Latest cap comforter Tenders | Government cap comforter Tenders

Central Government/Public Sector

CTN :45372546

21 Jul, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of the thermo plastic hose ( syentic textile reinforced) for water circulation system of conventional coaches, isi marked, nominal bore size 31.5 mm (+1.25- 0.00 mm) as per is-12585/1988 or latest type-2 ( in length of 15 meters) [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Central Government / Public Sector

CTN :45337562

01 Jun, 2026 NA

Tirupati - Andhra Pradesh

Tender For supply of " braided hose pipe with synthetic fibre textile reinforcement and with plain non-fluted surface of 20mm nominal bore in standard lengths of 15mtrs for water tanks of bg coaches to icf specn no.icf/md/spec.112 rev.01,amendment slip no.2". [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45338435

30 Jun, 2026 NA

Ranchi - Jharkhand

Tender For supply of soft blanket of superior quality with 4 cm wide (each side) continuous piping on all boundaries (not less than 4 stitches per cm) of check pattern in dark brown/dark grey or similar dark shed. (a) dimensions: 215 cm x 120 cm (variation+/- 2%), (b) fibre content: 60% wool (minimum), 15% nylon (minimum), balance other suitable fiber (c) weight g/sq.m: 450 gsm (tolerance +/- 5%) (d) breaking load (min) on 15cm x 20cm (strip): (i) warpway: 110 kgf (ii) weftway: 85 kgf, (iii) ends per inch: 25(min.) (iv) picks per inch: 20 (min.), weave: 2/2 twill. the percentage tolerance will be as per governing is:894 /2023 (e) the blankets shall be properly washed and shall be free from grease, soap, filling or any other admixture which would give fictitious mass or firmness. the blankets shall be milled and given a raised finish. for sampling, testing and other details, is: 894 /2023. (f) marking: a printed strip of size: 7 cms x 5 cms should be stitched of bottom left corner of the blanket with following features in the strip: (1) ir (indian railways) in hindi & english. (2) handloom society/mill's name and brand. (3) year & month of the manufacturing (mm/yy). (4) a.c. service. (g) packing and other parameters will be as per is: 894 /2023 (viii) handloom mark issued by ministry of textile should be stitched at one corner. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :44807663

22 Jun, 2026 NA

Katni - Madhya Pradesh

Tender For supply of isi marked rubber hose for oxygen acetylene welding and cutting with braided textile re- inforcement in black or blue conforming to is:447/1988 (reaffirmed-1998) of size: 8mm bore x 15 mtrs length. "this is shelf life items and should be procured with staggered delivery period . supplier to mention/print date of manufacturing on the item & item to be supplied within 60 days of manufacture date." [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45209564

28 May, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of water hose - thermoplastic synthetic textile reinforced, cover - smooth finish,50mm id x 15meters long.is:12585-2023,rev.-1 of feb. 2023,type 2 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45254770

22 Jun, 2026 NA

Halisahar - West Bengal

Tender For supply of hose pipe size 31.5 mm bore in lengths of 15 metres each to llh's drg. no. if/ m-7/k, alt.-1 and is; 444/2025 ( rev. -06), type-2 with unilateral tolerence on bore size+ 1.25 mm. type of material- rubber, with rubber inner lining and rubber outer cover, reinforcement nylon fabric/ textile braided and mandrel made preferred. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45262208

10 Jun, 2026 3.68 Lacs

Sonipat - Haryana

Tender For supply of cap comforter as per mha (capf) qr/specifications (q2)

Central Government/Public Sector

CTN :45270663

11 Jun, 2026 NA

Darjeeling - West Bengal

Tender For supply of cap comforter

Central Government/Public Sector

CTN :45265561

10 Jun, 2026 NA

Erode - Tamil Nadu

Tender For supply of rubber hose for oxy-acetyline welding & cutting with braided textile re-inforcement in blue colour conforming tois:447/1988 (reaffirmed-2003 with amendment 1) of size:8mm bore x 15 mtrs.length. isi marked. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :42424475

04 May, 2026 NA

Kendujhar - Odisha

Tender For bid to ras supply of flexible copper trailing cables d d - item 10 , item 20 , item 30 , item 40 , item 50 , item 60 cable,trg,atc,3.3kv gr,3.5cx50mm2,is9968 size & tvpe 3.5cx50 sq. mm 3.3 kv grade flexible atc conductor of class-s, epr le-3, insulated &black hofr nbr pvc type se-4 sheathed flexible trailing cable suitable for reeling/un-reeling operation. cable type- flexible, standard: is 9968(part 2) 2002 d.c. resistance at 20deg. c (ohms/km) power core max- 0.393 earth core max - 0.795. annealing test in %- (before stranding) 13.5 %. per sulphate test in g/m2- max. 5.00. conductor screeninq power core only material approx thickness mm - extruded semiconducting compound/ extruded semi conducting tape- 0.80. conductor material: annealed tinned copper, 6.6 klv grade, cable type: flexible, standard: is 9968(part 2) 2002 tests on insulation thickness (nom) mm core ldentification - power core-2.20 colour rpct red, yellow & blue for power cores & green for earth core tensile strength before ageing n/mm2- min.4.20 % variation after ageing (air oven)- max. +-30% % variation after ageing in (air-bb)- max. +- 30%. elongation before ageing in % - min.200% % variation after ageing (air oven)- max. +- 30% % variation after ageing in (air-bb)- max. +- 30%. hot set test hot set elongation- 175% permanent set 15%. lnsulation resistance constant (min.) m ohm km. at 27deg.c- min. 3670 at 90 deg.c-min 3.67. thick of lnner sheath min 2.00 mm. rein forcement- open braid of textile material physical test on outer sheath thickness (nom) / min mm- 3.50/ 2.60 colour black, over all diameter of cable mm- 52.00+-3.00. tensile strength ) /bid number : gem/2025/b/6811700 * /dated: 24-10-2025 & & / bid document 1 / 22 before ageing n/mm2 - min. 11.0 at 2oo elongation 4n/ sq. mm. % variation after ageing in (air-bb)-max. +- 50% elongation before ageing in %- min.250% % variation after ageing in (air-bb)- max. + 50%. hot set test hot set elongation- max.175% permanent set- max 15. oil resistance test variation in % in tensile strength- max. +-40% variation in % in elongation-max. +-40%. tear resistance in n/mm - min.5.0. flammability test period of burning after removal of flame- max. 60 sec. min unaffected portion from the lower edge of the top clamp - min 50 mm. test high voltage at room temp- 10 kv ac for 4 hours. water absorption test increase in capacitance 1 to 14 days max- 6% 7 to 14 days max- 2.5%., control trailing cable 12 c x 2.5 3 p x 1.5 (pair screened) 2 voltage grade 1.1 kv 3 reference standard generally confirming to is: 9968 (part- 1)1998 4 conductor a. material to is:8130/84 annealed tinned copper b. nominal area of cross section(sq. mm) i)-unscreened core (sq. mm.) 2.5 ii) - screened pair (sq. mm.) 1.5 c. flexibility class as per is:8130/84 class-5 d. maximum dc resistance of conductor at 20 deg. c i)-unscreened core (ohms/km) 8.21 ii)- screened pair (ohms/km) 13.7 5 insulation i) material epr type ie-2 to is:6380/84 ii) nominal thickness (mm) 1.0 6 two cores of 1.5 sq. mm. size twisted together to form a pair yes. 7 individual pair screening each pair of 1.5 sq. mm. size taped with rpct, screened with 0.2 mm nom dia of annealed tinned copper wires braid, taped with melinex tape. yes. 8 no of cores / pair i)-unscreened cores 12 ii)-screened pairs 3 9 identification of power cores by number printing on cores. 10 laying up (i) three screened pairs laid up together, taped with rubber proofed cotton tape to form group as "a" (ii) 12 unscreened control cores laid up together around group as "a" of screened pairs and taped with rubber proofed cotton tape applied with open spiral. 11 inner sheath a) material to is: 6380/84 hd hofr csp type se-4 b) minimum thickness (mm) 1.6 12 an open braid of nylon cord reinforced in between inner and outer sheath. yes. 13 outer sheath a) material to is: 6380/84 hd hofr csp type se-4 b) nominal thickness (mm) 2.5 14 nom. overall diameter of cable (mm) 33.0 tolerance on nom. overall dia

Cap Comforter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector