Latest carbide end mill Tenders | Government carbide end mill Tenders

CTN :45536929

03 Jul, 2026 NA

Bangalore - Karnataka

Tender For supply of solid carbide slot drill 3 x 3 x 12 x 38,solid carbide slot drill 3 x 3 x 15 x 50,solid carbide slot drill 3 x 3 x 20 x 75,solid carbide slot drill 4 x 4 x 15 x 63,solid carbide slot drill 4 x 4 x 20 x 75,solid carbide slot drill 5 x 5 x 15 x 63,solid carbide slot drill 5 x 5 x 20 x 75,solid carbide slot drill 6 x 6 x 15 x 63,solid carbide slot drill 6 x 6 x 20 x 75,solid carbide end mill 1 x 3 x 8 x 38,solid carbide end mill 1.5 x 3 x 10 x 38,solid carbide end mill 2 x 3 x 10 x 38,solid carbide end mill 3 x 3 x 15 x 63,solid carbide end mill 4 x 4 x 12 x 50,solid carbide end mill 4 x 4 x 15 x 63,solid carbide end mill 4 x 4 x 20 x 75,solid carbide end mill 4 x 4 x 25 x 100,solid carbide end mill 5 x 5 x 20 x 75,solid carbide end mill 6 x 6 x 15 x 63,solid carbide end mill 6 x 6 x 20 x 75,solid carbide end mill 10 x 10 x 20 x 75,solid carbide end mill 10 x 10 x 25 x 100,solid carbide end mill 10 x 10 x 30 x 125,solid carbide end mill 10 x 10 x 30 x 150,solid carbide end mill with r0.5 corner radius 3x0.5r x 3

CTN :45517049

25 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply of solid carbide end mill tialn coated cutter size-dia 10 mm x fl-22 mm (min. ) oal-72 mm (min. ) cr-1.50

CTN :45331476

13 Jun, 2026 NA

Jabalpur - Madhya Pradesh

Tender For corrigendum : supply of coated carbide insert cnmg 120412 with suitable chip breaking geometry for machining of casting/forg , coated carbide insert xpmt 150512r with suitable chip breaking geometry. note: - other terms and con , solid carbide end mill cutter dia 12.0 mm, flute length min. 30 mm, overall length min. 75 mm, shank , parallel shank solid carbide end mill cutter dia 8.0 mm, flute length min. 30 mm, overall length min.

State Government

CTN :45462730

20 Jun, 2026 NA

Vadodara - Gujarat

Tender For annual rate of hotmix material for various roads under rajpipla (r&b) division rajpipla (2026-27) - providing and laying premix semi dense bituminous concrete with b.t. aggregate as per morth gradation & using bitumen emulsion rs-1 as per is 8887: for tack coat @2.50 kg./10 sq.m. on bt surface with asphalt grade vg-30 for mixing @ 50.00 kg./m.t. including heating and mixing the aggregate and asphalt by continuous of batch mix plant and hot laid process laying with paver finisher and consolidation with roller as per morth specification to achieve desire density, including cost all materials equipments, tools and plants, oil, kerosene, firewood, labour charges etc. complete using contractor's own machineries batch mix plant and paver finisher etc. complete. plant and paver finisher etc. complete. providing and laying 50 mm thick bituminous macadam with b.t. aggregate as per morth specification and using bitumen emulsion rs-1 as per is 8887: for tack coat @2.50 kg. / 10 sq.m. on bt surface with mechanical sprayer and bulk asphalt vg 30 for mixing @ 34.00 kg./m.t. i.e. 3.40 percentage of total weight of mix including heating and mixing the aggregate and asphalt in continuous of drum mix plant and hot laid process spreading the same by paver finisher and consolidation with roller as per morth specification to achieve desire density, including providing all materials equipments, tools and plants, fire wood, oil, kerosene, labour charges etc. complete using contractor's own machinery drum mix plant and paver finisher etc. complete. providing & laying bituminous grout 37.5 mm thick compacted with asphalt of vg 30grade @ 1.99 percentage by weight of mix for mixing and 2.5 kg/10 sqm. of rapid curing emulsion for tack coat and using b.t. chips of required gradation including cleaning and heating asphalt premix materials by hot mix process in proper gradation and laying with sensor paver finisher and consolidation work as per most specifications including cost of materials labours labour equipment and plant fuel oil complete.... providing and laying 250mm thick wet mix macadam (w.m.m.) in two layers (each layer of 150mm avearge) using machine crushed black trap aggregate of 40 to 50 mm size in the material with water omc in mechanically mix (pug mill) carriage of mix material by contractor's 1.000 own tipper to site of work including laying, spreading and compacting in sub base, base course on well prepared under base of compacting as per most specification to achieve the desired density (mechanically providing & laying bituminous prime coat asphalt @ 7.5 kg / 10 sqm. of slow curing emulsion as per most specifications including cost of materials labours labour equipment etc. complete..... labour charges for spreading hotmix / drum mix material on scattered area of road by manually in regular shape including surface dressing with wire brush and spreading of sand including cost of sand. complete. (for patch work) labour charges for spreading hotmix / drum mix material by paver finisher including heating and spraying tackcoat as per requirement consolidation by static roller and spraying stone dust as directed etc. complete. providing and laying asphalt painting on b.t. surface with bitumen v.g. 30 at rate of 5 kg./10 sq.mt. and spreading stone dust on painting surface at the rate of 0.03 cu.mt. / 10 sq.mt. in selected length of the road including rolling and cost of asphalt. providing. laying built-up spray grout base course intwo layers with bitumen at rate of 15 kg./per 10 sq.m. with 0.50 cu.m. stone aggregate for first layer and 15kg. of bitumen and 0.50 cu.m. of stone aggregate per 10 sq.μ. of roadsurface for second layer and using 0.13cu.m. of key aggregate per 10 sq.m. excluding rolling and consolidation complete. (stone aggregate and bitumen shall be paid separately) surface dressing two coat with bitumen using 18kg.bitumen per 10.0 sq.m. with 0.15 cu.m. of stone chipping 12mm nominal size per 10.0 sq.m. for first coa

CTN :45432686

18 Jun, 2026 NA

Sultanpur - Uttar Pradesh

Tender For supply of solid carbide end mill dia. 8 mm, shank dia. 8 mm, flute length 28 to 35 mm, overall length 75 to 80 mm, flutes-4, helix angle 40 to 50 degree, for alloy steel minimum 40 hrc, for finishing machining, coated for long life.(item code-4100400613)

CTN :45422164

24 Jun, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of solid carbide end mill(tialn coated with ultra fine subtrate) dia 06 mm (three fluted) fl-25-30 mm, oal-75 mm [ warranty period: 30 months after the date of delivery ] ]

CTN :45114177

11 Jun, 2026 5.20 Lacs

Panchkula - Haryana

Tender For corrigendum : tender for supply of cutting tools -indexable insert type 45 deg milling cutter dia 25 ws dia 25 z2 as per detail in anexure a , inserts for above cutter dia 45 as per detail in anexure a , indexable insert type 45 deg. face milling cutter dia 50 bore dia 22 z4 as per detail in anexure a , inserts for above cutter dia 50 as per detail in anexure a , indexable insert type 45 deg. face milling cutter dia 100 bore dia 32 z4 as per detail in anexure a , inserts for above cutter dia 100 as per detail in anexure a , wiper insert for above cutter dia 100 as per detail in anexure a , solid carbide ball nose end mill dia.12 ss dia 12 as per detail in anexure a , special solid carbide ball nose end mill grade tin coated dia 20 s s dia25as per detail in anexure a , square shoulder face mill mill dia 50 bore dia 22mm z5 , suitable inserts for above face mill cutter dia 50 as per detail in anexure a , solid carbide end mill dia 10mm , weldon shank dia 10mm as per detail in anexure a , solid carbide end mill dia 20mm , weldon shank dia 20mm , solid carbide end mill dia 10.2mm , weldon shank dia 12mm , hss machine tap m12x1.75 , straight shank dia 9mm