-in-charge, ns item:- measurement of discharge at tubewell of 1 hr after opening of upper bend with help of discharge flow meter including dismantling and reassembling of tee bend with help of chain block labour tool and plantcomplete in all respect (note any damage to site and material is responsibilityof the contractor)

corporations/Associations/Others

CTN :45649547

29 Jun, 2026 7.05 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing m.s.flat iron railing for parks in furniture market sector 34, chandigarh under ward development fund.

CTN :45665954

03 Jul, 2026 1.20 Lacs

Leh - Jammu And Kashmir

Tender For supply of flat panel full hd 43 inch , set up box dth , iron tin sheet 12 by 3.5 feet , iron tin sheet 16 by 3.5 feet , square iron pipe 20 feet

CTN :45666378

14 Jul, 2026 28.03 Lacs

Bhopal - Madhya Pradesh

Tender For supply of granite stone slab upto 0.50 sqm , granite stone slab above 0.50 sqm , 1st quality ceramic glazed wall tile , wood work in frames of doors , isi marked flush door shutters , lipping with 2nd class teak wood battens , wire gauge shutters , providing and fixing m.s. grills , 40x5 mm flat iron hold , stainless steel butt hinges , decorative high pressure laminated sheet , zinc alloyed , double charge vitrified tile 800x800 mm , glazed vitrified tiles matt , vitrified tiles , grouting the joints of flooring tiles , polished granite stone slab colour of black , 15 mm thick densified tegular , 12 mm cement plaster , 15 mm cement plaster , synthetic enamel paint , applying of white cement , wall painting with premium acrylic emulsion paint , applying priming coats with primer , removing white or colour wash , dismantling of area 3 sq. metres and below , dismantling tile work in floors , disposal of building rubbish, malba , cp brass 32mm , 600x450 mm beveled edge mirror , cpvc pipe 25mm , cpvc pipe 20mm , aluminium work for doors , aluminium work for shutters of doors, windows , glazing in aluminium door , wood polymer composite , wire guage , drapery rods of 28 mm , ss sliding door bolts 300 x 16mm , ss sliding door bolts 250 x 16mm , ss sliding tower bolts 250 mm , ss sliding tower bolts 100 mm , ss door handle , cp brass angular stop cock , overhead shower , glass shelf , towel rack , toilet roll holder , two way bib cock , hand shower , water closet , counter top wash basin , deduct for taking away dismantled doors , deduct for taking away of pvc cistern , deduct for taking away of c p pillar cock , deduct for taking away of ms windows shutte

CTN :45568248

29 Jun, 2026 25.00 Lacs

Karnal - Haryana

Tender For corrigendum : supply of material required for making of iron tree guards and related items at hfdc saw mill mangalpur karnal - material details, 25x25x3 mm angle iron vertical 2 mm long, 25x5 mm ms flat rings, 1.55 m high welded mesh 50x75 cm size of 3 mm thick wire, name plate 20x10cm 20 gauge, 30 mm long nuts bolts, primer isi brand for iron, branded paint for iron

CTN :45630893

29 Jun, 2026 NA

Attingal - Kerala

Tender For 3226122/26,attingal municipality supply of kitchen and pooja items for town hall- chembuvarppu. supplying the pure copper, min 3mm thick, hand hammered, tin lining inside mandatory brass handles heavy duty size, 1500lit capacity , aluminium valiya ( alloy uruli large) supply and stacking hindalium/heavy gauge aluminium capacity 100l having 4mm+with lid, andav/chembu supply and stacking copper with tin lining mix of 5lit to 20lit, basin, supply and stacking ss304 grade dia various 18" to 22" having min thickness of 0.8mm, steel thotti, supplying and stacking ss304 grade capacity various from 10lit to 15lit with handle, chattukam, supplying and stacking iron/cast iron dia various from 24" to 30" with wooden handle, koruva chattukam, supplying and stacking cast iron koruva chattukam, supplying and stacking kuthupponi stainless steel perforated ladle, long handle 3 feet, supplying and stacking arippa charuvam materials the copper with tin lining capacity of 50lit to 80lit for washing the rice, supplying and stacking kettle make with stainless steel ss-304 capacity of 5l to 10 l, supplying and stacking ss-304 thavi-steel,flat ladle, 2 ft handle, supplying and stacking steel spoon ss-304 having 12'' to 15'' serving spoon, supplying and stacking cup-steel having ss-304 capacity of 200 ml, supplying and stacking dheda-alloy having aluminium material large vessel 80lit, supplying commercial high pressure gas stove burner double ring isi marked aduppu, supplying aluminium mug make with aluminium having capacity 1 litre, supplying stainless steel (ss 304) mug having capacity 1 litre, supplying stainless steel (ss 304) idli kuttuka having 200 idlis at a time with trays and lid, supplying gas aduppu having single burner, isi marked for small cooking, supplying virak aduppu having firewood stove make with iron and portable., supplying grinder with tilting wet grinder capacity of motor 1.5 hp with isl mark of 15 lit, " 10 lit, pooja items, supplying para + 1 idangazhi material with brass bronze traditional kerala para, supplying ammayi vilakku + maravilakku material with brass having 2 ft with handcrafted., supplying panineer spray with brass / silver plated for rose water, supplying thalapppoli vilakku materials of brass with hand held plate with lamp, supplying thattam materials with brsss/ bronze dia of 12'' to 15'', supplying valiya vilakku materials of brass having 5 feet height nilavilakku, supplying cheriyavilakku having brass materials having 2 feet height nilavilakku, supplying thattam having stainless steel (ss-304) dia with 15'', supplying iripidi palaka having wood type low stool for sittting, supplying laminated ,framed having size 18''x 24'' min of sreekrishnan,narayanan photo, supplying chandanakinnam having brass/stone for sandle paste, supplying waste collecting bucket having heavy duty plastic 60 l with lid & pedal color coded small & large size

CTN :45634855

06 Jul, 2026 NA

Badaun - Uttar Pradesh

Tender For supply of m s flat iron 65 x 6 mm , m s flat iron 25 x 6 mm , spring steel 40 mm x 6mm , m s round bar size 36 mm , m s round bar size 28 mm , m s round bar size 22 mm , m s round bar size 16 mm , m s square bar size 25 mm , m s square bar size 20mm , m s square bar size 16mm , m s square bar size 12mm , m s square bar size 08mm

CTN :45648214

02 Jul, 2026 NA

Bathinda - Punjab

Tender For supply of chisel size 150x14 mm , ball peen hammer with fiberglass handle weight 450g , ball peen hammer with fibergalss handle weight 1130g , centre punch sizes 100 mm 150 mm set , wire brush standard set of 6 , sledge hammer with 3 head weights , allen key set of 4 sizes , allen key set of 10 pcs , hacksaw frame size 1 , hacksaw blade 1x12x2 , hacksaw blade 1x12x1 , feeler gauge set of 26 blades in metric , steel rule of length 12inch 300mm to scale , steel rule of length 6inch 150mm to scale , steel measuring tape 5mtr , fiberglass measuring tape 15 mtr , fiberglass measuring tape 30 mtr , spirit level with magnet 30 cm , spirit level with magnet 60 cm , round file set 4 inch , round file set 6 inch , flat file set 4 inch , flat file set 6 inch , half round file set 4inch , half round file set 6inch , oil can for lubricat , manual grease gun of 500ml capacity , manual grease pump of 15kg capacity , tool chest with trol , tool box with 3 comp , iron hammer of weight 500gm with wooden handle , iron hammer of weight 2 kg with wooden handle , hydraulic jack of 50 tonne capacity along with handle , hydraulic jack of 10 tonne capacity along with handle , hydraulic jack of 25 tonne capacity along with handle , sling ropes of 3by4 inch and 3m length , sling ropes of 3by4 inch and 5m length , sling ropes of 1 inch dia and 5m length , sling ropes of 1 inch dia and 3m length , sling ropes of 3by4 inch and 1m length , lifting belt 1tx3m , lifting belt 3tx3m , lifting belt 5tx5m , lifting belt 10tx6m , d to shackles set 1 t , d to shackles set 3 t , d to shackles set 5 t , d to shackles set 10 t , 5 inch angle grinding machine , portable air blower , mechanical screw jac , supply of portable i , ultrasonic thickness , torq wrench 25 to 135nm , impact skts 0.5 inch , torq wrnch 135 to 675nm , impact skts 0.75 inch with 9 sizes , ratchet type torque wrench 540 to 1380nm , impact sockets 1 inc , dial gauge 5mm , dial gauge 10mm , magnetic stand main stem 150 branch stem 150 , vernier calipers range 0 to 8 inch lc to 0.01mm , vernier calipers range 0 to 12 inch lc to 0.01mm , gauge tapewith cali , shims 40x40mm , shims 50x50mm , shims 75x75mm , shims 100x100mm , metal scissor 10 inch , digital outside micrometer range 0 to 25 mm lc to 0.001mm , dial bore gauge 50 to 150 mm , digital depth gauge range 0 to 150 mm lc to 0.01mm , inner calipers of size 6 8 10 and 12 inch , outer calipers of size 6 8 10 and 12 inch , inside and outside circlic plyers straight 7 to 12 inch size , inside and outside circlic plyers bent 7 to 12 inch size , pitch guage 0.4 to 7mm , bearing induction he , numerical and alphabetical punch set , digital tachometer , hydraulic forklift

CTN :45291665

24 Jun, 2026 NA

Nilgiris - Tamil Nadu

Tender For bid to ras supply of tata iron fencing chain link net for fencing mesh d fence , l angel , concertina coil , flat paitta , 10mm round rod 345 nos , barbed wire 2mm thickness , bolt nut washer 12mm thickness , painting work , cement concrete using 20mm metal m sand cement , labour bush cutting and labour.

State Government

CTN :45558226

24 Jun, 2026 34.31 Lacs

Chamba - Himachal Pradesh

Tender For corrigendum : tender for prov. and fixing of equipment / material , design, erection, testing , commissioning for sop to jsv for inspection hut at cheel bangla chowari by prov. 11/0.4 kv 100 kva dtr along ht, lt line in es chowari-ii (u) esd chowari ed dalhousie - (a) supply part-11/.4 kv 100 kva distribution sub station, 11/.4 kv 100kva dtr (rec sep. ord 11/1976, prov. st pole pole 9 mtr. long w/l 220kgs, muff for steel tubular pole with concrete filling, x-arm: [channel iron (100x50x5 mm), length : 2800 mm x 2 nos] for incomer line, ms a.i.(50x50x6 mm), length: 2800 mm x(2 nos for las ), x-arm: [channel iron (75x40x5 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer], ms a.i.(50x50x6 mm), length: (2800 mm) x 1 no., ms a.i.(50x50x6 mm), length: (950 mm) x 2 nos. of bed knee bracing, ms angle iron (50x50x6 mm), length : (2800 mm) x2 nos for transformer lt distribution box and g.o switch fixing assembly, g.i. wire for earthing, ms angle iron (50x50x6 mm), length : (450 mm)x1 nos for transformer lt distribution box and g.o switch fixing assembly, g.o. switch handle supporting: [c.i. (75x40x6mm), length: 460mm for transformer lt distribution box and g.o switch fixing assembly, g.o ab switch unit (11kv,400,663ka) tripple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class, discs insulator sets (comp. 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) i/c dead end clamps etc.), stay set complete, stay wire (7/3.15mm)( 10 kg per stay set), pipe earthing with gi,charcoal & salt, prov. lt distribution panel with mccb (160 a, 10 ka, 4p,1 no.) & sfu (32 a 5 no. rewireble) for 100kva trf. as per specification, half clamp (m.s. flat 50x6), full clamps (m.s. flat 50x6), m. s. nuts & bolts off sizes (galvanised coated) [prefarably 16mm or more (with flat and spring washer), aluminium thimbles 300 mm sq., copper thimble 200 mm sq., danger plate, barbed wire (rec sp f 3/1981), lt cable 3-1/2 core-185mm sq., alluminium paint, prov.acsr, 6/1/3.35 mm, chain link fencing , angle iron, gate etc. for transfromer fencing, prov. transformer bed plinth for 1x400kva s/stn structure complete with cc 1:6:12 r.r. massonery & plastering etc. a/w chain link fencing, angle iron gate etc. for dtr fencing., lt switched caapcitors 36-kvar for 100 kva dtr, trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure)., supplying and stacking of good earth at site including royalty and carriage upto 5 k m lead complete (earth measured in stacks will be reduced by 20% for payment)., fine dressing of the ground., spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately)., supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : screened through sieve of i.s. designation 20 mm, filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded)., providing and fixing korean grass turf superior qualitywith earthy 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (dhurmos) and than rolling the surface with light roller make the surface smoothen and light, watering with sprinkler and maintenanc

Canopy Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

State Government