Latest cap screw Tenders | Government cap screw Tenders

Central Government/Public Sector

CTN :43057801

11 Dec, 2025 NA

Ratlam - Madhya Pradesh

Tender For supply of pinnacle total hip replacement set [pinnacle total hip replacement set 16 containing a) pinnacle sector acetabular cup 50mm, b) pinnacle ceramax 36 head + 1.5, c) pinnacle marathon + 4 neut 50odx32id, d) corail stem -k8s hac, e) cancellous screw 6.5x25mm.]

Central Government/Public Sector

CTN :43047268

15 Dec, 2025 2.01 Lacs

South Andaman - Andaman And Nicobar Islands

Tender For supply of socket bolts part no 3000001067 , socket head cap screw part no 3000000349 , cotter pin part no 5500000930 , washer part no 3500000486 , hexagon screw part no 3000000006 , anode part no 1200000027 , g 1 inch plug with bonded seal part no 3000000197

Central Government/Public Sector

CTN :42902933

06 Dec, 2025 NA

Varanasi - Uttar Pradesh

Tender For corrigendum : tender for supply of small machined items with or without close tolerances--plate (hw-250.71) -- fully m/cd item as per drg. 41201009001 rev.00 with matl. aa10119 rev.15 , ring (hw-250.72) -- fully m/cd item as per drg. 41201009002 rev.00 with matl. aa10119 rev.15 , threaded bolt (hw-062.20)- fully m/cd item as per drg. 41203709201 rev.00 with matl. aa10218 rev.07 , hexagonal cap screw l 160 var.04 -fully m/cd item as per drg. 41201009205 rev.02 with matl. aa10218 rev.07 , hex bolt m42 (hw-396.51) -- fully m/cd item as per drg. 41201009203 rev.00 with matl. aa10218 rev.07 , support plate (hw-396.52) -- fully m/cd item as per drg. 41201009204 rev.00 with matl. aa10218 rev.07

CTN :43035162

13 Dec, 2025 NA

Parganas - West Bengal

Tender For supply of purchase of spares : :-- cap screw 0.75x1.75(ispl plate-d05), nut m10x1.5(plate-h01&04)mk-i, cap screw(ispl plate d01), washer (plate d01), shank (ispl plate-k04), snap ring, back up tool, thrurst ring, assembly jig, dial indicator, adj pilot for valve cutters(smt-31), control rod stop, belt wrench, cutter for 30o(smt-33), cutter for exhaust valve seat(smt-32), grab sleeve, straightedge, measuring cover, insert, wheel stud puller, screw joint coupling 9 by 26 inch(smt-28), driver, handle set for water pump(smt-30), hexagon nut, coupling (sheet 3), plate (plate d01), gearbox housing, gearshift syst (4wg-92s4 john de, grab sleeve, grab sleeve, grab sleev, grab sleeve, internal puller, magnetic stand, ejection tool, gauge ring(smt-29), yoke, gauge block 200mm(smt sl-23), straightedge(smt sl-22), rear axle ( fig d 01), clamping yoke(smt-25), high pressure pump super(smt sl-10)

CTN :43020662

31 Dec, 2025 NA

Delhi - Delhi

Tender For tender for rate contract of orthopedic spine implants - spine implants, pedicle screw set for spine consisting of 4 screws with ini and 2 connecting rods; top loading, polyaxial screws 4.5mm/5.5mm/6.5mm, length- all sizes, with one trans rod connector(all sizes). titanium., pedicle screw set for spine consisting of 4 screws with ini and 2 connecting rods; top loading, monoaxial screws 4.5m25m/5.5mm/6.5mm, length- all sizes with one trans rod connector(all sizes). titanium., pedicle screw set for spine consisting of 8 screws with ini and 2 connecting rods; top loading, polyaxial screws 4.5mm/5.5mm/6.5mm, length- all sizes. titanium., pedicle screw set for spine consisting of 8 screws with ini and 2 connecting rods; top loading, monoaxial screws 4.5mm/ 5.5mm/ 6.5mm, length- all sizes. titanium, cervical spine locking plate set, titanium. plate length 36mm to 90mm (adequate for one to four level vertebral fixation), 4 screws 4.0 mm( length 14mm/16mm)., top loading implant system for posterior stabilization of cervical spine and upper thoracic spine -the system should have locking screws for angularly stable locking and fixation of the rod. the system must have self- tapping screws. the system must have 3.5 mm ti rod. the system should have oc fusion option. the system should offer hooks. cancellous profile bone screws: 3.5 mm: 8 mm 50 mm (2 mm increments ) 4.0 mm: 8 mm 50 mm (2 mm increments). cortical profile bone screws: 3.5 mm: 28 mm 50 mm (2mm increments). screw head profile: height = 11 mm, diameter=9 mm. rod run = 9 mm. shaft screws (cortical profile):3.5mm: 22 mm 36 mm (2mm increments). shaft screws (cortical profile):3.6mm: 22 mm 36 mm (2mm increments). shaft screws should have 10 mm unthreaded portion rods must be of the following specifications: 3.5 mm ti rod: 80 mm, 120 mm and 240 mm lengths. 3.5 mm/5.0 mm ti rod, 120 mm/170 mm. 3.5 mm/6.0 mm ti rod, 120 mm/170 mm. trans-connector: 60 mm and 75 mm. short and long/left and right hooks. 3.5 mm ti transverse bar. the system should have occipital plate/rods options. should be quoted as a set of 4/6/8 screws with inner nuts and 2 rods. should provide undertaking to provide the instrumentation one day prior to surgery. price of transverse connectors and occipital plate with screws to be quoted separately., titanium mesh cage, fenestrated and hollow from inside to accept bone graft- all sizes (10-16mm dia, 80mm length)., titanium tlif banana cage - all sizes (6/8/10/12mm height, small/medium/large foot print), titanium expandable cage for cervical/ thoracic/ lumbar spine. misc sizes *, device for intervertebral assisted motion 8mm, 10mm, 12mm, 14mm *, titanium anterior staples 13 mm, 15mm, 17 mm, plif cage peek 7-14 mm, foot print 22-28 mm. 1 set consists of 2 pcs *, tlif cage peek 7-14 mm, foot print small/ medium/ large. 1 set consists of 1 pc *, laminoplasty spacer peek with 2 screws misc sizes *, kyphoplasty kit *, vertebroplasty kit *, absorbable haemostat (oxidized regenerated cellulose), sterile 1.25 x 5cm, hemostatic matrix plus flex tip (flowable haemostat)*, non- suture self adhesive artificial dural membrane (small / medium size), round tip diamond burr with long handle (2mm diameter) stryker, round tip diamond burr with long handle (3mm diameter) stryker, round tip carbide burr with long handle (3mm diameter) stryker, hydroxyapatite trapezoidal spacer (2cm x 1cm x 0.5cm) for cervical laminoplasty, titanium lateral mass/ pediclescrews set (4 screws 3.5mm and 2 rods and transverse connector) *, titanium cannulated lag screw for odontoid all sizes *

CTN :43020665

31 Dec, 2025 NA

Delhi - Delhi

Tender For tender for rate contract of orthopedic arthroplasty implants - arthroplasty implants, basic high flex total knee replacement system: total condylar posterior stabilized (ps)/ cruciate retaining (cr) design anatomic femoral component of various sizes and having design to accommodate high flexion, can accept different sizes and thickness of fixed bearing inserts. fixed bearing cemented tibial tray in various sizes, can accept different sizes of fixed bearing inserts of various sizes & thickness. fixed bearing ps/cr polyethylene insert in different sizes & thickness compatible with various sizes of fixed bearing tibial tray. high viscosity antibiotic loaded bone cement 40 gm. with one pulse lavage system. disposable items consist of the items mentioned below: pulsatile lavage. iodinated surgical adhesive drape ( largesize ) skin stapler. cling tape. gowns (6 nos) stockinet. leg o drape, water impermeable along with screen. surgical oscillating saw blade.orthopaedic gloves with roughened palmer surface., high flex total knee replacement system with attachment of one tibal wedge and one tibial intramedullary extension rod assembly * total knee replacement system, posterior stabilized (ps), design femoral component of various sizes and having design to accommodate high flexion, can accept different sizes and thickness of fixed bearing inserts. fixed bearing cemented tibial tray in various sizes with attachment of one tibial wedge and one tibial intramedullary extension rod assembly, can accept different sizes and thickness of fixed bearing inserts. fixed bearing ps/cr polyethylene insert in different sizes & thickness compatible with various sizes of fixed bearing tibial tray. patella with pegs made of polyethylene available in various sizes. high viscosity antibiotic loaded bone cement 40 gm. disposable items consist of the items mentioned below: pulsatile lavage. iodinated surgical adhesive drape (large size) skin stapler., modular bipolar hemiarthroplasty system. modular bipolar shell containing hdpe inbuilt of different sizes (39-53mm outer diameter and 22/28 mm inner diameter in three different neck lengths). cemented tapered femoral stem (different sizes: extra small, small, medium, and large). cement restrictor centralizer 1 packet of bone cement 40 g. disposable items consist of the items mentioned below: iodinated surgical adhesive drape ( largesize ) skin stapler. cling tape. gowns (6 nos ) stockinet. leg u drape, water impermeable along with screen. ethibond5 : 1 pack with 4 threads.orthopaedic gloves with roughened surface 6 pairs., non-cemented total hip system (metal head on poly) non-cemented ha/porous coated stem having various sizes, can accept multiple offsets of metal heads (small/medium/large/extra-large) with diameter of 28/32/34/36. non cemented porous coated acetabular cup made of titanium alloy available in various sizes, with locking mechanism to accept polyethylene liner of various sizes & diameter (28/32/34/36) must have holes in dome area for screw fixation. the polyethylene liner should be highly cross-linked with various diameters & sizes compatible with acetabular cup & can accept various heads. 3 cancellous screws made of titanium to fix the cup into the acetabulum. disposable items consist of the items mentioned below: iodinated surgical adhesive drape ( largesize ) skin stapler. cling tape. gowns (6 nos ) stockinet. leg u drape, water impermeable along with screen. ethibond 5: 1 pack with 4 threads.orthopaedic gloves with roughened surface 6 pairs., non cemented total hip system (ceramic head on poly ) * non cemented ha/porous coated stem having various sizes, can accept multiple offsets of metal heads (small/medium/large/extra large) with diameter of 28/32/36. ceramic heads (made of delta ceramic) having variable offset (small/medium/large/extra large) with diameter of 28/32/36 mm compatible with the stem. non cemented porous coated acetabular cup made of titanium alloy avai

CTN :43038469

15 Dec, 2025 NA

Bareli - Madhya Pradesh

Tender For supply of 1. hex. socket head cap screw m10 x 70 (pl 73853173)

CTN :43039884

11 Dec, 2025 NA

Kharagpur - West Bengal

Tender For supply of axle end steel high tensile cap screws

CTN :42719860

10 Dec, 2025 NA

Medak - Telangana

Tender For corrigendum : supply of socket set screw with knurled cup point (grub screws) as peri. s 6094 thread conforming to iso metric , lps brand cold forged hightensile socket head cap screws confirming to is: 2269-1981 thread to class , hexagon socket head cap screws m24 x 60 is no: 2269 , hardened cylindrical pins (dowel pins) as per i. s 4432 gr: c-14 and i. s 2393-1972 with m6 tolarence

Central Government/Public Sector

CTN :43012998

08 Jan, 2026 NA

Koraput - Odisha

Tender For tender for supply of manufacturing and supply of parts from hal supplied raw material drawings and technology d d - clamp , protective washer , pin , nipple , end cap , screw , rivet , rivet , rivet

Cap Screw Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector