Latest carbon shaft Tenders | Government carbon shaft Tenders

Central Government/Public Sector

CTN :45136262

06 Jun, 2026 47.43 Lacs

Dapodi - Maharashtra

Tender For corrigendum : 8692 special repair to vertical shaft toilet block of both side building no p-89 of 450 personnel line at south campus of afmc under ge (central) pune

State Government

CTN :45313570

09 Jun, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - s/i/t/c of new 80 hp vt pump set, supplying,installation,testing and commissioning of vt pumpset (confirming to is1710:2021 standards) with 35 ft suitable size ms column pipe assembly in random length of 5 ft.(make-jyoti/wpil/kirloskar) with ss/bronze impeller capable to discharge 216 m3/h against a total head of 68m coupled with vertical solid shaft tefc ie3,ip55 type squirrel cage induction motor (make-siemens/crompton/abb) operating on 3 phase 50 hz,415v+- 10% supply and having speed 1400-1500 rpm (bhp of motor should be 10% more than that of pumpset including cost pof supplying,fitting and fixing of all required accessories, repairing of 80 hp vt pump set at raw water, supplying all labour tools and tackles for taking out the 40hp vt pump set with bowl assembly, column pipe and line shaft etc., cost towards dismantling of complete bowl assembly., cost towards repairing and fitting the parts of vt pumpset as per requirement (works as complete overhauling of the pump) such as:-1.machining/lathe work 2.changing ss top shaft,line shaft(2 nos of 5 feet) of and bottom shaft2.repairing of bowl assembly and impleller3.supplying and fitting c.l spider bearing with rubber cut less bush-4nos4.supplying and fitting of worn-out nut-bolts,bolt-nut washer,gland body bush machining,other machining works,etc as per requirement, complete assembling the pump set and lowering including supplying all petty materials., cost for supplying and installation of required accesories for repair and maintenance of motor control panel such as:-150 amp contactor-2 no (for 1 no starter)160 amp,breaking capacity -36ka mccb 1 no56-90 a electronic overload relay-2 nostimer-2 nosvolt meter 1 nosamp motor 1 nospilot lamp 6 nosselector switch 4 nossingle phase preventer 2 nos[ all accessories of reputed make]with complete internal wiring with suitable size of copper wire and testing on load., repairing of 30hp c/f pump sets at clear water, cost for dismantling of 30 hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb - 50 amp,25ka,3pole-2 nos (for motor backup protection),mccb -100 amp,50ka,3pole-1 no (main mccb)2.overload relay 26-40 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required, repairing of 15hp c/f pump sets at clear water, cost for dismantling of 15hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb -25 amp,15ka,3pole-2 nos (for motor backup protection),mccb -50 amp,25ka,3pole-1 no (main mccb)2.overload relay 20-25 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required

CTN :45068641

03 Jun, 2026 25.42 Lacs

Guna - Madhya Pradesh

Tender For repairing of raw water vertical turbine pump bowl assembaly and spares under ww np guna - :supply of spares for raw water turbine pump ke boul asembly pamp spares under ww np guna, raw water vertical turbine pump ki bowel assembaly nikalna, raw water vertical turbine pump ki bowel assembaly ko repair kar lagana, turbain pump lifting and lowering work 177 hp, replace bush bearing, replace pump ki shaft, replace neck ring, empeller badelna, adjust nut, vhs motor, hax nut bolt h/d, water deflaculater, gland, hex cap screw h/d, lantern ring, packing, packing box bearing, packing box, head shaft with key, discharge head, sole plate, foundation bolts, hax cap screw h/d, top colum pipe, inter line shaft (120lg), inter collum pipe, line shaft coupling, line shaft bearing, bearing retainer, line shaft sleaves, bottam line shaft, pump shaft coupling, bottam collum pipe, pump shaft coupling, bearing for dcase, discharge case, bearing for bowl, bowl, thrust ring, thrust ring retainer, impeller key, impaller, seal ring, bearing for s,bell, suction bell, pipe plug, basket retainer, line shaft (10 ft. long), turbine pump housing 177 hp, turbine gun matel 177 hp, reached + puli+charre 177 hp, l. n. key

State Government

CTN :44977863

08 May, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - s/i/t/c of new 80 hp vt pump set, supplying,installation,testing and commissioning of vt pumpset (confirming to is1710:2021 standards) with 35 ft suitable size ms column pipe assembly in random length of 5 ft.(make-jyoti/wpil/kirloskar) with ss/bronze impeller capable to discharge 216 m3/h against a total head of 68m coupled with vertical solid shaft tefc ie3,ip55 type squirrel cage induction motor (make-siemens/crompton/abb) operating on 3 phase 50 hz,415v+- 10% supply and having speed 1400-1500 rpm (bhp of motor should be 10% more than that of pumpset including cost pof supplying,fitting and fixing of all required accessories, repairing of 80 hp vt pump set at raw water, supplying all labour tools and tackles for taking out the 40hp vt pump set with bowl assembly, column pipe and line shaft etc., cost towards dismantling of complete bowl assembly., cost towards repairing and fitting the parts of vt pumpset as per requirement (works as complete overhauling of the pump) such as:-1.machining/lathe work 2.changing ss top shaft,line shaft(2 nos of 5 feet) of and bottom shaft2.repairing of bowl assembly and impleller3.supplying and fitting c.l spider bearing with rubber cut less bush-4nos4.supplying and fitting of worn-out nut-bolts,bolt-nut washer,gland body bush machining,other machining works,etc as per requirement, complete assembling the pump set and lowering including supplying all petty materials., cost for supplying and installation of required accesories for repair and maintenance of motor control panel such as:-150 amp contactor-2 no (for 1 no starter)160 amp,breaking capacity -36ka mccb 1 no56-90 a electronic overload relay-2 nostimer-2 nosvolt meter 1 nosamp motor 1 nospilot lamp 6 nosselector switch 4 nossingle phase preventer 2 nos[ all accessories of reputed make]with complete internal wiring with suitable size of copper wire and testing on load., repairing of 30hp c/f pump sets at clear water, cost for dismantling of 30 hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb - 50 amp,25ka,3pole-2 nos (for motor backup protection),mccb -100 amp,50ka,3pole-1 no (main mccb)2.overload relay 26-40 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required, repairing of 15hp c/f pump sets at clear water, cost for dismantling of 15hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb -25 amp,15ka,3pole-2 nos (for motor backup protection),mccb -50 amp,25ka,3pole-1 no (main mccb)2.overload relay 20-25 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required

State Government

CTN :44897963

22 Apr, 2026 7.05 Lacs

Delhi - Delhi

Tender For major overhauling of tata-320 dragline no. t-3539 including overhauling of half engine, fi pump, repair of vertical swing shaft, fair lead assembly, lining and denting painting of machine at site.

CTN :44380534

28 Mar, 2026 NA

Meerut - Uttar Pradesh

Tender For expression of interest for procurement of spares of hrv av-15 crane - oil seal 48x65x12, pin fastening strip, metal hose clip, oil seal 60x90x13, stn 029401.0, doubled links chain 08b-2, oil sealing 80x110x13, stn 02 9401.1, screw m12x100, stn 021101.10, nut m8, stn 021401.55, screw m20x100, stn 021403.55, limit switch, packing, wedge flat upper window, wedge front window, left hand wedge front window, visor adjustable/adjustable screen, split pin 2x16, stn 021781.05, switching unit 101 000 011 001, motohours counter bg4037, relay box, cable, cable s51-s52, ring 25x21, jib lifting cyl (lh), cyl of jib telescope, control block (return valve controlled), relays cover case rzp 0.24a, fan d 80 od 500326, hose 25-35, transmission shaft, set of seals consisting of following 43 items, hinge 100mm, oil seal 35x56x12, bearing 6204, bearing 6206, carrier, pin fastening strip, ring 0100x5,csn 02 9281.2, screw m8x18, oil sealing 60x80x13, 3110 109954, bearing 6007 2 rs, eye screw, ring 20x24, stn 029310.2, wedge of drum, screw m12x45, stn 021103.55, screw m8x28, rope, hook (vc 500319), screw m10x354, stn 021101.25, compensating washer, metal hose clip, hose 722101010-630, pin 8x25x20, stn 22119503, packing ring 13x17, stn 029310.2, spring, filtering insert, screw m3x8, stn 21151.25, vku 330,4, flanged part of plug-in connect, flanged part of plug-in connect, screw m6x30, stn 021103.25, sight glass, pass valve, pressure hose, pressure hose, screw m6x25, wedge, mirror 390792000, swinging wiper d 60.24v, split pin 5x45, stn 021781.05, indication lamp green, push button switch 24v-10a od 500300, hollow rivet, diodes plate, tail light, foot actuate switch 02-9431-022, contactor km 50 d, rempo 84502 washer, cable, split pin 8x112, stn 021781.05, socket, resistance pressure sansor vsr-250, screw m12x60, jib lifting cyl (rh), screw m8x35, thermostate- od 500326, rubber hose, cover, carbon shaft, ring 25x2 , stn 029281.2, securing screw, securing ring, sealing ring 24x32x2, stn 029381.40, split pin 32x26, hose 722161010-650, clip 9, cable s8, ring (70x79)12x18, stn 02 9310.7 (1112239), inner lamella, screw m8x18, bearing 6202, screw m12x20, stn 021103.55, screw m10x20, stn 021183.25, washer 6.4, stn 021740.05, limit switch do 500339, outer lamella, inner lamella, spring, ring, 208-180-832, screw m6x16, stn 021143.55, screw m6x20, stn 021151.25, dog clutch, screw m4x6, split pin 6.3x50, stn 021781.05, trailer breaker valve, screw m10x35, stn 021103.55, pressure hose, metal hose clip 3, cable, one way valve dn6, screw m6x14, clearing element, flanged part of joint, flanged part of connection, packing, cable part of plug-in connection, baco cam switch, washer 5, stn 02 1702.05, rubber cap, screw m4x10, connecting head for control string, connecting head with catch, pressure hose, 153191, suction filter fs32av30p10n1, packing, pin 12x80x70, glass rear window, upper window packing, glass sheet upper window, front window gasket right, front window gasket left, glass sheet front window, screw m4x8, csn 021151.25, wiper arm, screw m8x40, screw m5x30, lock insert adjusted design, res pressure indicator, motohours counter, temp indicator, lamp, flanged part of plug-in joint sr32b12s3, flanged part of plug-in joint sr32b12g3, electro magnetic horn water light tu4-216-64-78, screw m4x10, fan heating, screw m5x8, reducing valve, screw bm 20x200, screw m6x25, circlip 100x3n, stn 02 2931, pin complete, body distribution block, hose 72206 1010650, cuff t20 sleeve 55x65x5, screw m8x25, sleeve 55x65, on 02 9269.9, simirit seal 118x137x10, cable s 20, cable lug 7610-01/35 stn 371364, axial piston engine, group distributer modified pv 7, group distributer modified pv6, fuse, ring 50x3, csn 02 9281.2, hose 722-16-1515-650, ring, back body box, spring, hydro motor pch 100/50/600 left, direct connection (xas20 m27x2), outer pin level, pin fork, cable lug 7600-03/6 stn 371341.12, protective cover, fork, water proof flasher, ring 1, ring o 22x2, screw m8x50, upper washer

Carbon Shaft Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government