Latest carpentry item Tenders | Government carpentry item Tenders

Central Government/Public Sector

CTN :45702805

01 Jul, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no wc-07001fac/icf note : - 1 advance handing over of coaches for cutting may be allowed. 2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 16 mt approx.) s.b.lot no. bpl/crws/26-27/cond. coach/15/0068 restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

Central Government/Public Sector

CTN :45702806

01 Jul, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decoram, non-ferrous & restricted items will not be delivered) coach no 1-wc-910037 art/beml2-wc -920016 art/beml 3-wc-910036 art/rcf note : - advance handing over of coaches for cutting may be allowed. 2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 48 mt approx.) s.b.lot no. bpl/crws/26-27/ cond. coach/15/0069 restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc. note: delivery will be made on actual nos basis.

CTN :45697949

16 Jul, 2026 14.54 Lacs

Rupnagar - Punjab

Tender For tender for supply of procurement of public health/ carpentry items at iiser mohali - description of hema, desk 1/2" with cap, disk 3/4" with cap, ss pvc connection 18", ss pvc connection 60, ss multi jet spray for wc, single cyphone, cyphone with double bumon, single flow over head shower (square) (with, ss-health faucet continental complete set abs material with 1meter ss pipe, bottle trap for both wash basin & sink, flexible pvc waste pipe (1-36, hydrandic seat cover, wall hung toilet seats (with compset seaty cover, water tank ceramic brass screw 44 pcsshort bend ball cocksyphon ss rack bolt), sink waste coupling 4 11/4" (big), cp waste coupling 1 1/4" brass for urinal sink with full thread (small), angle ms cutting blade for hand grinder, screw driver 9 (2-in-1), screw driver 6 (2-in-1), 250man water pump pliers, rust resistant chrome (parrot player), pipe wrench 14", hexa blade (single side. ss.cutting), ball valve 3-4" (20), ball valve 1" (25mm)-, nozzle bib çock 1/2" (15mm)-small body half tum, bib cock 1/2" (15mm)-long body-half tum, angle valve 1/2" (15) hall turn, fillar cock marr for kruchen sink with pipe, pillar cock mixer for wash hasin, bend mixture, 3/4"x12" cp benl, nozzle hih cook (2-in-1), extension nipple cp 1/2" 11/2, extension nipple cp 12 x2, cil plug 1/2" (threaded, water meter 40mm (1 1/2") (flange type), water meter sum (2) (thmal type), cpvc union 1", cfvc unice 2, cpvc mta ix, cpvc mta 11/2", cpvc mta 2, cpvc fta 1/2", cpvc fta, cpvc fta 11/2, cpvc fta 2, cpvc else "s", cpvc 112 x 1 1/2, cpvc, cpvc els, cpvc 6" 16", cpvc clbo 34", cpvc socat 3/4", cpvc 4", cpvc bush 1434", cpvc bush 14, cpvc hall valve 1 1/2", cpvc hall valve 2", cpvc pipe 14", cpvc pipe 2, cpvc mta b 1 / (2') * 3/4", cpvc mta brass 27, cpvc cho fta 4 1/2"-, cpvc cho fta 34 3/4"-basss, pvc elbo bend 2", pvc elho hend 4", pvc elho hend 6", pvc tee 4, tpvc tee, pvc flash handie, pvc hall cock of long md with pvc hall

CTN :45646934

07 Jul, 2026 2.25 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground -development of jai hind stadium in njarackal grama panchayath in vypin lac, ernakulam district-supply and installation of open gym equipment - outdoor gym equipments, od268048/2025-2026 chest press (double) - supply and installation of double chest press having the following specifications: dimensions: (l x w x h) 1955 x 710 x 1900 mm. main center pipe - ø 114 mm od “b” class gi pipe. foundation plate –m.s. round plate of ø 250mm & 8 mm thick. foundations cover capdome shape of pp / nylon / hdpe material. remaining frame -made up of ø 48 mm od “b” class g.i. pipe. handle - made up of ø48mm od “b” class g.i. pipe. link - made up of ø 48 mm od “b” class g.i. pipe. seat & back rest – 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 in-sert wall thickness 3 to 4 mm. bearing bush closing cap’s– pp / nylon / hdpe material. handle must be connected with frame by 8 mm laser cutting ms profile. top closing cap – dome shape made by pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe.height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brands. pin – made up of ø 25 mm m.s. bright bar pin. bearing bushes - ø 60 mm od seamless pipe. grips - high quality rubber ø 46 mm od. circlips–a 24 circlips are used for assembly. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od268050/2025-2026 air walker - supply and installation of air walker having the following specifications: dimensions: (l x w x h) 1190 x 380 x 1244 mm. main frame- ø 88 mm od ?b? class gi pipe dually bending design. foundation plate?m.s. round plate of ø 250 mm & 8 mm thick. paddle? ø 42 mm od round gi pipe. handle ? ø 33 mm od ?b? class gi pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s. plate of 2 mm thick use to support it. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s -pp / nylon / hdpe material. bracket - 8 mm thick laser profile is use to support paddle frame. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe.height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brands. pin?s ? ø 25mm m.s. bright bar pin. circlips? a 24 circlips are used for assembly. bearing bushes -ø 60 mm od seamless pipe. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od268054/2025-2026 rower - supply and installation of rower having the following specifications: dimensions: (l x w x h) = 1472 x 915 x 1040 mm. upper and bottom pipes - 88 mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. handle - 33 mm od b class g.i pipe. angle between handle and horizontal surface is 75 - 80 degree. linkages 48 mm od b class g.i. pipe.seat & back rest 380 x 275 x 60mm thick high-density polyethylene (hdpe) blow molded with m10 in-sert wall thickness 3 to 4 mm. foot resting pipe - 60 mm od b class g.i. pipe. e

Central Government/Public Sector

CTN :45646058

02 Jul, 2026 NA

Medak-T - Telangana

Tender For carpentry items - ply wood 12mm thick 12x1220x2140mm, ply wood 6mm thick 6x1220x1830mm, flush door single leaf- 30x980x1940 mm, flush door sl 30x780x1940 mm, flush door single leaf size 678x1940x30, teak wood door frame 1.1x2 meters, teak wood door frame 0.8x2 meters without sill, teak wood door frame 0.7x2 meters without sill

CTN :45533008

20 Jun, 2026 4.60 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground - development of vankulathuvayal stadium in azhikode grama panchayath in azhikode lac, kannur -supply and installation of outdoor gym equipment - retender - open gym equipment, od405580/2025-2026 horse rider - supply and installation of horse rider having the following specifications: dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - 114 mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundation cover cap - dome shape of pp / nylon / hdpe material. remaining frame is made by 48 mm od b class gi pipe. seat frame is made by 48 mm od b class gi pipe. seat position must be horizontal to 110 -120 degree. link- made up of 48 mm od b class g.i. pipe. angle between link and ground position is 10-20 degree. handle - 33 mm od b class gi pipe. paddle vertical support - 60 mm od b class gi pipe. handle frame- 42 mm od b class gi pipe dually bending design. foot pipe - 33 mm od b class gi pipe. support frame 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe. bearing bush closing cap pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand. bearing bushes - 60mm od seamless pipe. pin made of 25 mm m.s. bright bar. grips - high quality rubber 46 mm od. circlips a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start &finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405586/2025-2026 leg press (double) - specifications: dimensions: (l x w x h) = 1676 x 400 x1500 mm. main frame - 114 mm od ?b? class gi pipe. foundation plate m.s. round plate of 250 mm &8 mm thick. foundations cover cap - dome shape of pp / nylon / hdpe material. link - is 60 mm od b? class gi pipe. seat frame - 42 mm od b class gi pipe. leg press back rest should be angled in 120 -130 degree. footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 2 mm thick use to support it. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. link connected with frame by 8 mm thick laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s- pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brand. pin 25 mm m.s. bright bar pin. bearing bushes - 60 mm od seamless pipe. circlip? a 24 circlips are used for assembly. coating - best quality of powder coating 80 -120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405583/2025-2026 back extension - supply and installation of back extension having the following specifications: dimensions: (l x w x h) 1060 x 730 x 990 mm. main frame - made from 88 mm od b class g.i. pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. leg support - 42 mm

Central Government/Public Sector

CTN :45430687

16 Jun, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1-wc-081581/ accnh /rcf 2-wc -081405 accnh/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 32 mt approx.) s.b. lot no. bpl/ crws/26-27/cond. coach/12/0048. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

Central Government/Public Sector

CTN :45430688

16 Jun, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1-wc-081432/ accnh /rcf 2-wc -081390 accnh/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 32 mt approx.) s.b. lot no. bpl/ crws/26-27/cond. coach/12/0049. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

Central Government/Public Sector

CTN :45430689

16 Jun, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1-wc-081505/ accnh /rcf 2-wc -081431 accnh/rcf 3-wc -081327 accnh/rcfnote : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 48 mt approx.) s.b. lot no. bpl/ crws/26-27/cond. coach/12/0050. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

State Government

CTN :45361243

31 May, 2026 NA

Jaipur - Rajasthan

Tender For supply of carpentry items for modification of peb-150 into girls hostel supply of 19 mm block board , with dim. 8 x 4 feet - 2 pics , make - sanik by century , supply of 6 mm ply board , with dim. 8 x 4 feet - 33 pics , make - sanik by century , supply of 8 mm ply board , with dim. 6 x 4 feet - 12 pics , make - sanik by century , supply of steel l - patti , l - 3 inch both sides, as sample approval , self drilling screw, length 1 inch, with washer - ramson - 500 units in 1 pack , self drilling screw, length 1.5 inch, with washer - ramson - 500 units in 1 pack , supply of silicone sealant clear (make - dr. fixit fevi seal) anti fungi acetic cure silicon sealant) , supply of steel butt door hinge width 1.5 inch by 3 inch height, as sample approval , supply of aldrop - l 10 inch - ramson , supply of bolt debries for aldrop fitting - l 2.5 inch, as sample approval , supply of 6 mm pvc gitti - 100 units in 1 pack, as sample approval , cartage ,

Carpentry Item Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government