Latest carbon electrode Tenders | Government carbon electrode Tenders

Central Government And Public Sector

CTN :41819101

22 Sep, 2025 NA

Multi City - Multi State

Tender For supply of 10 a modular switch , 20 a modular switch , 6 a 3 pin socket , 6 or 16 a modular socket , 3 pin 6 a plug top , 16 a 3 pin plug top , pvc surface plastic box 3 module , pvc surface plastic box 6 module , pvc surface plastic box 8 , deko plate for 3 module , deko plate for 6 module , deko plate for8 module , 3c x 1.5 sqmm round cu wire , 3c x 2.5 sqmm round cu wire , 1.5 sqmm frls , 2.5 sqmm frls , 4 sqmm frls , spmcb 16a , tpmcb 32a , tpmcb 63a , 400 mm bldc wall fan

Central Government/Public Sector

CTN :41819339

14 Oct, 2025 NA

Multi City - Multi State

Tender For supply of traction center machined for vb/ts, as per drawing: drg no. d-a675uv2-137352 rev-01., packing instruction: detail of revised packing instruction of traction center to plno. 33500113 1. the traction center to pl no. 33500113 is to be properly wrapped in biodegradable transparent plastic sheet separately and separated with corrugated paper so that it should not rub during transportation. 2. the packing shall be such that all the machined surface shall be properly protected against rubbing /impact/scratches with each other with any mode of transportation i.e wagon/truck/trailers etc. 3. the traction center to pl no. 33500113 should be packed in 15 nos in iron box pallet (returnable) / wooden box prepared by firm suitable for said items. the items should be separated by using suitable eco friendly cushioning material to avoid rubbing. the packing shall be such that transit damage if any shall be at the cost of supplier till unloading in shell depot. 4. each packing should have an identification showing p.o. no., pl no. description, drawing no./spec., quantity, firm's name & address and dispatch detail etc. note:- iron box pallet shall be returned to firm when empty. 5. in addition to this, the following instructions can be considered to be added to the packing instructions for ensuring proper identification and linkage of the items against the purchase orders:- 5.1 the item or its packing shall carry a qr code containing the details as listed below:- a. name of the manufacture b. purchase order number c. purchase order date d. unique serial number (or lot number for bulk items) of the manufacturer or e. date of manufacture f. delivery challan no. g. delivery challan date 5.2 the qr code shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. 5.3 in casethe above details are not available or the qr codes are not readable, the supplied material is liable to be rejected. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41799867

03 Oct, 2025 NA

Raigad - Maharashtra

Tender For tender for supply of crc 2-26, 300 gms self spraying aerosal for elec maintainence., nexus (germany) make, two leg puller model no. 100-1.5,, dia. 25-130mm, leg: 100mm, torque: 80nm, spindle measurements:, m14 x 1.5 x 130., residual current circuit breaker [rccb], 63a 440v rating, three phase and nuetral, sensitivity 100 milliamp trip free mechanism, touch proof terminals ip20, resistance against unwanted tripping, conforming to relevant iec/bis standard, make: siemens/l and t/ legrand/havells/ge/abb/ schneider., plug top suitable for 16 amp. flameproof. weatherproof switch socket, 3 pin (2p+1e), in lm6 (cast a1) construction for single phase switch so cket. cat.no.ss/oa/1011, make: sudhir switchgear for urea plant., black ink ribbon part no lm ir508 for ferrule printing machine model lm-550a2/pc, make max co ltd. japan, reversible 2 way screw driver, magnetic hex shank, size: 6 inch, head type: one side flat/ slotted head and one side, phillips head, holder material: plastic, blade material: steel, make: taparia 905 h/jhalani/equivalent, industrial metal clad ap20 plug top 20 amp., 250 volts, cast aluminium 3 pin, crompton make, industrial metal clad ap10 plug top 10 amp 250 volts, cast aluminium 3 pin, crompton make, battery flat 9 volt of make duracell/energizer, insulation tape type p 101 frlt tape, size: 1.9 cm x 20me roll, fire retardant type, breake down voltage 2kv make permacel., battery pencil cell 1.5 volt heavy duty everedy model no.: 1015 r6/aa/um3 guaranted upto 0.6cv eveready make, battery cell 1.5volt, make: novino national neo type-r03 nt aaa, masonary (concrete) drill bit straight shank size: 4mm., masonary (concrete) drill bit straight shank size 6mm., masonary(concrete) drill bit straight shank, size: bmm, masonary (concrete) drill bit straight shank, size: 10mm, box spanner set-24 piece socket wrench set: 1/2" square, drive set-consisting of: 1-250 reversible ratchet handle, 1-250 slidin gt-bar, 1- universal joint, 1-420 mm speeder handle, 2 extension, box spanner set gadre or equivalent reputed make containing complete set of box spanner sockets, rachets, handles and other adoptors size: 6 mm to36 mm., ink ribbon case part no lm-rc500 for ferrule printing machine model lm-550a2/pc,make max co ltd. japan, heating element zero bend type. rating-2kw, 230vac, 50hz., mocnickel chromium steel complete with 1/2" bsp fixing nut. length 1350mm, suitable for surface load 3.2/cm2. as per attached drawing., motor fan for 0.75kw, 1500 rpm, 805 frame motor., coating: the fan shall be powder coated, cooling fan moc-ms., sheet thickness shall be minimum 3 mm., motor fan for 30hp (22kw)/1500 rpm 180 1 frame motor, motor fan for 75 kw, 1500 rpm (motor of ie2 class) 280 m & 280 s motors, motor fan for 75 kw, 3000 rpm, 280 s & 280 m frame size motor, motor fan for 3.7 kw,3000 rpm, motor of iez class) 132 s frame motors, moc: cast iron, motor fan for 60hp (45kw)/3000 rpm 225 s frame motor, motor fan cover for 7.5 kw, 1500 rpm, 132 m frame size motor (motor of ie2 class), moc: ms

corporations/Associations/Others

CTN :41794800

23 Sep, 2025 NA

Mehsana - Gujarat

Tender For annual rate contract for supply of electrical goods for street light and other electrical work in visnagar nagarpalika - supplying of double walled corrugated pipes (dwc) of polyethylene (conforming to is 14930 ii )with necessary connecting accessories of same material at required depth in existing trench for laying of cable. below ground / road surface for enclosing cable ((a)50 mm outer dia, supplying of xlpe (is:7098) (i)-88 isi armoured cable multistrand / solid aluminium conductor for 1.1 kv. to be laid on wall with necessary clampsor in existing trench / pipe of following size of cables (c) 4 core 10 sq. mm, supplying of xlpe(is:7098) (i)-88 isi unarmoured aluminium cable 1.1 kv.grade to be erected as directed of following size.(a) 2 core 2.5 sq. mm, supplying of xlpe(is:7098) (i)-88 isi unarmoured aluminium cable 1.1 kv.grade to be erected as directed of following size. (b) 2 core 4 sq. mm, supplying of flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed. (e) 1.50 sq.mm 3 core round pvc sheathed, supplying of flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed. (h) 2.50 sq.mm 3 core round pvc sheathed, supplying single phase ccms, supplying three phase ccms, repairing of single phase ccms, repairing of three phase ccms, supplying approved make smc press moulded composite frp. loop-in, loop-out approx. 2mm thick box complete with bakelite connector strip 5way(3pplusnpluse),din rail for mounting mob and hinged doors as per requirement having locking arrangements with mounting clamp with nuts, bolts and washers suitable for erection on pole with cable clampsand earth bolt of following size of box.(b) 250mm x 200mm x 100mm [deep], supplying approved make digital time switch having lithium cell 6 years operative and operate battery backup 1 channel day clock with 14 memory programme, suitable to operate on 240v plus 5., 16a with, floating contacts minimum switching setup time 1 minimum and lcd display. also comprised permanent on/off switching. programming switches and housed in fire proof thermoplastic enclosure and transparent cover erected as required with necessary connection erected as directed., supplying electrical insulation l.t. tape role with isi marked having nominal width 1.8 cms nominal length 8.0 mtr nominal thickness 0.125 mm and having self adhesive pvc, plyer 8" (taparia), tester (taparia), screw driver 12" (taparia), safety gloves 11kv, safety shoes, supplying ac-3 duty 3 pole power contactor with 2 no and 2 nc auxcontacts complete with 415v/220v operating coil suitable for (landt, bch,t.c., siemens, cands make). (a) for 25 / 32 a rating, supplying ac-3 duty 3 pole power contactor with 2 no and 2 nc auxcontacts complete with 415v/220v operating coil suitable for (landt, bch,t.c., siemens, cands make). (c) for 60 / 70 a rating, supplying ac-3 duty 3 pole power contactor with 2 no and 2 nc auxcontacts complete with 415v/220v operating coil suitable for (landt, bch,t.c., siemens, cands make). (e) for 110 a rating, supplying miniature circuit breaker single pole 6a to 25a suitable to operate on 240 v a.c. system and having breaking capacity 10 ka to be erected in existing box. confirming to is 8828/1996 with isi mark cat.iii, supplying 240 v mcb double pole switch for lighting load (b curve) having 10 ka breaking capacity and confirms to is : 8828 in existing box having following capacity (a) 6 to 32 amp.cat.iii, supplying 240 v mcb double pole switch for lighting load (b curve) having 10 ka breaking capacity and confirms to is : 8828 in existing box having following capacity (b) 40 amp. cat.iii, supplying 415v mcb four pole switch for lighting load (b curve) having 10ka breaking capacity and confirms to is :8828 in existing box having following capacity (a) 6 to 32 amp. cat.iii, supplying 415v mcb four pole switch for lighting load (b curve) having 10ka breakin

Central Government/Public Sector

CTN :41804550

23 Sep, 2025 6.80 Lacs

Sundergarh - Odisha

Tender For electrical wiring, supply and installation of electrical and electronic equipements for different weigh bridges of kulda ocp at basundhara area - wiring for circuit/ submain wiring alongwith earth wire with the 2 x 4 sq. mm + 1 x 4 sq. mm earth wire of frls pvc insulated copper conductor, single core cable in surface/ recessed steel conduitas required., copper cable lugs for 4 sq.mm, aluminium lugs for 35 sq. mm cable, supply , installation and commissioning of 5kva , 220/220v (p-n) air cooled isolation transformer in sheet steeled enclosure confirming ip-30 protection as per is-2147 including connection with 4.0 sqmm frls pvc insulated single copper conductor cable as required., supply and fixing of220v indicator light green & red, wiring for circuit/ submain wiring alongwith earth wire with the 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire of frls pvc insulated copper conductor, single core cable in surface/ recessed steel conduitas required., supplying and fixing 12 module (200mmx150nnm) modules, gi box alongwith modular base & cover plate for modular switches in recess etc. as required., providing and fixing 100 a,30ka,fpmccb rating and breaking capacity and pole mccb with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required., supply and fixing of surge proctor device (spd) 5ka,220v., supplying and fixing metal box of75 mm x 75 mm x 60 mm deep(nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required, supplying and fixing dp sheet steel enclosure on surface/ recess along with 25/32 a 240 v c curve dp mcb complete with connections, testing and commissioning etc. as required., supply and fixing of window speaker intercom system anti-interference dual-way intercommunication microphone and speaker ., total impact of gst plus labour cess [@ 1 % (bocw cess to be deducted from the ra bill as per the value of the work progress)] for the purpose of ctc

Central Government/Public Sector

CTN :41795558

18 Sep, 2025 99.5 Thousand

Siliguri - West Bengal

Tender For supplying and fixing of electrical fitments for newly constructed toilet of d coy barrack and new jamin toilet at stc bsf of north bengal electrical installation - wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface/ recessed medium class pvc conduit, with piano type switch, phenolic laminated sheet, suitable size m.s. box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc as required. group b, rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm. frls pvc insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. group b, wiring for circuit/ submain wiring along with earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire., wiring for circuit/ submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required.2 x 4 sq. mm + 1 x 4 sq. mm earth wire. 2 x 4 sq. mm + 1 x 4 sq. mm earth wire., supplying and fixing 3 pin 5 amps ceiling rose on the existing junction box/ wooden block including connection etc. as required. 3 pin 5 amp, supplying and fixing metal box of 180mm x 100mm x 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required. size : 180mm x 100mm x 60mm deep., supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/isolator). 8 way , double door., supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, "c"curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. single pole., supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, "c"curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required.single pole and neutralsingle pole and neutral., earthing with g.i. earth pipe of following size including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 4.5 metre long, 40 mm dia ., supplying and laying following size g.i. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with gi thimble etc. as required.6 swg., supplying and fixing cable route marker with 10 cm x 10 cm x 5 mm thick g.i. plate with inscription there on, bolted /welded to 35 mm x 35 mm x 6 mm angle iron, 60 cm long and fixing the same in ground as required. standard make., add applicable rate of gst @18% in place of 12% (0.0633mf) on dsr item. s no.(1 to 12), add 1% labour cess on s no. (1 to 12) + s no.13, modified estimate cost after using correction factor on account of gst @ 0.973 on dsr items s no. (1 to 12) + s no.13 + s no.14, supplying and fixing 3 mm thick phenolic laminated sheet cover in front of ms switch box including making hole and al. alloy/ cadmium plated iron screws, 20 mm, washers etc. as required.hylem/formica/anchor/as approved by engg incharge., supplying and fixing of 6 watt surface type trim cosmo panel square shape led light suitable for 240 volt, single phase, 50

State Government

CTN :41809454

19 Sep, 2025 8.19 Lacs

Delhi - Delhi

Tender For supply and replacement of internal and external electrical installation at conference room, badminton room and other location in siri fort sports complex. - wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the pointwith 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. (i/c rebate of replaced item).a) group c (dsr-2022,1.10.3), wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm frls pvc insulated copper conductor single core cable in surface/ recessed pvc conduit, and earthing the point with 1.5 sq. mm f copper conductor single core cable etc. as required. (i/c rebate of replaced items)a) group c (dsr2022, 1.55.3), wiring for light/ power plug with 2x4 sq. mm frls pvc insulated copper conductor single core cable in surface/ recessed meduim class pvc conduit alongwith 1 no. 4 sq. mm frls pvc insulated copper conductor single core cable for loop earthing (i/c rebate of replaced items) as required. (dsr-2022,1.12), wiring for light/ power plug with 4x4 sq. mm frls pvc insulated copper conductor single core cable in surface/ recessed medium class pvc conduit alongwith 2 nos. 4 sq. mm frls pvc insulated copper conductor single core cable for loop earthing as required. (i/c rebate of replaced items)(dsr-2022,1.13), wiring for circuit/ submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, singlecore cable in surface/ recessed medium class pvc conduit as required. (i/c rebate of replaced items)a) 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire (dsr-2022,1.14.1), b) 4 x 16 sq. mm + 2 x 6 sq. mm earth wire (dsr-2022,1.14.11), supplying and drawing following pair 0.5 mm dia frls pvc insulated annealed copper conductor, unarmored telephonecable in the existing surface/ recessed steel/ pvc conduit as required. (i/c rebate of replaced item). 1 pair (dsr-2022,1.18), supplying and fixing following size. modules. gi box along with modular base cover plate for modualr switches in recess etc. as reqd.(i/c rebate of replaced items) (a) 1 or 2 module (75mm x 75mm) (dsr-2022,1.27), supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (i/c rebate of replaced items)a) telephone socket outlet (dsr-2022,1.24.6), supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. (i/c rebate ofreplaced items) (dsr-2022,1.25), supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing andfixing 3 pin 5/6 a modular socket outlet and 5/6 a modular switch, connections etc. as required. (i/c rebate of replaced items) (dsr2022,1.31), supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing andfixing 6 pin 5/6 & 15/16 a modular socket outlet and 15/16 a modular switch, connections etc. as required. (i/c rebate of replaceditems) (dsr-2022,1.32), supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/isolator) (i/c rebate of replaced items) (dsr_2022)a) 4 way (4 + 12), double door, b) 6 way (4 + 18), double door, c) 8 way (4 + 24), double door, supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, "c" curve, miniature circuit breaker suitable for inductive load of following poles in the ex

Central Government/Public Sector

CTN :41797105

03 Oct, 2025 7.53 Lacs

Raipur - Chhattisgarh

Tender For supply of chemical s glassware and labware e e - diisopropylamine sigma- 471224 - 100 ml , 2- methoxy ethanol sigma - 284467 - 100 ml , dextran from leuconostoc spp. sigma - 31388 - 25g , indium tin oxide coated glass side -ito sigma- 636908-10pak , neoprene dry-box gloves z170062-1pak , aluminum oxide sigma- 229423-25g , lithium nitrate sigma- 229741-25g , nickel nitrate sigma- 72252-50g , citric acid monohydrate sigma- c1909-500g , phosphate buffered saline sigma - p4417 -50 tab , polyethylene glycol 400 for synthesis 00259 00500 , acetic acid sigma - 695092 -500 ml , sodium acetate sigma - 241245 -100g , sodium hydroxide sigma - 10649800500 - 100g , ethanol ar 99.9 percent loba - 2.5 ltr , bismuth - iii nitrate pentahydrate sigma- 467839 - 50g , aluminumisopropoxide sigma- 220418 - 100g , hydrochloric acid 35.4 percent ar loba -2.5 ltr , teflon lined ss hydrothermal reactor 100 ml , 2-propanol sigma- 190764- 1l , azo ar grade spin coating ink 25ml , ptfe syringe filter 0.2 micrometer , hydriodic acid -hi 57 percent ar 250ml , hbr acid 48 percent extra pure 500ml , cscl 99.999 percent trace metals basis 10g , pbbr2 ar grade 10g , titanium isopropoxide ar grade, 99.99 percent 25ml , titanium isopropoxide srl, 99 percent 500ml , methanol 99.5 percent extra pure 1l , 5ml syringe , nickel nitrate hexahydrate ar grade 20g , l-ascorbic acid 99 percent pure 500g , ethylene glycol 99 percent pure 500ml , rhodamine 95 percent powder 100ml , methylene blue dye content - 82 percent 25g , malachite green solution 100ml , mgcl2 acs reagent 100g , na2s2o3.5h2o acs reagent 25g , teo2 99.9 percent trace metal basis 10g , na2seo3 acs reagent 5g , naoh ar grade 98 percent 500g , zinc acetate ar grade 99 percent 250g , sncl2.2h2o ar grade 99 percent 100g , tx-100 laboratory grade 100ml , 2- methoxyethanol 99.8 percent pure 500ml , kapton tape 12 mm , kapton tape 25 mm , na2so4-238597 ar grade 500g , beaker 100 ml highly thermally stable , beaker 250ml highly thermally stable , beaker 500ml highly thermally stable , vial 10ml highly thermally stable , silver nitrate 209139 - 99 percent pure 25gm , indium tin oxide - coated glass slide size - 25 mm x 25 mm x 1.1 mm surface resistivity - 30-60 ohm per sq - 10 pkg , silver nitrate purity greater than 99 percent, form -powder - 25gm , gallium - iii nitrate hydrate purity greater than 99 percent, form - powder - 25gm , hydrofluoric acid acs reagent, 48 percent - 500ml , pedot - pss poly 3,4- ethylenedioxythiophene - polystyrene sulfonate ar grade - 25gm , polymethyl methacrylate - pmma - purity greater than 99 percent - 25gm , n- dodecyl mercapton -ddt - purity greater than 99 percent - 500ml , thioacetamide purity greater than 99 percent - 100gm , cobalt chloride hexahydrate purity greater than 99 percent - 25gm , tetracycline purity greater than 99 percent - 5gm , pfoa - perfluorooctanoic acid purity greater than 99 percent - 5gm , atrazine purity greater than 99 percent - 5gm , glyphosate purity greater than 99 percent - 5gm , selenium metal powder oxford ar, 99.99 percent - 100gm , ammonium molybdate tetrahydrate acs reagent, 99.98 percent trace metal basis - 50gm , nickel acetate tetrahydrate 98 plus percent - 100gm , ascorbic acid bioxtra, greater than99.0 percent crystalline - 25gm , aquivion - 802557-25 ml borosilicate glass, 25 ml capacity , sample glass vials borosilicate glass, 25 ml capacity , ti3alc2 max phase powder 50gm , hf2pbc max phase powder 25gm , zr2alc max phase //bid details 2 / 47 powder 25gm , ti2alc max phase powder 25gm , lif 50g , tmaoh 250 ml

Central Government/Public Sector

CTN :41810845

03 Oct, 2025 NA

Srinagar - Jammu And Kashmir

Tender For supply of non-medical items for supplies to srinagar - list of products, apron (doctor coat) size m, apron (doctor coat) size l, apron (doctor coat) size xl, apron (doctor coat) size xxl, air (pressure medical) mattress, broom 18inch, plastic bucket without lid 25lts, glass & multi surface cleaner liquid spray 500ml bottle, office chair nonrotatable leather material, cells (aa), cells (aaa), crib (baby warmer) mattress, digital led clock with temperature display, digital thermometer, detergent powder per kg, duster cloth (24*48 inch)2feet * 4feet, exhaust fan 5.7d *13w * 12.6h centimetres, fly/mosquito catcher medium electric trap 27*7*38 cm, mosquito & fly killer spray, bathroom cleaner 1l pack, toilet cleaner 1l pack, liquid hand wash soap, white phenyl 5 lts, lock 60mm, 8 brass lever, spo2 probes and leads for monitor (massimo), plastic mugs 2lts for water, soap 75g, steel wool (scotch brite stainless steel scrubber), skin temperatureprobes, toilet brush hockey type, vein finder paediatric torch type led, wiper 4feet length, wall fan, a4 paper rim 100 page, calculator, antivirus, cartridge 77a, cartridge 88a, cartridge 110a, cartridge 12a, cartridge 137a, correction pen, carbon paper100 page, file covers with spring file folder for documents, glue stick, highlighter pen, marker, note pad 50 pages, paper pin, plain register 100 page, push pin (hole puncher), pen drive 16gb, pens blue, pens red, pens black, pens green, file covers (cobra 2 pin type), stapler pins for medium size stapler, stapler medium size, disposable moline sheets 60cm*90cm, office table 3feet *5feet, room freshener, slippers, rubber macintosh, mattress cover plastic, crib mattress, wire 1.5 mm, wire 2.5 mm, wire 4 mm, wire 6 mm, s.s combine box type, top 6 amp, top 16 amp, socket 6 amp, flish type socket 15 amp, steel grip tape, l.e.d 4 feet tebo lights, modler type fan dimmer, floor cleaner, soda ash, vaseline, doormats, dustbin (small size), gyser (50 l), wall hangers, water purifier, stop watch timer (lab), wooden slide box (lab), test tube racks (lab), incubator filters, nichrome loop straight, nichrome loop circular, ibm spss statistics software, ups 10 kva, minimum 30 minutes

State Government

CTN :41781737

24 Sep, 2025 1.17 Crore

Belgaum - Karnataka

Tender For tender for procurement of equipment for establishment of aicte idea lab at dept. of mechanical engineering vtu pg centre belagavi - spray paint gun set, high end computer, printing material extrude 3d, iot devices, ultrasonic probe sanicator with generator, anvil 20 kg, bench vices, baby vice 60 mm, ratchet clamp 8 inches /200mm, c-clamp, punch set, circlip bent, planer, random orbit, straight grinder, angle grinder, m.s storage office almirah, slotted angle rack, oscilloscope 50mhz, 2 channel dso, clothes iron, wire terminal crimping tool, gypsum 10kg, glass cutter, reflow oven, filament dehydrator, solder wick, dc regulated power supply, flashlights, fish tape, wire stripper, non-contact voltage tester, tongue and groove pliers, allen set wrench, air compressor, hot glue gun, micrometer, hot air gun, vaccum cleaner, cutting mats, screwdriver set, centrifugal blower, tin cutter with spring, hot air blower with soldering iron, ball bearings, dc geared motors, scanning turntable 3d, extension board 16 amp, premium terracotta clay natural filtered shadu mati for modeling art & craft, marking tools, rivet punch with dies, rivets, laser 3 x line, laser distance meter measurement range 0.15 to 40 m, router set, ratchet set, impact drill, handheld power router, cordless rotary tool, spirit level, digital vernier caliper, stainless steel rule, tri square 8inch, power return measuring tape, moto saw, tool wall covering perforator, scroll saw machine, belt and disc sanding machine, open ended spanner set 12 piece, ring spanner set 12pcs, multi tool kit, allen key set, rubber mallet, nylon mallet, steel shaft claw hammer, ball peen hammer, mini hack saw frame, pipe vice, needle files, file handles, files set, power circular saw, jigsaw machines, cordless drilling machine, pcb power drilling machine, manual pcb drilling machine, pliers set, micro chisel set, hacksaw (12inch frame ), batteries 9v, lan cable 5 meter, battery 9v snaps, hack saw blades 12 inch, hack saw blades 6 inch, glue sticks, radium cutter knives, usb cables and arduino board with cable, transistors npn, zener diode 7.5v/1/2 watt, diode (1n4007), capacitor 33uf, capacitor 0.047uf, capacitor 2.2uf, capacitor 0.02uf, capacitor 100pf, capacitor 0.22uf, capacitor 0.47uf, capacitor 100mfd, electronic active and passive components resistor each 10, carpentary boring bits 1 kit boring wood flat drill bit set 6 pcs, drill bits 12mm multipurpose, drill bits 10mm multipurpose, drill bits 8mm multipurpose, drill bits 6mm wood, drill bits 5mm wood, drill bits 4mm wood, drill bits 3mm wood, pcb drill bits 1.0 mm, pcb drill bits 0.8 mm, pcb drill bits 0.5 mm, aluminum channels 2each strip, aluminum channels 2each box, aluminum channels 2each c, aluminum channels 2each l, pvc pipes 3inch, length 10ft, pvc pipes 2.5inch, length 10ft, pvc pipes 1.5inch, length 10ft, pvc pipes 1.0 inch length 10ft, pvc pipes 0.75 inch length 10ft, two way tapes, adhesives fevicol wudfill 50 gm, adhesives fevibond 40ml glue, adhesives feviquick 20ml, adhesives m-seal 1kg, nails 3 inch, nails 2 inch, nails 1 inch, studs 8mm, length 1m, studs 6mm, length 1m, washers 12 mm, washers 10 mm, washers 8 mm, washers 6 mm, washers 5 mm, washers 4 mm, washers 3 mm, screws 2 inch, screws 1.5 inch, screws 1 inch, bolts 12 mm, bolts 10 mm, bolts 8 mm, bolts 6 mm, bolts 5 mm, bolts 4 mm, bolts 3 mm, hex. 12 mm nuts, hex. 10 mm nuts, hex. 8 mm nuts, hex. 6 mm nuts, hex. 5 mm nuts, hex. 4 mm nuts, hex. 3 mm nuts, nylon rods 25 mm length 1m, nylon rods 18 mm length 1m, nylon rods 5 mm length 1m, nylon rods 2 mm length 1m, ply boards 18 mm, ply boards 12 mm, ply boards 8 mm, foam sheets, arcylic sheets, printer filament 3d, electric component repository each 3 sets, digital multi meter, first aid box, fire extinguisher, hot air gun with consumables, vacuum cleaner, quad copter assembly kit, granite surface plate(630x630x25mm grade o, electric bicycle motor and accessories, gpio module wi-fi controlled relay 8 channel, g

Carbon Electrode Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors