Get complete information related to latest Carbon Steel Sheet Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Carbon Steel Sheet Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Carbon Steel Sheet Tenders.
Tender For supply of material for the work of mw to conservation and repairs of the flooring, remains of the structures at shaniwarwada, dist-pune. as specified in the boq. - description of work, the sand should be and clean and free from dust, dirt and foreign matters. the dust of the sand should be less than as per the standard specification and sieved through 4.75 mm i.s sieve. the sand shall be brought from the river sand and uniform in the shape and well graded. the river sand consists of fine rounded grains. percentage deducted from volume of sand & not more than 5% of volume etc complete. as directed by work incharge., surkhi should be clean and free from dust, dirt and foreign matters. surkhi shall be made of well burnt bricks or brick bats (not over brunt) should be passes through 4.75mm sieve and retain on the 1mm sieve etc complete. etc. complete. as directed by work incharge., the lime shall be white fat lime and shall be freshly burnt and free from ashes and other foreign matters. the lime shall be screened through the sieve of 25mm. the remaining lime retain on the 25mm sieve rejected and not consider in the quantity etc. complete. as directed by work incharge. ( supplied as whenever required), supply of jiggery including of charges and stacking at work sire etc. complete. as directed by work incharge., supply of hirda including of charges and stacking at work sire etc. complete. as directed by work incharge., supply of gum including of charges and stacking at work sire etc. complete. as directed by work incharge., the brick jelly should be clean and free from dust, dirt and foreign matters. brick jelly shall be made of well burnt bricks or brick bats (not over burnt) should be as per i.s standard. etc complete. as directed by work incharge., water proof chemical etc complete. as directed by work incharge., the basalt stone size (600 x 450mm x width 300 to 550mm shall be hard, tough and durable of approved quarry as per the matching texture of the monument. the stones shall be chisel dressed on all sides to have perfectly square or rectangular faces so that they may be laid in perfectly horizontal and vertical joints. the stone and edges of face stones fine chisel hand dressed and rough surface etc. complete. etc complete. as directed by work incharge., supply of hard trap un-coursed rubble stone not less than 40 cm, stone obtained from approved quarry including supply site of work etc. complete. as directed by work incharge., supply of cement including of charges and stacking at work sire etc. complete. as directed by work incharge., hdpe pipe dia 90mm, hdpe 32mm pipe, gunney bag, adhisive chemical, provision for purchase of too and plants required for execution of work, pickaxe without handle, fawade spade without handle, pvc ghamela, halogen light 150 watt, wheeled barrow, bamboo of the 10 feet, wooden planks of size 6 x 8" x 1.5, coir string for construction work, sintex water tank 200 ltr, wooden ballies of 10 feet, hollow box, pointing tool trowel, pvc water tank 1000 liter, pvc pipe1", throwel (thapi), blade for cutting machine for stone of 4inch, right angle 24", wooden thapi (randa), level tube pipe of outer dia 10mm, hand gloves, helmet for construction site, safety shoes, safety belt, m.s. sheet tray 6 x 4, measuring tape 30mtr, measuring tape 5 mtr, spit level, gst 18% of sl.no.1 to 43
Tender For work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all lift, dewaterin
Tender For corrigendum : supply of miscellaneous and consumable items for mmd/ws at khep - v belt d-238, v belt a-28, v belt c-105, rubber spider for love joy coupling size l-095, ci love joy coupling size l-095, 100 percent neoprene rubber sheet size 1 mtrx2 mtrx3 mm thick, 100 percent neoprene rubber sheet size 1 mtrx2 mtrx5 mm thick, anabond unadrobic adhesive & sealand no-610, fevi kwik tube 3 grams, m seal fast curing epoxy compound, each packet contains 50 grams of resin base and 50 grams of hardener ( 1 kg box contains 10 packets), belzona super metal, measure tape 5 meter, britelite 1200 meters long rang torch rechargeable led flashlight with charger, impact wrench power/battery operated, bearing puller , 12 inch , 3 legs, bearing puller , 8 inch , 3 legs, hydraulic bearing puller kit, make- skf, model no- tmma 75h/set, width of grip external 52-200 mm, effective arm length - 200 mm, withdrawal force- 75 kn, grease gun, bench vice size 4", bench vice size 8" (netco make), long nose plier, insulated with thick c.a. sleeve,generally confirming to is 3552-1989, product no:1430-6., circlip plier internal (bent nose),product no: 1442.7,capacity :19.6 mm, length:180 mm, taparia or jhalani or any equivalent make, combination plier ,185mm lenth, hand drill machine size 10mm, grinding stone (smooth) for 6"(dia.) bench grinder wolf., grinding stone (rough) for 6" bench grinder wolf, mini angle grinder 100 mm, grinding disc (wheel) size 100x4x16 mm, mos 13750 high cut (a.36), ag-4 cutting wheel make:bosch, electrically operated portable cut off saw (for tube cutting), wheel size:355mm, arbour size: 25.4mm, scissors size: 10", wire brush with wooden handle size 50x150x300 mm, 3/4" polypropylene rope for normal mechanical work, manila rope, size: 16 mm dia, manila jute rope size 12 mm, ms nipple 1/2", nipple 3/4", nipple 1", ms nipple size 2", hss hacksaw blade size 300x12.5x0.63 mm, hss hacksaw blade size 12"x1/2"x24 tpi bipic, grits 150 emery cloth roll of 50mtr. length and 50mm width, emery paper smooth fine size 38 mm x 50 m length, portable welding machine, gas cutting torch cutogen esab make, two stage two gauge oxygen gas pressure regulator - model no : dura 0-10 - esab make, two stage two gauge acetylene gas pressure regulator model : dura a-1.5 - esab make, flash back arrestor for cutting torch end mounted oxygen, flash back arrestor for cutting torch end mounted da, flash back arrestor for regulator mounted da cylinder.
Tender For supply of fevistick , eraser , cd marker blue , cellotape 1 inch , cellotape 2 inch , uniball pen blue , uniball pen red , scissor big , scissor medium , clip folder , box folder synthetic type , paper cutter , double sided tape , post-it-pad plastic type , ball pen blue , ball pen black , ring folder synthetic type , register 6 qr rulled , register 4 qr rulled , fevicol tube 105 gm , l folder , file tag , brown sheet plastic coated , lamination sheet , fluorescent paper , photo paper , notice board ribbon , sharpener , post it sticky note , notice board pin , paper u clip , stick file a4 , stapler no 10 , pvc transparent roll , double punch dp 600 , whiteboard marker blue , whiteboard marker red , scale steel 12 inch , highlighter , feviquick
Tender For supply of photo copier paper 210 mm x 297 mm a4 , brown sheet laminated , paint roller 4 inch , paint roller 7 inch , clip jubilee 3 inch , paint roller 9 inch , paint roller 6 inch , paint brush 4 inch , paint brush 2 inch , spray hand liquid insecticide , turpentine oil solvent , thinner , solder lead , rubber latex long glows , biodegradable medium 14x16 inch , petroleum jelly , paint roller refil 9inch , paint roller refil 6inch , paint brush 3 inch , lint free baniyan cloth , cotton waste , brush sweeping hand , super spain mop refils , polish metal brass , duster cloth , feather broom phool jhadu , mutton cloth cotton , cloth sponge , cleaner white toilet harpic , broom country , cleaning liquid for utensils , hand towel , steel cleaning liquid , spin mop set , wiper long handle , cotton rags , cleaning bar for utensils 500 gms , brush with lonbg handle , scrubber with handle , abrasive cleaning pad scrubber pad , garbage bag , dust bin , detergent powder , deodriser refil for ship head 8 cm x 3 cm , soap liquid toilet , room freshner room spray , pest seal hit spray aerosol spray , hand wash liquid , glass cleaner , disinfectant fluid white or black phenol , grease lg 280 , trochcellv medium size , tube florescent led cfl , lamp cfl led , battery aa , corrosion inhibitor , varnish or touchwood * /bid number : gem/2026/b/7614442 + /dated: 04-06-2026 ' ' / bid document 1 / 41
Tender For supply of hand piece lubricant spray bott of 500 ml , box denture and appliance , slab glass mixing fig 1 size 15point2cm x 7point6cmx 2point2cm , desensitizing paste stannous fluoride potassium nitrate sodium mono fluro phosphate tube of 50 gm , denture polishing cake 200gm , polishing cup rubber mounted soft for rahp pkt of 12 , chlorhexidine mouth wash 0point12percent sugar and alcohol free bott of 160 ml , white acrylic stone for shp , sticky wax pkt of 12 sticks , wax sheet modeling base plate box of 226point8 gm