Latest carbide tip Tenders | Government carbide tip Tenders

Central Government/Public Sector

CTN :45437002

12 Jun, 2026 NA

Bengaluru - Karnataka

Tender For supply of sofa set 3+1+1 with centre table, upholstery material-leather, material of sofa set frame- engineered wood, type of base-zigzag springs, type of centre table-teak wood , size-36inches 21inches with 2 years warranty [ warranty period: 24 months after the date of delivery ] ]

State Government

CTN :45397974

11 Jun, 2026 80.77 Lacs

Kota - Rajasthan

Tender For work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all lift, dewaterin

State Government

CTN :45433972

22 Jun, 2026 NA

Ukai - Gujarat

Tender For supply of primary belt scraper, spring-loaded, segmented polyurethane tip, ss fasteners, 1200mm belt , spare blade for primary belt scraper, polyurethane tip, ss fasteners, 1200mm belt , secondary belt scraper, sprung elastomount, tungsten carbide tip, polymer deflector plates, ss fasteners, 1200mm belt , spare blade for secondary belt scraper, tungsten carbide tip, polymer deflector plates, ss fasteners, 1200mm belt , primary belt scraper, spring-loaded, segmented polyurethane tip, ss fasteners, 1400mm belt , spare blade for primary belt scraper, polyurethane tip, ss fasteners, 1400mm belt , secondary belt scraper, sprung elastomount, tungsten carbide tip, polymer deflector plates, ss fasteners, 1400mm belt , spare blade for secondary belt scraper, tungsten carbide tip, polymer deflector plates, ss fasteners, 1400mm belt , self-adjustable internal scraper v- plough, polymer block, 1200mm belt , spare polymer blocks for internal scraper v-plough, 1200mm belt * /bid number : gem/2026/b/7563860 + /dated: 04-06-2026 ' ' / bid document 1 / 13

Central Government/Public Sector

CTN :45417504

24 Jun, 2026 NA

East Singhbhum - Jharkhand

Tender For rate contract for spares for normet make - rate contract for spares for normet make, spacer flange part no 4570149, bushing part no 5051925, meter set complete part no 5124748, shelter plate part no 5613380, seal part no 5700467, magnetic plug part no 5728380, brake cam part no 5728992, hose assembly part no 6045630, hose assembly part no 6045640, hose assembly part no 6045660, hose assembly part no 6045690, hose assembly part no 6046860, pr. releif valve part no 10000283, inner scissor part no 15078270, base frame part no 15243570, side guide part no 15243580, jack part no 15246970, external scissor part no 15270317, meter kit part no 15876220, platform frame part no 16098380, widener part no 16098800, widener part no 16098810, flange part no 25131541, distributor block part no 31715063, guide part no 33091208, cylinder tube part no 33300971, exhaust purifier part no 35058429, axle part no 35071729, axle part no 35071737, axle part no 35071745, bearing housing part no 35071786, pin part no 35071869, stripe tape part no 35120427, bushing part no 35340280, lifting lug part no 35552010, pin part no 35562600, armour part no 35662630, gear shifter part no 35843460, gear shifter part no 35843750, frame joint part no 35994500, shelter plate part no 35995460, rubber mat part no 36059100, air cleaner part no 36094350, elbow part no 36094390, framing plate part no 36192420, framing plate part no 36192450, damper rubber part no 40590200, coupling part no 41211343, work light cover part no 41483223, framing part no 41483231, grid iron part no 41483272, roller part no 41555608, hose support part no 41575242, banjo bolt part no 41662552, hinge plate part no 41753526, pin part no 41753807, coupling part no 41777046, axle part no 41820416, spacer ring part no 41821380, fastener part no 41887951, hose support part no 41889601, rail pipe part no 41906702, hinge part no 41950437, seat (opt) part no 41952250, support part no 41954504, fastening screw part no 41956731, junction part no 41959875, piston part no 42842799, piston rod part no 43300946, charge valve assy. part no 45042200, extension pipe part no 45051570, flange part no 45071800, bearing housing part no 45071818, sliding part part no 45071842, pin part no 45071859, sliding part part no 45072170, bearing housing part no 45073608, flexible pipe part no 45100997, exhaust pipe part no 45137668, hinge part no 45155652, bearing plate part no 45170131, flange part no 45170149, tightening part no 45177177, groove sleeve part no 45178118, fastening plate part no 45249790, spacer ring part no 45271930, brake linkage part no 45319800, reduction fitting part no 45331540, rod part no 45363670, reduction fitting part no 45366250, extension shaft part no 45367100, adapter flange part no 45367110, junction part no 45431190, extension pipe part no 45435200, lug part no 45437070, pressure plate part no 45482150, plain bearing part no 45482190, coupling part no 45491400, pin part no 45497970, bolt part no 45497990, shelter plate part no 45498000, reduction fitting part no 45499330, intermediate flange part no 45513430, pin part no 45554240, pipe handle part no 45555480, fitting part no 45566220, seal part no 45567360, cover plate part no 45572480, support part no 45615110, shelter plate part no 45663500, stand part no 45668930, valve assy part no 45673610, brake valve part no 45675730, shuttle valve part no 45677350, fastener part no 45709100, mounting plate part no 45709110, fastening plate part no 45711200, propeller shaft cover part no 45716750, stand part no 45718710, fastener part no 45789870, handle part no 45813130, u-bracket part no 45844690, hydraulic throttle pedal part no 45882450, brake valve part no 45886440, magnetic valve fittings part no 45887140, ls-signal valve fittings part no 45888370, drivers panel part no 45924870, hinge part no 45933130, top holder part no 45952340, graphite seal part no 45970700, junction part no 45980780, pressure relief valve part no 45981870, pressure relief v

Central Government And Public Sector

CTN :45436763

23 Jun, 2026 NA

Bengaluru - Karnataka

Tender For supply of electrical panel enclosure - 2200 (h) x 1200 (w) x 800(d) with following description: 1. size: 2200 height x 1200 width x 800mm depth of double door. 2. material: crca (cold rolled close annealed) sheet steel. 3. structure: 2mm thickness (14 swg) for panel structure and 1.6mm (16 swg) for doors and covers. 4. base frame: a 200mm high channel base for mounting and cable entry. 5. paint finish: epoxy powder-coated with 7- or 10-tank pretreatment for corrosion resistance, typically ral 7032 (siemens grey) orral 7035 (light grey). 6. doors: front and rear doors with stiffeners, neoprene/pu foam gaskets (for sealing), and lift-off hinges with key-lockable handles. 7. ventilation: louvered ventilation slots with air filters. 8. protection: ip65/ip66 (dust-tight and water-resistant for harsh environments). 9. mounting plates: zinc-plated or painted mounting plates for mounting plc racks, smps, and relays. 10. gland plate: 3mm thick detachable gland plates for bottom or top cable entry. 11. earthing: copper earthing busbar (25x5mm) at the bottom, with copper braided straps to connect all doors and side panels. 12. lighting/power: internal led lighting with limit switch and 230vac 5 pin socket. 13. document holder: a pocket attached to the inside door. [ warranty period: 12 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45405703

30 Jun, 2026 NA

Bangalore - Karnataka

Tender For supply of "automatic spray gun along with carbide tip,carbide needle and air cap assembly to part no a-c3f-0-9c of m/s.paasche air brush company". ]

CTN :45433211

19 Jun, 2026 NA

Meerut - Uttar Pradesh

Tender For supply of stand for stationary base l and t , stand for under frame l and t , stand for revolving base l and t , stand for cradle l and t , ms support stand tasl , structure working stool tasl

CTN :45113406

06 Jun, 2026 NA

Jabalpur - Madhya Pradesh

Tender For bid to ras supply of prefabricated sheet , sliding window with net , structure base frame , exhaust fan with electric point , installation and commissioning

CTN :45413730

09 Jun, 2026 NA

Tiruvallur - Tamil Nadu

Tender For supply of civil department lab apparatus - lab items, auger boring machine (motorised) engine type: 4-stroke, air-cooled, single-cylinder petrol engine displacement: 196 cc power output: minimum 6.5 7 hp ( 3.5 kw) maximum engine speed: ~3600 4000 rpm starting system: recoil (manual) start fuel type: pure petrol fuel tank capacity: minimum 1.5 1.6 l supported auger bit sizes: 4 , 6 , 8 , 10 , 12 , 14 (100 350 mm) bit material: heavy-duty mild steel with powder coating typical drilling depth: minimum 3.5 4 ft per bit (800 mm 1.2 m) bit coupling: quick-coupling system for easy bit replacements frame: robust tubular steel frame with ergonomic handles and vibration absorbers weight: minimum 20 22 kg (without auger bit) , flow table apparatus for concrete with accessories dimensions and specifications as per is 9103, table top made from flat metal plate, minimum thickness 1.5 mm. table top size: 700 mm 700 mm, with flatness tolerance of 1.5 mm. table top marked with: scribed cross at centre, lines parallel to table edges and central circle of 200 mm diameter underside of table top reinforced to prevent distortion. total mass of table top: 16 1 kg. table top, base frame front and upper stops provided as per is 9103. lower front edge fitted with two rigid stops to transfer load directly to base frame. base frame designed to transfer impact load directly to supporting surface, minimizing bounce. stop watch digital - 2 nos scale 1 mtr 2 nos mounting wooden platform 300 mm height amc for 3 years inclusive.

CTN :45415617

08 Jun, 2026 40.00 Lacs

Anantnag - Jammu And Kashmir

Tender For rate contract for supply of materials and execution of various maintenance works, as and when required during emergency in electric division anantnag kpdcl for the fy year 2026-27 - supply, erection, testing & commissioning of s.t pole 11mtr. long sp-56 with base plate & cap for ht. strictly as per rec standards, erection, testing & commissioning of s.t pole 11mtr. long sp-56 including its carriage from divisisonal store to site, supply, erection, testing & commissioning of s.t pole 9mtr long sp-33 with base plate & cap for ht. strictly as per rec standards, erection, testing & commissioning of s.t pole 9mtr long sp-33 including its carriage from divisisonal store to site, supply, erection, testing & commissioning of s.t pole 8mtr long sp-15 with base plate & cap for lt. strictly as per rec standards, erection, testing & commissioning of s.t pole 8mtr long sp-15 including its carriage from divisisonal store to site, providing of hydraulic crane on hire basis for loading/unloading of dts of different capacities inclouding fuel and operator faling in the juridection of ed anantnag, erection, testing & commissioning of pcc pole 8mtr long including its carriage from divisisonal store to site, supply, laying, stringing, tensioning & binding of acsr 100mmsq (dog) conductor, laying, stringing, tensioning & binding of acsr 100mmsq (dog) conductor including its carriage from divisisonal store to site, supply, laying, stringing, tensioning & binding of acsr 50mmsq (rabbit) conductor, laying, stringing, tensioning & binding of acsr 50mmsq (rabbit) conductor including its carriage from divisisonal store to site, supply, laying, stringing, tensioning & binding of acsr 30mmsq (weasal) conductor, laying, stringing, tensioning & binding of acsr 30mmsq (weasal) conductor including its carriage from divisisonal store to site, providing & fixing of ismc 100x50x6mm channel iron cross arms for x-mer frame 9long @ 25.2 kg each -1 no including nuts & bolts, fixing of ismc 100x50x6mm channel iron cross arms for x-mer frame 9long @ 18.63 kg each -1 no including nuts & bolts, providing & fixing of ismc 75x40x6mm channel iron cross arms for x-mer frame- 1 nos @18.63 kg each 9 long including nuts & bolts, fixing of ismc 75x40x6mm channel iron cross arms for x-mer frame-, providing ,fixing, of ismc 75x40x6mm x-arm 5 long, fixing, of ismc 75x40x6mm x-arm 5 long-, providing ,fixing, of ms angle iron braces 50x50x6mm-4.5 ft long,, fixing, of ms angle iron braces 50x50x6mm-4.5 ft long, providing and fixing of sprial earthing made of 115 turns of gi wire swg no.8 placed 1.5m below ground level including excavation of pit, refilling the same withsoft soil, fixing of sprial earthing made of 115 turns of gi wire swg no.8 placed 1.5m below ground level including excavation of pit, refilling the same withsoft soil, supply,fixing, testing & commissioning of 11kv link set (polymer) station type as per is standards, fixing, testing & commissioning of 11kv link set station type (polymer/porcelain )as per is standards, supply,fixing, testing & commissioning of 11kv link set heavy duty as per is standards, fixing, testing & commissioning of 11kv link set heavy duty (polymer/porcelain ) as per is standards, supply,fixing, testing & commissioning of 11kv do fuse set (polymer )as per is standards, fixing, testing & commissioning of 11kv do fuse set (polymer/porcelain ) as per is standards, supply,fixing, testing & commissioning of 11kv la set (polymer )as per is standards, fixing, testing & commissioning of 11kv la set (polymer/porcelain ) as per is standards, providing and fixing of lt fuse set as approved by kpdcl., supply,fixing, testing & commissioning of 11kv disc set (polymer) 45 kn complete set, supply,fixing, testing & commissioning of 11kv disc set (porcelain) 45 kn complete set, fixing, testing & commissioning of 11kv disc set (polymer/po

Carbide Tip Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector