Latest canvas pipe Tenders | Government canvas pipe Tenders

Central Government/Public Sector

CTN :45603810

02 Jul, 2026 NA

Mysore - Karnataka

Tender For corrigendum : supply of nylon braided thermoplastic hose pipe 25mm (1 inch) id, working pressure:- 5-8 kg/cm2 with partial transparency and confirming to rcf specification mdts-234 rev-01. [warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45664687

30 Jun, 2026 NA

Valsad - Gujarat

Tender For supply of hydraulic jack with cylinder capacity :50 ton. as per specification: capacity : 50 tons, screwed ram single acting spring return type ,closet height : 310 mm, ram dia : 85 mm to 90 mm ,bore dia : 100 mm ,body dia : 125 mm-130 mm with quick release coupling ,hose pipe 3 meter long operated with single phase ,220 v, 15 amp, high pressure single acting powerpack ,tank capacity : 08 to 10 litre . [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45663687

14 Jul, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of 200 wl capacity compressed bio gas/ natural gas (cbg/cng) cascade composing of 4 gas cylinders to hold compressed biogas at a pressure of 250 bar confirming to is 7285 (part-ii): 2018 (reaffirmed 2022) with frame, pipe connections secured to inlet manifold & valve and as per the specification attached. test certificate issued by petroleum and explosives safety organization (peso) approved manufacturer duly signed by the peso approved competent inspector shall be supplied along with the product. [ warranty period: 12 months after the date of delivery ] ]

State Government

CTN :45656416

07 Jul, 2026 84.07 Lacs

Belgaum - Karnataka

Tender For tender for refurbishment of laboratories in bosch-rexroth centre at vtu mysuru - qrc - male, coupling sleeve, minimess hose, hydraulics oil, smps, pressure relief valve, hose, pressure gauge, emergency off button, protective cover, male stud coupling, straight fitting, elbow swivel connector, stud coupling, male stud coupling for pneumatics, male stud fitting, male stud fitting with nrv, fr unit, compressor, compress oil, electrical limit switch, magnetic reed sensor, three way commector, plastic pipe 4mm, plastic pipe 6mm, pneumatic base, batteries for servo drive, filter bowl, t connection

corporations/Associations/Others

CTN :45653563

30 Jun, 2026 NA

Ahmedabad - Gujarat

Tender For auction sale of new obsolete bell housing cover (gear box cover),new obsolete de bearing bush,new obsolete water pump assembly,new obsolete cool water line,new obsolete water pump purifier kit (major) tata,new obsolete flexible pipe for silencer all type (ms),new obsolete clutch facing (12 inch),new obsolete s/a hose bracket to slave cly. (all type),new obsolete trackrod lev. lh,new obsolete pre filter housing,new obsolete bearing 2505 2620 3103,new obsolete bearing 6403 2rs,new obsolete bearing nu-307,new obsolete bearing t-151,new obsolete cylinder liner all type,new obsolete c-type center bering bracket,new obsolete cam bush set,new obsolete silencer mufflers,new obsolete silencer all type exhaust manifold pipe (big),new obsolete silencer all type bend pipe (small),new obsolete silencer all type bend pipe (medium),new obsolete rpm meter,new obsolete oil pressure gauge meter,new obsolete radiator cap,new obsolete oil seal (small),new obsolete oil seal all type (rubber)

Central Government/Public Sector

CTN :45659327

03 Jul, 2026 NA

Haridwar - Uttarakhand

Tender For tender for supply of flexible stainless steel pipe - flexible stainless steel pipe ss 316 for oil/water , max w/p 30kg/sq. cm. t/p 60 kg/sq.cm , temperature 100 deg. c with flanges at both ends , one loose and other fixed. specification pipe nb 25 mm , l 2000 mm , flange od 115mm , pcd 85mm , thickne ss 20mm , 4 holes , dia 14mm flange material ss-304 , flexible stainless steel pipe ss 316 for oil/water , max w/p 26 kg/sq. cm. t/p 39 kg/sq.cm , temperature 100 deg. c with flanges at both ends , one loose and other fixed. specification pipe nb 50 mm , l 2000 mm , flange od 165mm , pcd 125mm , thickness 20mm , 4 holes , dia 18 mm flange material ss-304 , flexible stainless steel pipe ss 316 for oil/water , max w/p 26 kg/sq. cm. t/p 39 kg/sq.cm , temperature 100 deg. c with flanges at both ends , one loose and other fixed. specification pipe nb 50 mm , l 1000 mm , flange od 165mm , pcd 125mm , thickness 20mm , 4 holes , dia 18 mm flange material ss-304 , s.s corrugated hose with one end swivel flange end and other end swivel female end (as per drawing no. testbed/ss/hose/01) length 3m , nb 12mm , working pressure 120 kg/cm2 , temperature 50 degree centigrate of turbine oil no. 46 for lubrication purpose , corrosion resistant. , s.s corrugated hose with one end fixed male end and other end swivel flange end with 90 degree bend (as per drawing no. testbed/ss/hose/02) length 3m , nb 12mm , working presssure 120 kg/cm2 , temperature 50 degree centigrate of turbine oil no.-46 for lubrication purpose , corrosion resistant , s.s corrugated hose with one end fixed , hex.male end with met.threads(m22x1.5) and other end swivel female end with nut nipple met.threads(m22x1.5) (as per drg. no. tb/ss/hose/03)l 3m , nb 12mm , working press 120kg/cm2 , temp 50 deg.c of turbine oi l no. 46 for lubrication purpose , corrosion resistant , flexible stainless-steel pipe ss 316 for oil/water , w/p 10 kg/sq.cm. , t/p 15 kg/sq.cm , temperature 80 deg. c with flanges at both ends , one loose and other fixed. specification of pipe , nb 100 mm , l 2000 mm , flange od 220mm , pcd 180 mm , thickness 18 mm , 8 holes , dia 18 mm , flange material ss-304

State Government

CTN :45646140

07 Jul, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - supplying , installation, testing and commissioning of vertical turbine pump set with ss impeller capable to discharge 126 m3/hr.against total head of 50 m, (make kirloskar/jyoti/wilo-mather&platt/wpil) coupled with suitable capacity vertical hollow shaft/solid shaft squirrel cage induction motor , rating of motor 20% more bhp than that of pump (make kirloskar /abb /cgl/ siemens) operated on 415 +/- 10% volt, 3 phase , 50 c/s a.c supply , ie3 type as per is:325 and iec:63400-ihaving speed 1450 rpm,with heavy duty m.s. column assembly with ss line shaft and each coloumn of 5 feet length including cost of supplying , fitting and fixing of all required accessories such as cidf sluice valve-1 set, cidf nr valve-1 set, pressure gauge-1 no, strainer-1 no, m.s. channel base plate etc. all complete including cost of taken out existing old pumpset., supplying and installation of fasd starter suitable for above mentioned vt pumpset make lk/bch/schneider., supplying and laying of 25 mm2 , 1.1 kv, 3 core pvc insulated unarmoured copper cable make polycab/kei/gloster, from starter to motor., supplying, installation testing and commissioning of horizontal split casing centrifugal pump set with bronze impeller having discharge 126 m3/hr. against total head of 35 m, (make - kirloskar/jyoti/wilo-mather&platt/wpil), coupled with suitable capacity squirrel cage induction motor, rating of motor 20% more bhp than that of pump(make kirloskar /abb /cgl/ siemens) ,tefc, ie3 type as per is:325 and iec:63400-ihaving speed 1450 rpm,operated on 415 +/- 10% volt, 3 phase , 50 c/s a.c supply, mounted on a commonm.s. base plate including cost of supplying , fitting and fixing of all required accessories such as cidf sluice valve-1 set, cidf nr valve-1 set, pressure gauge-1 no, foot valve-1no, etc. all complete including cost of taken out existing old pumpset., supplying and installation of fasd starter suitable for above mentioned c/f pumpset make lk/bch/schneider., supplying and laying of 16 mm2 , 1.1 kv, 3 core pvc insulated unarmoured copper cable make polycab/kei/gloster, from starter to motor., cost towards complete repairing of control panel at intake well with changing of damaged parts such as :-1.150 amp tpn mccb,50 ka -1 no. as incoming feeder.2. 75 amp tp mccb, 50 ka-2no as outgoing feeder.3.star delta timer-2nos(one for each starter) 4. 32 amp switch fuse unit -01 no. for internal and external light load.5. (0-500 v) volt meter-01 no., ampere meter-01 no.,three phase indicator lamp,powder coating paint,push button on/off,on/off/trip indicator lamp,wiring,etc as per required and testing on full load ., cost towards providing all labour, tools and technicians for taken out and dismantling 40 hp vt p/set with bowl assembly, 6" dia. coloumn pipe and line shaft etc all complete., cost towards dismantling and repairing of complete bowl assembly., cost towards making supplying and fitting s.s. top shaft as per size and sample., cost towards making supplying and fitting of c.i. spider bearing having od 6.5" with rubber bush as per size and sample., cost towards lowering of vt p/set. after complete repairing and assembling works., cost towards complete repairing of control panel at clear water pump house with changing of damaged parts such as :-1.125 amp tpn mccb,50 ka -1 no. as incoming feeder.2. 63 amp tp mccb, 50 ka-2no as outgoing feeder.3.star delta timer-2nos(one for each starter) 4. 32 amp switch fuse unit -01 no. for internal and external light load.5. (0-500 v) volt meter-01 no., ampere meter-01 no.,three phase indicator lamp,powder coating paint,push button on/off,on/off/trip indicator lamp,wiring,etc as per required and testing on full load .

corporations/Associations/Others

CTN :45666447

08 Jul, 2026 NA

Sant Kabirnagar - Uttar Pradesh

Tender For supply of wire braided rubber hose pipe high pressure 1 inch id , neoprene rubber sheet 3 mm thick 300 mm wide , nut bolt washer set m20 coupling type , nut bolt washer set m14 coupling type , hss tool bit bar assorted sizes , synthetic enamel paint white , graphite powder industrial grade , nylon rope industrial grade , safety goggles white lens , safety goggles black lens , nut bolt washer set m8 coupling type , nut bolt washer set urb 360 type , nut bolt washer set m6 coupling type , nylon insert lock nut grade 10 27 mm , neoprene rubber bush m8 coupling type , cooling tower bush bolt , polyurethane coupling element f095e , polyurethane coupling element f0100e , polyurethane coupling element f0110e , neoprene rubber bush m14 coupling type , neoprene rubber bush m20 coupling type , cast iron motor coupling urb 285 , cast iron motor coupling urb 198 * /bid number : gem/2026/b/7701128 + /dated: 23-06-2026 ' ' / bid document 1 / 25

Corporations And Associations And Others

CTN :45651270

29 Jun, 2026 1.99 Lacs

Delhi - Delhi

Tender For supply of t and p items for ward no. 155 (mehrauli) south zone - supply of telescopic pole pruner:-specification:-pole length including blade: 6.5mblade material: hardened & tempered high carbon steel. the head of the blade shall have a hooked tip useful for cutting twigs saw blade shape: hooked type curved sawblade type & no of cutting teeth: tripple grounded 86 teeth blade length: 15"-16" pole type: light weight telescopic tubular aluminum alloy extendable pole no of positions for pole height adjustment: 10 positions locking mechanism: ergonomicvally designed two way locking mechanismtotal working length: max 219"(6623 mm), mln 103" (3103mm) branch cuttingcapacity: 200mm max, petrol operated brush cutterengine: single cylinder, 2 stroke, aircooled onlyengine displacement: 40.2ccpower output: 2kw/2.7hpmax output shaft speed at cuttingattachment: should be minimum 9000 rpmcarburetor: diaphragm with compensator technology.fuel tank capacity: minimum 600 ml.weight(dry, without cutting attachment & deflector): should not be more than 7.5 kg clutch: centrifugal type, clutch shoe support base & lining metal only. multi function handle: should have acceleration, on/off switch at right handle. brushcutter harness: should be double shoulder harness only. anti vibration system: must have 4- point aniti vibration system. vibration level in m/s2 at right handle: should not be more than 2.5 m/s2 sound pressure level db(a): should not be more than 105 db(a) drive shaft design: must have drive shaft ends square design type only.certification: must have valid en certification, petrol operated chain sawengine : single cylinder, 2stroke, aircooled onlydisplacement: 45.4cc poweroutput: 2.3kw. 3.0 hpmax. engine speed (with guide bar & chain): at least 12500 rpmcarburetor: diaphragm type compensator technology.fuel tank capacity: should be minimum 450 ml.dry weight(without cutting attachment):should not be more than 5.0 kgclutch: clutch shoe linining metal only.guide bar design: should be rollomatic type.guide bar length: guide bar length must have 50 cm/20" inch.guide bar and chain: should have same manufacture only.chain type: every drive link require groove & small oil receiver hole for better lubrication. 0.325 inch pitch & 1.6 mm thickness only. chain lubrication system: fully automatic speed controlled rotary oil pumpchain oil tank capacity: should be minimum 200 ml.oil pump drive: should have direct drive from crankshaft & oil pump flow adjustable.master lever control: must have all operation in one hand, chock, throttle, acceleration, switch off.guaranteed sound power level: should not be more than115 db(a). maximum chain velocity to iso 11681: should be minimum 28 m/s. certification: product should have valid dplf certificate with test standard en iso 11681, supply of lawn mower:-specification:- type of machine walk behind lawn mowers power sourcepetrol engine engine displacement 224ccstart type recoil / pull start, speed control variable speeddrive type all wheel drivel blade style rotary typeblade engagement electromagnetic, cut width (mm) 525 to 549, minimum cut height 20 millimetermaximum cut height 80 millimeter, blades hardened steelnumber of blades 1, number of positions for cut height adjustment 6, number of levers for cut heightadjustment: single lever, number of wheels 4front wheel size 203 millimeter, rear wheel size 250 millimeter, wheel tyres pneumaticif yes, grass catcher / collector / bag volume 70 liter, "engine power rating (watt)" 4000 to 4999, engine fuel tank capacity 1.4 ltr., supply pvc pipe 1" dia made up of 1st grade pvcspecification:- braiding with material of braiding: polyesterinner diameter(id) (mm) 25 length of pipe in a coil (in mtr.):30 wall thickness(in mm):3 color: transparent, bamboo broom with wooden handle and iron ring, supply of hessian cloth as per officer in charge

Corporations And Associations And Others

CTN :45651274

29 Jun, 2026 1.99 Lacs

Delhi - Delhi

Tender For procurement t and p items for ward no. 151 (munirka) south zone - supply of telescopic pole pruner:-specification:-pole length including blade: 6.5mblade material: hardened & tempered high carbon steel. the head of the blade shall have a hooked tip useful for cutting twigs saw blade shape: hooked type curved sawblade type & no of cutting teeth: tripple grounded 86 teeth blade length: 15"-16" pole type: light weight telescopic tubular aluminum alloy extendable pole no of positions for pole height adjustment: 10 positions locking mechanism: ergonomicvally designed two way locking mechanismtotal working length: max 219"(6623 mm), mln 103" (3103mm) branch cuttingcapacity: 200mm max, petrol operated brush cutterengine: single cylinder, 2 stroke, aircooled onlyengine displacement: 40.2ccpower output: 2kw/2.7hpmax output shaft speed at cuttingattachment: should be minimum 9000 rpmcarburetor: diaphragm with compensator technology.fuel tank capacity: minimum 600 ml.weight(dry, without cutting attachment & deflector): should not be more than 7.5 kg clutch: centrifugal type, clutch shoe support base & lining metal only. multi function handle: should have acceleration, on/off switch at right handle. brushcutter harness: should be double shoulder harness only. anti vibration system: must have 4- point aniti vibration system. vibration level in m/s2 at right handle: should not be more than 2.5 m/s2 sound pressure level db(a): should not be more than 105 db(a) drive shaft design: must have drive shaft ends square design type only.certification: must have valid en certification, telescopic petrol operatedpole prunerengine: single cylinder, 2 stroke, air cooled onlydisplacement: should be between 25-30 ccpower output: should be minimum 1.2 hpweight (dry without cutting attachment & fuel): should not be more than 7.5 kgfuel tank capacity (ml): should be minimum 400mlchain oil capacity (ml): must have minimum 200 ml.clutch: clutch shoe linining should be metal only.guide bar length: minimum 30cmguide bar and chain: should have same manufacture onlychain type: every drive link need groove & small oil holes for better lubrication. saw chain pitch should be 1/4" or 3/8picco only and drive link thickness must have 1.1 mm or 1,3 mm.max. output shaft speed (rpm): should be minimum 8000 rpm at chain sprocket.equipment total length with guide bar and chain (cm): should be minimum 220 cm - compressed & total length of equipment -minimum 350 cm - extended.sound pressure level (db/a): should not be more than 95 db(a)vibration measurement m/s2 at control handle extended position: should not be more than 5.5 m/s2certification: must have tuv certification with test standard en iso 11680, petrol operated chain sawengine : single cylinder, 2stroke, aircooled onlydisplacement: 45.4cc poweroutput: 2.3kw. 3.0 hpmax. engine speed (with guide bar & chain): at least 12500 rpmcarburetor: diaphragm type compensator technology.fuel tank capacity: should be minimum 450 ml.dry weight(without cutting attachment):should not be more than 5.0 kgclutch: clutch shoe linining metal only.guide bar design: should be rollomatic type.guide bar length: guide bar length must have 50 cm/20" inch.guide bar and chain: should have same manufacture only.chain type: every drive link require groove & small oil receiver hole for better lubrication. 0.325 inch pitch & 1.6 mm thickness only. chain lubrication system: fully automatic speed controlled rotary oil pumpchain oil tank capacity: should be minimum 200 ml.oil pump drive: should have direct drive from crankshaft & oil pump flow adjustable.master lever control: must have all operation in one hand, chock, throttle, acceleration, switch off.guaranteed sound power level: should not be more than115 db(a). maximum chain velocity to iso 11681: should be minimum 28 m/s. certification: product should have valid dplf certificate with test standard en iso 11681, supply pvc pipe 1" dia made up of 1st grade

Canvas Pipe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors