Latest capacitor panel board Tenders | Government capacitor panel board Tenders

State Government

CTN :45417968

08 Jun, 2026 5.30 Lacs

Hanumangarh - Rajasthan

Tender For repair of electrical starter and cubical panel board of various rural water supply scheme under sub division tibbi

State Government

CTN :45417969

08 Jun, 2026 2.50 Lacs

Hanumangarh - Rajasthan

Tender For repair of electrical starter and cubical panel board of urban water supply scheme under sub division tibbi

State Government

CTN :45375477

06 Jun, 2026 5.29 Lacs

Idukki - Kerala

Tender For state plan- works under nedumkandam section-state plan 2024-25 - energy efficiency improvement, optimization of electromechanical items, safety audit and ensuring safety in operation of wtps and pump houses- rwss to udumbanchola - supply, e - cost of materials & working charges, od70149/2024-2025:1. pump & motor -supply, erection, testing and commissioning of kwa pre-qualified reputed make centrifugal pump set with bronze/ss impeller, ss shaft and ci pump casing etc. complete. the duty condition is as follows, discharge - 6 lps & total head - 92m, the motor is tefc squirrel cage induction motor suitable for the above pump working with 3 phase, 50 hz, 415 v shall confirm to eefi/is 325 etc. complete including providing suitable concrete foundation including cost of cement., sand and metal etc. flexible coupling shall be used for coupling of pumps and motors. 2. starter - supply, erection, testing and commissioning of suitable rating fullu automatic star delta starter with air break contact starter suitable for the above motor with over voltage and under voltage protection, single phase preventer, over load relay with motor protection relay with main contactor and bypass contactor as per ie rules and code of practice etc. complete. 3. panel board (suitable) for operating pump sets (but one pump set at a time) - supply, erection, testing and commissioning of cubical type floor mounted ms fabricated dust and vermin proof common control panel board consisting of 1 no. suitable capacity mccb as incomer and 2 nos of suitable capacity mccb as out going (the two mccbs are interlocking with each other) providing suitable size aluminium bus bar inter connect the above mccbs and fitted with 3 nos of indicator lamps, 1 no. volt meter with selector switch, 1 no. ammeter with selector switch etc. complete and provided with a common earth bus for the entire panel and inter connect with the mccbs as per ie rules and code of practice. the panel shall be fitted on a common base frame on suitable foundation. 4. cabling work - supply, laying, testing and commissioning of suitable size cables for the above pump set from panel board to starter and from starter to motor , considering energy conservation. 5 .earthing - supply of all materials and providing suitable earthing by using suitable size pipe/plate earthing gi/copper strip buried in ground and giving double earthing to motor, starter, panel board etc. as per ie standards. 6. capacitor - supply, erection, testing and commissioning of heavy duty app capacitor for the motor to get a power factor above 0.95. the capacitor shall confirm to is 2834 . 7. valves - supply of suitable size best quality heavy duty isi marked ci double flanged sluice valve and non return valve with suitable pressure rating 8. suction and delivery pipe connections - the size of the suction pipe is suitable as per the site condition with a max length of 7.5m. suitable size foot valve connecting at the suction pipe bottom etc. complete and connecting the delivery side of the pump with the valves and suitable specials to connect with the pumping main.warranty 2 year (1 year warranty+ 1 year additional warranty), od109714/2024-2025:dismantling the existing old damged pump by disconnecting the cables, 15.2.1:demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in-charge.nominal concrete 1:3:6 or richer mix (i/c equivalent design mix), 4.3.1:centering and shuttering including strutting, propping etc. and removal of form work for:foundations, footings, bases for columns, 5.1.3:providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), 5.22.6:steel reinforcement for r.c.c work including straightening, cutting, bending, placing i

CTN :45239304

25 May, 2026 28.10 Lacs

Delhi - Delhi

Tender For corrigendum : upgradation and replacement of old energy meter cubical panel board in switch room at pv hostel lodhi road new delhi.

State Government

CTN :45319932

08 Jun, 2026 5.30 Lacs

Hanumangarh - Rajasthan

Tender For repair of electrical starter and cubical panel board of various rural water supply scheme under sub division tibbi

State Government

CTN :45319934

08 Jun, 2026 2.50 Lacs

Hanumangarh - Rajasthan

Tender For repair of electrical starter and cubical panel board of urban water supply scheme under sub division tibbi

CTN :45250294

26 May, 2026 28.54 Lacs

Faridabad - Haryana

Tender For upgradation of existing ei and fans in type-ii, iii, iv and type-v qtrs at old residential colony nh-iv faridabad (sh:- replacement of cubical type meter panel board)

CTN :45268466

10 Jun, 2026 NA

Srinagar - Jammu And Kashmir

Tender For annual maintenance rate contract for repairs /replacement to cubical control panel, panel board and switch gears etc. at various dewatering stations located in and around srinagar city

CTN :45119017

29 May, 2026 NA

Mathura - Uttar Pradesh

Tender For supply of latest is and description , supply and install non return valve nrv of ci of size 50 mm as per latest is and description , supply and fixing stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle, of dia 20 mm as per latest is and description , supply and fixing stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle, of dia 15 mm as per latest is and description , supply and fixing mild steel pot strainer of 100 mm bore as per latest is and description , supply and fixing new mild steel ystrainer of 80 mm bore as per latest is and description , supply and fixing new mild steel ystrainer of 65 mm bore as per latest is and description , supply and fixing new mild steel ystrainer of 50 mm bore as per latest is and description , supply and install pressure gauge in the pipe lines suitable for dia 15 mm pipe as per latest is and description , supply and install thermometers in the pipe line suitable for dia 15 mm as per latest is and description , gi pipe medium grade of 50 mm dia , gi pipe medium grade of 20 mm dia , gi pipe medium grade of 15 mm dia , supply assembly and erection of pgi sheet with tdf flange of thickness 22 gauge sheet as per description , m and l for duct insulation with 25 mm thick all as per description , m and l for wraping glass cloth incl uv chemical coating over nitrile rubber. thickness of glass cloth shall be provided as per oem recommendation , m and l for supply air grilis with extruder aluminium powder coated and size and type of air grills alongwith air volume shall be provided as per oem recommendation , m and l for return air grills with extruder aluminium powder coated without air volume control shall be provided as per oem recommendation , dismantling old false ceiling any type as per description , supply and install 3 way valve of ci of size 80 mm dia , demolition of brick work or floor as per description , m and l for brick work with sub class b brick straight or curved as per description , m and l for plastering 12 mm thick on fair faces of brick as per description , m and l 150 mm thick cement concrete 1 ratio 2 ratio 4 type b2 40 mm graded broken stone aggregate as per description , supply laying testing xlpe cable insulated heavy duty 1100 volts aluminium conductor of size 150 sq mm 3 and half core as specified and directed , m and l for 100 mm bore steel tubing light grade complete all as specified and as directed , supply laying testing xlpe cable insulated heavy duty 1100 volts aluminium conductor of size 95 sq mm 3 and half core as specified and directed , m and l for xlpe insulated armoured ug cables 3 point 5 core x 50 sqmm 1100 volts grade aluminium conductor including termination complete as specified and directed , m and l for xlpe insulated armoured ug cables 3 point 5 core x 35 sqmm 1100 volts grade aluminium conductor including termination complete as specified and directed , m and l for xlpe insulated armoured ug cables 4 core x 16 sqmm 1100 volts grade aluminium conductor including termination complete as specified and directed , m and l for earthing complete with gi earth plate electrode 600 x 600 x 6 mm thick burried directly in ground with 32 x 6 mm gi strip , sitc of lt control panel board cubical type indoor type floor mounted weather proof fabricated out of 2 point 0 mm crca sheet ae per drawing.

Central Government/Public Sector

CTN :45126191

18 May, 2026 NA

Gaya - Bihar

Tender For auction sale of others - scrap miscellaneous items (1)lot no-ph/store/gaya 04, celling fan 1200mm sweep, 408nos, fe-1346.40kg, cu-83.232kg, al-134.64kg (2)lot no-ph/store/gaya 04, celling fan 1400 mm sweep, 345nos, fe-2104.5kg, cu-109.71kg,al-238.05kg (3)lot no-ph/store/gaya 04, lt cubical panel, 07nos,fe-420kg, cu-14kg, al-28kg (4)lot no-ph/store/gaya 04, glow sign board, 32nos, fe-32kg, cu-0.32kg, al-1.6kg (5)lot no-ph/store/gaya 04, lt panel, 01no, fe-370kg, cu-41kg, al-0.05kg (1-5)location-ph/store/gaya

Capacitor Panel Board Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

Central Government/Public Sector