Latest cantilever board Tenders | Government cantilever board Tenders

State Government

CTN :45412276

23 Jun, 2026 3.00 Lacs

Baitul - Madhya Pradesh

Tender For purchase for others item - lkexzh dk uke, sign board, led torch, 20 litter water campers, ceiling fan, table fan, wall fan, steel office chair, revolving chair, steel almirah for office, wwhistle with lanyard, mosquito net, cap, gamcha suti, 2t oil & backpack leaf blower, handheled blower, brushcutter, electric street light 30 w, electric street light 50 w, electric street light 60 w, electric street light 100 w

Central Government/Public Sector

CTN :45421571

08 Jun, 2026 NA

Bokaro - Jharkhand

Tender For 3 d acrylic letter led sign board(1items) comprising of following: 1 - 3 d acrylic letter led sign board ,

CTN :45420809

13 Jun, 2026 NA

Jalandhar - Punjab

Tender For supply of cgi sheet size 6 inch x 3 inch , squire pipe 1.5 x 1.5 inch , tiles 2 ft x 2 ft , ceiling lights 15 wt , interlocking tile 60 mm , wash basin with assy , cement bag , paint white pack 20 ltr , marble granite 2 ft x 4 ft , wire 1.5 sqmm , mcb switch 63 amp , led sign board with glow letters 7 ft x 2 ft , roff water proofing chemical pack 20 ltr , sand , bricks

CTN :45419959

11 Jun, 2026 8.61 Lacs

Guwahati - Assam

Tender For maintenance work of internal ei, street light and supply, installation, testing and commissioning of led display sign board, led bollard at rcipmc uubari, guwahati, assamsubwork/packages:sitc of iei and led fittings

CTN :45408699

06 Jun, 2026 1.00 Lacs

Siliguri - West Bengal

Tender For upgradation of e&m work at nirman bhawan office building, matigara, siliguri. (sh: supplying, installation, testing & commissioning of 1 no. led glow sign name board at nirman bhawan office building, matigara, siliguri).subwork/packages:glow sign board

CTN :45408759

09 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For moei, including water supply internal electrical, installation,fire fighting, fire alarm sub stn. , dg sets, lifts, stp and cctv installed gpoa kendriya bhawan fazalganj (sh: supply, installation, testing and commissioning of led glow sign board for sub stnation, hvac plant and fire pumproom at kendriya bhwan kanpur

Central Government/Public Sector

CTN :45365796

27 Jun, 2026 11.50 Lacs

Jammu - Jammu And Kashmir

Tender For repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered wi

Central Government And Public Sector

CTN :45367185

12 Jun, 2026 57.07 Lacs

Delhi - Delhi

Tender For supply of sitc of rooptop 10 story building 3d channel letter led illuminated sign board , design fabrication supply installation testing and commissioning of programmable led digital display , sitc of structural steel work for the above fixed glow sign boards , dismantling of the old existing glow sign board , sub head 2 comprehensive i c preventive breakdown maintenance 1st year of amc , 2nd year of amc after warranty period , 3rd year of amc after warranty period , 4th year of amc after warranty period , 5th year of amc after warranty period

corporations/Associations/Others

CTN :45372721

01 Jun, 2026 NA

Hyderabad - Telangana

Tender For supply of installation of led glow sign board of size (4.5mtrs length x.60mtrs height) weather resistance with 18000 working hours and stainless steel railing size approx. 50kgs including all charges

CTN :45224921

01 Jun, 2026 NA

Muzaffarnagar - Uttar Pradesh

Tender For bid to ras supply of sign board made up of stainless steel frame with 11 x acrylic letters and led size 48 inch x 30 inch , acp board with vinyl both side size 24 ft x 2 ft x 10 inch with 12 x acrylic letters size 18 inch and 08 x stainless steel letters size 16 inch and 02 x acrylic logo size 18 inch , acp board with 08 x digital vinyl letter radium with gloss lamination size 18 inch x 4 inch , logo stainless steel size 36 inch , stainless steel name plate size 2.5 inch x 6.5 inch

Cantilever Board Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

corporations/Associations/Others