Latest cap ends Tenders | Government cap ends Tenders

corporations/Associations/Others

CTN :45612213

25 Jun, 2026 NA

Godda - Jharkhand

Tender For purchase of following materials related to chapakal/solar water tower/urban water supply pipe line repair and street light repair installed-di split collar isi mark ,di jointer isi mark nut (7suta) , bolt(suta) , coupling bolt (4 sutta) , esr nut bolt (5 suta ,4inch long) , chain kuppi isi mark , grinder machine good quality , tool set , water testing lab equipments , alum , bleaching powder , lime , grease oil , hydraulic oil , engine oil , breaker (16 kg) , generator (10kva) , pipe wrench (24 n0) , pipe wrench (18 n0) , pipe wrench (14no) , 18/19 ring wrench , 16/17 ring wrench , 16/17 dial wrench , pipe lifter(1.25inch) , rod die , blade (aary patti) , 30/32 ring wrench , 30/32 dal wrench , 36 n0 ring wrench , 36no. dal wrench , plash , 20 no ring wrench , aary frame , electrode rod , pecking all dia(100mm to 600mm) , hrc fuse-100a , kit kat fuse-100a , 250 watt ballast, copper winded, make-cropmpton, phillips etc. , 400 watt ballast, copper winded, make-cropmpton, phillips etc. , 250 watt mh lamp, make-cropmpton, phillips etc. , 400 watt mh lamp, make-cropmpton, phillips etc. , ignitor, make-crompton, bajaj etc. , 33mfd capcitor , 42 mfd capcitor , gi d-clamp (size: l-13', b-2') set with 3 nut bolt (m6x16) for street light, 2mm thickness, d-clamp to fix in pole and round clamp to fix light with pipe. , gi bend pipe for light fixing, total length-18inch, straight portion-10 inch, dia-1 inch, pipe thichness-1.5mm , gi bend pipe for light fixing, total length-18inch, straight portion-10 inch, dia-1.5 inch, pipe thichness-1.5mm , gi bend pipe for light fixing, total length-18inch, straight portion-10 inch, dia-2 inch, pipe thichness-1.5mm , meggar, make-fluke,waco etc. , multimeter, make-fluke etc. , tester, make-fluke etc. , 3p, 16-32a, power contactor, make-l&t, abb, siemens, , extension board with 5mtr cable , combination plier, make- taparia etc. , nose plier, make- taparia etc. , wire stipper, make- taparia etc. , screw driver set, make- taparia etc. , hammer(bal pin), 500 g, make-taparia etc. , drill machine ,800-1200 watt, make-bosch,dewalt etc. , analog timer for high mast , gi wire for binding purpose(18 gauge ) , ldr(light dependent resistor) sensor for high mast , soldering iron, power-65 watt with complete set , d-spanner set upton-32mm , ring-spanner set upton-32mm , allen key set , pvc tape , bamboo ladder , industrial socket , industrial plug top , old tyep vintage bakelite switch for street light , insulation piercing connector upton-50mmsq. , surface mounted led pcb plate for 35 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 45 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 50 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 70 watt street light,make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 110 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 120 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 190 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 200 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 35 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 45 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 50 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 70 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 110 watt street light,make-crompton, havells, orient, bajaj etc. , driver for 120 watt street light,make-crompton, havells, orient, bajaj etc. , 3-phase motor starter upto-20 kilowatt motor , 1-phase motor starter upto-5hp motor , electric air blower with dust extraction, 800-1000 watt, make-bosch, buildskill etc. , electrical adjustable pole climbing shoe

CTN :45639587

02 Jul, 2026 NA

Almora - Uttarakhand

Tender For supply of insulated tweezer set , line tester , esd safe hand gloves , screw driver long size , welding helmet , portable welding machine , nose plier , winter gloves , welding gloves , soldering iron 80w 24v , solar light , night light

CTN :45280134

25 Jun, 2026 NA

Coimbatore - Tamil Nadu

Tender For corrigendum : supply of 6x7 ring spanner , 6x7 open spanner , 8x9 ring spanner , 8x9 open spanner , 10x11 ring spanner , 10x11 open spanner , 12x13 ring spanner , 12x13 open spanner , 14x15 ring spanner , 14x15 open spanner , 16x17 ring spanner , 16x17 open spanner , 18x19 ring spanner , 18x19 open spanner , 20x22 ring spanner , 20x22 open spanner , 21x23 ring spanner , 21x23 open spanner , 24x26 open spanner , doube hand ring spanner 24x26 for wagon , 24x27 ring spanner , 24x27 open spanner , 25x28 ring spanner , 25x28 open spanner , 30x32 ring spanner , 30x32 open spanner , 32x24 ring spanner , 32x24 open spanner , 34x38 ring spanner , 34x38 open spanner , 36x41 ring spanner , 41x46 ring spanner , 41x46 open spanner , hammering spanner ring 30 , hammering spanner ring 32 , hammering spanner ring 34 , hammering spanner ring 36 , hammering spanner ring 38 , hammering spanner ring 41 , hammering spanner ring 46 , hammering spanner ring 50 , hammering spanner ring 60 , master valve open or close rod 1 mtr length x 30cm top for wagon , bottom rod 40 for wagon , shoe handle brush , 9 inch crate opener , 16oz claw hammer with fiberglass handle , common knife 5 inches 3by4 inch blade 10 inches 3by4 inch oal , 12 inch groove joint plier , 7 inch long nose pliers with cutters , 8 inch combination pliers , deck scraper , 1.5 inch blade x 15 inch long , spray booth scraper , 3 inch blade x 9.25 inch long , std screwdriver 5 by 16 inch tip , 3 inch screwdriver , 12 inch tin snips , 8 inch adjustable wrench , 12 inch adjustable wrench , 14 inch pipe wrench aluminium , 12 inch bung wrench fits 0.75 inch x 2 inch , 26 pcs tool set

CTN :45601780

29 Jun, 2026 NA

Allahabad - Uttar Pradesh

Tender For supply of pneumatic air pipe , high pressure hose pipe , aluminum oxide 400 grit emery paper size width 55mm , leather belt size thickness 3 to 5mm width 55mm , lamp philament 100 w bulb , fan blade , capacitor 2 point 5 mfd , end mill cutter 9mm size 9 into 9 into 25 into 100 , die 22 into 1 point 5 , power hack saw blade 18 inch , power hack saw blade 21 inch , hand hack saw blade 12 inch , jigsaw blade , welding holder , drill twist psje 05mm , gp cut of wheel 14 inch , flap disc 4 inch , metal cutting wheel 4 inch , vcd wheel 4 inch , drill chuck 0 to 13mm , centre drill 5 by 16 inch , hss white tool half x 6 inch , welding screen , welding glass black , welding glass white , regulator oxygen , regulator acetylene , gas welding nozzle 3 4 6 13 20 , gas welding pipe oxygen , gas welding pipe acetylene , creeper trolley , allen key set 09 , stubby construction reversible ratcheting size 10 to 19 , measuring tape 5mm , measuring tape 3mm , silicon gun , nose plier 8 inch , circlip plier bent nose internal 8 inch , circlip plier bent nose external 8 inch , circlip plier straight internal 8 inch , circlip plier straight external 8 inch , pneumatic adapter male and female , goggles for welding black , hammer handle bamboo , sand paper with velcro grit 60 , grinding wheel 200 into 25 into 31 point 75 fine green , nding wheel 200 into 25 into 31 point 75 course black , safety shoes size 07 , safety shoes size 08 , safety shoes size 09 , side cutting tool 16 16 rh , side cutting tool 16 16 lh , drill machine 0 to 13mm , white pencil , metal polishing wheel 4 inch , metal grinding wheel 4 inch , welding hand gloves , safety gloves long , safety gloves short , uv protector goggle transparent glass , uv protector goggle black glass //bid details 2 / 48

State Government

CTN :45387434

23 Jun, 2026 NA

Multi City - Telangana

Tender For corrigendum : tggenco-ytps(5x800mw)-supply of various t and p items required for unit-1 and 2 turbine maintenance divisions of stage-i of ytps. - tool kit, tool kit, complete set of taparia tw250 torque wrench, sq.dr.torq. wrench, taparia make sockets set, taparia make long nose plier, taparia make center punch, hole punch set, adjustment spanners, adjustment spanners, spanner, single open jaw, single end open jaw spanner(ribbed), single end open jaw spanner(ribbed), single end open jaw spanner(ribbed), spanner set,double open end, taparia make heavy duty pipe wrench, taparia make heavy duty pipe wrench, file,round, file,half round, tin cutter with spring, chissels 8 inch, ring spanner, d spanners set, ring slugging spanner, ring spanner, ring slugging spanner, ring spanner, ring spanner, ring spanner, ring spanner, allen head socket, allen head socket, impact socket, impact socket, impact socket, impact socket, impact socket, impact socket, impact socket, impact socket, impact socket, impact socket, impact socket, impact socket, impact socket

CTN :45482035

22 Jun, 2026 19.50 Lacs

Rohtak - Haryana

Tender For corrigendum : supply of various parts of horizontal pumps and tools... - ms flat 50*5 mm, ms angle 50*50*5mm, 50*50*6mm (tata,sail,jindal make), ms channel ismc 100 (tata,sail,jindal make), ss round bar 30 mm(line shaft), ss round bar 40 mm(line shaft), plastic rope 3/4", nut & bolt 5/8"x 3", m.s nut & bolt 5/8" x 21/2", ms nut bolt 5/16x 1.5", ms nut bolt 1/2" x 2", ms nut bolt 1/2" x 11/2", ms nut & bolt 1/2" x 21/2", ms nut & bolt 1/2" x 3", ss nut bolt 3/4x3, stud with nut 11/16 x 5/8 x 3", stud with nut 5/8x 5/8 x 3", gi wire 8 swg, gland packing 3/8", gland packing 1/2", lift belt 5ton cap x 4 mtr, lift belt 3ton cap x 3 mtr, lift belt 3ton cap x 2 mtr, gland plate for n.w-12d, gm gland plate for 5 c/s v.t pump as per sample, g.m gland plate for 10 c/s v.t pump as per sample, pipe wrench 12"(300mm size) (taparia/pye/miranda/spartan/stanley make ), hammer 1lbs, screw driver 10" 250mm (taparia/pye/miranda/spartan/stanley make ), screw driver 12" (taparia/pye/miranda/spartan/stanley make ), screw driver 8" (taparia/pye/miranda/spartan/stanley make ), ring spanner 24x26mm (taparia/pye/miranda/spartan/stanley make ), insulated plier 8" (200mm) (taparia/pye/miranda/spartan/stanley make ), long nose plier 8" (taparia/pye/miranda/spartan/stanley make ), d-e spanner 21x23 (taparia/pye/miranda/spartan/stanley make ), d-e spanner 24x26mm (taparia/pye/miranda/spartan/stanley make ), d-e spanner 14x15mm (taparia/pye/miranda/spartan/stanley make ), d-e spanner 12x13mm (taparia/pye/miranda/spartan/stanley make ), ring spanner 14x15 (taparia/pye/miranda/spartan/stanley make ), ring spanner 21x23 (taparia/pye/miranda/spartan/stanley make ), ring spanner-12x13 (taparia/pye/miranda/spartan/stanley make ), line tester (7"- 8") (taparia/pye/miranda/spartan/stanley make ), freemans 5mx19mm measuring tape with belt clip and lock, hexa blade one side/double side mix, welding holder heavy duty, hdpe tirplaine 15 x12 heavy duty, coupling tyre tc 13, delivery casing for nw-12d inner for kirlosker pump, delivery casing for nw-12d outer for kirlosker pump, impeller 6x6 nw-12d kirloskar pump, bearing pedestal for nw-12d kirlosker make, shaft for nw-12 d pump kirlosker make, lantern ring for nw-12 d pump kirlosker make, water deflector for nw-12 d pump kirlosker make, abrasive cutting wheel 14 (grindwell norton, 3m, bosch make), motor shaft with check nut 5 c/s v.t pump as per sample, impeller nut mf for 5 cs horizontal pump as per sample, fuel pump gear tv-2 kirlosker make, servo super oil mg 20w-40, log book of vehicle (25 page) as per sample, mas register (50 page) as per sample, log book of machinery (25 page) as per sample, cyl liner with joint ring 1800801 kirlosker make, valve kit tv-2 kirlosker make, liner piston chota jawan kirlosker make, head gasket 87.5 mm 1180090300 kirlosker make, air cleaner kirlosker make, packing kit tv-2 kirlosker make, pipe t type kirlosker make, fuel tank complete kirlosker make, fuel filter assy kirlosker make, nozzale chota jawan kirlosker make, air cleaner chota jawan kirlosker make, packing kit chota jawan kirlosker make, valve kit chota jawan kirlosker make, head gasket chota jawan kirlosker make, diesel filter chota jawan kirlosker make, banjo bolt tv2 kirlosker make, nozzle 9430034216 kirlosker make, piston assy.180061000-1800615000 kirlosker make, cr bolt tv2 kirlosker make

CTN :45547328

11 Jul, 2026 NA

Malda - West Bengal

Tender For supply of telecom optical fiber tool kit comprising the minimum following equipment. (i) fiber cleaver 18000 cuts type. (ii). tweezer, (iii) cable sheath jacket striper, (iv) buffer tube/drop cable stripper, (v) utility knife (vi)screw driver with bits, (vii) alcohol dispenser (viii) cleaning wipes (set of minimum 100 nos.) (ix) visual fault locator 1 mw (x) plier needle nose (xi) long nose plier (xii)allen key set 4 to 10 mm. (xiii)drop cable striper (xiv)cable cutter up to 25 mm (xv) fiber protection sleeves set of 100 (xvi) fiber power meter with adopter (xvii)multi - purpose saw (xviii) number sticker (xix) spanner set. (xx) adjustable wrench (xxi) curved claw hammer (xxii) head light (xxiii) brush (xxiv) polishing disk (xxv) 1 no. carry bag [ warranty period: 30 months after the date of delivery ] ]

CTN :45576617

02 Jul, 2026 8.00 Lacs

Bagpat - Uttar Pradesh

Tender For tender for supply of blue paste tube , 15 ml camel make , holdtite , 500gram , grinding wheel ag-4 bosch make , buffing wheel ag-4 bosch make , cutting wheel ag-4 bosch make , angle grinder ag-4 bosch or dewalt make , pather tod tungsten carbide tip , carbon brush for ag-4 grinder , carbon brush for ag-7 grinder , pipe wrench 18 inch , taparia make , pipe wrench 24 inch , taparia make , sly wrench 24 inch , taparia make , hammering spanner size 36 mm , taparia make , chain block capacity 5ton indef make , welding holder , current 600amp , esab make , welding copper lead 35 sqmm , cutting torch , welding safety hand gloves , welding white glass , welding black glass , safety goggles (transparent) , oxygen regulator , lpg regulator , gas cutting nozzle 1/8 inch , gas cutting nozzle 1/16 inch , gas cutting nozzle 1/32 inch , white lead , red lead , emerey paper rough , emerey paper fine , emerey tape fine , graphite powder , hand wire brush 6 inch size , grinding wheel 5 inch bosch make , grinding wheel 7 inch bosch make , cutting wheel 7 inch bosch make , m-seal compound , teflon tape , oxygen rubber hose pipe , red , lpg rubber hose pipe , blue , woolen felt size 1500x4000x16mm (namda) , painting brush 4inch , hose pilpe clamp 1.25inch , rubber star l-75 , lovejoy make , rubber star l-90 , lovejoy make , rubber star l-95 , lovejoy make , rubber star l-100 , lovejoy make , wire braided rubber hose pipe 1inch , pressure- 800psi , temp.-80 to 120 degree c heavy duty , flexible wire braided hose pipe 3/4 inch , (tansperant) pressure- 5kg per sqcm , heavy duty , ms bolt 12x45 mm , full thraed , nylock nut m-12 , split pin m-6x50 mm , split pin m-6x65 mm , metalon pad as per drawing or semple , ms bolt 20x120 mm , halfthraed , nylock nut m-20 , oil seal mykoda/skf no-20-30-10 , oil seal mykoda/skf no-24-42-8 , oil seal mykoda/skf no-30-47-7 , oil seal mykoda/skf no-45-70-8 , oil seal mykoda/skf no-50-70-10 , oil seal mykoda/skf no-50-80-8 , oil seal mykoda/skf no-55-80-8/10 , oil seal mykoda/skf no-60-85-10 , oil seal mykoda/skf no-68-100-10 , oil seal mykoda/skf no-78-100-10 , oil seal mykoda/skf no-65-90-10 , oil seal mykoda/skf no-70-90-10 , oil seal mykoda/skf no-80-100-10 , oil seal mykoda/skf no-75-95-10 , oil seal mykoda/skf no-100-120-13 , oil seal mykoda/skf no-85-100-10 , oil seal mykoda/skf no-85-110-12 , oil seal mykoda/skf no-20-30-10 , oil seal mykoda/skf no-95-120-13 , oil seal mykoda/skf no-100-120-10 , oil seal mykoda/skf no-110-130-13 , oil seal mykoda/skf no-130-160-12/15 , oil seal mykoda/skf no--300-330-15 , hydraulic rubber hose pipe both side flange type -en853/sae100/r1 at , size-3/4inch , length-3 mtr. , max. w.p.-105 bar , 1520 psi make mithra fluidtrans , hydraulic rubber hose pipe both side flange type-1 sn dn16 din 20022 , en853 , sae100 , r1 at , size-5/8inch , length-3 mtr. , max. w.p.-130 bar/1900 psi make polyhose , hydraulic rubber hose pipe both side flange type -sae100 r4-16 , i.d.-1inch , length-1.5 mtr. , max. w.p.-17.2 bar/250 psi make parker markwel , hydraulic rubber hose pipe both side flange type -sae100 r4-32 , i.d.-2inch , length-1.5 mtr. , max. w.p.-10 bar/145 psi make parker markwe , hydraulic rubber hose both side flange type -5 sae100 r4-20 , i.d.-1 1/4inch , length-2.6 mtr. , max. w.p.-13.8 bar/200 psi make parker markwel , hydraulic rubber hose both side flange type -6 sae100 r4-32 , i.d.-2inch , length-2.6 mtr. , max , w.p.-10 bar/145 psi make parker markwel , socket set 1/4 inch drive , 46 pcs set (taparia sa46) , plier 8inch (taparia 1621-8) , pipe wrinch 8inch , pipe wrinch 12inch , slide wrinch 6inch , slide wrinch 10inch , slide wrinch 12inch , ring spanner set mm (6 , 7 to 30 , 32) , d-spanner set mm (6 , 7 to 30 , 32) , wire stripper set , allen key set inch , allen key set mm , nose circlip piler inner , nose circlip piler outer , hexa fram with blade model-hfsa12 size 12inch , screw driver kit (model 802) , long handle screw driver size (300mmx8mm) , cable tie 4inch , cable

State Government

CTN :44231929

30 Jun, 2026 NA

Jamnagar - Gujarat

Tender For corrigendum : supply of various consumable material at emd -1 lighting dept. stps. - flat cable 3 corex4 sqmm with copper conductor for submersible motor, flexible copper wire 1 corex2.5 sqmm (36/0.3 mm)1100v(1 coil is equal to 90 meter), flexible copper wire 1 corex1.5 sqmm (22 / 0.03) voltage grade up tp 1100 volt conf to is- 694, copper cable 2 cx1.5 sqmm, pvc twin wire 2.5mm sqr., self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of red colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of yellow colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of blue colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of black colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of green colour, porcelin kit kat fuse 16 amp, porcelain kit kat fuse 63 amp, 415 v , ac, porcelain kit kat fuse 100 amp, 415 v , ac, porcelain kit kat fuse 200 amp, 415 v , ac, din rail mounting channels, ring spanner set model 1812 taparia make, double ended spanner set dep 12, adjustable screw spanner size 8" (200 mm) p.no.1171-8 p, screw driver (tester) taparia product no: 818.special with neon bulb, generally confirming to is 5579-1985 grade - ii, yellow handle,, taparia combination plier, product no.1621-8,210 mm, digital insulation tester, range-0-2000 m-ohm, selectable test voltage-250/500/1000 v dc with rechargeable battery, digital clamp on meter lcd display with backlight, 3-3/4 digit., alluminium ladder self supported a type having 05 feet length, long nose plier insulated with thick c.a. sleeve,165 mm length, taparia make tool, allen key set, product no aki 10, allen key set mm size (09 piece) 1.5,2,2.5,3,4,5,6,8,10 mm, hand drill machine size 13mm, hand grinder machine., aluminium tube terminals10.0 mm2, m.6, aluminium tube terminals16.0 mm2, m6, aluminium tube terminal 35 sqmm,m 8, aluminium tube terminals50.0 mm2, m10, aluminium tube terminals70.0 mm2, m8, aluminium tube terminals95 .0 mm2, m10, pin terminal 1.5 mm2, pin terminal 2.5 mm2, aluminium in line connector25.0 mm2,, 35mm alluminium in line connector als-2"dowell", aluminium in line connector 70 mm2, 95 sqmm crimping alluminium type in-line connectors cat no: hai-15 hex make, crimping tools capacity: 10 mm2 to 185 mm2., crimping tools, capacity: 6 mm2 to 50 mm2., alluminum ring type lug 25 sq. mm, pvc saddle 10 mm, pvc saddle 15 mm, pvc saddle 20 mm, pvc saddle 32 mm, multistrend copper flexible wire 1 core x 4.0 mm2, (7 strendes) pvc (double) insulated, without armourr, 1.1kv grade (100m/coil)

CTN :45543826

23 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of digital distometer make skadioo or bosch , speedo or odo meter for measuring of road distance , road depth gauge 6 inch 150mm dia , long probe heavy multipurpose temperature thermometer for road work make labart , electric bench griding wheel green silicon 150mm 80 grit , mortise chisel half inch make anant , smooth plane 04 inch make anant , smooth plane 10 inch make anant , cross pein hammer 300gm make taparia , firmer chisel 25mm make anant , chisel for carpenter 25mm make anant , glass cutter , screw driver both side make taparia , wiremesh cutter make taparia , center wall punch make taparia , mini hack saw frame with blade , cross pein hammer 100gm , carborunum stone 8 inch make universal , measuring tape 3mtr make hi speed , pincer 8 inch , hammer 300gm , hammer 400gm , box wrench heavy duty 14 inch make taparia , teflon tape , screw driver 12 inch plus make taparia , screw driver 12 inch minus make taparia , monkey wrench make taparia , adjustable wrench make taparia , nose plier make stanley or taparia , plier make stanley , pipe extractor , pipe wrench 10 inch make taparia , aluminium drill bit set 4mm to 10mm , hammer drill bit set 4mm to 5mm , spanner set 4mm to 20mm make taparia , nail punch make bosch * /bid number : gem/2026/b/7661755 + /dated: 13-06-2026 ' ' / bid document 1 / 30

Cap Ends Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

State Government