Latest canopy structure Tenders | Government canopy structure Tenders

CTN :45317113

05 Jun, 2026 NA

Pratapgarh-Up - Uttar Pradesh

Tender For corrigendum : painting on old rusted steel surface of gates and superstructure of allahabad and pratapgarh branch and mirzapur aihari escape ssfc raebareli.

CTN :45404349

26 Jun, 2026 NA

Sealdah - West Bengal

Tender For zonal work for general repairs and maintenance of steel bridge works minor and major (superstructure) in suburban section all over sealdah division. [zone no.40 for the period ending 30.06.2027]

State Government

CTN :45367498

19 Jun, 2026 NA

Delhi - Delhi

Tender For providing of custom bid for services - addition & alteration construction of bio-chemistry lab at second floor. - dismantaling and disposal work; (a) first floor roof existing fibre sheet removal and disposal (16x5)feet , (b)second floor(bio chemistry) existing brick wall 9" th. dismantling and disposal , ( c) existing window removal (6x4'-6") , (d) existing floor dismantling and disposal , " 6.4.1 brick work with common burnt clay f.p.s (non modular) bricks of class designetion 7.5 in superstructure above plint level in all shapes and sizes in cement mortar1:6(1cement 6 coarse sand) " , plaster inside 12mm with 1: 6 ratio with fine sand , external plaster 15mm 1 :4 ratio 18mm cement plaster in two coats under layer 12 mm thick cement plaster1:5 ( 1cement :5 coarse sand ) and a top layer 6mm thick plaster , providing and laying reinforcement work , providing and laying rienforce cement concrete in retaining walls including attatched pilasters, colmns,piers,abutments pillars,posts,struts,buttresses,string,or lacing courses,parapets,coping,bed blocks,anchor blocks window sills ,fillllets,sunken floor etc.up to floor five level ,excluding the cost of centering ,shuttering ,reinforcement and finishing (5.2.2) , floor and roof protection work ;(4.20a.2.2) concrete of m15grade with minimum cement content 240kg/cum , 11.49.2 floor tiles; providing and laying full body vitrifiedtile in floor of minimum thickness 15mm with water absorption less than 0.06% and confirming to is:15622,of approved make, brand and manufacturer.laid on 20 mm thick cement mortar 1:4 . including grouting the joints with white cement /matching grout size600x600 , skirting , structural steel work welded in built up sections /framed work including cutting ,hoisting ,fixing in position and applying a priming coat of approved steel primer using structural steel .(250x125) , "red stone for slab providing sand stone slab for roofing and laying them in cement mortar1:4 ( 1 cement : 4 coarse sand ) over wooden karris or rcc battens or structural steel section (karries or battens or or structural steel. " , providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: , counter slab stone work , 8.2.2 . providing and fixing 18mm thick gang saw cut mirror polished, premoulded and prepolished,machine cut for kitchen platforms ,vanity counters,window sills ,facias and similar locations of required size approved shade ,colour and texture laid over20 mmthick base cement mortar, joint treated with white cement mixed matching pigment,including rubbing curing ,moulding and polishing of edges excluding hosting and transportation , counterslab stone skirting , providing edge moulding to 18 mm thick marble/granite stone counter,vanities etc. , p\ fteak wood frame ,providing wood work in frames of doors windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasterners of requireddia and length( hold fastlugs or dash fastenershall be paid for separetely. , p\f flush door , providing and fixing is markedflush door shutters confirming to is ;22029 part 1) non decorative type core of construction with frame of first class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters (9.21.1) 35 mm thick including isi markedsteel but hinges with necessary screws , fixing of aluminium window with all necessary at site available at site , providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. , distempering with 1st quality acrylic distemper (ready mixed) having voc content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : , finishing walls with acrylic smooth exterior

CTN :45270249

02 Jun, 2026 NA

Pune - Maharashtra

Tender For corrigendum : supply of food service canopy structure

CTN :45292808

09 Jun, 2026 NA

Sonitpur - Assam

Tender For corrigendum : providing of living shelter ojl - superstructure of offr jco living shelter ojls of size 12 point 00 m x 7 point 60 m x 4 point 75 m height , cement 43 grade opc packed in hdpe bag each 50 kg wt , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , coarse aggregate 40 to 63 mm graded , stone for rr masonary less than 6 inch , mild steel bar of size 6 to 8 mm dia , mild steel bar of size 10 mm dia and above , water proofing compound , ms binding wire , quick setting compound , cement 43 grade opc packed in hdpe bag each 5o kg wt , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , bricks sub class b , bricks bats , mild steel bar of size 10 mm dia and above , pvc pipe 110 mm dia 3 mtr long , pvc pipe 75 mm dia 3 mtr long , pvc cowl 75 mm dia , ms binding wire , pvc socket 110 mm , quick setting compound , pvc bend 110 mm dia , cement 43 grade opc packed in hdpe bag each 5o kg wt , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , stone boulder 9 inch to 12 inch , pvc pipe 75mm each 3 mtr long , water storage tank triple layer 1000 ltrs , fabrication from structural steel section for staging of water storage tank made of capacity 500 oblique 1000 ltrs made out of ms angle iron frame of size 50 x 50 x 6mm thick , wc european type model 2008 ewc and combi flush pvc flushing cistern of 10 ltr capacity , looking mirror of selected quality frameless of size 600x450x5mm , chromium plated toilet paper holder with flap , brass chromium plated towel rail 600 mm long 20 mm dia with cloth hooks min 04 nos , chromium plated piller cock swan neck with aerator and butter fly handle , stop cock angular type chromium plated brass 15 mm weight , stop cock t type chromium plated brass 15 mm weight , brass chromium plated shower rose 100 mm dia with bend , bib cock long spout brass chromium plated 15 mm weight , pvc connection 45 cm long 15 mm , peg set of six fitted with galvanised screws along the internal surface of the walls in the rooms , corner sheet glass shelf with two shelf assembly , soap dish ss comma flat back complete with screw , 2000 ltrs anaerobic frp oblique ldpe septic tank alongwith all accessories , ppr pipe 32 mm dia , ppr pipe 20 mm dia , ppr socket 32 mm , ppr elbow 90 degree 32 mm , ppr elbow 20 mm , ppr female thread elbow 90 degree 20 mm dia , ppr female thread t 20 mm dia , ppr plain t 32 mm , ppr reducer t 32 to 20 to 32 mm dia , ppr union 32 mm , tank connector 32 mm , pvc wall clamp 32 mm , pvc wall clamp 20 mm dia , float valve 20 mm , gate valve 32 mm , m seal 150 gm pkt , taflon tape roll , solvent cement 150 gm tube , pvc waste pipe 32 mm and 1m long , chromium plated waste coupling 32 mm dia , non skid ceramic tiles of size 300mmx300mm on the floor minimum thickness shall be between 6 to 8 mm tiles , ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick , cp grating 100 mm dia , pvc pipe 110 mm dia 3 mtr long , pvc socket 110 mm dia , pvc bend110 mm dia , s trap vitreous china , curtain arrangement drapery and rod made of 25 mm dia and 1600 mm long alongwith fixing arrangement complete , pvc air pipe 32 mm dia , white cement , vitreous china wash hand basin white of size 450mmx300mm with vitreous china pedestal , ppr reducer elbow 32mm x 20mm dia , brass cp wall mixer for mixing hot and cold water screwed down for ppr pipe of dia 20mm , brass cp jet water spray for ewc , plastic dustbin of capacity 40 ltrs , distribution box 8 way spn comma 240 volts copper bus bar and neutral link earthing stud , mcb spn 240 volts 32 amps , mcb sp 6 to 32 amps , pvc tape 19mm wide 5 m long , cable pvc insulated electric cables heavy duty copper conductor of size 1 point 5 sqmm single core , cable pvc insulated electric cables heavy duty copper conductor of size 4 sqmm single core , cable pvc insulated electric cables heavy duty copper conductor of

Central Government/Public Sector

CTN :45324560

16 Jun, 2026 85.78 Lacs

Visakhapatnam - Andhra Pradesh

Tender For project supply, installation, testing and commissioning of 20nos radar and accessories. sh civil works at yarada visakhapatnam phase-ii - extra for concrete work in superstructure above floor v level for each four floors or part thereof by mechnical means., reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)., steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. a) thermo- mechanically treated bars of grade fe-500d or more., centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers, brick work with non modular fly ash bricks conforming to is:12894, class designation 10 average compressive strength in super structure above plinth level up to floor v level in :cement mortar 1:4 (1 cement : 4 coarse sand), providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete., float glass panes 4 mm thick glass pane (weight not less than 10kg/sqm)., providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete., providing and fixing is : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90 mm, fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately), providing and fixing factory made single extruded wpc (wood polymer composite) solid door/window/clerestory windows & other frames/chowkhat comprising of virgin pvc polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 n (face) & 1100 n (edge), minimum compressive strength of 58 n/mm2, modulus of elasticity 900 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with m.s hold fast/lugs/ss dash fasteners of required dia and length complete as per direction of engineer-in- charge. (m.s hold fast/lugs or ss dash fasteners shall be paid for separately). frame size 45 x 70 mm, providing and fixing factory made single extruded wpc (wood polymer composite) solid plain flush door shutter of required size comprising of virgin polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 n (face) & 900 n (edge), minimum compressive strength 50 n/mm2, modulus of elasticity 850 n/mm2 and resistance to spread of flame of class a category with property of being termite

CTN :45327373

04 Jun, 2026 30.00 Lacs

Chirawa - Rajasthan

Tender For rate contract for hiring goods of tent and decoration - chairs :pvc chair (1st day), subsequent day, steel pipe pedded chair (1st day), subsequent day, tables :centre table sunmica top 2x4 (1st day), subsequent day, wooden table 6 x 2 (babool) (1st day), subsequent day, wooden table 6 x 3 (babool) (1st day), subsequent day, floor covering :cotton durry (old). (1st day), subsequent day, cotton durry (new). (1st day), subsequent day, non woven synthetic carpet (red/green) (new) (1st day), subsequent day, non woven synthetic carpet (red/green) (old) (1st day), subsequent day, woolen carpet (1st day), subsequent day, white cotton chader (sheet) (washed) (1st day), subsequent day, pipe pandal hight up to 12 to 18 ft (1st day), subsequent day, 5mm galvanised iron (g.i) pipe 6mtr. long with new silk color flag (1st day), subsequent day, cotton mattress (1st day), subsequent day, dunlop mattress size 6x3. (1st day), subsequent day, massand with white cover. (1st day), subsequent day, speech stand having sunmica top. (1st day), subsequent day, white cotton cloth cover for padded chair including ribbon. (1st day), subsequent day, barricading with sal ballies as per design including tying with vertical post by coconut strings complete in all respect with two horizontal members hght 1.2 m upto 1.5 m above ground level and vertical supports up to2.5 centre and for 3 days period incl. (1st day), add extra in barricading for each subsequent day after 3 days.(1st day), vip chair leather cushion. (1st day), subsequent day, kanat 9x6 fixed with tent (1st day), subsequent day, kanat 9x6 fixed without tent (1st day), subsequent day, water proof tent with pipe pandal supported with bamboo and balli fram (1st day), subsequent day, curtain cloth (view cutter) made out of steel pipe frame with vertical height 12 feet covering with good quality white cloth to cut view including making holes and made necessary strengthening support against wind pressure complete.(1st day), subsequent day, jhalar/frill. (1st day) (1st day), subsequent day, rajai full size. (1st day), subsequent day, gate pipe. (1st day), subsequent day, stage pletform. 4 hieght, subsequent day, stage pletform. 1 hieght (1st day), subsequent day, mist fan. (1st day), subsequent day, desert cooler (1st day), subsequent day, padestal fan. (1st day), subsequent day, jumbo coolar. (1st day), subsequent day, water proof pandal on bans balli structure (1st day), subsequent day, iron pipe bearicating. (1st day), subsequent day, gas heater with cylinder (1st day), subsequent day, heritage printed canopy in various size (1st day), subsequent day, water proof truss (1st day), subsequent day, providing & placing without intermediate (support dome type superstructure of iron frame of 30 height at middle and 10 height at ends including new white ceiling cloth and jhallar on outer periphery including water proof tripal at top to be cemflus with white clothing complete) (1st day), subsequent day, white leather/velvet sofa for v.v.i.p. 2 seater/ 1 seater (1st day), subsequent day, white masking on bottom frame in various size (1st day), subsequent day, wooden platfarm on 6 inch height (1st day), subsequent day, truss pandal with covering fit from 14 ft. to 18 ht.(1st day), subsequent day, truss in width fit from 20 ft. to 40 ft. (1st day), subsequent day, kanati fixed with tent (15x6) (1st day), subsequent day, kanati fixed with out tent (15x6) (1st day), subsequent day, trussgate (1st day), subsequent day, optnan stall size (3mtr.x3mtr.) (1st day), subsequent day, iron frame platfrom with 18mm plywood on top in various sizes. (1st day), subsequent day, printed non woolen carpet. (1st day), subsequent day, teen wall (iron) (1st day), subsequent day, octnum table size 2x2.5 (1st day), subsequent day, tight cloth masking (1st day), subsequent day, iron/steel railing infront of stage (1st day), subsequent day, supremo red valvet chair for vvip (1st day), subsequent day, iron sheet table size 2x6 (1st d

CTN :45318403

05 Jun, 2026 NA

Sonitpur - Assam

Tender For supply of small living shelter lgsf 2457 - superstructure of small living shelter of size 6 point10 m x 5 point 22 m x 4 point75 m height with 1 point 50 m enclosed verandah , ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm , white cement conforming to , curtain arrangement drapery and rod made of 25 mm dia and 1600 mm long , distribution box 8 way spn comma 240 volts copper bus bar , mcb spn 240 volts 32 amps , mcb sp 6 to 32 amps , pvc tape 19mm wide 5m long , cable pvc insulated electric cables copper conductor of size 1 point 5 sqmm single core , cable pvc insulated electric cables copper conductor of size 2 point 5 sqmm single core , cable pvc insulated electric cables copper conductor of size 4 sqmm single core , pvc casing capping 1 inch medium grade snow white , pvc casing capping of size 3 oblique 4 inch medium grade snow white , switch piano 5 amp 230 volts flush type one way snow white , led tuble light fittings 15w 230v box type 4 feets , steel screw full thread with rawl plug plug of size 1 1 oblique 2 inch , pvc switch board 7 inch x 4 inch , pvc switch board 8 inch x 10 inch for main switch oblique db , pvc l bend and t junction joint for pvc casing and caping conforming , switch socket combination multipurpose 2 in 1 comma 15a 230v , switch socket combination snow white 5a 230v , service bracket 40mm dia gi tubing medium grade 1 point 5m long , service cable pvc insulated aluminium conductor comma 10 sqmm 2 core , ceiling rose three terminal snow white , led bulk head fitting with glass cover with led lamp 10 watts , pvc flexible wire copper conductor multi stranded , pvc flexible conduit pipe 15mm dia , pvc round oblique square block , exhaust fan 230 volts 300 mm sweep plastic body alongwith louvers and complete fittings , fire exitingusher of 1 kg capacity , monoblock pump set suitable for 230 v single phase system having capacity 2hp , distribution box 2 way with mcb spn 240 volts 10 amps , pvc flexible suction hose pipe 25mm dia heavy duty , non return valve nrv metal 25mm dia , earthing plate 600x600x6mm galvanised steel , ci earthing pit cover of size 300x300x6mm with angle iron isa 20x20x3mm thick ms frame , funnel fitted with 20mm dia gi pipe 1 point 5m long , gi wire 4mm diameter for earthing , charcoal , salt normal , air terminal single pointed aluminium rod 12mm dia and 300mm long , testing point terminal block make of gun metal and phosphorus bronzesize 75x75x25mm , aluminium strips 25x3mm , galvanised iron strip 32x6mm , earthing plate 600x600x6mm galvanised steel suitable for gi strip fittings , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt , individual standalone plastic body smoke alarm , individual standalone plastic body heat alarm , fire ball extinguisher 1 point 3 kg with suitable provision for wall mounting , double sleeping bunk with matress complete , steel bed side locker of size 1000mm x 1520mm x 450mm complete , study chair of size length 56 cm comma height 82 cm and width 56 cmcomma lacquered finish , study table of size 900mm x 600mm x 760mm wih 18 mm thick prelaminated particle complete , looking mirror of size 18 inch x 4 inch fixed with 4 mm thick ply , water dispenser of 230 v 500 watts without refrigerator capacity of 5 lts oblique hour , protable indoor type high quality kero heater metal body ignites type min 8 hrs and above with capacity 4 ltrs , plastic dustbin of capacity 40 ltrs

CTN :45275091

28 May, 2026 5.38 Lacs

Chandigarh - Chandigarh

Tender For providing & fixing of sanitary items and allied work in model jail sector- 51, u.t. chandigarh (fansi chakki, midday meal, music room) - excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : .2.10, all kinds of soil .2.10.1, pipes, cables etc, not exceeding 80 mm dia. .2.10.1.1, pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia metre .2.10.1.2, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : .4.1, 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.4, 1:5:10 (1 cement : 5 coarse sand (zone-iii) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.10, brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and size in : .6.4, cement mortar 1:6 (1 cement : 6 coarse sand .6.4.2, providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (size 300mm x 600mm) .8.31, providing and fixing aluminium sliding door bolts, isi marked anodised anodic coating not less than grade ac 10 as per is : 1868), transparent. .9.96, 250x16 mm .9.96.2, as per detail attached ., providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete .9.97, 200x10 mm .9.97.2, as per detail attached ., providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : .9.1, 125 mm .9.100.1, as per detail attached ., providing and fixing pressed steel door frames conforming to is: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including m.s. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by engineer-in-charge: .10.14, profile b .10.14.1, fixing with adjustable lugs with split end tail to each jamb .10.14.1.1, providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer-in-charge. .11.56, polished granite stone slab of all colour and texture exceptblack,

CTN :45138683

27 May, 2026 1.26 Crore

Bathinda - Punjab

Tender For bid to ras corrigendum : supply and construction of superstructure of ug coy comd post , supply and construction material , supply and construction electronic , supply and construction of earthing items , supply and construction of lightening conductor , supply and construction of furniture items - cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1969 (make-birla gold/ambuja /ultratech/acc/jk/dalmiya) , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , hard core 63-90 mm , stone boulder 9 to 12" , mild steel bars of size 16 mm and above dia conforming to is 432 (part (1) 1982 (make tata/sail/jsw) , mild steel bars of size 12 mm and above dia conforming to is 432 (part 1) 1982 (make tata/sail/jsw) , mild steel bars of size 10mm dia conforming to 15 432 (part 1) 1982 (make tata/sail/jsw) , mild steel bars of size 8 mm and above dia conforming to is 432 (part 1) 1982 (make tata/sail/jsw) , water proofing compound confirming to is 2645-2003 (make pidilite/dr fixit/fevicol) , gl binding wire (tata/sail/jsw) , wooden plank for shuttering lind class wood of size 3.0x0.30x0.026 , wooden scantling various size , steel props of size 2 mtr long. 80 mm dia, adjustable upto 4 mtr height nad as directed , nails various sizes , (a) ms rhs of size 100x50x45 , (b) ms rhs of size 50x25x2.9 , (c) ms rhs of size 96x48x3.2 , (d) ms flat 40x5 mm thick for wind the tata/sail.jsw , (e) ms plate of size 10mm thick , idi ms plate of size 8mm thick , 10) m5 angle of size 40x40xň for cleat , (f) ms plate of size 12mm thick , ms nuts and bolts of length 100mm fully thread suitable for 10 mm dia mats including two numbers of washers and 25mm of shank and two nos of washers 3 mm thick complete ali as directed , ppgi sheet, 0.55 mm thick of size 10ft x3 ft of make sail/tata/jindal incl treating galvanised surface with mordant solution and two coat of synthetic camoglage paint over one coat of red oxide primer of make berger/asian/nerolac) , ppgi noge sheet of 0.50mm thick of 90cm wide of make sail/tata/jindal incl treating galvanised surface with mordant solution and two coat of synthelic camoglage paint over one coat of red oxide primer of make(berger/asian/nerolac) , self taping steel screw half thread with rawl plag of 1 1/2 size (is! marked) (100 nos/pkt) , door size (2000x1000mm double wal ms sheet for door (2mm thick) frame (chowkat) made of steel equal angle iron 55x55x6mm (151 grade) shutter made up of steel equal angie iron frame 35x35x5mm (151 grade) flat con for stiles (75mm width and 5mm thick) holdfast 450mm long welded either side of anglle iron frame including hinges (06 nos) , tower bolt 150mm long 104 nos: bow handles (04 nos) and sliding bolt 12mm dia 300 mm long with lockung arrangernent complete both side and openable outside complete along the wall. , note the door shall be made of steel suitable painted in olive green colour with two coats of red oxide primer , ventilator with grill of size (1500 x 600mm) ventilator (loop hole) frame for steel angle of size 35x35x5mm (1s1 grade) gral made of tmt bar 12mm dia with weiding the items shall be suitably painted with weather resistance and fire prouf paint over one coat of red uxide primer (make tata/spat/sail , acrylic emulsion paint of approved brand on new concrete surface of make berger/asian/nerolag , painting brush 4"(15) marked) , bila white wall care putty (water resistant white cement based putty) for concrete/mortar walls/ceiling make jk putty birla white , cerment hased paint snowcemi make berger/nemlac/asian) , o bound distemper (washable quality) of proprietary brand of (make , ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick make (johnson kajana orient) tist quality confrorning to 15 150-2006 , white cement confirming to 18 8042/1969 (make acc/birla white ambuja) , curtain arrangement drapery and ind made of 25 mm dia and 1600 mm long pre coated ms pipe with fancy type end

Canopy Structure Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector