Latest cap bolt Tenders | Government cap bolt Tenders

Central Government/Public Sector

CTN :40511800

18 Jun, 2025 NA

Bhavnagar - Gujarat

Tender For stainless steel bolt size-10x40mm, with m10 nut, with m-10x30mm od plane washer-02 nos . with m10 spring washer, grade-304.note:- material test certificate from nabl approved lab to be submitt ed along with supply. ( note: bidder is requested to please attach performance details for 20% qty of tendered item/ qty in form of receipt note / crn / crac, failing which the offer will be summerily bypassed which may please be noted.) [ warranty period: 30 months after the date o f delivery ]

State Government

CTN :40501962

04 Jun, 2025 1.14 Lacs

Srinagar - Jammu And Kashmir

Tender For providing of various items to drivers room and allied works at direction office, circle office and divisional office of m and hed kashmir - providing and fitting of water purifier with purifier purification stages:ro+uv+min+copper purification cartriges : 1. super sediment filter 2. carbon block filter 3. anti-scalant cartridge 4. ro membrane 5. mineral cartridge 6. copper cartridge 7. in tank uv sterilization storage tank capacity: 7 l ro membrane : 75 gpd (gallons per day) production rate : upto 15l/hr max duty cycle : upto 75 litres/day ultra violet led : 0.7 watt input voltage : 140-300 v ac / 50 hz operating voltage : 24 v dc works on tds upto : 2000 ppm, providing and fitting of graphic matting of size 14.5x 12.5, providing and fitting of floor blankets of size 14.5x 12.5, providing and fitting of shoe rack of standard size, providing and fitting of exhaust fan/ventilation fan 150mm sweep 1400 rpm , 270 cmh air delivery, 28 watt, providing, fitting of 20-watt surface led light, providing of cup set of six pieces, providing of ss rice plates, providing of ss water glass, providing of uniform for drivers, dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge: 15.10.2 in cement mortar, providing and fixing brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : cement mortar 1:6 ( 1 cement : 6 coarse sand). (jksor code-6.1.5), providing and fixing of pink marble slab plain 18 mm thick(6007a), providing and fixing 15 mm nominal bore of standard back type c.p. brass sink mixer of approved quality and make, weighing not less than 1.970 kg., providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c waste fittings complete: 18.28.1.2 40 mm dia, providing and fixing of stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm, providing and laying of cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 11.3.2 40mm thick with 20 mm nominal size stone aggregate., direction office/circle office / ao office, vitrified floor tiles providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.1 size of tile 500x500 mm, providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws.(jk sor 9.10.5) second class kail wood 35mm window size i)49"x18"- 04 no., painting wood work with deluxe multi surface paint of required shade. two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture for windows (jksor 13.57.2), renewing glass panes, with wooden fillets wherever necessary :14.7.1 float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) 43"x13"- 02 no., providing and fitting of anodised aluminium tower bolt (barrel type) 100 x10 mm(jk sor 0702), providing and fitting of anodised aluminium handles 100 mm with plate 150x32 mm (jk sor 0704), providing and fixing bright finished steel hooks and eyes for windows, renewing double glazing glass panes argon filled for upvc windows , 20mm overall thickness along with rubber seal, servicing of upvc windows/doors which include servicing/repairs of friction stays, handles etc

Central Government/Public Sector

CTN :40507545

18 Jun, 2025 83.50 Lacs

Jaduguda - Jharkhand

Tender For supply of demolishing cement concrete , dismantling tile work in floors and roofs , dismantling of flushing cistern , dismantling doors, windows and clerestory windows , providing and laying plain cement concrete , providing and laying in position reinforced cement concrete work , providing and laying steel reinforcement for r.c.c. work , providing and fixing centering and shuttering , providing 15 mm thick cement plaster , providing and fixing ist quality ceramic glazed wall tiles , providing and laying vitrified tiles in different sizes , providing and applying two coats of white washing , providing and applying one coat of cement primer , providing and applying wall painting with acrylic emulsion paint , supplying and laying two or more coats painting with synthetic enamel paint , providing and fixing factory made isi marked steel glazed doors ,windows and ventilators , providing and fixing 35mm thick isi marked flush door shutters , providing and fixing isi marked oxidised m.s. handles , providing and fixing oxidised m.s. casement stays , providing and fixing water closet squatting pan , providing and fixing white vitreous china pedestal type water closet , providing and fixing isi marked oxidised m.s. tower bolt , providing and fixing glass panes , white vitreous china wash basin size 630x450 mm with a pair of 15 mm c.p. brass pillar taps. , white vitreous china wash basin size 550x400 mm with a 15 mm cp brass single hole basin mixer , providing and fixing 15 mm nominal bore c.p brass angle valve for basin mixer and geyser points , providing and fixing c.p. brass stop cock , providing and fixing c.p. brass bib cock , providing and fixing 600x450mm bevelled edge mirror of superior glass , providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats , providing and fixing 600x120x5 mm glass shelf with edges round off , providing and fixing c.p. brass toilet paper holder , providing and fixing c.p. brass shower rose with 15 or 20mm inlet , providing and fixing one piece construction white vitreous china squatting plate , providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin , 15 mm dia nominal bore , 20 mm dia nominal bore , 25 mm dia nominal bore , 75mm dia sand cast iron s and s pipe , 100 mm dia sand cast iron s and s pipe , half brick masonry with common burnt clay , providing and fixing 18 mm thick granite of any size,colour and shade , providing and fixing 10 mm thick acid and or alkali resistant tiles , providing and fixing 25mm thick cup board shutter isi marked , providing and fixing 15 mm nominal bore c.p. brass long body bib cock , providing and fixing white vitreous china laboratory sink , structural steel work in single section, fixed with or without connecting plate

Central Government And Public Sector

CTN :40510939

06 Jun, 2025 NA

Dibrugarh - Assam

Tender For supply of hex head bolt m24x150 high tensile. materials and specification as per is:1364 (part -1)- 2 002, ce with property class 10.9 to is: 1367 (part -3)-2002 coating as per mdts-057 make:-tvs/tuff/dfl/ unbrako and all approved vendors for axle end steel high tensile cap screws to be used in end holes of bg freight axles ( item id-3100249, sub item id 3100249002 or 3100249003) borne in the rdso approve d vendor list available on uvam portal. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40500337

03 Jun, 2025 NA

Dibrugarh - Assam

Tender For supply of bolt ms hex head 10 x 50 with nut specn: bis specification no: steel, is-1363,pt-i/2002 for bolt and is:1363(pt-iii)/2002 for nut. property class 4.6 for bolt and 5 for nut. or latest. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40491215

17 Jun, 2025 NA

Hyderabad-T - Telangana

Tender For procurement of tools and plants for stringing in live hot line - 18mm plateena rope with break indicator -500 mtrs , 18mm plateena rope with break indicator -1000 mtrs , hanging rollers - double sheave- for conductor , leight weight single sheave aerial rollers for conductor -acsr moose or zebra or bersimis , two sheeve pulley block 2 nos per set suitable for 20 mm dia poly propylene rope having 5 t capacity , single sheeve pulley -open type- suitable for poly propylene rope-5 tcapacity for 24 mm dia rope , single sheeve pulley -close type- suitable for poly propylene rope5 t capacity for 24 mm dia rope , d-shackles-6.5t capacity , bolted type flat -patta- clamp for 7 by 3.66mm earth wire , 4 sheeve pulley block 5 ton capacity -2 nos- 1set , 12 mm dia steel 300 meter wire rope , articulated swivel joint , equalizer pulley-10 t capacity , light weight automatic type come along clamps for acsr moose conductor , light weight automatic type come along clamps for acsr zebra conductor , light weight automatic type come along clamps for acsr bersimis for 765kv , steel wire rope sling for 12 mm x 1 meter both end spliced , steel wire rope sling for 18 mm x 1 meter both end spliced , steel wire rope sling for 18 mm x 2 meter both end spliced , steel wire rope sling for 18 mm x 2.5 meter both end spliced , steel wire rope sling for 18 mm x 5 meter both end spliced , 12 mm dia-poly propylene rope bundle of 220 meters each , 18 mm dia-poly propylene rope bundle of 220 meters each , 20 mm dia-poly propylene rope bundle of 220 meters each

corporations/Associations/Others

CTN :40004712

10 Jun, 2025 NA

Tirunelveli - Tamil Nadu

Tender For corrigendum : supply of trauma implants - plate set stainless steel , femoral neck fracture fixation system set , trochanter femoral nail with augmentation set , four mm cancellous screws with washer set , six point five mm cancellous screws set , four mm ccs set , six point 5 mm ccs set , drill bit large ss , drill bit large ss , drill bit small ss , special drill bit , k wires ss small , k wires ss medium , k wires ss large , ss wires , titanium elastic nail system - set , dhs or dcs plates and screw set , tibial external fixation set ss , femur external fixation set ss , knee spanning external fixation set ss , ankle spanning external fixation set ss , tibial lrs external fixation set , femur lrs external fixation set , metaphyseal long bone fracure lrs set , distal radius fracture fixtion lrs , tibial illizarov ring fixation set , bayonet k wire for illizarov fixation , olive wire for illizarov fixation , nuts for illizarov fixation , bolts for illizarov fixation , wire fixation bolt slotted for illizarov fixation , wire fixation bolt cannulated for illizarov fixation , threaded rod for illizarov fixation , male post for illizarov fixation , female post for illizarov fixation , rancho cubes for illizarov fixation , extension plate for illizarov fixation , clamps for hybrid fixation for illizarov fixation , spanner for illizarov fixation , hinges male for illizarov fixation , hinges female for illizarov fixation , carbon half ring for illizarov fixation , carbon ring 5 8 for illizarov fixation , washers for illizarov fixation , illizarov telescopic graduated distraction rod , italian arch for illizarov fixation , coventry staples , ordinary staples , antibiotic beaded cement , prp kit , 3 point 5 mm locking screws , 3point 5 mm cortical s screws , 4 point 5 mm locking screws , 4 point 5 mm cortical screws , 2 point 4 or 2 point 7 mm locking screws , 2 point 7 mm cortical screws , universal clamp for external fixator ss , 5mm conical schanz screw ss , 6mm conical schanz screw ss , tube to tube universal clamp ss , tubular rod ss , suprapatellar tibial interlocking nail set , ankle lateral ligament tear reapir or recon set , suture anchors 5mm with needle , suture anchor 6mm with needle , suture anchors 3mm with needle , rotator cuff tear repair suture anchor complex set , knotless suture anchor , biotenodesis screw , acromioclavicular joint fixation set , acl ligament reconstruction set

corporations/Associations/Others

CTN :40478582

16 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For tender for supply of broken screw and nail removal set and universal nail extraction set - hollow reamer , complete , anticlockwise cutting , for screws 3.5 and 4.0 mm , extraction bolt , for screws 3.5 and 4.0 mm , hollow reamer , complete , anticlockwise cutting , for screws 4.5 mm , extraction bolt , for screws 4.5 and 5.0 mm , extraction screw for screws 3.5 mm , extraction screw , conical , for screws 4.5 and 6.5 mm , t-handle with quick coupling , screwdriver shaft , hexagonal , small , 2.5 mm , screwdriver shaft , hexagonal , large , 3.5 mm , hss drill bit 3.5 mm for implant steel , sterile , hss drill bit 2.5 mm for implant steel , sterile , screwdriver shaft , stardrive , t8 , self-holding , forceps for screw removal , l 205mm , gouge , 10mm wide , l 205mm , hollow reamer for 5.0 / 6.0 / 6.5 / 7.0 mm screws , extraction bolt , for 5.0 / 6.0 / 6.5 / 7.0 mm screws , sharp hook , l 155mm , screw driver shaft stardrive t15 , 3.5 , screw driver shaft stardrive t25 , 3.5 , handie with quick coupling , extraction plier for screws , to grasp screws behind the screw head , screw driver hexagonal cannulated 4.5 , screw driver hexagonal cannulated 6.5 , connector with thread , for extraction hook , extraction hook , length 480 mm , for nails dia 9.0 mm , extraction hook , iong , for nails dia 9.0 mm to 11.0 mm , extraction hook , iong , for nails dia 11.0 mm to 14.0 mm , t- handle with quick coupling , box tray for instruments , including all conical / straight bolts , extraction rod , slot hammer etc.

corporations/Associations/Others

CTN :40487913

04 Jun, 2025 NA

Amreli - Gujarat

Tender For annual rate contract of supplying of accessories for goods related of street light at, various area of amreli, district: amreli. (this work only up to rs. 5.00 lac limit) - providing and supplying of accessories for all goods related of street light and elecrtonic including cost of gst and all taxes, insurance, transportation, freight, charge, octroi, inspection charges, loading, unloading, conveyance to deparmental stores, staking the work create out of engineer-in-charge by nagarpalika etc. complete 20w led street light, 24w led street light, 36w led street light, 70w led street light, 200w led street light, 6 amp mcb (single pole), 10 amp mcb (single pole), 16 amp mcb (single pole), 20 amp mcb (single pole), 32 amp mcb (single pole), 32 amp contractor (l.t), 63 amp contractor (l.t), auto timer electric digital clock (glax), 4mm aliminium service wire (90 mtr. bundle), 2 core 0.1 copper flexible wire (90 mtr. bundle), 1/18 (1.5) flexible wire (90 mtr. bundle), 3/20 (2.5) flexible wire (90 mtr. bundle), 4mm copper flexible wire, 10mm copper flexible wire, 4 core 6mm armoured aliminium wire, 4 core 6mm armoured coper wire, 4-way connector supply, led fitting driver 18w to 24watt capacity, led fitting driver 60w to 70watt capacity, 10 aluminium copr lug, 16 aluminium copr lug, 70 aluminium lug, 95 aluminium lug, 120 aluminium lug, steel grip tape, damar tape, 63 amp fuse with lug, 100 to 200 amp fuse with lug, hdpe dando pipe dia. 40mm, 2.5 capacitor, t-5 4 feet, 9w to 15w led lamp, pvc syntex box (peti), mcb channel strip (patti), pakkad (taparia), dismiss (taparia), simple tester (taparia), digital tester (taparia), according to the sample 0!!! to 1.50 mm pipe length from 9 inch to 18 inch bracket with nut bolt bracket as required (cramp for mounting lights on poles), providing & laying approved make double walled corrugated pipes (dwc) of polyethylene (conforming to is 14930 ii )with necessary connecting accessories of same material at required depth in existing trench for laying of cable. below ground /road surface for enclosing cable (a) 50 mm outer dia, (b) 63mm outer dia, (c))90 mm outer dia, (d)120 mm outer dia.

CTN :40469270

14 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For purchase of spares - rock breaker with chisel and moil(ref-xxxiac-1) , head front(ref no-a3-5-3) , turbo charger 1 h1 rh b-6(plate-z1 oblique 1) , cap screw (ms sl-245) , joint for del volute , bulb 12v 10w (feston) , wrench bar 6 , wrench bar 08 , by pass hose(ms-173) , o ring , adaptor , de spanner 16x17(jcb super, plate-v11d) , inner cable(d3-1-5) , bolt(plate xxxi c) , plate friction clutch (ctlg 3dx e5-1-30) , joint (for rocker cover)ms-162) , male cone blacking plug set (smt sl-09) , tooth point (ispl plate-k04) , bush (cat 3dx a2-1-1) , triple lip seal (f5-1-20) , wiper assy front(item no -955) , push rod(r2) , hose top(p4-4-2) , o ring for cyl liner(ms-157) , hose(e3-13-1) , plug water jacket(r2) , hose air induction , seal kit, steer ram(ms-464) , pin pivot(plate-a1-7-2) , hose 1 by 4 inch x 1 by 4 inch bspx1200 long , hose(plate-e1-13-1) , hose(e1-1-2) , tooth (ispl plate-i03) , door handle lh(plate -iv n-9) , joint, liner to head, 0.4mm thk , hose (e1-8-11) , rear frame hose retainer(ispl-938) , hose , fan face level 12v (c1-17-1) , throttle cable assembly (jcb super plate xi a) , hose 08 bsp hp 1910mm a , hose(plate-e1-9-15) , hose (1 by 2 inch bspx1 by 2 inch bspx1130mm long , hose 4 wd rh , gasket cyl head(plate-xxxiii a) , glass tinted left side(plate iv r-4, 379) , hose l h , hose(3dx ctlg e1-9-2) , window tinted glass rh(jcb super,366) , hose(sl-36922, price list) , hose , dowel(r2) , hydraulic hose (ispl plate-f01) , adjuster auto tensioner(plate-xxxviii a1) , nozzle(ms sl-574) , parkbrake caliper g.a (ispl sl-1691) , pin pivet 600mm wind jaw (ref-xxxif) , track rod end gaiter(f1-30-10 by 1a) , hose(plate-e1-9-12) , valve inlet , tool chisel(sl no-2351) , cap filter , universal driveshaft , pressure gauge kit with snap(smt sl-01) , cyl head sub assy , joint knukle swivel(f1-6-10) , grommet , self lubricating brg , leak off hose(ms-152)( plate no- p4-4-2, sl no-9) , nut castle m 20x1.5(f1-30-10) , spring brake shoe(ms-188) , strip 1260 mm long (jcb ms sl no 40) , gasket(ms sl-31) , interrior light (ispl-585) , plate door catch , oil seal 115x140x16 cr make(4r1040t ispl -oil seal , bearing bush ce(ms-189) , rubber hose(plate-l1-4-10) , bolt for con. rod(ms sl-545) , seal (r1 spare) , wiper blade(ms-79) , cap radiator , hose bottom radiator(p4-4-2) , oil ring , fuel filter element pre i 1 (mico no.1457431003) , sealing bush(ms-185) , pin pivot , fuel filter(plate-xxxviig, sl no-2538) , radiator assembly turbo , grommet cable harness( plate no- d1-21-2, sl no-17 , bulb 5 w , 10 amps fuse , de spanner 10x12 mm(plate-vii d -27) , wear pad(ms-27) , ring spanner 18x19mm(ispl sl-563) , screw driver 10 inch by 9 , o ring , female cone blanking plug set (smt sl-08) , friction plate(f5-3-40) , filter fuel secondry(amendment no1,ms-199, jcb 3dx , pipe fuel(plate-t, 44tc) , oil filter (ms sl-386) , ring sealing for bowl(ms sl-563) , gaiter hand brake , hose pipe for breather(ms sl-555) , hose - 4wd(ms-106) , hose(ms-97) , pivet pin alloy steel (ms sl-17) , lh lock assy(ms sl-49) , piston seal assy , working light(ms sl-94) , filter pre cleaner assy , pivot pin( ms sl no-10) , brush set(ms-194) , element , universel joint , piston seal(e4-1-6) , field coil assy(ms-195) , hydraulic hose (ms sl no 1789) , brake pad ga (ispl sl no-1695) , flange spanner for locking pinion mut(smt sl-04) , valve exhaust , silencer exhaust turbo(ms sl no--148,apr-2015) , solenoid switch , excavator valve (ispl plate-e3-6-1) , filter element, hyd oil(ispl plate-f06) , starter motor (item no- 76) (jcb super plate xx , fip 68 kw bs ii(item no-54) , arm loader short(ref no-b3-1-1) , axle arm & wheel hub assy (plate- xixb) , turbocharger 68 kw(ac)t3(plate- xxxix a-2544)

Cap Bolt Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors