Latest carbide tip tool Tenders | Government carbide tip tool Tenders

CTN :45419407

13 Jun, 2026 NA

Multi City - Multi State

Tender For supply of 10 head hydrotesting machine,5 head closed loop degassing,internal cleaning machine,6 head pneumatic testing bench,chain conveyors,conveyor section 90 deg bend,digital torque wrench,low voltage lamp and magnetic probe,5 hp helical drive units,removal of existing conveyors,shifting of existing equipment

Central Government/Public Sector

CTN :45396832

04 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of set of ss tubes and double ferrule fittings for air spring pneumatic control equipment of lhb bogies as per annexure attached. [ warranty period: 48 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45393859

08 Jun, 2026 NA

Jhajha - Bihar

Tender For supply of electro pneumatic brake controller type ed 6 complete for wsf type brake equipment of emu's wsf pt.no d 74888/1. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45386932

16 Jun, 2026 6.59 Crore

Gwalior - Madhya Pradesh

Tender For construction and development (civil work) for construction and demolition waste plant of 100 tpd as per boq of rfp/dpr supplying erection and commissioning of machines/equipment for construction and demolition (c and d) waste plant of 100 tpd 2nd cal - all kinds of soil, "excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers,, loose or soft soil, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all w, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate., "foundations, footings, bases of columns, etc. for mass concrete.", cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate., "columns, pillars, piers, abutments, posts and struts.", "reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves,, "lintels, beams, plinth beams, girders, bressumers and cantilevers.", "along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm o, "filling by available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exce, thermo-mechanically treated bars. (fe 500 d or more), "aluminum turbo ventilator fan, size: dia 600 mm market rate", "sky light market rate ", 80x1.25mm m.s. laths with 1.25 mm thick top cover., "providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to is: 1868 wit, cement mortar 1:6 (1 cement : 6 coarse sand), 1:6 (1 cement: 6 sand), two or more coats on new work, "structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoist, 0.80mm thick with zinc coating not less than 275gm/m , 0.80mm thick with zinc coating not less than 275gm/m , "35 mm thick including isi marked stainless steel butt hinges withnecessary screws.", 35 mm thick shutters, half brick masonry with of class designation 40 in foundation and plinth in.cement mortar 1:4 (1 cement : 4 coarse san, "providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) nano polished (glossy, providing and laying broken china mosaic flooring for terrace using 12mm to 20mm broken pieces of glazed tiles to be lai, providing and fixing m.s. grills of required pattern to wooden frames of window etc. with m.s. flats at required specin, "construction of embankment/sub grade/ earth shoulders, as per clause 305 & its sub-clauses, where required but with app, "construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor, "providing, laying, spreading and compacting graded stone aggregate to wet mix macadam including premixing the material, providing and applying primer coat with cationic bitumen emulsion (ss1 grade) on prepared surface of granular base inclu, @ 0.25 kg per sqm (normal bituminous surfaces), for grading ii( 50-75mm thickness ) bitumen content 3.4% (vg-30), "for grading ii ( 30-40 mm thickness ), bitumen content 5.4% (vg-30)", procurement of fully automatic c&d waste processing unit(100 tpd) with dry and wet process inculding feeding & crushin, procurement of table vibrator for paver making unit including table vibrator,colour mixer,colour pigment,tables,concre, procurement of fully automatic fly ash bricks machine (120 ton compress force) with fully sensor based controlled 7 nos, procrement of vehicles articulated front end wheel loader,4-wheel drive,1.4 cum bucket,hydrostatic drive,, procrement of vehicles/tipper truck blazo 28t tipper,9 speed,bogie suspension,11x20-16pr tyres,6.17rar ,nac,16 cum box,4, procurement of pneumatic breaker (quotation), electrification /internal wiring and electrification (market rate)

CTN :45375846

19 Jun, 2026 NA

Malkapur - Maharashtra

Tender For mechanicalpipeline works&equipment erection for product,firewater,pneumatic,foam pipeline&allied civilworksfor atf&hsd facility malkapur installation

Central Government And Public Sector

CTN :45380325

12 Jun, 2026 NA

Multi City - Multi State

Tender For supply of drill,hss,15.5mm , bit,drill,morse taper,twist,hss,16mm , bit,drill,taper,twist drill,hss,16.50mm , bit,drill,taper,twist drill,hss,17mm , bit,drill,morse taper,twist,hss,18mm , bit,drill,taper,twist drill,hss,18.50mm , bit,drill,morse taper,is5103,14.75mm , bit,drill,taper,twist drill,hss,20mm , bit,drill,morse taper,is5103,38.50mm , bit,drill,morse taper,hss,is5103,24mm , bit,drill,taper,twist,hss,24.75mm , bit,drill,taper,twist drill,hss,28mm , bit,drill,taper,twist,hss,29mm , bit,drill,morse taper,hss,is5103,29.5mm , bit,drill twist,taper,hss,30mm , bit,drill,morse taper,twist drill,31mm , bit,drill,taper,twist drill,hss,34mm , bit,drill,taper,hss,is5103by69,35.5mm , bit,drill,taper,twist drill,hss,36.5mm , bit,drill,taper,twist,hss,37mm , bit,drill,taper,twist drill,hss,38.50mm , bit,drill,taper,twist drill,hss,39.50mm , bit,drill,taper,twist drill,hss,40.50mm , bit,drill,taper,twist drill,hss,41.50mm , bit,drill,taper,hss,is5103by69,41mm , bit,drill,taper,hss,is5103by69,43.0mm , bit,drill,morse taper,hss,is5103,45mm , bit,drill,taper,hss,is5103by69,46.0mm , bit,drill,taper,twist drill,hss,47mm , bit,drill,morse taper,hss,is5103by69,48mm , bit,drill,morse taper,flat end,hss,50mm , bit,drill,taper,twist,hss,56mm , bit,drill,taper,twist,hss,60mm , bit,drill,taper,twist,hss,65mm , thread repair kit,m8x1.25mm , insert system kit,m10x1.5mm , insert system kit,m12x1.75mm , insert system kit,m16x2mm , bit,drill,parallel,carbide tipped,4mm , bit,drill,parallel,carbide tipped,5mm , bit,drill,parallel,carbide tipped,6mm , bit,drill,parallel,carbide tipped,7mm , bit,drill,parallel,twist drill,8mm , bit,drill,parallel,twist drill,9mm , bit,drill,parallel,twist drill,10mm , bit,drill,parallel,twist drill,11mm , bit,drill,taper,twist drill,10mm , bit,drill,carbide,twist,ct,12mm,is8306 , bit,drill,taper,twist drill,18mm , str turning tool,ct,iso1 l 2020 p30 , boringbyfacing tool , boring tool,p30 stl,iso 8r 3232 , boring facing bar,iso9r0808p30 , boringbyfacing tool,12x12x180mm , carbide tip tool,iso 9r1616p30 , boringbyfacing tool,tungsten carbide , boring bar,25x300mm , turning tool,cranked round nose , turningbygroovng tool,v profile , hammer,sledge,0.41 0.60kg , hammer,mallet,pvc,200gm,40mm , hammer,mallet,plstc,0.81 1kg , parting off tool,p30 stl,iso7l1006p30 , hand tap set,ground thread,hss,1by8in , hand tap,hss,std,g1by8in bspx28tpi , hand tap,hss,1by2in , hand tap set,hss,3by4in , hand tap,hss,bs 949,1by4in bswx20tpi , hand tap,short shank,5by16in bswx18tpi , hand tap,hss,3by8in bswx16tpi , hand tap set,ground thread,hss,3by8in , hand tap,sf,hss,7by8in bswx9tpi , hand tap,hss,5mm,bsw , hand tap set,m3x0.5,is6175 , hand short mbyc tap,m8x1.25mm , machine tap,hand //bid details 2 / 101 and short,m10x1.5mm , hand tap,short shank,hss,m10x1mm , hand tap set,ground thd,hss,m12x1.50mm , hand tap,ns,hss,m14x2mm,is6175 pt 2 , hand tap set,m16x1.5mm , hand tap,hss,m16x2mm,is6175 pt iii , machine tap,hand and short,m18x2.5mm , machine tap,hand and short,m20x2.5mm , hand tap set,hss,m24x3mm , retapping tap,hss,m27x3mm , tap set,h s mbyc scrwg,m30x3.5mm , tap set,h s mbyc scr,m36x4mm,is6175 pt 3 , hand tap,ns,hss,is617,m39x4mm , hand tap,ns,hss,short shank,m42x4.50mm

State Government

CTN :45370027

16 Jun, 2026 33.14 Lacs

Bengaluru - Karnataka

Tender For replacement of age old 66kv pneumatic circuit breaker and c&r panel of 66kv capacitor bank at 220kv r/s hoody. pertaining to tr (op) circle-south, bengaluru on total turnkey basis including supply of all matching materials/equipment including supply of 66kv breakers and erection (including civil works) of all materials/ equipment, testing and commissioning- on percentage basis

Central Government/Public Sector

CTN :45283339

04 Jun, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of set of ss tubes and double ferrule fittings for air spring pneumatic control equipment of lhb bogies as per annexure attached. [ warranty period: 48 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

corporations/Associations/Others

CTN :45137976

04 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; power house equipment, power generators, overhauling of electrical actuators, pneumatic actuators/control damper & power cylinders; service provider

CTN :45351355

04 Jun, 2026 NA

Pudukkottai - Tamil Nadu

Tender For supply of metrology lab equipment - purchase of lab equipments, digital vernier caliper (0 - 150mm) specifications: measuring range: 0 200 mm least count / resolution: 0.01 mm accuracy: 0.02 mm material: hardened stainless steel measurement: outside, inside, and depth measurement display: digital lcd power supply: battery operated protection: ip54 or better make: reputed brand such as mitutoyo / insize / baker or equivalent, digital micrometer specifications: measuring range: 0 25 mm least count / resolution: 0.001 mm accuracy: 0.002 mm measuring faces: carbide tipped display: digital lcd repeatability: 0.001 mm protection: ip54 or better power supply: battery operated material: hardened stainless steel frame make: reputed brand such as mitutoyo / insize / baker or equivalent, pneumatic trainer board specifications: type: modular pneumatic training system working pressure: 2 8 bar components: frl unit with pressure gauge (0 10 bar) 3/2 valve 2 nos 5/2 dc valve 2 nos flow control valve 2 nos double acting cylinder 1 no single acting cylinder 1 no tubing: pu tubes with push fit connectors panel: rigid modular panel with mounting slots power supply: 24v dc (for solenoid valves) modular training panel with sturdy metal frame all cylinders, control valves, limit switches and other accessories should be kept separately and should not be fixed permanently in the board/ stand.

Carbide Tip Tool Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

State Government

Central Government/Public Sector

corporations/Associations/Others