Latest carriage way Tenders | Government carriage way Tenders

Central Government/Public Sector

CTN :45429919

12 Jun, 2026 NA

Multi City - Haryana

Tender For auction sale of depot non ferrous scrap - scrap and cond.misc. aluminium scrap of pieces & cut pieces of sheets, chequered sheets,strip,window frame, doors , mouldings, pcs of ladder, aluminium board,aluminium number plate,caps of aluminium tank, aluminium conduit pipes ,etc of sorts & sizes with or w/o attachemnts, as it is, us & ur . qty = 35200.00 kg loc:-material lying at umb side of new carriage godown, beside of new carriage open shed in judw. remarks:-1. removal of fs, steel, rubber, wood and glass or any type of attachments will not be allowed and delivered will be given as it is. 2. delivery will be given by actual weight on electronic wighing scale cap-1000 kg. 3. loading by purchaser.

State Government

CTN :45417416

10 Jun, 2026 58.54 Lacs

Delhi - Delhi

Tender For n.o.w:-a/r & m/o bund and drain (mh-2711 maintenance drainage).sub work : supply of flood fighting materials at l.f.bund sonia vihar pump house for flood season 2026. - supplying and stacking of hard stone (for stone pitching) 22.5 cm thick at site., manufacturing and supply of g.i wire crates 1.00x1.00x1.00 m made out of g.i. wire of 4mm dia. interwoven and spaced 15cm. c/c including the cost of wire with all leads and carriage to the site of work, providing & filling ec bags with available earth including stitching and placing in sonia vihar store, supplying and stacking at site good earth., providing and fixing bamboo jaffery/ fencing consisting of superior quality 25 mm dia (average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of hollock wood in scantling of section 50x25 mm, fixed with nails and g.i wire on existing support complete as per direction of engineer-in-charge, total

State Government

CTN :45413511

10 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment material design erection testing commissioning for sop to ms shyam indus pvt ltd co prittam singh at vill baghni by prov 1104kv 25kva sstn aw 3ph lt line in vill baghni in e section bhadwar under esd hpsebl nurpur. t - 25 kva trsanformer, prov. distribution transformer (ordinary), 11/0.4 kv, 25 kva ., prov. steel tubular poles (9 m, working load > 200 kgf/m ) ., prov. muffs with concerete filling, prov. x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for incomer line, prov. ms angle iron (50x50x6 mm), length: (2800 mm) x1 nos for las, prov. x-arm: [channel iron (75x40x6 mm), length : (2800 mm x 4 nos] for supporting do fuse unit & go switch, prov. transformer bed, belting & knee bracing, prov. x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed, prov. x-arm [channel iron (100x50x6 mm), length : (460 mm) x 2 nos for supporting main channel of transformer], prov. ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov. ms angle iron (35x35x5 mm), length : (460 ) x 2 nos, prov. ms angle iron (50x50x6 mm), length : (950 mm) x 2 nos for bed knee bracing, prov. transformer lt distribution box and go switch fixing assembly, prov. ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov. ms angle iron (50x50x6 mm), length : (450 mm) x 1 nos, prov. go switch handle supporting: [channel iron (75x40x6 mm), length : 460 mm, prov. go ab switch unit (11kv, 400a, 25 ka ) tripple pole o/d type, prov. d.o fuse unit, prov. lighting arrester, 9 kv station class (porcelain type), prov. discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), prov. stay set complete, prov. stay wire (7/3.15 mm) (6.0 kg per stay set), prov. pipe earthing set, prov. lt distribution panel box with mccb(160a, 10ka, 4p, 1no) & sfu(32a, 5no, rewirable), prov. half clamp (m.s. flat 50x6 mm), prov. full clamps (m.s. flat 50x6 mm), prov. nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm or more (with flat and spring washers)], prov. aluminium thimble, prov. copper thimble 35 amp, prov. danger plate, prov. barbed wire, prov. lt cable (3.5 core) 50 mm , prov. energy meter 3- , 4 wire ct operated static tri-vector meter with box(ct-100a), prov. aluminum paint., prov. 6/1/3.35, 50mm ., prov. construction of foundation of transformer, erection of 25 kva s/stn. i.e. digging of pit for pole & earthing two no. poles & 3 nos. for earth drilling of holes in x-arms, preparation of plateform str. members c.i., a.l. i.e. x-arms & k.b. set, errection of d/p, concreating of rcc muff errection of plateform, errection of x-arms, d.o., l.a., mccb, switch lt box, energy meter, errection of transformer, earthing connection to g.o. switch, transformer l.a. etc., errection of stay set, jumper, pipe earthing 3 nos set, l.t. cable, barbed wire and painting complete in all respect., transportation charges @10490/-, prov. transportation charges & mannual carriage of 25 kva pole mounted distribution s/stn. (line length 0.500km), erection of 3- ph. lt line, prov. aaac (7/3.15 50mm ) { neutral conductor including 1% (sag, jumpering and wastage}, prov. steel tubular poles (8 m, working load > 200 kgf/m )., prov. muffs with concerete filling, prov. shackle insulator with d-iron, prov. lt stay set i/c egg insulator., prov. nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm or more (with flat and spring washers)], prov. stay wire, prov. g.i wire no 8swg, erection of 8 mtr. st pole single structure i.e. digging of pit, fixing of insulator, x-arms, k.b. set, top clamp, barbed wire, danger plate, drilling of holes and filling of pit + ramming complete in all respect., sagging of conductor i.e. laying, stringing and sagging & binding with insulator (single wire per km)., sagging of g.i i.e. laying, stringing and sagging & binding with insulator (single wire per km)., erection of stay set lt i.e. d

Central Government/Public Sector

CTN :45118139

01 Jul, 2026 NA

Bengaluru - Karnataka

Tender For supply of brushless dc (bldc) railway carriage fans, 110 v, dc voltage range 90-140 v dc, fixed type 400 mm sweep confirming to rdso specification no. rdso/pe/spec/tl/0021/2005 (rev.3) with amendment no.1, rcf annexure-1. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45431925

06 Jun, 2026 NA

Rohtak - Haryana

Tender For chandi(93) , indragarh , group of 2 no. of habitations annual mtc.works for water supply. - carriage of burnt motor, labour for rottor grinding and balancing, motor opening and fitting, providing and fixing of bearing 6309 make skf for motor of various split casing horizontal pumpset, providing and fixing of coller ring, providing and fixing stud for clear water and raw water pump, rewinding of clear water motor

State Government

CTN :45429479

06 Jun, 2026 NA

Rohtak - Haryana

Tender For ghuskani , jindran kalan , group of 2 no. of habitations annual mtc.works for water supply. - labour charges for opening and refitting of motor, labour charges of 7.5 hp motor pump lowering up and down with carriage to the site of work, labour for rottor grinding and balancing, providing & fixing of water seal set, providing and fixing of thrust bearing plate, replacing of gm bush, rewinding of submersible motor with including the cost of copper wire

State Government

CTN :45429577

06 Jun, 2026 NA

Rohtak - Haryana

Tender For chandi(93) , indragarh , group of 2 no. of habitations annual mtc.works for water supply. - repair of 15 hp pump including pump bush turning, making of shaft sheet, making of bearing sheet, making of impeller complete job work in all respect including labour charges of pump fitting with carriage up/down. /repair of 15 hp pump set including cost of pump sfhaft repair , making of bearing sheet , making of impler, change of stud and up and down carriage charge complet job work / at w/w in village chandi

State Government

CTN :45428632

18 Jun, 2026 NA

Kolkata - West Bengal

Tender For hiring of diesel driven motor cab (bs-iv & above) having contract carriage permit along with driver for the office of the driller in charge, cmsd-i (d), central drilling division p.h.engineering dte.

State Government

CTN :45431058

09 Jun, 2026 NA

Ananthnag - Jammu And Kashmir

Tender For carriage handling charges of store items for one financial year complete 2026-27 (under nrdwp mnp distt sector nabard m r jjm languishing shri amarnath yatra ji)2055 internal security 2215 np tanker service, capex, amrut.2, sdrf,

State Government

CTN :45397974

11 Jun, 2026 80.77 Lacs

Kota - Rajasthan

Tender For work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all lift, dewaterin

Carriage Way Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors