Web Analytics Made Easy - StatCounter

Carbon Steel Pipe Scrap Tenders

Get complete information related to latest Carbon Steel Pipe Scrap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Carbon Steel Pipe Scrap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Carbon Steel Pipe Scrap Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :45400958 Due date: 09 Jun, 202609 Jun, 2026 NA
Tender For auction sale of depot ferrous scrap - scrap ms melting consisting, ms and gi nut bolt revet, signal lever, head stock assembly,rail screw, ms angle below 1 feet,draft gear,foot step,punji,end cover, screw coupling,buffer plunger,bridle bar,coupler yoke, and all type of signal melting,signal rod piece below 3 feet, screw rod,joggle fish plate,switch fittings,switches,slide chair bearing plate,gauge tie plate, stretcher bar,gilmet,air brake cylinder complete and loose,axle cover,knuckle,dv,cp top, and bottom, shackle,empty box iron,boxes,ms round,ms pipe ms bar,ms pully, coupler rod,lashing chain,signal lever,beater, buffer socket, phawrah,coupling shaft ,iron strips,d valve,empty rru and similar box,brake beam, shocker , truss bar, striker casting,ms jali,ms small angle, shocker crow bar,axle box housing,shackle, pu pad cover,pull and push rod,side bearer housing, hand brake wheel, equailising lever,sab part, lever, erc all type jack,brake beam, isolating cock ,drain cock,bp/fp angle cock,bend plate,wiper arm safety shoe,clamp bracket,operating handle flange,sand injactor body, band plate,all type of heavy melting category similar items with or without undetachable nf attachment .note-while delivery if any other non ferrous or non similar items found in the lot will not be delivered.qty.on approx basis. as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot.

Central Government/Public Sector

CTN :45400863 Due date: 09 Jun, 202609 Jun, 2026 NA
Tender For auction sale of others - disposal of ferrous scrap released materials (cast iron) such as: (1) scrap released brake block, qty=20000 kg. having local lot no. els/401/scrap lot/2025-26/14. location:-south side of old wheel turning pit at els/gmo.

corporations/Associations/Others

CTN :45378166 Due date: 09 Jun, 202609 Jun, 2026 NA
Tender For auction sale of air compressor,air compressor o/s (mix),air compressor o/s (two wheel mtd)),alluminium scrap,armature (copper & iron mix),bicycle o/s,binocular o/s,bty charger o/s,bty mt o/s (12v 100ah),bty mt o/s (12v 100ah) (big),bty mt o/s (12v 120 ah),bty mt o/s (12v 120ah),bty mt o/s (12v 130ah),bty mt o/s (12v 150ah),bty mt o/s (12v 180 ah),bty mt o/s (12v 180 ah) (small),bty mt o/s (12v 200 ah),bty mt o/s (12v 32ah, 12v 38ah, 12v 45ah) (mix),bty mt o/s (12v 60 ah),bty mt o/s (12v 75 ah),bty mt o/s (12v 75ah),bty mt o/s (12v 88 ah),bty mt o/s (12v 90 ah),bty mt o/s (12v 92 ah),bty mt o/s (nmst 1000)

corporations/Associations/Others

CTN :45378168 Due date: 09 Jun, 202609 Jun, 2026 NA
Tender For auction sale of gen set o/s (rusted) (3.68 kva),gen set o/s medium (10 kva),gen set o/s medium (11.2 kva),gen set o/s medium (15 kva),gen set o/s medium (5.6 kva),gen set o/s medium (7.5 kva),gen set o/s small (2.4 kva),gen set o/s small (2.5 kva),gen set o/s small (3.5 kva),gen set o/s small (3.68 kva pumping set),gen set o/s small (4 kva),gen set o/s small (5.6 kva) two wheel mtd,helmet o/s,iron scrap,iron scrap (mix),iron scrap (screw pickiet),machinary o/s,machinary o/s (iron and motor),machine o/s (brush cutter),machinery o/s,machinery o/s (electric eqpt)

Central Government/Public Sector

CTN :45374562 Due date: 05 Jun, 202605 Jun, 2026 NA
Tender For auction sale of depot ferrous scrap - scrap released ms scrap released from lcw and others consisting of corroded material, ms cutting ,wagon plate,electric pole, ms plate,pipes, rod, pipe racks, angle racks, doors, c.i block, c.i pots, tanks, drum, guard & driver seats, signalling items, signale pole, signal unit, boom, ladder, cms doors,wheel stands, tanks, blowers, trolly wheels, doors corroded plates, sheet, drums, pipes , corroded angle , channel, tank, ms fitting, panel board wire rod saria, signaling ms/gi items,blowers, parts of chimney, frames of angles & pipes, junction boxes, parts of machine without motors, released nut bolt rivet, all type of shock observers, all types & size of pipes, ms rakes, panel, small pieces of ms/cs, iron rod, side body and other wagon parts corroded misc.items of all type of ms/cs scrap of sorts and sizes and old used unserviceable., (except wta items,spring, rail). careful cutting allowed for easy loading. fdp 40 days.delivery should start from one end. mode of delivery by actual weight.

Central Government And Public Sector

CTN :45374517 Due date: 12 Jun, 202612 Jun, 2026 NA
Tender For auction sale of rolling stock - thirteen nos iron and steel scrap cutup parts of cond. wagons and two nos scrap stainless steel (irsm-44 body) cut up parts of cond. wagons to be sold without excluded fittings, 04 wheel sets with ctrb & 02 casnub bogies per wagon which are exist with wagon, excluded fittings as per letter no. mech/hq/003/007/4016 dt.12.11.18 and letter no. mech/hq/010/010/warranty.dated: 09.06.2020 casnub bogies and 04 wheel sets with ctrb per wagons which are exist with wagons to be handed over by purchaser to sse/c&w/bmy.

CTN :45374531 Due date: 09 Jun, 202609 Jun, 2026 NA
Tender For auction sale of rolling stock - lot no. divn/s-yd/35/05/26-27/bg/cond./8w/coaches. description - iron and steel scrap cutup parts of bg cond./8w/coaches with n.f attachment without contents if any. 1) special repair 056903 wgaccn 2)se 058106 wgaccn nb: [1]. (a) all coaches are to be sold without 08 nos. wheel sets complete alongwith roller bearing with bio tanks and other excluded fittings as per latest excluded fitting list no.m2/c-19/excluded fittings/coach/1271 dt.13.09.2018. (b) the coaches are to be sold without 02 nos. serviceable bogies against special repairl no: 01-01 ( bogie end-2) and special repairl 02-01 ( bogie end-1) (c) the coaches are to be sold with 02 nos. unserviceable bogies without excluded fittings. against special repairl no: 01-01 and 02-01. nb[2]: special condition for rolling stock- a) all excluded fittings including wheel sets and bogie, if any, are to be handed over by the purchaser at the specified location for which the purchaser have to arrange labour/tools/ equipment for loading of the excluded fittings from cutting site and then transport it to specified location by their own arrangement/vehicle. they have to unload and stack the excluded fittings by their own arrangement including labours and hand over the same to: - (i) sse 27-28 bogies, coil spring, screw coupling, buffer sets etc. (ii) sse-19,wheel sets. (iii) sse-30, dv, aux reservoir, cr, common pipe bracket,alu. water tank, bmbc, etc. (iv) sse-29 bio tank. (v) sse-51 battery, fan, alternator, etc. (vi) sse-55 (all ac items) to hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register ¿purchaser clear all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolley/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:-[3] 08 nos. wheel sets complete along with roller bearing, 02 nos seviceable complete bogies, bio tanks and other excluded fittings are to be handed over by the purchaser at specified location as advised by concerned sse. nb:[4] delivery will be given in numbers. nb: [5] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied ( railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys.

corporations/Associations/Others

CTN :45350844 Due date: 05 Jun, 202605 Jun, 2026 NA
Tender For auction sale of tyres,empty drums (plastic),flap & tubes,c-oil, straining oil, m-oil,radiator assembly,axel shaft,old spring leaf scrape,miscellanous , spare parts etc,copper brass,iron scrap,wheel hub

Central Government/Public Sector

CTN :45343075 Due date: 05 Jun, 202605 Jun, 2026 NA
Tender For auction sale of rolling stock - cond. icf coaches with iron, steel, wooden scrap and other non-ferrous. cr 93919 vpu 2. cr 93834 vpu 3. special repair 93832 vpu 4. cr 93915 vpu r/items: 1. wheel set with axel, axel box cover of all coaches=16 sets & complete 08 trolley with fittings. 2. dv of all coaches = 04 nos and bmbc of all coaches = 16 nos. 3. draw bar hook with screw coupling complete assembly = 08 nos. 4. buffer plunger = 16 nos, and buffer casing=16 nos of all coaches. 5. lot will be sold on number basis. remark: - 1. coaches are lying at roh sick line no.03 at cla cutting yard. 2. cutting allowed for easy loading. 3. purchasers are to see the coaches personally before bidding. no claim will be entertained after sale of lot. 4. r/items are to be handed over to sse/roh/c&w/ltt by the purchaser as per para 2.9 & 2.10 of jpo no. and letter no. m.688.s.43.c dt 18.08.2025. these shall be handed over at nominated place in roh depot. 5. railway track and premises to be cleared by the purchaser before compilation of delivery i.e. mud, muck, rexine, pvc sheet, wood, ply, plastic, foam, glass, rubber etc. 6. purchaser has to ensure the safety of railway assets, his labour and other staff at site. 7. purchaser will be fully responsible for any damage to railway property. 8. precaution should be taken while dismantling/cutting and loading of cut parts. 9. purchaser has to keep fire safety equipment/items i.e water, sand, fire extinguisher etc. at the cutting yard. location: roh sick line no.03 at cla cutting yard. stock holder:-sse/roh/c&w ltt.

Central Government/Public Sector

CTN :45343076 Due date: 05 Jun, 202605 Jun, 2026 NA
Tender For auction sale of rolling stock - cond. icf coaches with iron, steel, wooden scrap and other non-ferrous. cr 041122 wgaccw 2. cr 041263 wgaccn 3. cr 041317 wgaccn r/items: 1. wheel set with axel, axel box cover of all coaches = 12sets & complete 06 trolley with fittings. 2.dv of all coaches = 03 nos and bmbc of all coaches = 12 nos. 3. draw bar hook with screw coupling complete assembly = 06 nos. 4. buffer plunger = 12 nos, and buffer casing = 12 nos of all coaches. 5. alternator = 06 nos, motor pump = 05 nos and rru=03 nos. 6. lot will be sold on number basis. remark: - 1. coaches are lying at line no. ktc 04 at cla cutting yard. 2. cutting allowed for easy loading. 3. purchasers are to see the coaches personally before bidding. no claim will be entertained after sale of lot. 4. r/items are to be handed over to sse/roh/c&w/ltt by the purchaser as per para 2.9 & 2.10 of jpo no. and letter no. m.688.s.43.c dt 18.08.2025. these shall be handed over at nominated place in roh depot. 5. railway track and premises to be cleared by the purchaser before compilation of delivery i.e. mud, muck, rexine, pvc sheet, wood, ply, plastic, foam, glass, rubber etc. 6. purchaser has to ensure the safety of railway assets, his labour and other staff at site. 7. purchaser will be fully responsible for any damage to railway property. 8. precaution should be taken while dismantling/cutting and loading of cut parts. 9. purchaser has to keep fire safety equipment/items i.e water, sand, fire extinguisher etc. at the cutting yard.. location: line no. ktc 04 at cla cutting yard. stock holder:-sse/roh/c&w ltt.
 Loading, Please wait...

Connect us via What's Up