Latest cardon shaft Tenders | Government cardon shaft Tenders

Central Government/Public Sector

CTN :45420191

18 Jun, 2026 NA

Bokaro - Jharkhand

Tender For supply of cardon shaft assly for upcoiler

Co-operative

CTN :45415201

10 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For fabrication and erection -replacement of the 2" x 2" square bar rails installed on the cane unloader. removal of the old juice gutter from 'a' mill, fabrication and installation of a new one, and conducting a successful trial run. removal of the old m.s. juice tray from 'a' mill, and fabrication and installation of a new one using m.s. plates. fabrication and installation of a new gear guard in the 'a' mill house. welding of worn-out teeth on the mill pinion as required, followed by grinding to a smooth finish. repair of damaged/worn parts of the tail bar coupling by welding as required, followed by grinding. repair of damaged/worn parts of the tail bar by welding as required, followed by grinding. comprehensive repair of the d.s.m. screen: cutting out and removing corroded sections, fabricating and fitting new replacements, repairing all internal piping, and conducting a successful trial run. thorough cleaning of the cane carrier slats, along with their attached links, pins, rollers, and bushes; followed by greasing and refitting said components into the slats in their proper positions. thorough cleaning of the slats, links, pins, bushes, and rollers of the primary/secondary cane carrier chains; followed by greasing, assembling the chain components, and preparing the chain as per instructions. fabrication and installation of juice rings for the rollers. fabrication and installation of mill bearing guards using 3 mm plates. fabrication and installation of m.s. scrapers for the under-feed rollers. cutting of chevron grooves into old mill rollers as required. cutting of chevron grooves into new mill rollers as required. creating 'dots' on the top and feed rollers of the mill using arc-welding electrodes, as per instructions. [repair/replacement of] m.s. components for the worn-out teeth of the under-feed rollers. cutting out patches from a plate and installing them as new teeth. performing arc welding on the grooves of rollers used in the mills using electrodes, as per instructions. fabricating side juice guards for mill rollers from 3 mm plates, as per instructions. fabricating an under-feed roller for the mill in accordance with the provided drawings. dismantling a damaged or defective juice tank in the mill house; fabricating and installing a new tank in its place, and conducting a trial run. replacing or repairing the damaged sections of a defective juice tank in the mill house. dismantling and replacing the bottom plate of a damaged or defective juice tank in the mill house. cane carrier / bagasse carrier / bagasse elevator / cross bagasse carrier / r.b. c. removal of the cane carrier side plate and installation of a new plate. a. welding or forging the enlarged pin holes in the links of the cane carrier, bagasse carrier, etc., to match the specific pin size. a. removal of broken runners from the cane carrier, inter-carrier, bagasse elevator, return bagasse carrier, or cross bagasse carrier, and installation of new runners in their place. a. removal of old, damaged cane carrier slats and installation of new slats. a. the task of drilling holes in new slats for the cane carrier and inter-carrier. a. straightening and repairing cane carrier slats as required. a. repairing damaged and weakened hoods of the cane chopper, cutter, and fibrizer in accordance with instructions. a. removal of old, damaged cane carrier slats; straightening the damaged slats; cutting out the damaged sections; and repairing them by welding in new or salvaged slat pieces cut to size, thereby restoring the slats to their proper dimensions. a. welding the enlarged holes in the inter-carrier links and re-drilling them to the correct size to match the rivets. a. filling the enlarged holes in old inter-carrier slats by welding, and subsequently re-drilling them to create new holes in accordance with the engineering drawings. a. removal of the damaged band from the inter-carrier clutch shaft, fabricating and installing a new one, and conducting a satisfactory

Central Government And Public Sector

CTN :45430117

15 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of others - total approx. wt.-5 mt, sr. no(1) cylinder liner (mild steel), qty-50 nos, approx. wt.-2300 kg, sr. no.(2) cardon shaft (mild steel) qty-4 nos, approx. wt.-200 kg, sr. no.(3) spring (alloy steel), qty-2 nos, approx. wt.-50 kg, sr. no.(4) pipe 6 inch dia (mild steel), qty-13 nos, approx. wt.-650 kgs. sr. no.(5) hand made almirah, tin and other ng bg miscellaneous mix ferrous material, approx. wt.-1800kg

State Government

CTN :45402026

23 Jun, 2026 NA

Yamunanagar - Haryana

Tender For supply of coal mill feeder spares - vieweing mirror with whiper (as per sample) , belt tension roller moc: (en-8, forged alloy steel) (as per sample) , seal housing moc: carbon steel 1030 grade (as per sample , head pulley/driving pulley moc: carbon steel (as per sample) , take up pulley with eccentric bearing housing moc: carbon steel , support roller of r/c feeder moc: carbon steel; shaft material en-8 (as per sample) , take up shaft (moc: en8) as per sample ,, bearing housing of connecting plate of head cell of r/c feeder/ moc- aluminium (as per sample) , connecting bushing (with pin) 1 set =10 nos. moc: neoprine rubber with bronz bush (as per sample)

State Government

CTN :45317543

01 Jun, 2026 NA

Multi City - Telangana

Tender For tggenco-ytps-supply of gravimetric feeder spares for hp1103 bowl mill in boiler -ii division. - calibration roller complete assembly, bearing housing,inlet spanroller, bearing housing,weigh spanroller, bearing housing, calibration roller, grease sealfor belt takeup pulley for inlet, weigh span roller grease seal for inlet, grease seal for calibrating for inlet, tension roll grease seal for inlet, wear sleeve belt take up for inlet, tension roll wear sleeve for inlet, drag ling assembly for inlet, bolt for drag ling, bolt for belt takeup rail support for inlet, weigh span roller pre loading washer for inlet, bolt forweigh module, tension roll pivot bolt for inlet, bearing housing-ii for weigh span rollers, retainer ring for calio shaftfor inlet, weigh span roller retainini ring for inlet, tension roll retainer ring for inlet, inlet span roller retainer ring for inlet, weigh span roller hanger rod, ring,retaining, block belt takeup for inlet, belt takeup pulley assy shaft for inlet, inlet skirt (rh) for inlet, inlet skirt (lh), end skirt for inlet, levelling bar for inlet, head pulley wear sleeve, bulls eye glass for inlet, shear pin for coc shaft, coal on belt padoie for inlet, coal on belt grease seal for inlet, oil seal, 70x85x8 mm, counter weight,of weighsensing system

Central Government/Public Sector

CTN :45152580

01 Jun, 2026 NA

Hubli - Karnataka

Tender For camc of sparmv/ubl equipments (voith transmission, cardon shafts, axle drive gear with powered axle torque arm, control & instrumentation, skid mounting, etc.) for a period of three years.

corporations/Associations/Others

CTN :45219193

03 Jun, 2026 NA

Atthipattu Puthunagar - Tamil Nadu

Tender For procurement of spares for 36 inch gravimetric coal feeder of hp 1103 bowl mill - spares for 36" gravimetric coal feeder for hp 1103 bowl mill, coc drive assembly (without motor & gearbox), housing bearing for coc drive, coc drive key, shaft for coc take up, sprocket for coc take up, coc chain assembly, belt take up pulley, shaft for belt take up, housing belt take up, shaft screw for belt take up, bearing deep groove ball for belt take up, block for belt take up, belt scrapper assembly, drag link assembly - lh, drag link assembly rh, head pulley (without bearings & bearing blocks), casting cover for bearing, cap bearing, bushing head pulley, coupling drive stud, inlet support roller group, roller assembly weight span with cmmr (front end), weigh roller, roller assembly weight span (back end)

State Government

CTN :45205887

05 Jun, 2026 NA

Malda - West Bengal

Tender For replacement of damaged cardon shaft of horizantal split casing 55 kw pump (model no-scpv 300-490 ha) at sankaritolaghat intake pumping station within malda arsenic water supply scheme, dist malda under malda mechanical division phe dte.

CTN :45251187

03 Jun, 2026 NA

Kheri - Uttar Pradesh

Tender For providing of custom bid for services - under feed roller shaft from old mill roller shaft

Central Government/Public Sector

CTN :44932087

22 May, 2026 10.36 Lacs

Ganjam - Odisha

Tender For corrigendum : supply of drive shaft with self aligning bearing, sleeve & plummer block as per drg no. 10212 -19- srw-00-00 , compression spring type t24 (1 set of 8 nos) , universal coupling , cardon shaft nh 175 suitable

Cardon Shaft Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors