Latest carbon steel line pipe Tenders | Government carbon steel line pipe Tenders

corporations/Associations/Others

CTN :45538900

30 Jun, 2026 NA

Karnal - Haryana

Tender For auction sale of broken iron pipes ,small iron trolley etc

Central Government/Public Sector

CTN :45531590

16 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap ms structure consisting of angle, girder, ms gate, filter tank, iron battery boxes, ms plates,tie bar fencing, loose tie bar, ms jali,ms water tank ,pipe structure, heavy blower,rail trolly wheel ,empty stater,crane structure ,shutter ms gate, empty rru and empty pannel structure,ms saria,gate boom,pipes,protective screen fob's and rob's and all type heavy structure similar items with or without undetchable ms ci and nf attachment intact. note - cutting allowed for easy loading only.note-while delivery if any other non-ferrous or non-similar items found in the lot will not be delivered. no pick and chose allowed.qty. on approx basis. as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot.

CTN :45530353

22 Jun, 2026 NA

Fatehpur-Up - Uttar Pradesh

Tender For supply of cast iron detachable joints for use with asbestos cement pressure pipes as per is 8794, is 12987 (q3)

CTN :45516488

15 Jun, 2026 NA

Gir Somnath - Gujarat

Tender For supply of 1. cement isi mark, 1 bag, 2. good quality sand and local sand, 12 tons or 1 tractor load, 3. stone/brick, 1 piece, 4. isi mark 20 mm, 1 kg, 5. iron scrap 40 mm, 1 ton, 6. notty wood (for door frame), 1 cubic meter, 7. office chair, plastic chair and table, 1 piece, 8. for water work, boring, fitting, sealing with 1 foot, 9. ied light pole or fitting with voltage proof, 1 piece, 10. 4 hp isi mark submersible pump and electric motor, 1 piece, 11. all types of pipes, pvc pipes, 1 meter, 12. 60 to 80 mm power blocks, 1 cubic meter, 13. water tank, isi mark plastic, 1 liter, 14. cement bench as per size, 1 piece, 15. white cement, 1 bag, 16. crushed stone and grit, 1 tractor load, 17. gutter line excavation and fitting, 1 meter, 18. well excavation, 1 piece, 19. water valve as per size, 1 piece, 20. dustbin small/large, 1 piece, 21. galvanized/cement sheet, 1 piece, 22. material for yajna mandap (flooring), 23. isi, electrical all materials, 24. labor for all works, 25. isi, computer set, 1 piece.

CTN :45516720

15 Jun, 2026 NA

Gir Somnath - Gujarat

Tender For supply of 1. cement isi mark, 1 bag, 2. good quality sand and local sand, 12 tons or 1 tractor load, 3. stone/brick, 1 piece, 4. isi mark 20 mm, 1 kg, 5. iron scrap 40 mm, 1 ton, 6. notty wood (for door frame), 1 cubic meter, 7. office chair, plastic chair and table, 1 piece, 8. for water work, boring, fitting, sealing with 1 foot, 9. ied light pole or fitting with voltage proof, 1 piece, 10. 4 hp isi mark submersible pump and electric motor, 1 piece, 11. all types of pipes, pvc pipes, 1 meter, 12. 60 to 80 mm power blocks, 1 cubic meter, 13. water tank, isi mark plastic, 1 liter, 14. cement bench as per size, 1 piece, 15. white cement, 1 bag, 16. crushed stone and grit, 1 tractor load, 17. gutter line excavation and fitting, 1 meter, 18. well excavation, 1 piece, 19. water valve as per size, 1 piece, 20. dustbin small/large, 1 piece, 21. galvanized/cement sheet, 1 piece, 22. material for yajna mandap (flooring), 23. isi, electrical all materials, 24. labor for all works, 25. isi, computer set, 1 piece.

CTN :45517078

15 Jun, 2026 NA

Gir Somnath - Gujarat

Tender For supply of 1. cement isi mark, 1 bag, 2. good quality sand and local sand, 12 tons or 1 tractor load, 3. stone/brick, 1 piece, 4. isi mark 20 mm, 1 kg, 5. iron scrap 40 mm, 1 ton, 6. notty wood (for door frame), 1 cubic meter, 7. office chair, plastic chair and table, 1 piece, 8. for water work, boring, fitting, sealing with 1 foot, 9. ied light pole or fitting with voltage proof, 1 piece, 10. 4 hp isi mark submersible pump and electric motor, 1 piece, 11. all types of pipes, pvc pipes, 1 meter, 12. 60 to 80 mm power blocks, 1 cubic meter, 13. water tank, isi mark plastic, 1 liter, 14. cement bench as per size, 1 piece, 15. white cement, 1 bag, 16. crushed stone and grit, 1 tractor load, 17. gutter line excavation and fitting, 1 meter, 18. well excavation, 1 piece, 19. water valve as per size, 1 piece, 20. dustbin small/large, 1 piece, 21. galvanized/cement sheet, 1 piece, 22. material for yajna mandap (flooring), 23. isi, electrical all materials, 24. labor for all works, 25. isi, computer set, 1 piece.

CTN :45513945

22 Jun, 2026 NA

Khatauli - Uttar Pradesh

Tender For supply of cast iron detachable joints for use with asbestos cement pressure pipes as per is 8794, is 12987 (q3)

State Government

CTN :45397974

18 Jun, 2026 80.77 Lacs

Kota - Rajasthan

Tender For corrigendum : work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all l

corporations/Associations/Others

CTN :45490050

16 Jun, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeterwidth- 700 milimeterheight 1800 milimetermaximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometerwarranty 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of leg press leg shaper complete in all respects having following specifications.a) all pipes should used in the equipments should be galvanised with 3mm thickness.b) multi colour powder coating with polyster paints should be used on all the equipments.c) the foot pedal on all the equipments should be of aluminium only.d) the seats should be made of high quality plastic with colour scheme in yellow or orange.e) the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730*450*1450mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-76*3mm steel pipe5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts.8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck9 anti theft cover is made by stainless steel/high quality plastic.10 thickness of bearing bracket is no less than8mm11 hazardous materials like coating agent, rubber are under national newest standard.functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars size/dimensionslength- 900 millimeterheight 800 millimetermaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the ver